SKS-4515 - Kitchen scale SINBO - Free user manual and instructions

Product type	Digital kitchen scale
Brand	Sinbo
Model	SKS-4515
Maximum capacity	5 kg
Precision (graduation)	1 g
Measurement units	g, oz, lb:oz
Display	LCD screen
Main functions	Tare, unit conversion, auto-off, low battery indicator
Power supply	2 AAA batteries (not included)
Dimensions (L x W x H)	20 x 20 x 3 cm
Weight	300 g
Main material	ABS plastic, tempered glass platform
Care and cleaning	Clean with a damp cloth, do not immerse in water
Safety	Do not exceed maximum capacity, avoid shocks and moisture
Spare parts	Batteries (standard AAA)
Repairability	Contact Sinbo after-sales service
Warranty	2 years

Frequently Asked Questions - SKS-4515 SINBO

How to change the batteries of the Sinbo SKS-4515 scale?

Turn the scale over, open the battery compartment on the bottom, remove the old batteries and insert two new AAA batteries respecting polarity (+/-). Close the cover.

How to use the tare function?

Place an empty container on the scale, then press the TARE or ZERO button to reset the display to zero. Then add the ingredients to the container; the net weight will be displayed.

How to change the measurement unit?

Press the UNIT or MODE button to switch between available units: grams (g), ounces (oz) and pounds-ounces (lb:oz). The selected unit is displayed on the screen.

How to clean the scale?

Clean the platform and housing with a slightly damp soft cloth. Do not use abrasive products or solvents. Never immerse the scale in water.

What is the maximum weight the scale can measure?

The maximum capacity of the Sinbo SKS-4515 scale is 5 kg (5000 g). Do not exceed this limit to avoid damaging the device.

What to do if the scale does not turn on?

First check that the batteries are correctly installed and not discharged. Replace them if necessary. Also ensure the surface is flat and stable; the scale may not turn on if not placed properly.

Is the scale accurate?

Yes, the scale offers a precision of 1 g for reliable weighing. For best results, use it on a hard, flat surface away from drafts.

How does the auto-off function work?

The scale turns off automatically after about 60 seconds of inactivity to save batteries. To turn it back on, press the ON/OFF button or place an object on the platform if the 'auto-on' feature is available.

On what surface to use the scale?

Place the scale on a flat, hard, and stable surface (e.g., a tiled or wooden countertop). Avoid soft or uneven surfaces that could affect measurements.

Is the scale under warranty?

Yes, the Sinbo SKS-4515 scale is guaranteed 2 years against manufacturing defects. Keep your proof of purchase and contact Sinbo after-sales service in case of problems.

USER MANUAL SKS-4515 SINBO

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

This appliance is intended to be used in household and similar applications such as:

• staff kitchen areas in shops, offices and other working environments;
• farm houses;
• by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments.

TARTILAR HAKKINDA BİLGİ

Before the kitchen scale is taken into use for the first time, please read this instruction manual thoroughly and keep it for future use.

About scales

There are several types of scales:

The traditional mechanical scale that estimates the weight on the basis of spring action – subsequently the weight can be read from a dial. The digital scale which is in fact also a mechanical scale with the exception that weight measurements are read from a display. The modern electronic scale which performs weighing by means of an electronic sensor and converts the weight electronically for display reading. The advantage of the electronic scale over the mechanical or digital scales is first and foremost that it performs far more accurate weight measurements – and will continue to do so. The mechanical and digital scales become increasingly inaccurate over time, partly due to worn springs in these types of scales.

Please note that electronic scales are sensitive to major temperature swings. Inaccuracies may occur if the scale is cold. The scale consequently works best at normal room temperature.

Replacement and insertion of batteries

The scale requires 2 type AAA batteries which must be inserted before the scale is taken into use.

Please allow the scale to adapt to normal room temperature before use.

To insert batteries remove the small door on the back of scale. The batteries can now be inserted or replaced by placing them in the battery compartment so that the batteries are firmly fixed – make sure that the batteries are inserted the right way. The door is then re-attached. When battery replacement is required, "Lo" will appear on the display.

