VB-M50B - Surveillance Camera CANON - Free user manual and instructions
Find the device manual for free VB-M50B CANON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Surveillance Camera |
| Model | VB-M50B |
| Brand | Canon |
| Dimensions (W x H x D) | 68 mm x 55 mm x 115 mm |
| Weight | Approx. 280 g |
| Power Supply | PoE (IEEE 802.3af) |
| Image Sensor | 1/3" CMOS |
| Resolution | Up to 1920 x 1080 (Full HD) |
| Lens | Fixed, 2.8 mm, F2.0 |
| Angle of View | Horizontal: 90°, Vertical: 50° |
| Video Compression | H.264, MJPEG |
| Day/Night Mode | Mechanical IR cut filter |
| Minimum Illumination | 0.05 lux (color), 0 lux (IR on) |
| Audio | Two-way audio (mic and speaker not built-in, requires external) |
| Network Interface | 10/100 BASE-TX (RJ-45) |
| Supported Protocols | IPv4, IPv6, TCP/IP, UDP, HTTP, HTTPS, FTP, SMTP, NTP, RTP, RTSP, DHCP, DNS |
| Security | Password protection, IP address filtering, HTTPS encryption |
| Motion Detection | Yes (built-in) |
| Storage | MicroSD card slot (up to 128 GB), NFS, FTP upload |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 20% to 85% (non-condensing) |
| Certifications | CE, FCC, RoHS |
| Included Accessories | Installation guide, CD-ROM (User Manual), screw kit |
Frequently Asked Questions - VB-M50B CANON
How do I reset the Canon VB-M50B to factory defaults?
Press and hold the reset button (located near the LAN port) for about 10 seconds using a paper clip. The camera will reboot and restore all factory settings.
What is the default IP address of the VB-M50B?
The default IP address is 192.168.0.100. However, if your network uses DHCP, the camera will obtain an address automatically. You can find it using the Canon VB Viewer software.
Can I use the VB-M50B without PoE?
No, the VB-M50B requires Power over Ethernet (PoE) according to IEEE 802.3af. A PoE injector or PoE switch is necessary.
How do I access the camera remotely?
You need to set up port forwarding on your router for ports 80 (HTTP) and 554 (RTSP). Then use the public IP address or a DDNS service to access the camera via a web browser or app.
Does the VB-M50B support night vision?
Yes, it has built-in infrared LEDs with a range of approximately 10 meters. It switches automatically to black-and-white mode in low light.
How can I record video from the VB-M50B?
You can record to a MicroSD card (up to 128 GB) inserted in the camera, or set up FTP upload to a server. Alternatively, use NVR software that supports RTSP streams.
What software do I need to configure the camera?
Canon provides VB Viewer and VB Administrator tools for configuration and live viewing. They are available on the included CD-ROM or from Canon's support website.
How do I clean the lens of the VB-M50B?
Use a soft, dry microfiber cloth to gently wipe the lens. Do not use any abrasive cleaners or liquids, as they may damage the coating.
Is the VB-M50B waterproof?
No, this camera is designed for indoor use only. It should not be exposed to rain or moisture. For outdoor use, consider a weatherproof housing.
How do I update the firmware on the VB-M50B?
Download the latest firmware from the Canon website. Access the camera's web interface, go to Maintenance > Firmware Update, and upload the file. Do not power off the camera during the update.
User questions about VB-M50B CANON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual VB-M50B - CANON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VB-M50B by CANON.
USER MANUAL VB-M50B CANON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CANON
Model : VB-M50B
Category : Surveillance Camera