RX-V679 - Receiver YAMAHA - Free user manual and instructions

Product type	7.2-channel AV receiver
Brand	Yamaha
Model	RX-V679
Output power	115 W per channel (8 ohms, 20 Hz-20 kHz, 0.09% THD)
Number of channels	7.2
Supported audio formats	Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS 96/24
HDMI inputs	6 (compatible with 4K/60p, 3D, ARC)
HDMI output	1 (with ARC)
Network connectivity	Wi-Fi (IEEE 802.11 b/g/n), Ethernet
Bluetooth	Built-in (Version 2.1 + EDR)
Streaming services	AirPlay, Spotify Connect, vTuner
Acoustic calibration	YPAO (Yamaha Parametric Acoustic Optimizer)
Radio	FM/AM (40 preset stations)
Dimensions (W x H x D)	435 x 171 x 370 mm
Weight	10.5 kg
Power consumption	400 W (standby 0.1 W)
Power supply	220-240 V, 50/60 Hz
Care and cleaning	Clean with a soft dry cloth. Do not use chemical products.
Safety	Do not expose to moisture or heat sources. Unplug before cleaning.
Included accessories	Remote control, YPAO microphone, FM/AM antennas, batteries
Repairability	Repairability index not provided by manufacturer

Frequently Asked Questions - RX-V679 YAMAHA

How to connect my TV to the receiver?

Connect the HDMI output of your TV to the HDMI input of the receiver. Use the ARC function if your TV is compatible to transmit sound from the TV to the receiver.

How to configure the speakers?

Use the supplied YPAO microphone. Place it at the listening position, then start automatic calibration via the menu. The receiver will adjust levels and distances.

No sound is coming out, what to do?

Check that the speakers are properly connected and the receiver is on the correct source. Make sure the volume is not muted or too low.

How to connect my phone via Bluetooth?

Enable Bluetooth on the receiver (Bluetooth button on remote). On your phone, search for 'Yamaha RX-V679' and pair.

Can I listen to streaming music?

Yes, the receiver supports AirPlay, Spotify Connect, and internet radio via vTuner. Connect it to your Wi-Fi network and use the Yamaha AV Setup app.

How to reset the receiver?

Press and hold the 'Straight' button and press the 'Power' button to turn on the unit. 'Advanced Setup' appears, then turn the program selector to 'Initialize' and confirm.

Which HDMI cables are recommended?

Use high-speed HDMI cables compatible with 4K/60p for best performance. Standard cables may limit bandwidth.

How to update the firmware?

Connect the receiver to the Internet. Go to 'Setup' > 'Network' > 'Update'. Follow on-screen instructions. Do not turn off power during update.

What to do if the remote does not work?

Check the batteries. If problem persists, point the remote at the receiver's sensor. Remove obstacles. You can also use the Yamaha AV Setup app.

How to connect a subwoofer?

Connect the subwoofer to the SUBWOOFER output of the receiver. Use an RCA cable. Make sure the subwoofer is powered on and volume is set.

USER MANUAL RX-V679 YAMAHA

Home Audio Network with MusicCast

MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC, NAS drive and music streaming service anywhere in your house with one easy-to-use app. For more details and a lineup of MusicCast compatible products, visit our website.

Diagram of a central device connected to eight peripheral devices (no text or symbols)

musicCast

Key features

• Seamlessly control all MusicCast compatible devices with the dedicated "MusicCast CONTROLLER" app.
• Link a MusicCast compatible device to another device in a different room and play them back simultaneously.
• Play back music from music streaming services. (The compatible music streaming services may differ depending on your region and product. Refer to the product information on our website for details.)

■ Preparation of the devices

Mobile device (smartphone, etc.)

To use the network features on the MusicCast compatible device, you need the dedicated app "MusicCast CONTROLLER" for the operation. Search for the free app "MusicCast CONTROLLER" on App Store (for iOS devices) or Google Play (for Android devices) and install it to your device.

For details, refer to the instructions for this app in each store.

Connect the mobile device in which MusicCast CONTROLLER has been installed to the wireless router in your home.

If your router supports multiple SSID's (network names), connect the mobile device to the first access point ("SSID 1", etc.)

