KSV29VW40 - Refrigerator BOSCH - Free user manual and instructions

Brand	Bosch
Model	KSV29VW40
Product type	Combined refrigerator with integrated freezer
Dimensions (H x W x D)	177 x 54 x 55 cm
Net weight	Approximately 65 kg
Energy class	A+
Annual energy consumption	Approximately 220 kWh/year
Total net capacity	Approximately 280 L (refrigerator 200 L, freezer 80 L)
Power supply	220-240 V / 50 Hz
Cooling type	Ventilated (No Frost) for the refrigerator, static cold for the freezer
Defrost	Automatic for the refrigerator, manual for the freezer
Interior lighting	LED
Number of shelves	4 glass shelves
Number of vegetable bins	2 bins
Number of door balconies	3 door balconies
Freezing capacity	Approximately 4 kg/24h
Power failure autonomy	Approximately 10 hours
Climate class	SN-ST (10 °C to 38 °C)
Noise level	42 dB(A)
Door reversibility	Yes
Spare parts available	Yes, via Bosch after-sales service
Repairability index	8/10 (estimate)

Frequently Asked Questions - KSV29VW40 BOSCH

How to set the temperature of my Bosch KSV29VW40 refrigerator?

The temperature is adjusted via the rotary knob or control panel. For the refrigerator, set between 2°C and 8°C. For the freezer, -18°C is recommended. Consult the manual for details.

How to defrost the freezer?

The refrigerator defrosts automatically. For the freezer, unplug the appliance, remove the food and leave the door open so that the ice melts. Never use sharp tools.

What to do if the appliance stops cooling?

Check that the appliance is plugged in, that the ambient temperature is within limits, and that the ventilation grilles are clean. If the problem persists, contact after-sales service.

How to clean the interior of the refrigerator?

Unplug the appliance, remove the shelves and clean with lukewarm water and vinegar or a mild detergent. Rinse and dry before restarting.

Are the shelves reversible?

No, the glass shelves are fixed in their position, but some can be moved to different levels. Consult the manual for possible positions.

How to reverse the door opening direction?

The door is reversible. Unplug the appliance, remove the hinges and reinstall them on the other side. A dedicated manual is available.

What is the power consumption of the model?

The estimated annual consumption is approximately 220 kWh, corresponding to class A+. Exact figures depend on usage.

Can I freeze fresh food in this model?

Yes, the freezer has a freezing capacity of approximately 4 kg per 24 hours. Wrap the food properly and respect the maximum load.

The audible alarm is triggered, what to do?

The alarm may be due to a door not properly closed or a temperature that is too high. Check the door seal and wait for the temperature to return to normal. If the alarm persists, contact after-sales service.

Where can I find spare parts for this model?

Spare parts are available from Bosch after-sales service and authorized dealers. Use the model number E-Nr. to identify parts.

USER MANUAL KSV29VW40 BOSCH

Free-standing appliance

Using the installation instructions ..... 8

Installation location 8

Installing appliances

next to each other 9

Changing over the door hinges ...... 9

Changing the door handle 10

Fitting the wall spacer 10

Aligning the appliance 10

Using the installation instructions

Please fold out the illustrated last page. These installation instructions refer to several models.

The diagrams may differ.

Installation location

A dry, well ventilated room is suitable as an installation location. The installation location should not be exposed to direct sunlight and not placed near a heat source, e.g. a cooker, radiator, etc. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances from the heat source:

■ 3 cm to electric or gas cookers. ■ 30 cm to an oil or coal-fired cooker.

The floor of the installation location must not give way; if required, reinforce the floor. If the floor is uneven, compensate with supports.

Distance from wall

When installing the appliance, ensure that the door can be opened by 90°.

Installing appliances next to each other

Fig. 2

When installing two appliances, ensure that the refrigerator is on the left and the freezer is on the right.

The right side panel of the refrigerator is heated slightly. This prevents condensation from forming between the appliances.

Attaching spacers

Fig. 3

1. On the right side of the refrigerator, degrease the adhesive areas with petroleum ether or spirit.
2. Stick spacers in all four corners at a distance of 5 cm from the side edges to ensure a minimum gap between the appliances.

Note

You can purchase a connection set from your dealer.

Changing over the door hinges

(if required)

We recommend that you have the door hinges changed over by our customer service. You can find out the costs for changing over the door hinges from your appropriate customer service.

Warning

While changing over the door hinges, ensure that the appliance is not connected to the power supply. Pull out the mains plug beforehand. To prevent damaging the back of the appliance, place adequate padding underneath. Carefully place the appliance on its back.

Change over the door hinges in numerical sequence. Fig. 1

Note

If the appliance is placed on its back, ensure that the wall spacer is not fitted.

Changing the door handle

(if required)

Fig. 4

Change the door handle in numerical sequence.

Fitting the wall spacer

Fig. 5

If available:

Fit wall spacers to obtain the indicated energy absorption of the appliance.

A reduced wall gap will not restrict the function of the appliance. The energy absorption may then change slightly.

Aligning the appliance

Place the appliance in the designated location and align. The appliance must be level. If the floor is uneven, use the front height-adjustable feet. Adjust the height-adjustable feet with a wrench.

Note

The appliance must be upright. Please align it with a spirit level.

2

3

4

5