EWT 10420 W - Washing machine ELECTROLUX - Free user manual and instructions

Product Type	Freestanding Washing Machine
Brand	Electrolux
Model	EWT 10420 W
Capacity	10 kg
Spin Speed	1200 rpm
Energy Class	A+++
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	70 kg
Voltage	220-240 V
Frequency	50 Hz
Water Consumption per Cycle	45 L
Noise Level (Wash/Spin)	56 dB / 76 dB
Number of Programs	15
Key Programs	Cotton, Synthetics, Delicates, Wool, Quick 30, Rinse & Spin, Drain & Spin
Child Lock	Yes
Door Type	Front-load with porthole
Display	LED
Start Delay	Up to 24 hours
Remaining Time Display	Yes
Self-Cleaning	Drum Clean program

Frequently Asked Questions - EWT 10420 W ELECTROLUX

How do I install the washing machine?

Remove all transport bolts, level the machine using the adjustable feet, connect the water inlet hose to a cold water tap with a 3/4 inch thread, and connect the drain hose to a standpipe or sink outlet.

What should I do if the machine does not start?

Check that the door is fully closed, the water tap is open, and the machine is plugged in. Also ensure the program is selected and the start/pause button is pressed.

How to clean the detergent drawer?

Remove the drawer by pressing the release catch, rinse under warm water, and use a brush to remove residue. Reinsert after drying.

What does the error code E10 mean?

E10 indicates a water filling problem. Check that the water tap is fully open, the inlet hose is not kinked, and the filter in the hose is not blocked.

How often should I run a drum cleaning cycle?

Run the Drum Clean program once a month to prevent buildup of detergent residue and odors.

Can I wash wool items?

Yes, use the Wool program with cold water and a mild detergent suitable for wool.

What is the maximum spin speed?

The maximum spin speed is 1200 rpm, but you can adjust it lower for delicate fabrics.

How to unlock the child lock?

Press and hold the Child Lock button for 3 seconds until the symbol disappears from the display.

What should I do if the machine vibrates excessively?

Ensure the machine is level, the floor is stable, and all transport bolts are removed. Also avoid overloading and distribute laundry evenly.

How to replace the inlet hose filter?

Turn off the water, unscrew the hose from the tap, remove the filter with pliers, clean or replace it, and reattach the hose.

USER MANUAL EWT 10420 W ELECTROLUX

We were thinking of you

when we made this product

Welcome to the world of Electrolux

Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will provide a superior User Experience delivering Ease-of-Mind. Good luck!

Description of the appliance .... 7

Personalisation 8

How to run a wash cycle? 9

Washing guide 14

Programmes table 16

Consumption 17

Care and cleaning 18

Operating problems 19

Technical specifications .... 22

Installation 22

Environment 25

The following symbols have been used in this user guide :

Important information about concerning your safety and information on how to avoid damaging the appliance.

General information.

Information concerning the environment.

Warnings

These warnings are for the safety of you and others around you.

Please read these points carefully before installing and using your appliance. Thank you for your attention.

Keep this user manual with your appliance. If the appliance is sold or given to another person, please make sure this user manual is included. This way, the new user will have the relevant operating instructions and warnings.

General safety

• Do not modify or attempt to modify this appliance. This would put yourself in danger.
• Ensure that all coins, safety pins, brooches, screws etc have been removed before starting a washing programme. If left in washing, they can seriously damage the appliance.
• Use the amount of detergent recommended in the paragraph "Using the right amount of detergent".
• Put small items together (socks, belts etc.) in a small linen bag or pillow case.
• Unplug and close inlet hose tap after using appliance.
  • Always disconnect the power supply from the appliance before cleaning or maintenance.
• Do not machine wash clothes with ribbing, unfinished or torn material.

Installation

• Unpack or ask for the appliance to be unpacked immediately upon arrival. Check the outside of the appliance is not damaged in any way. Put any complaints you may have in writing on your copy of the delivery receipt.
• The appliance must be untied before connecting to power supply or using. If all transit packaging is not completely removed, the appliance or surrounding furniture could be damaged.
• Connection to the water supply must be carried out by a qualified plumber.
• If your domestic electrical circuit needs adapting to allow the appliance to be plugged in, use a qualified electrician.
• Ensure that, after installation, the power cable is not trapped under the appliance.
• If the appliance is installed on carpeted floor, ensure that the carpet does not obstruct any ventilation ducts located at the base of the appliance.
• The appliance must be equipped with an earthed power plug which conforms to regulations.
• Before connecting your appliance to the power supply, carefully read the instructions in the chapter entitled "Electrical connection".
• Replacing the power cable should only be carried out by the After Sales Service.
• The manufacturer cannot be held responsible for any damage resulting from incorrect installation.

