FastCare GC7705 - Iron PHILIPS - Free user manual and instructions

Product type	Steam iron
Brand	Philips
Model	FastCare GC7705
Power supply	220-240 V, 50-60 Hz
Power	2400 W
Technology	OptimalTEMP: no temperature adjustment, suitable for all ironable fabrics without adjustment
Soleplate	SteamGlide (ceramic) – glides easily and resists scratches
Water tank	300 ml
Continuous steam output	50 g/min
Steam boost output	220 g/min
Vertical steam function	Yes
Anti-calc	Yes, integrated anti-calc system
Descaling cleaning	CalcClean function for easy descaling
Automatic safety shut-off	Yes, after inactivity
Cord length	2 m
Dimensions (W x D x H)	27.5 x 12.5 x 15 cm (approx.)
Weight	1.5 kg (approx.)
Included accessories	Measuring cup, user manual

Frequently Asked Questions - FastCare GC7705 PHILIPS

How to use the vertical steam function on the Philips FastCare GC7705?

Fill the tank, plug in the iron and wait until it is ready (light on). Hold the iron vertically a few centimeters from the garment and press the steam boost button to release a powerful steam jet. Ideal for refreshing curtains, suits or dresses without laying them on the ironing board.

What to do if the iron does not produce steam?

Check if the tank has enough water. If the iron is cold, wait for preheating (the light stops). If the problem persists, perform a descaling with the CalcClean function: fill the tank, set steam to maximum and hold the CalcClean button for a few seconds. The steam and limescale deposits will be expelled.

How to clean the Philips FastCare GC7705 iron?

Unplug and let cool. Clean the soleplate with a damp cloth, without abrasive products. Use the CalcClean function to descale regularly: fill the tank, place the iron over a sink, plug it in and hold the CalcClean button until all water with impurities is expelled.

Can I iron all types of fabrics with this iron?

Yes, thanks to OptimalTEMP technology, the iron automatically adjusts the temperature for all ironable fabrics: cotton, linen, silk, wool, synthetics, etc. You do not need to adjust the temperature or sort laundry. However, avoid non-ironable fabrics (e.g., rubber).

What does the flashing light mean?

The blue light flashes during preheating. When it stays on steadily, the iron is ready. If it flashes after use, it may indicate automatic safety shut-off: the iron turned off after 8 minutes of inactivity in vertical position or 30 seconds in horizontal position. Straighten the iron to reactivate it.

How to fill the water tank?

Use the provided measuring cup. Open the tank cover at the front of the iron. Pour tap water or distilled water (preferably to reduce scale). Do not exceed the maximum level indicated (300 ml). Close the cover tightly.

The iron has a burnt smell on first use, is this normal?

Yes, it's normal. First uses may emit a slight odor due to burning of manufacturing residues. Ventilate the room and run the iron over an old cloth for a few minutes to eliminate these odors.

How to avoid white marks on laundry?

White marks are caused by limescale in the water. Use distilled or demineralized water. Regularly descale using the CalcClean function. Do not overfill the tank and do not iron at too high a temperature with very hard water.

Can I use the iron without water?

Yes, you can dry iron if you do not use the steam function. Just be careful not to activate the steam buttons without water to avoid damaging the heating element. The soleplate will remain hot for dry ironing.

How to store the iron after use?

Unplug the iron and let it cool completely. Empty the water tank to avoid leaks and scale buildup. Wrap the cord around the base of the iron, store it upright on its heel in a dry, safe place out of reach of children.

USER MANUAL FastCare GC7705 PHILIPS

Always here to help you

Register your product and get support at

www.philips.com/welcome

GC7700 series

IMPORTANT

• Perform the Calc-Clean process regularly for great steam performance and a prolonged lifetime of your appliance (Fig. 1).
• Recommended water to use: distilled or demineralised water (Fig. 2).

IMPORTANT

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Read this user manual, the important information leaflet, and the quick start guide on the packaging carefully before you use the appliance. Save them for future reference.

