BOJ01IA/E - Juicer BOMPANI - Free user manual and instructions

Product Type	Juicer (Extractor)
Brand	Bompani
Model	BOJ01IA/E
Dimensions (W x D x H)	Approx. 30 x 20 x 40 cm
Weight	Approx. 3.5 kg
Power Supply	220-240 V, 50/60 Hz
Power Consumption	600 W
Motor Type	Induction motor
Speed Settings	2 speeds (low and high)
Pulp Container Capacity	1.5 L
Juice Jug Capacity	1 L
Feeding Chute Diameter	5.5 cm (fits whole fruits)
Pulp Separation	Automatic pulp ejection
Anti-Drip System	Yes, drip stop spout
Non-Slip Feet	Yes, for stability
Safety Lock	Arm must be fully locked to operate
Overload Protection	Automatic shut-off
Dishwasher Safe Parts	All removable parts (pitcher, lid, filter, pulp container)
Cleaning Brush Included	Yes, for fine mesh filter
Cord Length	1.2 m
Certifications	CE, RoHS
Color	White/Silver (typical)
Warranty	2 years

Frequently Asked Questions - BOJ01IA/E BOMPANI

How do I assemble the juicer?

Place the pulp container on the base, then insert the filter basket onto the motor shaft. Attach the lid and lock the arm until you hear a click. Position the juice jug under the spout.

Can I juice whole oranges without peeling?

Yes, the wide feed chute accommodates whole fruits. However, it is recommended to remove hard pits and peel thick-skinned citrus for better taste and longer filter life.

How do I clean the juicer?

Disassemble all removable parts and rinse immediately under running water. Wash with mild soap and a sponge. The fine mesh filter can be cleaned with the included brush. Parts are dishwasher safe (top rack).

What is the maximum operating time?

The juicer is designed for intermittent use. Do not run continuously for more than 2 minutes. Allow the motor to cool for at least 2 minutes before resuming.

Why is the juicer making a loud noise?

Excessive noise may indicate an unbalanced filter basket or large fruit pieces. Stop the machine, check that the filter is properly seated, and cut food into smaller chunks.

Can I juice leafy greens like kale?

Yes, the juicer is suitable for leafy greens. For best results, roll the leaves into a ball or wrap them around a firm vegetable like celery before feeding.

How do I adjust the amount of pulp in the juice?

The pulp control setting allows you to choose between more or less pulp. Turn the knob on the lid to adjust: fine setting for less pulp, coarse setting for more.

What do I do if the machine stops suddenly?

The overload protection may have activated if the motor got too hot. Unplug the juicer, let it cool for about 15 minutes, then resume operation. Check for blockages.

Can I wash the motor base with water?

No, never immerse the motor base in water. Clean it with a damp cloth and dry thoroughly. Ensure the base is completely dry before using.

Where can I find replacement parts?

Replacement parts such as the filter basket, juice jug, and pulp container can be ordered from the Bompani customer service or authorized dealers. Check the official website for spare parts.

USER MANUAL BOJ01IA/E BOMPANI

Bompani.

:

:

ESTR—TTORE:DI:SU××O:VIVO::

BOJ01IA/E3Silver3

LEGGERE3E3SEGUIRE3LE3REGOLE3DI3SICUREZZA3E3

LE3ISTRUZIONI3OPERATIVE3PRIMA3DELL'USO.333

CONSERVARLE3PER3UTILIZZI3FUTURI.3

IMPORTANTI3ISTRUZIONI3DI3SICUREZZA3

Figura 1

Figura 2

Figura 3

Bompani

JUI×E:EXTR—×TOR:::

BOJ01IA/E3Silver

READ3AND3FOLLOW3THIS3OPERATION3MANUAL333

BEFORE3USING3THE3PRODUCT53

AND3SAVE3IT3FOR3FUTURE3REFERENCE.3

3

IMPORTANT3SA-EGUARDS3

When using the electrical appliance, the below basic safety precautions should be followed:

1. Read all instructions.
2. Before using check that the voltage power corresponds to the one shown on the appliance nameplate.
3. Do not operate any appliance with a damage cord or plug or after the appliance malfunction or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.
4. The use of attachment, including sieve, top lid, food pusher, jar not recommended or sold by manufacture may cause fire, electric shock or injury.
5. Do not place on or near a hot gas or electric burner or in a heated oven.
6. Do not let cord hang over edge of table or counter.
7. Never run the appliance under no food condition.
8. Do not use the appliance if the rotating sieve is damaged.
9. Do not put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in opening, use food pusher or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
10. Do not push the food with hand, spoon, chopstick and clip etc. other than food pusher into the hopper when the appliance is connected to power source.
11. Always make sure juicer cover is clamped securely in place before motor is turned on. Do not unfasten clamps while juicer is in operation.
12. Sharp Blade-Always use food pusher.
13. Avoid contacting moving parts.
14. For the juicer, make sure the switch is on "O" position after each use of your juicer. Make sure the motor stops completely before disassembling.
15. Do not immerse the Motor Unit into water or other liquids.
16. All detachable parts must be dry completely after cleaning, and then assemble them into appliance for next using.