Setting of the devices and playback

Create the following network (MusicCast Network) using the MusicCast CONTROLLER app.

graph TD
    A["Mobile Device"] -->|Wireless Signal Wave| B["Wireless Router"]
    C["Smart Speaker"] -->|Wireless Signal Wave| B
    D["Radio System"] -->|Wireless Signal Wave| B
    E["Audio Player"] -->|Wireless Signal Wave| B
    F["Video Player"] -->|Wireless Signal Wave| B
    G["Monitor"] -->|Wireless Signal Wave| B
    H["Display"] -->|Wireless Signal Wave| B
    I["Water Splitter"] -->|Wireless Signal Wave| B
    J["Radio Generator"] -->|Wireless Signal Wave| B
    K["Audio Generator"] -->|Wireless Signal Wave| B
    L["Video Generator"] -->|Wireless Signal Wave| B

1 Turn on the MusicCast compatible device.

2 Tap the MusicCast CONTROLLER app icon on your mobile device and tap "Setup."

Tip

If you have already connected a MusicCast compatible device to the network, tap "Settings" and then "Add New Device."

3 Operate the MusicCast CONTROLLER app following the onscreen instructions, then press and hold the CONNECT button of the MusicCast compatible device (or the remote control) for three seconds.

Refer to the Owner's Manual of each MusicCast compatible device for the CONNECT button.

4 Set up the network

Operate the MusicCast CONTROLLER app following the onscreen instructions to set up the network.

5 Operate the MusicCast CONTROLLER app to playback.

Tip

- If you want to install a MusicCast compatible device to a location that is out of range of the wireless router, connect another MusicCast support device to the router with a network cable to extend the range (Extend mode).

graph TD
    A["Standard Mode"] --> B["Radio Station"]
    C["Extend Mode"] --> D["Radio Station"]
    B --> E["Speaker"]
    D --> F["Speaker"]
    style A fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style D fill:#ccf,stroke:#333
    style E fill:#dfd,stroke:#333
    style F fill:#dfd,stroke:#333

- Depending on where it is placed, the MusicCast compatible device may not be able to play back a high-resolution audio source. In this case, connect the device directly to the router with a network cable.

Troubleshooting

Refer also to the troubleshooting section in the relevant Owner's Manual for the MusicCast compatible device.

Problem/Cause Remedy
No sound from the MusicCast compatible device.
The device is turned off.	Turn on the device.
	Enable network standby on the device.
The device is not connected to the MusicCast network.	Connect the device with the MusicCast CONTROLLER app.
Cannot make the connection settings on the MusicCast app.
The mobile device is not connected to the wireless router at your home.	Connect the mobile device to the wireless router and start the MusicCast CONTROLLER app.
	Disable the cellular data transmission.
The MusicCast compatible device is turned off.	Turn on the MusicCast compatible device.
	Enable network standby on the device.
Cannot connect to the network.
The network parameters (IP address) have not been obtained properly.	Enable the DHCP server function on your router.
The setting of the wireless router has been changed.	Connect all MusicCast compatible devices to the network with the MusicCast CONTROLLER app.
The MusicCast CONTROLLER app cannot detect a MusicCast compatible device.
The mobile device is not connected to the wireless router at your home.	Connect the mobile device to the wireless router, and set the MusicCast compatible device with the MusicCast CONTROLLER app again.
The MusicCast compatible device is turned off.	Turn on the device.
	Enable network standby on the device.

For further information, please visit our website:

http://www.yamaha.com/musiccast/

MusicCast is a trademark or registered trademark of Yamaha Corporation.

Android and Google Play are trademarks of Google Inc.

iPhone, iPad and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.

Diagram of a central device connected to eight peripheral devices (no text or symbols)

musicCast

Appareil mobile (smartphone, etc.)

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

musicCast

Hauptmerkmale

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

MusicCast

Funktioner

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

musicCast

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

musicCast

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

musicCast

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

musicCast

Главные функции

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

MusicCast

主要功能

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

MusicCast

주요 기능

http://www.yamaha.com/musiccast/

Diagram of a central device connected to eight peripheral devices (no text or symbols)

MusicCast

主な機能

http://www.yamaha.com/musiccast/