ALTEC LANSING Expressionist CLASSIC FX2020 - Loudspeaker

Expressionist CLASSIC FX2020 - Loudspeaker ALTEC LANSING - Free user manual and instructions

Find the device manual for free Expressionist CLASSIC FX2020 ALTEC LANSING in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ALTEC LANSING Expressionist CLASSIC FX2020 - page 3
View the manual : English EN Español ES Português PT
Pick your language and provide your email: we'll send you a specifically translated version.
Type 2.1 Speaker System
Model Expressionist CLASSIC FX2020
Speaker Configuration 2 Satellite Speakers + Subwoofer
Total Power Output 40 Watts RMS
Satellite Driver 3-inch Full Range
Subwoofer Driver 6.5-inch Down-firing
Frequency Response 35 Hz - 20 kHz
Input Connectors 3.5mm Aux, Stereo RCA
Dimensions (Subwoofer) 10.5 x 10.5 x 12 inches
Dimensions (Each Satellite) 5.5 x 4.5 x 7 inches
Weight (Total) 12.5 lbs
Power Supply AC 120V / 60Hz
Power Consumption 60 Watts
Features Volume Control, Bass Control, Power LED
Cable Length (Satellite) 6 ft
Enclosure Type Bass-Reflex (Subwoofer)
Cleaning Instructions Wipe with a dry, soft cloth. Do not use liquids.
Safety Precautions Keep away from heat sources and moisture. Unplug during storms.
Warranty 1 Year Limited

Frequently Asked Questions - Expressionist CLASSIC FX2020 ALTEC LANSING

How do I connect the Altec Lansing Expressionist CLASSIC FX2020 to my computer?
Connect the 3.5mm auxiliary cable from the speaker system's input to your computer's headphone jack. Ensure the speaker is plugged into power and turned on.
What should I do if there is no sound from the speakers?
Check that the power cable is securely connected and the power switch is on. Verify the volume knob is turned up. Also ensure the audio source is playing and the cable is fully inserted.
Can I use the speaker system with a TV?
Yes, if your TV has a 3.5mm headphone jack or RCA audio outputs. Use the appropriate cable to connect to the speaker's input.
How do I clean the Altec Lansing Expressionist CLASSIC FX2020?
Unplug the system and wipe the exterior with a dry, lint-free cloth. Do not use any liquids or abrasive cleaners.
Is the subwoofer wireless?
No, the subwoofer is wired to the control pod or satellite speakers via an included cable.
What is the power output of this speaker system?
The total system power is 40 Watts RMS, with the subwoofer handling the low frequencies and satellites handling mid/high frequencies.
Can I mount the satellite speakers on a wall?
The satellites do not have built-in keyhole mounts. Use a small shelf or stand. Do not attempt to mount them unless the manual provides specific instructions.
Why is the subwoofer buzzing or humming?
A humming sound may be due to a ground loop. Try plugging the speaker system into a different power outlet. Keep the audio cables away from power cords.
How do I adjust the bass level?
Use the bass control knob located on the side of the subwoofer or control pod. Turn clockwise to increase bass, counterclockwise to decrease.
What is the warranty coverage?
The Altec Lansing Expressionist CLASSIC FX2020 comes with a one-year limited warranty against defects in materials and workmanship.

User questions about Expressionist CLASSIC FX2020 ALTEC LANSING

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual Expressionist CLASSIC FX2020 - ALTEC LANSING and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Expressionist CLASSIC FX2020 by ALTEC LANSING.

USER MANUAL Expressionist CLASSIC FX2020 ALTEC LANSING

Congratulations on purchasing your new Altec Lansing product. Please refer to this document for important product safety information prior to installation or use of the product.

Getting Assistance

If you cannot find the answer to your setup and performance questions in this package, you can also consult the FAQs in the customer support section of our Web site at www.alteclansing.com. If you live in North America and still can't find the information you need, please call our customer service team for assistance before returning the product to your retailer under their return policy.

Tel: 800-258-3288 (Toll Free in US and Canada)

Email: csupport@alteclansing.com

If you live outside of North America, please visit our website at www.alteclansing.com and select your region to locate your country's distributor.

Safety Information

ALTEC LANSING Expressionist CLASSIC FX2020 - Safety Information - 1

The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

ALTEC LANSING Expressionist CLASSIC FX2020 - Safety Information - 2

Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

ALTEC LANSING Expressionist CLASSIC FX2020 - Safety Information - 3

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water. This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. The apparatus should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The apparatus must not be placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings. Ventilation should not be impeded by covering the openings with items such as newspapers, tablecloths, curtains, etc..
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. No naked flame sources, such as lighted candles, should be placed on the apparatus.
  10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fill into your outlet, consult an electrician for the replacement of the obsolete outlet.
  11. Protect the power cord from being walked on or pinched – particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  12. Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times.

  13. Power source – use only power supplies of the type specified in the operating instructions or as marked on the appliance. If a separate power supply is included with this apparatus, do not substitute with any other power supply – use only manufacturer-provided power supplies.

  14. Unplug this apparatus during lightning storms or when unused for long periods of time.
  15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For service, refer to qualified service personnel, return to the dealer, or call the Aitec Lansing service line for assistance.
  16. For products which incorporate batteries, please refer to local regulations for proper battery disposal.

  17. Only use attachments/accessories specified by the manufacturer.

  18. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

Warranty

ALTEC LANSING ONE-YEAR LIMITED WARRANTY

What Does the Warranty Cover?

Allec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below.

What Is the Period of Coverage?

This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires. Some states and/or Member States in the European Union do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

What Does the Warranty Not Cover?

This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment. (For information on proper installation, operation and use consult the manual supplied with the product. If you require a replacement manual, you may download a manual from www.alteclansing.com.) Also, consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What Will Altec Lansing Do to Correct the Problem?

Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product.

How to Get Warranty Service

To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty period by email (support@alteclansing.com). You must include in your email, your name, address, email address, telephone number, date of purchase and a complete description of the problem you are experiencing. In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC98 – please be prepared to provide the same information. If the problem appears to be related to a defect in material or workmanship, Altec Lansing will provide you a return authorization and instructions for return shipment. Return shipments shall be at the customer's expense, and the return must be accompanied by the original proof of purchase. You should ensure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing.

How Will State Law Affect Your Rights?

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please note that in the European Union, you as a consumer might have other legal rights under national legislation of European Union Member States governing the sale of Altec Lansing's goods. Those rights are not affected by this guarantee.

The above limited warranties and remedies are sole warranties and remedies available to purchaser, if, and to the extent, valid and enforceable under the applicable law.

International customers: For information regarding the distribution of Aitec Lansing products in your country, please visit www.alteclansing.com and click on your region.

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT

ALTEC LANSING Expressionist CLASSIC FX2020 - DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT - 1

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.

For more detailed information about recycling of this product, please contact your local city office or your household waste disposal service.

Bienvenue

ASIA/PACIFIC 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008

©2008 Plantronics, Inc. All rights reserved.

ALTEC, ALTEC LANSING and the Altec Lansing logo are trademarks or registered trademarks of Altec Lansing, a division of Plantronics, Inc.

Plantronics and the logo design are trademarks or registered trademarks of Plantronics, Inc.

All other trademarks appearing herein are the property of their respective owners.

Designed by Altec Lansing in the USA. Made in China. H0710 R02

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ALTEC LANSING

Model : Expressionist CLASSIC FX2020

Category : Loudspeaker