General description (Fig. 3)

1 'Iron ready' light 2 Calc-Clean button with Calc-Clean light 3 Steam trigger 4 Temperature dial 5 Heel 6 Supply hose 7 Cord storage facility 8 On/off switch 9 Carry lock 10 Mains cord 11 Mains plug 12 Hose storage compartment 13 Detachable water tank 14 Filling hole 15 MAX indication 16 Water tank release button 17 Water tank handle 18 Smart Calc-Clean container

Setting the temperature

To set the required ironing temperature, turn the temperature dial to the appropriate position. The appliance adjusts the steam automatically, depending on the ironing temperature set.

Temperature setting Automatic steam setting Fabric type

SYNTH to ●		Synthetic fabrics (e.g., acetate, acrylic, nylon, polyamide).
●●		Wool, viscose, polyester and silk.
●●● to LINEN		Cotton, linen

Recommended water to use: distilled or demineralised water

Your appliance has been designed to be used with tap water. If you live in an area with hard water, fast scale build-up may occur. It is therefore recommended to use distilled or demineralised water to prolong the lifetime of your appliance.

Do not add perfume, water from the tumble dryer, vinegar, ironing aids, chemically descaled water or other chemicals, as they may cause water spitting, brown staining or damage to your appliance.

IMPORTANT - Cleaning and maintenance

Smart Calc-Clean System

Your appliance has been designed with a Smart Calc-Clean system to ensure that descaling and cleaning is done regularly. This helps to maintain a strong steam performance and avoids dirt and stains coming out of the soleplate over time. To ensure that the cleaning process is performed, the steam generator gives regular reminders. Besides that, a second defence step to protect the steam generator from scale is integrated: the steam function gets disabled if descaling is not done after 1 hour steam ironing once the reminder came up. After descaling is done, the steam function will be restored. This takes place regardless of the type of water used.

Sound and light Calc-Clean reminder

• After 1 to 3 months of use, the Calc-Clean light starts flashing and the appliance starts beeping to indicate that you have to perform the Calc-Clean process (Fig. 4).
• You can continue steam ironing for 1 hour while the Calc-Clean light flashes and the appliance beeps. After 1 hour, the steam function is automatically disabled. You have to perform the Calc-Clean process before you can continue steam ironing. (Fig. 5)

Tip: You can continue to dry iron by not pressing the steam trigger.

Performing the Calc-Clean process with the Calc-Clean container

Do not leave the appliance unattended during the Calc-Clean process.

Caution: Do not interrupt the process by lifting the iron up from the Calc-Clean container, as hot water and steam will come out of the soleplate.

1 Fill up the water tank halfway. Consult the separate quick start guide for instructions on how to detach the water tank (Fig. 6). 2 Make sure that the appliance is plugged in and switched ON during the Calc-Clean process (Fig. 7). 3 Turn the temperature dial to Calc-Clean (Fig. 8). 4 Place the Calc-Clean container on the ironing board or any other even, stable surface (Fig. 9). 5 Place the iron stably on the Calc-Clean container.

Note: The Calc-Clean container has been designed to collect scale particles and hot water during the Calc-Clean process. It is perfectly safe to rest the iron on this container during the entire process.

6 Press and hold the Calc-Clean button for 2 seconds until you hear short beeps (Fig. 10).

7 During the Calc-Clean process, you hear short beeps and a pumping sound. Wait approximately 2 minutes for the appliance to complete the process (Fig. 11).

8 When the Calc-Clean process is completed, the iron stops beeping (Fig. 12).

9 Wipe the iron with a piece of cloth and put it back on the base station (Fig. 13).

10 As the Calc-Clean container becomes hot during the Calc-Clean process, wait approx. 5 minutes before you touch it.

11 If necessary, you can repeat steps 1 to 11. Make sure that you empty the Calc-Clean container before you start the Calc-Clean process.

Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has accumulated inside the iron. This is normal.

