Series 9000 HC9490 - Beard trimmer PHILIPS - Free user manual and instructions

Product Type	Beard Trimmer
Model	Series 9000 HC9490
Brand	Philips
Dimensions (L x W x H)	Approx. 17 cm x 4 cm x 5 cm
Weight	Approx. 250 g
Power Source	Rechargeable Lithium-ion battery
Charging Time	1 hour for full charge
Run Time	Up to 120 minutes cordless use
Blade Material	Self-sharpening steel blades
Length Settings	Precision dial with 0.2mm steps, adjustable from 0.2mm to 10mm
Attachments	Adjustable comb (1-10mm), precision comb, detail trimmer
Water Resistance	IPX7 rated, fully washable
Display	LED battery indicator
Maintenance	Rinse under running water; oil blades monthly
Safety Features	Skin-friendly rounded blade tips, non-slip grip
Spare Parts	Replacement blades and combs available
Warranty	2-year global warranty
In the Box	Trimmer, adjustable comb, precision comb, detail trimmer, charging stand, cleaning brush, travel pouch
Country of Origin	China

Frequently Asked Questions - Series 9000 HC9490 PHILIPS

How do I adjust the cutting length on my Philips Series 9000 HC9490?

Turn the adjustable comb to your desired length, from 1mm to 10mm in 0.2mm steps. The precision dial allows fine-tuning for a personalized trim.

Can I use the HC9490 in the shower?

Yes, the IPX7 water resistance rating means it is fully washable and safe for use in the shower. Rinse under running water after use.

How long does the battery last on a full charge?

The Lithium-ion battery provides up to 120 minutes of cordless use after a 1-hour charge. A quick 5-minute charge gives enough power for one trim.

How do I clean the trimmer?

Remove the comb and rinse the entire trimmer under warm running water. Use the supplied cleaning brush to remove any hair between the blades. Allow to dry completely.

Are the blades self-sharpening?

Yes, the self-sharpening steel blades maintain their sharpness over time, ensuring consistent performance without the need for manual sharpening.

What attachments are included with the HC9490?

The kit includes an adjustable comb (1-10mm), a precision comb for detailed work, and a detail trimmer for edging and shaping.

Can I replace the blades?

Yes, replacement blades are available for purchase. The blade unit can be detached and replaced easily to extend the life of your trimmer.

How do I know when the battery is low?

The LED battery indicator shows a steady light when charging and flashes when the battery is low. The trimmer also has a travel lock to prevent accidental use.

Is the HC9490 suitable for body grooming?

While designed primarily for beard and facial hair, the trimmer with an adjustable comb can be used on body hair. Use a longer comb setting for sensitive areas.

What is the warranty period?

The Philips Series 9000 HC9490 comes with a 2-year global warranty. Keep your proof of purchase for any claims.

USER MANUAL Series 9000 HC9490 PHILIPS

Always here to help you

Register your product and get support at

www.philips.com/welcome

HC9490

PHILIPS

ENGLISH 4

DANSK 14

DEUTSCH 24

GREEK 34

SPANISH 44

FINNISH 54

FRENCH 64

ITALIAN 74

DUTCH 84

NORWEGIAN 94

PORTUGUESE 104

BRAZILIAN PORTUGUESE 114

SWEDISH 124

TURKISH 134

Introduction

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

General description (Fig. 1)

1 Cutting unit 2 Flywheel 3 On/off button 4 M-symbol 5 Length setting lock 6 Charging light 7 Length settings 8 Display 9 Trimming comb 1-7 mm 10 Trimming comb 7-24 mm 11 Trimming comb 24-42 mm 12 Adapter 13 Small plug 14 Charging stand 15 Cleaning brush 16 Pouch

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

- Keep the appliance, the adapter and the charging stand dry.

Warning

• The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Caution

• This appliance is not washable. Never immerse the appliance or charging stand in water, nor rinse it under the tap.
• Always check the appliance before you use it. Do not use the appliance, adapter, charging stand or any other part if it is damaged, as this may cause injury. Always replace a damaged adapter, charging stand or part with one of the original type.
• Always replace a damaged adapter or part with one of the original type.
• Only use this appliance for its intended purpose as shown in the user manual.
• Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields (EMF).

General

• The appliance is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts.
• The adapter transforms 100-240 volts to a safe low voltage of less than 24 volts.