Mounting the scale on a wall

The scale is designed for wall mounting or mounting on any firm, vertical surface. The

MOUNTING THE SCALE ON A WALL

scale is equipped with one wall mount bracket at the top and another at the bottom on the back of the scale. Remember to insert the batteries before the scale is mounted on a wall. Use the enclosed template for drilling holes in the wall or other surface to ensure that the holes are drilled correctly in relation to each other. Make sure that the scale is mounted on both screws, and that the screws are sufficiently well mounted. Otherwise the weight might fall down during use due to load and gravity.

Setting the clock

The scale is equipped with a 24-hour clock which can be read from the display when the scale is not in use as a weighing instrument. Consequently, the time should be set before the scale is taken into use.

The time is set by pressing and holding the MODE button for a few seconds. Subsequently, the hour digits start flashing. Set the hours using the TARE button – when the required hour digits appear on the display, confirm by pressing MODE. The minute digits then start flashing. Set the minutes using the TARE button again and confirm by pressing MODE when the required minute digits appear. The digits will change more rapidly if the TARE button is held.

Weighing

Fold the weighing lever downwards and press the ON/OFF button lightly to activate the scale. After a few seconds the scale display reads "0". Then select measurement unit by pressing MODE (it is also possible to shift between measurement units during weighing by pressing MODE). The scale is now ready for use. The scale can weigh up to a maximum of 3 kg.

Resetting

This kitchen scale is equipped with a practical reset function which enable all ingredients to be weighed directly in the same bowl, one at a time. When you have finished weighing the first ingredient, the scale is reset by a quick tap on the TARE button. When the scale reads "0" again, it is reset and ready for weighing the next ingredient. Remember to reset after weighing each ingredient.

If the most recently weighed ingredient is removed again after resetting, its weight will be displayed with a negative sign. The scale is reset again by pressing TARE. If the scale is overloaded (a load of more than 3 kg), the display will read "err". Remove the surplus ingredients from the scale and press TARE for resetting. The scale will then be ready for weighing again.

Switch-off

To save battery life the scale automatically switches off following approximately 60 seconds of non-use.

The scale can also be switched off manually by pressing the ON/OFF button.

CLEANING AND MAINTENANCE

The surface can be wiped clean using a soft cloth moistened with water and a mild detergent. Wipe dry using a dry cloth or paper towel. Never use strong, abrasive cleaners as these may scratch the surface. The scale may not be immersed in water or other liquids. Do not place the scale near strong heat sources such as cookers or radiators.

Only use new, appropriately sized batteries. Always remove exhausted batteries as these may leak chemicals which cause damage to the scale's electronic circuits. The scale is designed for private household use only, and any losses caused by measurement or reading errors will not be compensated.

If the scale is used for any other purpose than the intended, or if it is not used in accordance with the instruction manual, the user is completely responsible for any consequences. Any resulting damage or other to the product is not covered by warranty.

Protecting the environment and disposing of batteries

Respect the environment when you replace batteries. Exhausted batteries are not ordinary household waste. They should be disposed of at authorized collection points. Make sure that the batteries are not too old or worn out as there is a risk that they might leak acid. Check the expiry date on the batteries.

Remember to remove the batteries before disposing of the product.

Disposing of the appliance

Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with the symbol indicating separate collection of such equipment must be returned to a

municipal waste collection point.

Warranty

Claim according to valid law. Machine stamped receipt shall be enclosed if one wishes to make a complaint. The appliance shall be returned to the store where it was purchased.

Technical data

- Sinbo SKS 4515

• Minimum weight 5 g, maximum weight 3 kg with 1 g interval
- The appliance must be disposed of as electronic waste
- Reset function
- LCD digital display
• Automatic switch-off after approx. 60 seconds of non-use
• 2 type AAA batteries (included)
• Scale accuracy: +/- 1.0 %
- Clock accuracy: +/- 1 minute per day

PARTS DESCRIPTION

1. On/Off Button
2. Tare Button
3. Mode Button
4. LCD Display
5. Platform

FRANÇAIS

SINBO SKS 4515 BALANCE DE CUISINE MODE D'EMPLOI

atmospheric seeing above the shaisha. We feel bad due to its successful situation, that only should be a bit of the meaning of the situation.

Unit B, 10/F Lee May Building 788-790 Nathan Road, Mongkok, Kowloon, HK.

- UYGUNLUK BEYANI / CE - TÜV SÜD Product Service GmbH