Daily Collection HR2006 - Blender PHILIPS - Free user manual and instructions

Product Type	Blender
Brand	Philips
Model	Daily Collection HR2006
Capacity	1.5 L
Power Consumption	350 W
Voltage	220-240 V
Frequency	50/60 Hz
Dimensions (L x W x H)	20 x 20 x 40 cm
Weight	1.5 kg
Main Functions	Blending, pureeing, mixing, crushing ice
Number of Speeds	2 (including pulse)
Jug Material	Plastic (BPA-free)
Blade Material	Stainless steel
Detachable Blade Unit	Yes
Dishwasher Safe Parts	Jug, lid, blade unit
Non-Slip Feet	Yes
Lid Lock	Yes
Cord Storage	Yes (cord wrap under base)
Spare Parts Available	Jar, blade unit, seal, lid
Reparability Score	6/10 (common parts replaceable)

Frequently Asked Questions - Daily Collection HR2006 PHILIPS

How do I clean the blender?

Detach the jar, lid, and blade unit. Wash them in warm soapy water or place them on the top rack of a dishwasher. Wipe the motor base with a damp cloth. Do not immerse the base in water.

Can I crush ice with this blender?

Yes, the Philips HR2006 can crush ice. Use the pulse function for best results. Do not overload the jar.

What is the maximum capacity for liquids?

The maximum liquid capacity is 1.5 L, but for hot liquids or foaming, do not fill above the 1 L mark to avoid spills.

Can I blend hot ingredients?

It is not recommended to blend hot liquids. Allow them to cool to room temperature first to prevent pressure buildup and damage to the jar.

Why is the blender not turning on?

Check that the jar is properly locked onto the base and the lid is securely closed. Also ensure the appliance is plugged into a working outlet. If it still doesn’t work, contact Philips support.

How do I use the pulse function?

Press the pulse button in short bursts for controlled blending. This is ideal for chopping or mixing without over-processing.

Are the jug and blade unit dishwasher safe?

Yes, the jug, lid, and blade unit are dishwasher safe. Place them on the top rack to avoid warping. The motor base should only be wiped clean.

What should I do if the blender leaks?

Check the sealing ring under the blade unit. If it is worn or damaged, replace it. Ensure the blade unit is tightened properly onto the jar.

Can I use the blender to grind coffee beans?

No, the blender is not designed for dry grinding coffee beans. Use a dedicated coffee grinder to avoid damaging the blades.

Where can I find spare parts?

Spare parts such as jar, blade unit, seal, and lid are available through Philips authorized service centers or online retailers. Use the model number HR2006.

USER MANUAL Daily Collection HR2006 PHILIPS

Exterior view of a Philips blender with handle and control buttons (no text or symbols on the device itself)

PHILIPS

Diagram of three open panels with grid patterns and curved arrows indicating rotation or movement (no text or symbols)

Line drawing of a mechanical component with a labeled point K (no text or symbols beyond the label)

ENGLISH 6

ESPAÑOL 13

简体中文 21

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Noise level: Lc = 86 dB(A)

General

Danger

- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Use only a moist cloth to clean the motor unit.

Warning

• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
• If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
• Do not use the appliance if the plug, the mains cord or other parts are damaged.
• Never use the blender jar or mill beaker (specific types only) to switch the appliance on and off.
• Never let the appliance run unattended.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not touch the blades, especially when the appliance is plugged in. The blades are very sharp.
• If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades.
• Never place the blade unit onto the motor unit if the blender jar or mill beaker (specific types only) is not or not properly attached to it.

Caution

• Always unplug the appliance before you assemble, disassemble or make adjustments to any of the parts.
• Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
• If you have not finished processing after the standard processing time, switch off the appliance and let it cool down for about 10 minutes before you process the next batch. If you need to process more than 5 batches, let the appliance cool down to room temperature for about 90 minutes after 5 batches before you let the appliance operate again. This helps prolong the life of the appliance.

Blender

Warning

• Never reach into the blender jar with your fingers or an object while the appliance is running.
• Make sure the blade unit is securely fastened to the blender jar before you assemble the blender jar onto the motor unit.
• Do not touch the cutting edges of the blade unit when you clean it. They are very sharp and you could easily cut your fingers on them.

Caution

• Never fill the blender jar with ingredients hotter than 80^irc C.
• To prevent spillage, do not put more than 1.25 litres of liquid in the blender jar, especially when you process at a high speed. Do not put more than 1 litre in the blender jar when you process hot liquids or ingredients that tend to foam.
• If food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use a spatula to remove the food from the wall.
• Always make sure the lid is properly closed and the measuring cup is inserted properly in the lid before you switch on the appliance.
• Never forget to place the sealing ring on the blade unit before you connect the blade unit to the blender jar, otherwise leakage occurs.
• Do not let the appliance run for more than 3 minutes at a time. Let it cool down to room temperature between processing cycles.

Mill beaker (HR2006 only)

Warning

- Never use the mill to grind very hard ingredients such as nutmeg, Chinese rock sugar and ice cubes.

