PCS200R - Server LG - Free user manual and instructions
Find the device manual for free PCS200R LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Tower or rack server |
| Brand | LG |
| Model | PCS200R |
| Dimensions (H x W x D) | 43 x 130 x 360 mm |
| Weight | Approximately 5.5 kg |
| Power supply | Internal 150 W power supply, input 100-240 V AC |
| Processor | Intel Celeron or equivalent, 2 cores, 2.0 GHz |
| RAM memory | 4 GB DDR3, expandable up to 16 GB |
| Storage | SATA hard drive 500 GB (7200 rpm) |
| Connectivity | 2 Gigabit Ethernet ports, 4 USB 2.0 ports, 1 VGA port |
| Supported operating system | Windows Server, Linux (Ubuntu, CentOS) |
| Main functions | File server, print server, email, light virtualization |
| Noise level | < 35 dB(A) in normal operation |
| Operating temperature | 10 °C to 35 °C |
| Operating humidity | 20% to 80% non-condensing |
| Maintenance and cleaning | Dust the exterior with a soft cloth, do not use chemical products |
| Safety | Adequate ventilation, do not block vents; optional Kensington lock |
| Spare parts and repairability | Hard drive, memory, fan replaceable; other parts on request |
| Warranty | 2 years, extension possible |
Frequently Asked Questions - PCS200R LG
How to reset the LG PCS200R server to factory settings?
To reset the server, access the BIOS by pressing F2 at startup, then select the Restore Defaults option. Confirm and restart. Note: this operation erases all custom settings.
Which operating system can I install on the PCS200R?
The server supports Windows Server (2012 R2, 2016, 2019) and Linux distributions such as Ubuntu Server 20.04 LTS or CentOS 7. Ensure you have the appropriate drivers.
How to expand the server's RAM memory?
The PCS200R uses DDR3 non-ECC memory. It has two slots. To expand, purchase a compatible module (e.g., 8 GB) and insert it into a free slot after disconnecting the power.
The server does not start, what to do?
First check that the power cable is properly connected and that the outlet works. If the power indicator is off, try another cable. If the indicator is on but nothing displays, reset the BIOS by removing the CMOS battery for a few minutes.
How to clean the server?
Turn off the server and unplug it. Use a slightly damp soft cloth to clean the exterior. For the interior, use compressed air to dust the fans and ventilation grilles. Never use solvents.
Can I replace the hard drive myself?
Yes, the hard drive is accessible after removing the side panel. Disconnect the server, remove the defective drive, and insert a new SATA drive of the same form factor (2.5 inches). Screw it in and reconnect.
How to configure the server as a file server?
Install an operating system, then enable the File Server role under Windows or install Samba under Linux. Create shared folders and set user permissions.
The server makes noise, is this normal?
A slight fan noise is normal. If the noise becomes loud or irregular, check that air flows freely and that the fans are not obstructed. A clicking noise may indicate a failing hard drive.
How to access the BIOS of the PCS200R?
Press the F2 key several times immediately after turning on the server. The BIOS menu appears. Navigate with the arrow keys. F10 to save and exit.
What is the power consumption of the server?
Typical consumption is about 50-60 W under light load and up to 100 W under full load. It is recommended to use a stabilized power supply.
User questions about PCS200R LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual PCS200R - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PCS200R by LG.
USER MANUAL PCS200R LG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LG
Model : PCS200R
Category : Server