Charging

Charge the appliance fully before you use it for the first time or after a long period of disuse.

When it is charged for 1 hour, the appliance has a cordless operating time of up to 180 minutes.

Note: After charging the appliance fully for the first time, you can also use the appliance directly from the mains. Simply connect the appliance to the mains.

Charging indications

Battery low indication

- When the battery is almost empty, the charging light starts to flash orange.

Charging

- When the appliance is charging, the charging light flashes blue.

Battery fully charged

- When the battery is fully charged, the charging light lights up blue continuously.

Note: After 30 minutes, the charging light goes out.

Charging in the charging stand

1 Put the small plug in the charging stand. 2 Put the adapter in the wall socket.

3 Place the appliance in the charging stand. 4 After charging, remove the adapter from the wall socket and pull the appliance plug out of the charging stand.

Charging with the adapter

1 Make sure the appliance is switched off. 2 Insert the small plug into the appliance. 3 Put the adapter in the wall socket. 4 After charging, remove the adapter from the wall socket and pull the small plug out of the appliance.

Optimising the lifetime of the rechargeable battery

When you have charged the appliance for the first time, we advise you to use it until the battery is completely empty. Continue to use the appliance until the motor almost stops operating during a session. Then recharge the battery. Follow this procedure at least twice a year.

Using the appliance

The hair length settings are indicated in millimeters. The settings correspond to the remaining hair length after trimming.

Be careful when you trim for the first time. Do not move the trimmer too fast. Make smooth and gentle movements.

Tip: Start trimming at a high length setting and reduce the length setting gradually until you have reached the desired hair length.

Trimming with comb

There are 3 different combs.

-1-7mm -7-24mm - 24-42mm

1 Attach one of the combs to the appliance.

2 Scroll upwards or downwards to select the desired length setting. Note: When you trim for the first time, start at the highest length setting to familiarise yourself with the appliance.

3 Switch on the appliance.

4 To trim most effectively, move the trimmer against the hair growth direction. Make sure the surface of the comb always stays in contact with the skin.

Trimming without comb

Use the trimmer without the trimming comb to trim hair close to the skin (0.5mm) or to contour the neckline and sideburns.

Be careful when you trim without comb because the cutting element removes every hair it touches.

1 Push the comb off the appliance.

2 Switch on the appliance.

3 Touch the hair lightly with the trimmer. Make well-controlled movements.

Features

Memory settings

The appliance has a memory which allows you to save three frequently used length settings for each comb. Each comb has different length ranges.

Saving a setting

1 Scroll upwards or downwards to select the desired length setting.

2 To enter the memory, press the on/off button for 2 seconds. ▶ Number 1 starts to flash.

Note: If you want to save a setting as number 2 or 3 of the memory, scroll upwards or downwards to select number 2 or 3.

3 To save a length setting as number 1, 2 or 3 of the memory settings, press the on/off button for 2 seconds. The display shows the word 'SEt' when the length setting is correctly saved. Memory setting number 1, 2 or 3 lights up continuously.

Selecting a memory setting

1 To enter the memory, press the on/off button for 2 seconds. ▶ Number 1 starts to flash.

Note: To select number 2 or 3 in the memory, scroll upwards or downwards until number 2 or 3 flashes on the display.

2 Press the on/off button to confirm the selected memory setting. The number of the selected setting lights up continuously.

Length setting lock

This feature prevents accidental changing of the length setting during trimming. Every time you switch on the appliance, the length setting lock is activated. You can only change the length setting if you switch off the appliance.

1 Scroll upwards and downwards to select the desired length setting.

2 Switch on the appliance. The lock symbol starts to flash. You cannot change the length setting anymore.

Note: If you want to select a different length setting, switch off the appliance. Scroll upwards or downwards to select the desired length setting and switch on the appliance again.

Cleaning

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol, petrol or acetone to clean the appliance.

Never immerse the appliance or the charging stand in water or rinse it under the tap.

1 Make sure the appliance is switched off and disconnected from the mains. 2 Wipe the housing of the appliance with a dry cloth.

