FX3021 - Loudspeaker ALTEC LANSING - Free user manual and instructions

Product Type	2.1 Speaker System
Brand	Altec Lansing
Model	FX3021
Subwoofer Dimensions (W x H x D)	200 x 250 x 200 mm
Satellite Dimensions (W x H x D)	100 x 150 x 100 mm
Total System Weight	3.5 kg
Power Supply	AC 110-240V, 50/60Hz
Power Output (RMS)	30W
Input Connector	3.5mm Stereo Audio Jack
Controls	Volume, Bass, Power Switch
Frequency Response	40Hz - 20kHz
Maintenance Instructions	Wipe with a soft dry cloth; do not use solvents.
Cleaning	Unplug before cleaning; use a damp cloth for grilles.
Safety Precautions	Do not expose to water or moisture; do not open the unit.
Spare Parts Availability	Contact Altec Lansing support for replacement parts.
Repairability	User-replaceable fuse only; for other issues, consult a professional.
Compliance	CE, FCC, RoHS
Warranty	1 year limited warranty

Frequently Asked Questions - FX3021 ALTEC LANSING

How do I connect the Altec Lansing FX3021 to my computer?

Use a 3.5mm audio cable to connect the speaker's input jack to your computer's headphone or line-out port. Ensure the speakers are powered on and volume is adjusted.

What is the power consumption of the FX3021?

The system consumes approximately 30W RMS. It uses an AC power adapter (110-240V).

Can I use the FX3021 with a TV or gaming console?

Yes, if your TV or console has a 3.5mm headphone jack or RCA output (using an adapter). The FX3021 accepts standard analog audio input.

How do I clean the speakers?

Unplug the system before cleaning. Use a soft, dry cloth for the cabinet. For grilles, a slightly damp cloth can be used. Avoid liquid entry.

No sound coming from the speakers. What should I check?

Verify that the speakers are powered on and the volume is not muted. Check the audio cable connection and source device volume. Ensure the power cord is plugged securely.

Do the speakers have a remote control?

No, the Altec Lansing FX3021 does not include a remote control. All controls are located on the subwoofer or satellite speaker.

What is the ideal placement for the subwoofer?

Place the subwoofer on the floor near your desk or TV. Avoid corners to prevent excessive bass boom. Keep it away from walls for balanced sound.

Can I replace the speaker cables?

The satellite speakers typically have fixed cables. If damaged, contact Altec Lansing support for repair options. Do not attempt to replace them yourself.

Is the FX3021 compatible with Bluetooth?

No, the FX3021 is a wired speaker system. It does not support Bluetooth connectivity.

What should I do if the speakers produce a humming noise?

Humming can be caused by ground loops or interference. Try plugging the speakers into a different power outlet, away from other electronics. Ensure the audio cable is fully shielded.

USER MANUAL FX3021 ALTEC LANSING

Congratulations on purchasing your new Altec Lansing product. Please refer to this document for important product safety information prior to installation or use of the product.

Getting Assistance

If you cannot find the answer to your setup and performance questions in this package, you can also consult the FAQs in the customer support section of our Web site at www.alteclansing.com. If you live in North America and still can't find the information you need, please call our customer service team for assistance before returning the product to your retailer under their return policy.

Tel: [phone] (Toll Free in US and Canada)

Email: [e-mail]

If you live outside of North America, please visit our website at www.alteclansing.com and select your region to locate your country's distributor.

Safety Information

The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times.

Warranty

ALTEC LANSING ONE-YEAR LIMITED WARRANTY

What Does the Warranty Cover?

Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below.

What Is the Period of Coverage?

This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires. Some states and/or Member States in the European Union do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

What Does the Warranty Not Cover?

This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment. (For information on proper installation, operation and use consult the manual supplied with the product. If you require a replacement manual, you may download a manual from www.alteclansing.com.) Also, consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What Will Altec Lansing Do to Correct the Problem?

Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product.

How to Get Warranty Service

To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty period by email ([e-mail]). You must include in your email, your name, address, email address, telephone number, date of purchase and a complete description of the problem you are experiencing. In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 – please be prepared to provide the same information. If the problem appears to be related to a defect in material or workmanship, Altec Lansing will provide you a return authorization and instructions for return shipment. Return shipments shall be at the customer's expense, and the return must be accompanied by the original proof of purchase. You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing.

How Will State Law Affect Your Rights?

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please note that in the European Union, you as a consumer might have other legal rights under national legislation of European Union Member States governing the sale of Altec Lansing's goods. Those rights are not affected by this guarantee.

The above limited warranties and remedies are sole warranties and remedies available to purchaser, if, and to the extent, valid and enforceable under the applicable law.

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC Equipment

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office or your household waste disposal service.

Bienvenida

ASIA/PACIFIC 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008

©2008 Plantronics, Inc. All rights reserved.

ALTEC, ALTEC LANSING and the Altec Lansing logo are trademarks or registered trademarks of Altec Lansing, a division of Plantronics, Inc.

Plantronics and the logo design are trademarks or registered trademarks of Plantronics, Inc.

All other trademarks appearing herein are the property of their respective owners.

Designed by Altec Lansing in the USA. Made in China. H0710 R06