Caution

• Never use the mill for more than 30 seconds without interruption. Let the mill cool down to room temperature between processing cycles.
• Never forget to place the sealing ring in the blade unit before you assemble the mill jar, otherwise leakage occurs.
• Always process cloves, star anise and aniseed together with other ingredients. If processed separately, these ingredients may attack the plastic materials of the appliance.
• The mill beaker may become discoloured when you use the mill to process ingredients such as cloves, anise and cinnamon.
• The mill is not suitable for chopping raw meat. Use the blender instead.
• Do not use the mill to process liquids such as fruit juice.

Filter

Caution

• Never use the filter to process ingredients hotter than 80^irc C.
• Never overload the filter. Do not put more than 70g dried soy beans or 150g fruit in the filter at the same time.
• Always make sure the lid is closed/assembled properly and the measuring cup is inserted properly in the lid before you switch on the appliance.
• Cut fruit into smaller pieces before you put it in the filter.
• Soak dried ingredients, such as soy beans, before you put them in the filter.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Built-in safety lock

This feature ensures that you can only switch on the appliance if you have properly assembled the blender jar or mill beaker on the motor unit. If the blender jar or mill beaker is correctly assembled, the built-in safety lock will be unlocked.

General description (Fig. 1)

A Motor unit
C Blender blade unit
D Sealing ring
E Plastic blender jar
F Level indication
G Hinged lid
H Opening in lid
Fruit filter
J Measuring cup
K Mill beaker (HR2006 only)

B Control knob with pulse setting and speed settings

Before first use

Thoroughly clean the parts that come into contact with food before you use the appliance for the first time (see chapter 'Cleaning').

Using the appliance

Blender

The blender is intended for fine pureeing, chopping and blending. With the blender you can prepare soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake batter etc.

Preparing the blender for use

1 Assemble the sealing ring on the blender blade unit (Fig. 2).
2 Insert the blade unit into the opening in the bottom of the blender jar (1). Screw the blade unit clockwise onto the bottom of the blender jar (2) until the blade unit it is fixed properly. (Fig. 3)
3 Put the blender jar with the blade unit attached on the motor unit and fix it by turning it clockwise ('click'). (Fig. 4)

The blender jar can be mounted in two positions: with the handle on the right side or on the left side.

4 Put the mains plug in the wall socket.

Using the blender

1 Put the ingredients in the blender jar.
2 Close the lid.
3 Insert the measuring cup into the opening in the lid. (Fig. 5)
4 Turn the control knob to speed 1 or 2.

Turn the control knob to the pulse setting if you want to process ingredients very briefly.

Do not let the appliance run for more than 3 minutes at a time.

Always let the appliance cool down to room temperature after each batch you process.

Tips

• If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 25x35x25mm) in the blender jar. Then turn the control knob to pulse position a few times.

• Cut meat or other solid ingredients into smaller pieces before putting them in the blender jar.

• Do not process a large quantity of solid ingredients at the same time. To get good results, we advise you to process these ingredients in a series of small batches.

• To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the lid onto the rotating blades.

Disassembling the blender

1 Remove the mains plug from the wall socket.
2 Remove the lid with the measuring cup from the blender jar.
3 Turn the blender jar with the blade unit attached anticlockwise to remove it from the motor unit.
4 Clean all removable parts immediately after use (see chapter 'Cleaning').

Filter

With the filter you can make delicious fresh fruit juices, cocktails or soy milk. The filter prevents pips and skins from ending up in your drink.

Never overload the filter. Do not put more than 70g soy beans (unsoaked weight) or 150g fruit in the filter at the same time.

Preparing the filter for use

1 Mount the blender jar with the blade unit attached on the motor unit and fix it by turning it clockwise ('click') (Fig. 4).
The blender jar can be mounted in two positions: with the handle on the right side or on the left side.
2 Put the filter in the blender jar (Fig. 6).
Make sure that the grooves of the filter fit exactly onto the ribs inside the blender jar.
3 Put the mains plug in the wall socket.

Using the filter

1 Close the lid.
2 Put the ingredients in the filter. (Fig. 7)

Do not exceed the MAX indication on the sieve mesh.

3 Pour water or another liquid (milk, juice, etc.) into the blender jar.
4 Insert the measuring cup into the hole in the lid.
5 Let the appliance run for approx. 40 seconds.
6 Switch off the appliance and remove the blender jar with the blade unit attached from the motor unit.

Do not open the lid. Leave the measuring cup and the filter in the jar.

7 Pour out the drink through the pouring lip of the blender jar. (Fig. 8)

Tip: For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run for a few more seconds.

Note: When you process a large quantity, we advise you not to put all the ingredients in the filter at the same time. Start to process a small quantity and let the appliance run for a few seconds. Then switch off the appliance and add another small quantity. Repeat this procedure until you have processed all the ingredients. Always keep the lid on the blender jar during processing.

8 Clean all removable parts immediately after use (see chapter 'Cleaning').

Mill (HR2006 only)

Using the mill

1 Put the ingredients in the mill beaker (Fig. 9).

You can process wet and dry ingredients.