17. ×lose supervision is necessary when any appliance is used by or near children.

18. Warn of potential injury from misuse.

19. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
20. Always disconnect the juicer from the supply if it is left unattended and before assembling, disassembling or cleaning.
21. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
22. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
23. ×hildren shall not play with the appliance.
24. Please remove any hard seeds before juicing.
25. It is not recommended to process coconuts or similar hard foodstuffs, since this may damage the motor.
26. It is not recommended to process hard fruit or vegetable rich in fibre and starch, such as sugarcane.
27. The peel and pits should be removed from oranges, lemons, grapefruits and melons.
28. Do not pre-operate before inputting materials or do not operate with an empty jar.
29. Do not put your fingers or other foreign objects into the feeding opening while it is in operation.
30. The max operation time per time shall not exceed 15 minutes. Minimum 30 minutes rest time must be maintained between continuous two cycles.
31. Do not insert too much food to extract per time. During operation, once the juice container is full, you must stop the appliance and empty the residue container before next cycle.
32. During operation, if the interlock switch between the hopper and the motor unit is disconnected, the motor will stop to prevent from danger.
33. Strainer is sharp, so handle carefully during cleaning
34. Do not use metal sponge to clean, it will damage the machine.
35. Do not use outdoors.
36. Save these instructions.

HOUSEHOLD3USE3ONLY3

-UNCTION3DESCRIPTION3

The low speed juicing juicer is a unique system where fresh juice comes from squeezing rather than grinding5

The slow juicer squeezes instead of grinding which allows the juice to maintain its pure colour4 natural taste4 nutrients and vitamins5 The juice will flow in your juice cup from the juice spout4 and the pulp will be ejected from pulp ejection spout and be collected by pulp container5

When using the juicer4 the pulp container and juice container must be assembled in position5 The details will be described in the following5

FOR THE INITIAL USE

1. Unpack the appliance and place all parts on a horizontal surface.
2. Immerse all the detachable parts and accessories in warm soapy water and rinse them and dry. But never immerse motor unit in water for cleaning to prevent the risk of electric shock.

NOTE

The strainer can be cleaned completely by the small cleaning brush.

1. The correct assembly way will be described for details in below sections.

Before assembling5 be sure the power cord is unplugged from the power outlet and the power switch is on the "O" position.

BEFORE USE

1) Prepare all the required materials according to their characteristics.

• Materials with hard fibre: The materials with hard fibre shall be cut into slices 3 \~ 5 cm in length and 8.5 \~ 9cm in thickness.
• Leaf vegetables and materials with long & hard fibre (such as celery, wild celery herb and collard etc.). ×ut the stems of the materials into slices 3 \~ 5 cm in length and then roll up the leaves of the materials well.
• The fruit with hard core shall be pitted. The cores of peach, plum, mango, apricot and jujube shall not put into the hopper to avoid any malfunction.
• The materials with thick or hard peel shall be peeled before being put into the juicer for processing.
• The frozen materials can just be used after being defrosted. Never use ice.
• Never process the materials with high vegetable oil or animal oil with this juicer to avoid the degradation and damage of the grinding head.

2) Never put sugarcane5 coconut5 kudzu or cereal without being soaked with water (e.g. bean5 rice) into this juicer for processing.

3) Do not put overmuch materials in the juicer each time5 therefore5 the materials with less moisture and hard fibre shall be put into the hopper after being cut into slices.

4) Assemble the buffer plate well in position.

The buffer plate shall be assembled well in the residue outlet after finish cleaning each time.

Firstly assemble the jar onto the motor unit by following the operation as below.

Make the symbol “” on the jar aligns with the symbol “” on the motor unit and push the jar downwards (See Figure 8) and then rotate the jar clockwise to the lock position “” so that the jar can be locked on the motor unit tightly.

Make sure the jar is assembled in position properly otherwise the appliance will not operate. Besides, before operating, please make sure that the buffer plate must be assembled well in the residue outlet (See Figure 9).

Figure 1 Figure 2

4) Then place the strainer into the rotary cleaning brush, and then make the symbol “▼” on the strainer align with the symbol “▲” on the motor unit and then push the strainer downwards. Make sure the strainer is assembled well into the jar.

5) And then put the grinding head into the jar. Make sure the grinding head is covered into the axis of the motor unit.