3 Remove the comb and clean it with the cleaning brush.

4 Press the release button (1). The cutting unit comes off the appliance (2).

5 Clean the cutting unit with the cleaning brush.

6 Clean the inside of the appliance with the cleaning brush.

7 To reattach the cutting unit, insert the lug of the cutting unit into the guiding slot.

8 Insert the lug of the cutting unit into the guiding slot (1) and push the cutting unit back onto the appliance (2). 9 Wipe the charging stand with a dry cloth.

Note: If the message 'CL' is shown on the display, too much hair has collected between the comb and the cutting unit. Remove the comb and cutting unit and clean them with the cleaning brush supplied. Also clean the top edge of the handle with the cleaning brush supplied.

Replacement

Only replace a worn or damaged cutting unit with an original Philips cutting unit, available from authorised Philips service centre.

1 Press the release button (1). The cutting unit comes off the appliance (2).

2 Insert the lug of the new cutting unit into the guiding slot (1) and push the cutting unit onto the appliance (2).

Ordering accessories

To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details).

Recycling

- This symbol on a product means that the product is covered by European Directive 2012/19/EU.

• This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2006/66/EC which cannot be disposed of with normal household waste. Follow the instructions in section 'Removing the rechargeable battery' to remove the battery.
• Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

Removing the rechargeable battery

Note: We strongly advise you to have a professional remove the rechargeable battery.

Only remove the rechargeable battery if it is completely empty.

1 Disconnect the appliance from the mains and let the appliance operate until the motor stops.

2 Press the release button (1) and remove the cutting unit (2).

3 Insert the screwdriver between the motor unit and the back panel of the appliance. Press down the screwdriver as far as it will go.

4 Tilt the handle of the screwdriver downwards (1) and separate the back panel from the appliance (2).

5 Remove the side panels. Pull the bottom part of the printed circuit board with the rechargeable battery attached from the appliance.

6 Cut the wires to separate the rechargeable battery from the appliance.

Do not connect the appliance to the mains again after you have opened it.

Guarantee and support
	If you need information or support, please visit www.philips.com/support or read the separate worldwide guarantee leaflet.
	Guarantee restrictions
	Cutting units are not covered by the terms of the international guarantee because they are subject to wear.

Introduction

Caution

Low battery indicator

• 1-7 mm -7-24mm
• 24-42 mm

Caution

Caution

Warning

-1-7 mm -7-24mm -24-42mm

2 Start the device.

Attention

• 1-7 mm -7-24mm
• 24-42 mm

Attention

• 1-7 mm -7-24mm
• 24-42 mm

Attention

• 1-7 mm -7-24mm
• 24-42 mm

Caution

Battery fully charged

- When the battery is fully charged, the charge indicator lights up continuously blue.

1 Connect the small plug to the charging stand. 2 Plug the adapter into the wall outlet.

• 1–7 mm -7-24mm
• 24-42 mm

1 Attach one of the combs to the appliance.

3 Switch on the appliance.

2 Switch on the appliance.

3 Touch the hair lightly with the trimmer. Use controlled movements.

Functions

Memory settings

Note: If you want to save a setting as memory number 2 or 3, scroll up or down to select number 2 or 3.

Selecting a memory setting

2 Insert the tab of the new cutting unit into the guide slot (1), and push the cutting unit onto the appliance (2).

Ordering accessories

Note: We strongly recommend that you have a qualified professional remove the rechargeable battery.

Warranty and support

3 Place the appliance on the charging base. 4 After charging, remove the transformer from the electrical outlet and disconnect the appliance plug from the charging base.

Charging with the adapter

• 1-7 mm -7-24mm
• 24-42 mm

2 Turn on the appliance.

2 Turn on the appliance.

5 Clean the cutting unit with the cleaning brush.

Ordering accessories

4 Tilt the screwdriver handle downwards (1) and separate the rear panel from the appliance (2).

Caution

1 Connect the small plug to the charging base. 2 Connect the adapter to the wall outlet.

2 Turn on the appliance.

2 Turn on the appliance.

5 Clean the cutting unit with the cleaning brush.

6 Clean the inside of the appliance with the cleaning brush. 7 To replace the cutting unit, insert the tip of the cutting unit into the openings.

Caution

Battery fully charged

• 1–7 mm -7–24 mm -24–42 mm

3 Turn on the device.

2 Turn on the device.

2 Turn on the device.

Caution

• 1-7 mm
• 7-24 mm
• 24-42 mm

3 Turn on the device.

2 Turn on the device.

Cleaning

Warranty and support