Do not fill the mill beaker beyond the MAX indication.

2 Assemble the sealing ring on the blender blade unit. (Fig. 2)
3 Put the blender blade unit on the mill beaker (1) and screw the blade unit anticlockwise (2) until it is fixed properly. (Fig. 10)
4 Turn the assembled mill upside down and screw it clockwise onto the motor unit ('click') (Fig. 11).
5 Put the mains plug in the wall socket.
6 Switch on the appliance and let it run until the ingredients are fine enough.

This takes approx. 10-30 seconds.

Disassembling the mill

1 Unplug the appliance.
2 Screw the mill anticlockwise off the motor unit.
3 Turn the mill upside down and screw the blade unit clockwise off the mill beaker.
4 Clean all removable parts immediately after use (see chapter 'Cleaning').

Cleaning

Always unplug the appliance before you clean it.

Never immerse the motor unit in water, nor rinse it under the tap. Do not clean the motor unit in the dishwasher.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.

Tip: Cleaning the appliance and its parts is easiest immediately after use.

1 Make sure the appliance is unplugged.
2 Disassemble all removable parts.

Do not forget to remove the blender sealing ring.

Do not touch the blades. The blades are very sharp.

3 Clean the motor unit with a moist cloth.
4 Clean the removable parts in hot water with some washing-up liquid.

Note: All parts except the motor unit can be cleaned in the dishwasher

Storage

1 To store the mains cord, wind it round the base of the motor unit.

Disposal

- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 12).

Guarantee and service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country. You find its phone number in the worldwide guarantee leaflet. If there is no Customer Care Centre in your country, go to your local Philips dealer.

Recipes

Soy milk

Note: This recipe can only be prepared with the filter.

Always let the appliance cool down to room temperature after each batch you process.

Ingredients

1 Soak the soy beans for 4 hours before you process them. Then let them drain.
2 Put the soaked soy beans in the filter and pour the water into the blender jar. Blend for 40 seconds.
3 Pour the soy milk into a pan and bring to the boil. Then add some sugar and let the soy milk simmer until all sugar has dissolved.
4 Serve hot or cold.

Nourishing vegetable soup from Budapest

Ingredients

• 100 kohlrabi
• 150g potatoes
• 150g celery
• 50g carrots
• 100g smoked pork
• 550ml water
• 100g lentils (canned)
• 125g crème fraîche
• 10g parsley

- salt, freshly ground pepper, 1 stock cube, 1 bay leaf

1 Precut the ingredients into pieces of 2x2x2cm.
2 Put the kohlrabi, potatoes, celery, carrots and 350ml water in the blender jar in this order. Then blend for 30 seconds.
3 Put the blended ingredients in a pan and bring it to the boil.
4 Add the rest of the water (200ml), crème fraîche, lentils, pork, stock cube, herbs and seasonings.
5 Let the soup simmer for 30 minutes. Stir the soup regularly.

Troubleshooting

Problem Solution

The appliance does not work.	Check if you have plugged in the appliance. Also check if the blender jar or the mill beaker (specific types only) is properly attached.
The motor produces an unpleasant smell during processing.	It is common for a new appliance to give off an unpleasant smell or emit some smoke the first few times it is used. This phenomenon stops after you have used the appliance a few times. The appliance may also give off an unpleasant smell or emit some smoke if it has been used too long. In this case switch off the appliance and let it cool down to room temperature.
The appliance stops running because the blade unit is blocked.	Switch off the appliance and use a spatula to dislodge the ingredients that block the blade unit. We also advise you to process a smaller quantity and/or to cut ingredients into smaller pieces before you put them in the blender jar or mill beaker (specific types only).
Even though the filter is assembled in the blender jar, the fruit juice or soy milk contains pulp.	Make sure the filter is assembled properly in the blender jar. The grooves of the filter should fit exactly onto the ribs inside the blender jar. When you pour out the juice or soy milk, do not open the lid and also leave the measuring cup and the filter in the jar.
The blender jar leaks. Switch off the appliance and pour out the ingredients. Then remove the blade unit. Check if the sealing ring is assembled properly on the blade unit.
Powder or liquid leaks out of the mill (specific types only).	Switch off the appliance and remove the mill. Then remove the blade unit. Check if the sealing ring has been assembled properly on the blade unit. Do not use the mill to process liquids; use the blender instead.

Frequently asked questions

Question Answer

Can I clean all removable parts in the dishwasher?	All parts except the motor unit can be cleaned in the dishwasher. Clean the motor unit with a moist cloth.
What does 'pulse' mean? When you turn the control knob to pulse position, the appliance runs at high speed as long as you hold the knob in this position. Use the pulse position when you want to have more control over the process, for instance when you blend a milk shake or crush ice cubes.
Can I put boiling hot ingredients in the blender jar?	No, let the ingredients cool down to 80°C before you put them in the blender jar to avoid damage to the jar.
Can I chop raw meat in the mill (specific types only)?	No, this is not possible. Use the blender to chop raw meat.

Introducción

Diagram showing three open panels with grid patterns and curved arrows indicating rotation or movement (no text or symbols)