6 warnings

Precautions to be taken against frost

If your appliance is exposed to temperatures below 0^ C, the following precautions must be taken :

• Close the tap and disconnect the inlet hose.
• Place the end of this hose and the drain hose in a basin on the floor.
• Select the Drain programme let it run until the end of the cycle.
• Disconnect the appliance from the power supply by turning the program selector to "Stop".
• Unplug the appliance.
• Screw the inlet hose back on and replace the drain hose.

This way, the water remaining in the hoses will be drained away, avoiding any ice formation which would damage your appliance.

Before turning your appliance on again, ensure that it is installed in an area where the temperature will not fall below freezing.

Use

- Your appliance is intended for normal domestic use. Do not use the appliance for commercial or industrial purposes or for any purpose other than the one it was designed for: washing, rinsing and spinning.

- Only wash items treatment. Refer to the instructions on the label of each item.

- Do not put items into the washing machine which have had stains removed with petrol, alcohol, trichlorethylne etc. If such stain removers have been used, wait until the product has evaporated before putting

these items into the drum.

- Your appliance has been designed for use by adults. Ensure children do not touch the appliance or use it as a toy.

suitable for this

Description of the appliance

1 The control panel
2 Lid handle
3 Filter access cover
4 Lever for moving the appliance
5 Adjustable levelling feet

Dispenser box

Prewash
Wash
Softener (do not fill above the MAX symbol M)

White plastic tray with internal cavity and labeled parts (II, III, IV), no readable text or symbols beyond labels

The control panel

1 Programme selector
2 Pushbuttons and their functions
3 Display

4 "Start/Pause" pushbutton
5 "Time Manager" pushbuttons

8 description of the appliance / personalisation

The symbols

1 Time manager
2 Temperature
3 Child safety

4 Cycle running
5 Length of cycle or Timer delay countdown

Personalisation

Child safety

This option provides two types of locking :

- if the option is activated after the cycle has started, no changes to the options or program are possible.

The cycle runs and you must deactivate the option to run a new cycle.

- if the option is activated before the cycle has started, the appliance cannot be started.

To activate child safety, turn appliance on and press "Rinse plus" and "Delay start" simultaneously until the confirmation symbol comes on in the display.

graph TD
    A["Warning Icon"] --> B["Input Button 1"]
    A --> C["Input Button 2"]
    A --> D["Input Button 3"]

The appliance memorises the selection of this option.

To deactivate child safety, repeat the process.

Audible signal

When a button is depressed, an audible signal sounds, at the end of a programme or to indicate a fault.

To deactivate, turn appliance on and press "Prewash" and "Rinse plus" simultaneously until the beep sounds.

The signal is only active if alarm sounds.

To reactivate it, repeat the same process.

How to run a wash cycle?

Using for the first time

i

• Ensure the electrical and water connections comply with the installation instructions.
• Remove the polystyrene insert and all other items inside the drum.
• Run an initial wash cycle at 90°C, without any washing but with detergent to clean the water tank.

Daily use

Loading washing

• Open the lid of the appliance.
• Open the drum by depressing the locking button A: The two shutters unlock automatically.
• Load the washing, close the drum and the lid of your washing machine.

Close-up of a computer monitor with ventilation slots and a blue button labeled 'A' (no readable text or symbols beyond label)

!

Before closing the lid of your appliance, ensure that the drum is properly closed :

• When the two shutters are closed,
• locking button A released.

Proportioning of detergents

Your washing machine has been designed to reduce your water and detergent consumption. You can therefore reduce the amounts recommended by detergent manufacturers.

Pour the amount of washing powder into the washing L and prewash compartments if you have selected the "prewash" option. Pour fabric softener into the compartment if necessary If you use another detergent type, refer to the section "detergents and additives" in the washing guide.

Selection of desired programme

You can find the right programme for different types of washing in the programme table (see "Programme table").

graph TD
    A["Cotton AA"] --> B["Special"]
    B --> C["Sport"]
    C --> D["Wool"]
    D --> E["Handwash"]
    E --> F["Silk"]
    F --> G["Lingerie"]
    G --> H["Rinses"]
    H --> I["Drain"]
    I --> J["Spin"]
    J --> K["Jeans"]
    K --> L["Easy iron"]
    L --> M["Delicates"]
    M --> N["Synthetics"]
    N --> O["Cotton"]
    O --> P["Time Manager"]

Turn the programme selector to the required programme. The "Start/Pause" pushbutton flashes green.

The symbols which correspond to the different stages of the cycle are displayed (Wash, Inse, Drain, Spin).

!

If you turn the programme selector to another programme while a cycle is in

10 how to run a wash cycle

progress, the appliance will ignore the new selected programme. "Err" flashes and the "Start/Pause" pushbutton flashes red for a few seconds then the current cycle display reappears.