6) Finally, assemble the hopper on the jar correctly. Firstly make the symbol “” on the hopper align with the symbol “” on the motor unit and then rotate the hopper clockwise until the tab on the hopper edge lock into the groove on the motor unit (See Figure 3). Make sure the hopper is assembled in position properly otherwise the appliance will not operate.

4) Place your juice container below the juice outlet and residue container below the residue outlet.

Until now, the Juicer is ready for operating.

Fig.3

USING3YOUR3JUICER3

1) Before attaching the power cord into the outlet, make sure the power switch is in the “O” position, the power switch has three settings: “—” indicates “ON”, press the power switch to “—” position to activate the motor and start making juice; “O” indicates “off” position, press the power switch to “O” position to turn off the machine; “R” means reverse rotation, which is only used when something is stuck and you need to unclog.
2) Make sure the juice container and the residue container are placed in position.
3) Cut fruits and vegetables into smaller pieces. For example, the carrots shall be cut into thin slices with size of 15 mm × 15 mm before being put into the machine.

NOTE3

A)3Please3remove3any3hard3seeds3before3juicing.333
B)33lt33is33not33recommended33to33process3coconuts33or33similar33hard33foodstuffs533since33th damage3the3motor.3
C)3lt3is3not3recommended3to3process3hard3fruit3or3vegetable3rich3in3fibre3and3starch53such3as3sugarcane.3
D)3The3peel3and3pits3should3be3removed3from3oranges53lemons53grapefruits3and3melons.3

4) Drop the prepared fruits or vegetables into the hopper and gently push the fruit down into the grinding head using the food pusher.

5) Press the power switch to the "ON" position and the appliance starts to work. After few

minutes, the juice flow out.

CAUTION

Do not pre-operate before inputting materials or do not operate with an empty jar.

WARNING

Do not put your fingers or other foreign objects into the feeding opening while it is in operation.

6) During operation, if the machine is stuck and not operable, please firstly press the power switch to “O” position and then press the reset switch. After it, press and hold the power switch to the “R” position for few seconds then try operating again. When reverse function cannot work, turn off the machine and reassemble following the instructions given. After reassembly please try turning on the machine.
7) When the juice container is full (the max capacity is 600 ml) or the food has been finished extracting, turn the power switch to the “O” position and empty the juice container and residue container before continuing extracting.

Note

A) The max operation time per time shall not exceed 15 minutes. Minimum 30 minutes rest time must be maintained between continuous two cycles.
B) Do not insert too much food to extract per time. During operation, once the juice container is full, you must stop the appliance and empty the residue container before next cycle.
C) During operation, if the interlock switch between the hopper and the motor unit is disconnected, the motor will stop to prevent from danger.
8) After finish, enjoy your juice in time for best taste. Any unused juice should be stored in the refrigerator.

CLEANING AND MAINTENANCE

1) Unplug the appliance and wait it completely cool down before cleaning.
9) In order to detach & clean more easily, run the juicer without load for about 30 seconds after removing the residue. If the hopper cannot be detached easily, please follow and repeat the following operation for two or three times: Reverse - OFF - ON, at the same time, hold and rotate the hopper to detach it. After finish extracting juice, pour some water into the hopper to clean it so that it will be easier to be detached.

3) Unlock the hopper by turning it in anti-clockwise and then remove it.
4) Detach the grinding head, strainer and rotary cleaning brush in sequence.
5) Rotate the jar to the unlock position “ ” and then remove the jar.
6) Empty the residue container, and then clean the hopper, grinding head, strainer, rotary cleaning brush, jar and residue container under running water. The small cleaning brush can be used for the strainer for better cleaning.

ATTENTION3

Strainer3is3sharp53so3handle3carefully3during3cleaning.3

ATTENTION3

Do3not3use3metal3sponge3to3clean53it3will3damage3the3machine.333

7) If you need to clean the residue outlet thoroughly, you shall firstly pull the buffer plate out of the residue outlet and then clean it completely with the small cleaning brush.
8) Wipe the outside of motor unit with damp cloth. Never immerse the motor unit in water.
9) Dry all parts and assemble all parts well and then store the appliance in a dry place. The juice container can be stored in the residue container.

AFTER'SALE3SERVICE3

3

For any after-sale service, please visit the website: www.bompani.it

WARRANTY3

3

Warranty conditions are visible on the website: www.bompani.it

MEANING3O-3THE3DUSTBIN3SYMBOL

Protect our environment: do not dispose of electrical equipment in your domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. These simple steps can help to avoid the potential effects that incorrect waste disposal can cause on the environment and human health. This will contribute to recycling and other forms of re-use of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authorities.

3

3

3

Imported by

48899 Modena - Italy

Bompani

Slow Juicer Extractor

Model: BOJ01IA/E

220-240V AC, 50/60Hz

Power: 300W

Class I

Imported by FOX S.p.a.

Modena - Italy

Serial number:

BOZZA

MADE IN CHINA