Safety auto-off mode (specific types only)

• To save energy, the steam generator switches off automatically when it has not been used for 15 minutes. The 'iron ready' light flashes.
• To reactivate the steam generator, set the on/off switch to 'off' position and then to 'on' position.

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron does not produce any steam.	There is not enough water in the water tank.	Fill the water tank beyond the MIN indication. Press and hold the steam trigger until steam comes out. It may take up to 30 seconds until steam comes out.
	You have not pressed the steam trigger.	Press and hold the steam trigger until steam comes out.
	You have set the temperature dial to ●.	Turn the temperature dial to ●● or higher.
	The steam function has been disabled until you have performed the Calc-Clean process.	Perform the Calc-Clean process to restore the steam function (see chapter ‘IMPORTANT - Cleaning and maintenance’).
	You have not placed the water tank in the appliance properly.	Slide the water tank into the appliance until it locks into place (‘click’).
The Calc-Clean light flashes and the appliance beeps.	This is the Calc-Clean reminder.	Perform the Calc-Clean process within 1 hour after the Calc-Clean reminder is given.
The Calc-Clean light flashes and/or the appliance beeps.	You have not done or have not completed the Calc-Clean process.	Perform the Calc-Clean process to enable the steam function again (see chapter ‘IMPORTANT - Cleaning and maintenance’).
The Calc-Clean light flashes and the appliance beeps every time I press the steam trigger. No steam comes out of the soleplate.	You have not done or have not completed the Calc-Clean process.	Perform the Calc-Clean process to enable the steam function again (see chapter ‘IMPORTANT - Cleaning and maintenance’).
Problem Possible cause Solution
The appliance has switched off.	The safety auto-off function was activated. This happens automatically when the steam generator has not been used or the steam trigger has not been pressed for more than 15 minutes.	Set the on/off switch to 'off' position and then to 'on' position.
The appliance produces a loud pumping sound.	The water tank is empty. Fill the water tank with water and press the steam trigger until the pumping sound becomes softer and steam comes out of the soleplate.
Water droplets come out of the soleplate.	After the Calc-Clean process, remaining water may drip out of the soleplate.	Wipe the soleplate dry with a piece of cloth. If the Calc-Clean light still flashes and the appliance still beeps, perform the Calc-Clean process (see chapter 'IMPORTANT - Cleaning and maintenance').
	The Calc-Clean process has not been completed.	You have to perform the Calc-Clean process again (see chapter 'IMPORTANT - Cleaning and maintenance').
Dirty water and impurities come out of the soleplate.	Impurities or chemicals present in the water have deposited in the steam vents and/or soleplate.	Perform the Calc-Clean process regularly (see chapter 'IMPORTANT - Cleaning and maintenance').
Water flushes out of the soleplate.	You have accidentally started the Calc-Clean process (see chapter 'IMPORTANT - Cleaning and maintenance').	Switch off the appliance. Then switch it back on again. Turn the temperature dial to the desired temperature setting instead of CÁLC CLEAN. Let the iron heat up until the 'iron ready' light lights up steadily.
The Calc-Clean process does not start.	You have not set the temperature dial to Calc-Clean or you have not waited for the iron to heat up.	See chapter 'IMPORTANT - Cleaning and maintenance'.
	You have not pressed the Calc-Clean button for 2 seconds until the appliance started beeping.	See chapter 'IMPORTANT - Cleaning and maintenance'.
There are water droplets visible in the appliance when I detach the water tank.	Water comes from the water path between the water tank and stand. This is normal.	These water droplets are harmless. If you want, you can wipe away the water droplets with a dry cloth.

Problem Possible cause Solution

Steam output is low.	You do not press the steam trigger continuously.	Keep the steam trigger pressed continuously when you move the iron over the fabric.
Steam does not come out immediately when I press the steam trigger.	Water is converted into steam in the soleplate. When you press the steam trigger, it will take 1 to 2 seconds until steam is generated and released. This is normal.	Keep the steam trigger pressed continuously when you move the iron over the fabric.

Introduction