Flash Cube - Loudspeaker ION - Free user manual and instructions

Product Type	Portable Wireless Speaker
Brand	ION
Model	Flash Cube
Dimensions (L x W x H)	Approximately 8 x 8 x 8 cm
Weight	Approximately 320 g
Power	Built-in rechargeable battery, charges via USB-C
Battery Life	Up to 10 hours
Connectivity	Bluetooth 5.0, 3.5 mm auxiliary input
Main Functions	Wireless audio playback, built-in speaker, playback controls, built-in microphone for hands-free calls
Additional Features	Built-in LED lighting, splash resistant (IPX4)
Care and Cleaning	Clean with a soft, dry cloth. Do not use abrasive products.
Safety	Do not expose to continuous water, do not open the casing, avoid shocks
Spare Parts and Repairability	Not user serviceable. Contact customer service if needed.
General Information	User manual available for download on notice-facile.com

Frequently Asked Questions - Flash Cube ION

How do I connect my phone to the Flash Cube via Bluetooth?

Enable Bluetooth on your phone, then turn on the speaker. The Flash Cube will appear in the list of devices as 'ION Flash Cube'. Select it to pair.

How do I charge the Flash Cube?

Use the included USB-C cable and plug it into a power adapter (not included) or a computer USB port. The indicator light shows charging.

How long does the battery last?

Battery life can reach 10 hours of continuous playback at moderate volume. It varies based on volume and LED light usage.

Can I use the Flash Cube in hands-free mode?

Yes, the Flash Cube has a built-in microphone. During an incoming call, press the play button to answer. Sound will come through the speaker.

What should I do if the sound is distorted or stuttering?

Check that the audio source is nearby (less than 10 meters) and that no obstacles are interfering. Reduce the volume or move other wireless devices away.

Is the Flash Cube waterproof?

It has an IPX4 rating, which protects against splashes. Do not immerse it or expose it to rain.

How do I turn the speaker on/off?

Press and hold the power button for 2 seconds to turn on or off. A confirmation sound will be heard.

Can I connect two Flash Cubes in stereo mode?

The Flash Cube model does not support stereo pairing. It operates in mono only.

How do I reset the Flash Cube to factory settings?

Turn off the device. Press and hold the '+' and '-' buttons simultaneously for 5 seconds until the light flashes. Pairing information will be erased.

Where can I find the full manual?

The manual is available for free download in PDF format on the website notice-facile.com in the product sheet for the ION Flash Cube.

USER MANUAL Flash Cube ION

Quickstart Guide English (3-6)

Appendix English (27)

Quickstart Guide (English)

Introduction

1. Make sure all items listed in the Box Contents section are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.

Box Contents

Flash Cube

Remote Control

1/8" Stereo Aux Cable

Quickstart Guide

Safety & Warranty Information Booklet

Support

For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

Quick Setup

Connection Diagram

Items not listed in the Box Contents section are sold separately.

Remote Control

1. LEDs On/Off
2. LED Mode Select
3. LED Color Select
4. Bluetooth ^® Connecting
5. Power On/Off
6. Play/Pause
7. Previous Track *
8. Next Track *
9. Volume Up
10. Volume Down

* Note: With some apps, pressing the Previous Track button or Next Track button may go to another playlist or music genre.

Bluetooth Connecting with Flash Cube

1. Press and hold the power button for two seconds to power on Flash Cube.
2. Press and release the Bluetooth Connecting button to enter Connecting Mode. Flash Cube's Bluetooth LED will blink during the connection process.
3. Navigate to your device's Bluetooth setup screen, find Flash Cube, and connect. Flash Cube's Bluetooth LED will light up solid when it is connected.
   Note: If you experience trouble in connecting, select Forget this Device on your Bluetooth device and try to connect again.
4. To disconnect, hold the Bluetooth Connecting button on Flash Cube for 3 seconds.

Speaker Linking

To link two Flash Cubes together:

1. Power on each Flash Cube.
2. If necessary, disconnect previous Bluetooth connections by holding down the Bluetooth Connecting button for 3 seconds.
3. Press and release the Link button on each Flash Cube. Flash Cube's Link LED will blink and a beeping tone will sound on each Flash Cube during the linking process. Linking may take up to a minute. Once the two Flash Cubes are fully linked, the Link LEDs on both Flash Cubes will be lit solid.
4. Press and release the Bluetooth Connecting button on the Flash Cube that you want to be the master (left channel).
5. Navigate to your device's Bluetooth setup screen, find Flash Cube, and connect. The speakers will re-link automatically the next time they are both powered on.
6. To disconnect linking, hold the Link button on the master Flash Cube for 5 seconds.

Note: When using the remote, there will be a response delay of a few seconds with the play and pause commands.

Features

Front Panel

1. Next Track: Press and release this capacitive touch button to skip to the next track.

2. Power: Press and hold this capacitive touch button for 2 seconds to power Flash Cube on or off.
   Note: Flash Cube will power off after 1 hour if no audio is playing and there is no Bluetooth connection.

3. Volume Down: Press and release this capacitive touch button to decrease the speaker volume.
4. Volume Up: Press and release this capacitive touch button to increase the speaker volume.
5. Play/Pause: Press and release this capacitive touch button to play or pause the sound source.

Note: With some apps, pressing the Next Track button may go to another playlist or music genre.

1. Light Mode: Press and release this capacitive touch Light Mode button to toggle through these different options:

2. Color Cycle: The lights slowly glow and cycle through colors. This is the default mode when Flash Cube is first powered on. Once the speaker is powered on, the lights will turn on before any music starts.

3. Beat Sync: The lights react to the beat of the music.
   • OFF: The lights are turned off.

4. Volume LEDs: These LED segments light up as the volume control is adjusted.

5. Tweeter: Outputs the high frequencies of the sound source.
6. Woofer: Outputs the low frequencies of the sound source.

Rear Panel

1. Link: Press this button on both speakers to link two Flash Cubes together. Refer to Quick Setup > Speaker Linking for more details.
2. Link LED: When linking two Flash Cubes, this LED will blink on both Flash Cubes during the linking process. Once fully linked with another Flash Cube, this LED will remain solid on both Flash Cubes.
3. Bluetooth Connecting: Press this button to pair to your Bluetooth device. For more details, refer to Quick Setup > Bluetooth Connecting with Flash Cube.
4. Bluetooth LED: This LED blinks when pairing with a Bluetooth device. Once fully paired, the LED will remain solid.
5. Aux Input: Connect a media player, smartphone, or other audio source to this stereo 1/8" input.
6. Power Cable: This power cable is hard-wired into Flash Cube.
7. Bass Port: Adds increased bass to the sound.

Assistance technique

Snelstartgids (Nederlands)

Inleiding

Appendix (English)

Technical Specifications

Output Power	50 W (peak)
Supported Bluetooth Profile	A2DP
Bluetooth Range	Up to 100' / 30.5 m *
Linked Range	Up to 50' / 15.2 m *
Power	Input voltage: 100-120V AC, 60 Hz; 220-240V AC, 50 Hz
Dimensions(width x depth x height)	10.6" x 10.02" x 10.6"26.9 cm x 25.4 cm x 26.9 cm
Weight	9.6 lbs.4.37 kg

Specifications are subject to change without notice.
* Bluetooth range is affected by walls, obstructions, and movement. Best performance is achieved in a wide open area.
** Battery life may vary based on temperature, age, and volume usage of product.

Trademarks and Licenses

ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license.

All other product or company names are trademarks or registered trademarks of their respective owners.

ionaudio.com