WAT 8575 - Washing machine BAUKNECHT - Free user manual and instructions

USER MANUAL WAT 8575 BAUKNECHT

Instructions for use

WAT 8575

GB WAT 8575

A. Programme selectorB. Option buttonsC. “Favourite” buttonD. “Temperature” buttonE. “Start delay” buttonF. “Variable spin” buttonG. “Start/Pause” buttonH. “Reset” buttonI. Display

J. Programme sequence indicatorK. “Door open” indicationL. “Button locked” indicationYour washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:M. “Water tap closed” indicationN. “Clean pump” indicationO. “Service” indication

Max.Load

Type of wash / Notes

Detergents and additives Special options StartPre-wash Main Wash Softener Pre-wash Easy Iraning Rinse Hold Intensive rinse Eco delay Variable spin Max spin speed rpm

Programme

Tempe-rature

CareLabels

kg

- for temperature selection, respect the manufacturer's recommendations on the care label

White Cotton

Kochwäsche Coton blanc

70 - 95°C 5.5

Cotton

Buntwäsche Couleurs

20 - 60°C 5.5

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

* Yes3)

* * * * * * * *

2)

*

1200

Synthetics

Pflegeleicht Synthétiques

20 - 60°C 2.5

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

* Yes3)

* * * * * * * *

2)

*

10001)

Daily load

Mischwäsche Sport 40°

20 - 60°C

3.0

Slightly to normally soiled textiles made of cotton and/or synthetics.

- Yes

* - * * * *

-

*2)

*

1200

Quick wash

Kurzwäsche Rapide

20 - 30°C 3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

- Yes

* - - *

* -

*2)

*

1200

Delicates

Feinwäsche Délicat

20 - 40°C 1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

* Yes3)

* * - *

-

*2)

*

10001)

Wool

Wolle Laine

20 - 40°C 1.0

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

- Yes

* - - *

-

*2)

*

10001)

Handwash

Handwäsche Lavage main

20 - 40°C 1.0

Textiles made of silk, linen, wool and viscose marked as “handwashable”.This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

- Yes

* - - *

-

*2)

*

4001)

Rinse & Spin

Spülen & Schleudern Rinçage & Essorage

-

-

5.5

Same as the last rinse and the final spin in the “Cotton” programme.

- - * - - *

* - - *

*

*

1200

Spin

Schleudern Essorage

-

-

5.5

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Gentle Spin

Schonschleudern Essorage court

-

-

1.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Drain

Abpumpen Vidange

-

-

-

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

optional / Yes : dosing required
For improved garment care, spin speed is restricted in these programmes. Do not use liquid detergent when activating the “Start delay”.
Do not use liquid detergent for main wash if you have activated "Prewash" option.

wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

LOCK BUTTON

You can lock the buttons of the control panel against improper use (e.g. by children).

- Press the temperature and s

simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up. - To unlock the buttons again: proceed in the same way.

RED INDICATIONS ON THE DISPLAY

"Water tap closed" The appliance has no c

the water tap: if the indications still lights up, refer to the "Troubleshooting Guide" in the Instructions for Use.

"Clean pump"

Waste water is not pumped out. Check whether the

drain nose is linked or the filter must be cleaned; in the latter case refer to the Instructions for Use ("Removing

“Filter” also refers to the instructions for use (“Homing the Filter”).

"Service"

Lighting up of the "Service" indication can be caused

by a fault in an electrical component. Refer to the "Troubleshooting Guide" in your "Instructions for Use":

if the fault persists, contact our After Sales Service.

PROGRAMME END

• The symbols of the programme sequence indicator

are dark, and the "Door open" indication lights up.

1. Turn the programme selector to the "On/On" position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the

interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

I. Press the "Start/Pause" button to pause the

programme. The light flashes.

1. Select the new programme, temperature, any options and another spin speed if you want

2. Press the "Start/Pause" button again. The new

programme continues at the same position where

the previous programme was interrupted. Do not add detergent for this programme.

add detergent for this programme.

ANCEL (RESET) A RUNNING

CANCEE (RESET) A RUNNING PROGRAMME BEFORE THE END

BEFORE THE END The "Reset" button cancels a programme before the

end.

Press the "Reset" button for at least 3 seconds. According to this description,

seconds. Any existing water is drained to lid can be opened.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

Select the desired programme, temperature, spin speed and option(s), push and hold the

"Favourites" button for at least 3 seconds.

The lamp next to "Favourites" shortly flashes and then lights up - the programme settings is saved.

xt time you want to use your individual programme

ings, select the programme, push the "Favourites

ton and start by pushing "Sart/Pause".