Selecting the temperature

Press the "Temperature" pushbutton repeatedly to increase or decrease the temperature if you want your washing to be washed at a different temperature to the one selected by the appliance. The symbol means a cold wash.

Selecting the spin speed

Press the "Spin" pushbutton to change the spin speed, if you want your washing to be spun at a different speed to the one selected by the appliance. You can also select "No spin", "Rinse hold" or "Night silence plus"

The maximum speeds are :

for Cotton, Jeans, Cotton AA : 1100 rpm (EWT 11420W), 1000 rpm (EWT 10420W),

for Handwash, Wool : 900 rpm (EWT 11420W), 1000 (EWT 10420W),

for Synthetics, Easy iron, Lingerie, Sport: 900 rpm,

for Delicates, Silk : 700 rpm.

At the end of the programme, if you have selected “Rinse and hold” or “Night silence plus” 📄you then need to select

a "Spin" or "Drain" programme to finish the cycle.

"Night silence plus"

The washing machine does not empty the water after the final rinse which prevents the washing from creasing. Because there are no spin cycles, the washing programme is very quiet and can be selected at night. In Cotton and Synthetics programmes, the rinsing cycle uses more water.

Selecting options

You must select the different options after selecting the programme and before pressing the "Start/Pause" pushbutton (see "Programme table"). Press the desired button(s); the corresponding lights come on. If pressed again, the lights go out. If one of the options is not compatible with the selected programme, "Err" flashes on the display and the "Start/Pause" pushbutton flashes red.

"Prewash" option

Simple diagram with sun, battery, and clock icons (no text or labels)

The appliance runs a prewash at 30^ C max. The prewash finishes with a short spin cycle for cotton or synthetic programmes, and with an empty cycle for delicates programmes.

"Rinse plus" option

The washing machine will add one or more rinses during the cycle. This option is recommended for people with sensitive skin and in soft water areas.

- Temporary :

Simple diagram with icons for sun, battery, clock, and two blank boxes (no text or symbols)

Press the "Rinse plus" pushbutton 📋 The option is only active for the selected programme.

- Permanent :

Simple diagram with icons and symbols (no text or labels)

Hold down the "Prewash" and "Delay start" pushbuttons for a few seconds. The option is permanently activated, even if the appliance is switched off.

To deactivate it, repeat the process.

"Delay start" option ⏻

This option allows you to delay the start of a wash programme by 30, 60, 90, 2 hours to 20 hours.

The selected time appears on the display for a few seconds ^* .

You can change or cancel the delayed start time at any time before you press

the "Start/Pause" pushbutton, by pressing the "Delay start" ⏻pushbutton again (0' indicates immediate start). If you have already pressed the "Start/Pause" pushbutton and you want to change or cancel the delayed start, proceed as follows:

• To cancel the delayed start and start the cycle immediately, press "Start/Pause" and then "Delay start" ⏻ Press "Start/Pause" to start the cycle.
• To change the timer delay period, you must go through the "Stop" position and reprogramme your cycle.

The lid will be locked during the delayed start time. If you need to open it, you must first pause the appliance by pressing the "Start/Pause" pushbutton. After closing the lid again, press the "Start/Pause" pushbutton.

Time Manager

The washing machine will suggest the "Normally soiled laundry" cycle by default. The cycle can be made longer or shorter by using the "Time Manager" pushbuttons. The level of soiling of the laundry is also indicated.

Heavily soiled laundry

Normally soiled laundry

Lightly soiled laundry

Very lightly soiled laundry or half load

The availability of these different levels varies depending on the selected programme type.

Start of the programme

Press the "Start/Pause" pushbutton to start the cycle; the corresponding light will com green.

It is normal for the programme selector to remain stationary during the cycle. The symbol for the current cycle and the remaining time appear on the display.

If a delayed start has been selected, the countdown appears on the display (hour by hour, then 90, and minute by minute from 60 min).

Warming up

During the cycle, the ⚙ symbol comes on when the appliance is reaching the right temperature.

Interrupting a programme Adding washing

When the "Add washing" light is on, you can add washing by proceeding as follows.

Press the "Start/Pause" pushbutton: the corresponding light will flash green while the appliance is paused and the message "Pause" is displayed. The lid can only be opened around 2 minutes after the washing machine has come to a stop. Press the "Start/Pause" pushbutton again to continue the programme.

Modifying the programme in progress

Before making any changes to the current programme, you need to pause the washing machine by pressing the "Start/Pause" pushbutton. If the modification is not possible, "Err" flashes in the display and the "Start/Pause" pushbutton flashes red for a few seconds. If you still decide to change the programme, you must cancel the current programme (see below).

Cancelling the programme

If you want to cancel the programme, turn the programme selector to the "Stop" position.

End of the programme

The washing machine stops automatically ; the "Start/Pause" pushbutton goes out and "0" flashes on the display. The lid can only be opened around 2 minutes after the washing machine has come to a stop.

