1 G Electronic Glass - Kitchen scale TERMOZETA - Free user manual and instructions

Product Type	Digital Kitchen Scale
Brand	Termozeta
Model	1 G Electronic Glass
Platform Material	Tempered Glass
Maximum Capacity	5 kg (11 lb)
Graduation	1 g / 0.1 oz
Dimensions (L x W x H)	20 x 15 x 2 cm
Net Weight	0.5 kg
Power Supply	2 x AAA batteries (not included)
Auto-Off	Yes, after 2 minutes of inactivity
Tare Function	Yes
Unit Conversion	g, kg, oz, lb:oz, ml (water), fl.oz (water)
Overload Indication	Yes, "Err" display
Low Battery Indication	Yes, "Lo" display
Display Type	LCD, clear digits
Cleaning	Wipe with a soft damp cloth; do not immerse in water
Safety Features	Non-slip feet, overload protection, automatic shut-off
Spare Parts Available	Batteries (standard AAA)
Repairability	Not user-serviceable; contact authorized service center
Intended Use	Household kitchen use only

Frequently Asked Questions - 1 G Electronic Glass TERMOZETA

How do I change the battery in my Termozeta 1 G Electronic Glass scale?

Locate the battery compartment on the bottom of the scale. Slide the cover open, remove the old batteries, and insert two new AAA batteries (not included) with correct polarity. Close the cover securely.

What is the maximum weight this scale can measure?

The maximum capacity is 5 kg (11 lb). Exceeding this will display an 'Err' overload indication.

How do I use the tare function?

Place an empty container on the scale and press the TARE button. The display will reset to zero. Then add the ingredient to measure only its weight.

Can I measure liquids with this scale?

Yes, the scale has a water volume mode. Select the ml or fl.oz unit, and for water at room temperature, the weight-to-volume conversion is accurate.

Why does my scale turn off automatically?

The scale has an auto-off feature to save battery. It will shut down after approximately 2 minutes of inactivity. Simply press the ON/OFF button to restart.

How do I switch between grams and ounces?

Press the UNIT button repeatedly to cycle through available units: g, kg, oz, lb:oz, ml, fl.oz. The display will show the current unit.

What does 'Lo' mean on the display?

'Lo' indicates low battery. Replace the AAA batteries with new ones to restore normal operation.

How do I clean the glass platform?

Use a soft damp cloth to wipe the glass surface. Do not use abrasive cleaners or immerse the scale in water. Avoid getting liquid into the battery compartment.

Is the scale accurate for small amounts like 1 gram?

Yes, the scale has a division of 1 g, so it can accurately measure weights as low as 1 gram. For best accuracy, place the item in the center of the platform.

Can I use this scale for commercial purposes?

No, this scale is designed for household kitchen use only and should not be used for commercial or industrial applications.

USER MANUAL 1 G Electronic Glass TERMOZETA

TECHNICAL DATA

TECHNICAL DATA

TECHNICAL DATA

1G ELECTRONIC GLASS

Type 420007

1. Battery compartment
2. Scales base
3. Scales plate

GB

DESCRIPTION

1. Control panel

This manual is an integral part of the appliance and must be carefully read before use since it contains important information on the safety, installation, use and maintenance. Keep in a safe place.

• After removing the package, make sure the appliance is undamaged. - Do not leave parts of package (carton, box) within reach of children or persons with reduced mental capacities, since these are potential sources of danger. - This appliance was exclusively designed for domestic use as kitchen scales. Any other use is considered improper. - TERMOZETA cannot be held responsible for any damage caused by improper, incorrect and negligent use. - Contact a service centre authorised by the company for any repairs and ask for original spare parts. - If you decide to no longer use the appliance, make any dangerous parts harmless, especially for children who may use the appliance to play with. - To dispose of the appliance and the batteries, please follow the regulations in force in your town.

BATTERY INSERTION AND REPLACEMENT

To replace the battery, please proceed as follows:

• Remove the cover of the battery compartment (2), which is located under the appliance; take out the flat battery.
• Insert the new battery, observing the polarity. Then close the cover.

IMPORTANT!

Used batteries must be disposed of carefully. Please follow the regulations in force in your town. If the scales are not used for a long time, we recommend removing the battery.

INSTRUCTIONS FOR USE

SCALES OPERATION

• Rest the scales on a flat and stable surface.
• If necessary, place the bowl where the food must be weighed on the scales before turning on the appliance.
• Press and release the ON/OFF key (e) to turn on the appliance.

When the appliance is turned on, the display appears as shown in the picture beside.

After about 3 seconds, the value "0" is displayed and the scales are ready to weigh.

Proceed with the weighing operation.

SUGGESTIONS

Any container can be used for weighing operations, or it is also possible to rest the weight directly on the scales plate (4).

If you are using a container, remember to position it on the scales plate (4) before turning on the appliance so that the weight reference will be zero when the appliance is turned on.

WEIGHT UNIT CONVERSION

The scales include both metric (kilograms, grams) and Imperial systems (pounds, ounces). You can press the g/oz key (d) to convert between the two systems during the weighing operation.

"TARE" FUNCTION

To weigh different loads consecutively without removing them from the bowl or from the scales plate (4), put the first load on the plate and read the weight. Press the TARE key (a) to reset the reading of the display (c) before adding the next load. It is possible to repeat this operation. It is also possible to use the "TARE" function to reset the weight of a container. In this case, turn on the scales, put an empty container on the scales plate (4) and press the TARE key (a). The display is reset and, once the food has been placed on the scales, will show its weight.

Every tare value is shown as a negative number once the corresponding weight has been removed from the appliance. Pressing the TARE key (a), the display will show "0" again.

"HOLD" FUNCTION

To use this function proceed as follows:

• Press the ON/OFF key (e) to turn on the scales.
• Put the load on the scales.
• Press the HOLD key (b).
• The scales will show the detected weight for 5 seconds. To reset the value, press the HOLD key (b) again.

WARNING INDICATORS

1) Overload

If the weight of the loads is higher than the maximum capacity of the scales (5 kg), "OL" (overload) will appear on the display. Remove the load immediately to allow the scales to work normally.

2) Flat battery

When the battery is flat, the display shows the battery symbol.

Replace the

AUTO SHUT OFF

The scales shut off automatically if not used for 30 seconds.

MANUAL SHUT OFF

To optimize battery life, press the ON/OFF key (e) to turn the scales off after use.

CLEANING AND MAINTENANCE

Clean the scales with a slightly damp cloth.

IMPORTANT!

• Never immerse your scales in water or other liquids.
• Never use chemical or abrasive cleaning agents.
• All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavoured or coloured foods. Avoid contact with acid citrus juices.
• Always use the scales on a hard, flat surface. DO NOT use on carpets.

In accordance with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal.

• The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
• Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis.
• The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimises the recycling and reuse of components making up the apparatus.
• Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.