If you want to replace the saved programme setting by another one:

• Push the programme b

spin speed and options

hold the "Favourites" butt

START DELAY

The "Start delay" allows to run the machine at the

consumer's convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and

options.

- Press the "Start Delay" button to select the delay

• Press the "Start/Pause" button

The countdown of the delay time

symbol next to the delay time and the dot between

hours and minutes flash.

- The time delay indication disappears when the programme starts and it is replaced by the rem

programme starts and it is replaced by the remote programme time.

- Once having pressed the "Start/Pause" button,

the number of hours preselected can be reduced by pressing and holding the "Start delay" button. From

I hour on, the delay time can also be reduced by

To cancel the "Start delay"

..before you press the "Start

- Select another programme or press the “Drain/

"Reset" button.

• After having pressed the Start/Pause Button. • Press the "Reset" button for at least 3

second - the start delay time dissapears from the

display.

PROGRAMME START

Open the tap and press the "Start/Pause" button.

The indication lamp next to the "Start/Pause" button

lights up. The programme sequence indicator shows the current programme phase, running from left to right

through Wash, Rinse, Spin/Drain.

"DOOR OPEN" INDICATION

Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a

CONSUMPTION DATA
Programme	Temperature (°C)	Load (kg)	Water (l)	Energy (kWh)	Approx. Programme Duration* (hours : minutes)
White Cotton 95 5.5	55** 1.70 1:55
Cotton*** 60 5.5	49 1.02 2:25
Cotton 40 5.5 53	0.55 2:00
Synthetics 60 2.5 53	** 0.85 1:30
Synthetics 40 2.5 47	0.50 1:15
Daily load 40 3.0 43	0.48 1:00
Quick wash 30 3.0 36	0.30 0:30
Delicate 40 1.5 51	0.50 0:45
Wool 40 1.0 53	0.50 0:45
Handwash	40 1.0 43	0.50 0:35
Handwash	30 1.0 42	0.30 0:31

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label.
- ADD DETERGENTS, CLOSE THE LID AND SELECT THE PROGRAMME - This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.
Add detergent as indicated an the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. 1. Turn the programme selector to the desired programme. 2. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Variable spin” button. The light next It is particularly useful if you want to postpone spinning to a later time, or if you want to drain of If you select “Rinse Hold”, do not leave items to soak for too long. Note: The programme stops to “Rinse hold” at time the “Rinse hold” symbol on the display light The blue light under the “Start/Pause” button flashes.
to the "Start/Pause" button flashes. • Press the "Start/Pause" button; the program
SELECT ANY DESIRED OPTION will terminate automatically with the final spin cycle
When the combination of programme and additional option(s) is not possible, the indication lights switch off for the present wash programme. If you do not wish to spin the clothes, turn the
automatically. Unsuitable combinations of options are programme selector to "Drain" and press the
deselected automatically. "Start/Pause" button to start the Drain programme. "Intensive Pines" button.
- Prewash button - Only for heavily soiled leads (for example sand) - Intensive Rinse button - More water is added and rinse cycle is prolonged
Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by • More water is added and rinse cycle is prolonged. This option is particularly suitable for areas with very
approximately 15 min. soft water, washing baby linen and helping people
- Do not use liquid detergent for the main wash when with allergies.
activating the Prewash option. "Eco" Button With a modified temperature profile and a slightly
- "Easy Ironing" Button - Can be used together with "Cotton", "Synthetics" - With a modified temperature profile and a slightly prolonged washing duration, the optimum
Can be used together with "Cotton", synthetics and "Daily load" programmes to make ironing easier.
• Increases the water quantity and the clothes are spun lower energy consumption is achieved.
very gently. "Variable spin" button
• Rinse Hold" button • Every programme has a predefined spin speed. • Press the button to set another spin speed.
- The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing • If spin speed "0" is selected, the final spinning is
progressing to the final spin cycle to avoid creasing and prevent colours from changing. cancelled but intermediate spin peaks remain down
the rinse. The water is drained out only.

ADD DETERGENTS, CLOSE THE LID AND

Add detergent as indicated an the front page and as described in the chapter "Detergent and Additives" in your Instructions for Use.
I. Turn the programme selector to the desired

programme. 2. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Variable spin” button. The light next to the “Start/Pause” button flashes.

SELECT ANY DESIRED OPTION

When the combination of programme and additional

option(s) is not possible, the indication lights switch off

automatically. Unsuitable combinations of options are deselected automatically.

"Prewash" button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by

approximately 15 min.

- Do not use liquid detergent for the main wash whe activating the Prewash option.

“Easy ironing” button