Turn the programme selector to the "Stop" position.

Remove washing

Unplug and close water inlet tap.

We recommend leaving the lid and drum open after use to ventilate the water tank.

Standby mode

If the appliance is on but no commands are selected for 10 min before or after a cycle, it goes into standby mode. The screen light goes out and "Start/Pause" flashes slowly.

To exit standby mode, simply press any pushbutton or turn the programme selector.

Washing guide

i

Sorting and preparing the washing

• Sort washing by type and care label (refer to International symbols section below) : normal wash for tough fabrics which can withstand intense washing and spinning cycles ; delicate wash for delicate fabrics which need to be treated with care. For mixed loads, loads with items of different types of material, choose a programme and a temperature suitable for the most fragile material.
• Wash whites and colours separately: Otherwise, whites will be coloured or will turn grey.
• New coloured clothes often contain excess dye. It is recommended to wash such items separately the first time. Follow care instructions “wash separately” and “wash separately several times”.
  • Empty pockets and unfold items.
• Remove loose buttons, pins and fasteners. Close zip fasteners, tie ups laces and straps.
• Turn multilayered fabrics (sleeping bags, anoraks, etc.), coloured headwear, wool and material with printed designs inside out.
• Wash small fragile items (socks, tights, bras, etc) in a net bag.
• Take special care with curtains. Remove hooks and place net curtains in a net or bag.

Wash loads depending on type of materials

The amount of washing placed in the drum must not exceed the maximum capacity of the washing machine. This capacity can vary depending on the type of materials. Reduce the quantity if washing is heavily soiled or made of absorbant material.

Not all textiles have the same volume in the drum or the same water absorption levels. In general, the drum must therefore be filled :

• to full capacity but avoiding excessive pressure on cotton, linen and cotton/linen mixtures,
• to half capacity for processed cottons and synthetic fibres,
• to a third of its capacity for very fragile items such as net curtains and woollens.

For mixed loads, fill drum depending on most fragile materials.

Detergents and additives

Only use detergents and additives designed for use in a washing machine. Refer to manufacturer's recommendations and also Dispenser box and Using the right amount of detergent sections.

We do not recommend mixing different types of detergents. This may spoil the washing.

The amount of detergent to be used depends on the size of the load, the hardness of the water and how heavily soiled the washing is.

If the water is soft, reduce the amount slightly. If the water contains lime scale (a descaler is recommended) or if the washing is heavily soiled or stained, increase the amount slightly.

You can obtain information on the hardness level of water in your area by contacting your water company or other competent source.

There are no restrictions on the use of powder detergents.

Liquid detergents must not be used when a prewash has been selected. For cycles without prewash, they can be added either via means of a dosing ball, or in the detergent compartment. In either case, the wash cycle must be started immediately.

Detergent tablets or doses must be placed in the detergent compartment of your appliance's dispenser box.

For stain removal before a wash cycle, please refer to manufacturer's recommended amounts and instructions. If you use a detergent to remove stains, the wash cycle must be started immediately.

International symbols

NORMAL WASH
	W
DELICATE WASH
BL
CI

Programmes table

Programme / Type of washing Load Possible options
Cotton : White or colour, e.g., normally soiled work clothes, bed linen, table linen, body linen, towels.	5,5 kg	Night silence plus Prewash Rinse plus Delay start Time manager
Synthetics : Synthetic fabrics, body linen, coloured fabrics, non-iron shirts, blouses.	2,5 kg
Delicates : For all delicate materials, for example, curtains.	2,5 kg
Easy iron : Reduces creasing and makes ironing easier.	1,0 kg	Prewash Rinse plus Delay start
Jeans : For washing denim clothes. The Rinse plus option is activated.	3,0 kg	Night silence plus Prewash Delay start
Spin : A spin cycle from 500 to 1100/1000 ^+ rpm after a Rinse hold (or Night silence plus).	5,5 kg	Delay start
Drain : Runs an empty cycle after a Rinse hold or (Night Silence Plus).	5,5 kg
Rinses : Hand washed items can be rinsed in this program.	5,5 kg	Night silence plus Rinse plus Delay start
Lingerie : For very delicate items, like lingerie. 1,0 kg		Night silence plus Delay start
Silk : Fabric machine washable at 30°C. 1,0 kg
Handwash : Very delicate items carrying the “wash by hand” label.	1,0 kg
Wool : Machine washable wool carrying the labels “pure new wool, machine washable, does not shrink”.	1,0 kg
Sport : For dirty outside sport clothes. The Prewash option is activated.	2,5 kg	Night silence plus Rinse plus Delay start
Cotton AA** : White or colour, e.g., normally soiled work clothes, bed linen, table linen, body linen, towels.	5,5 kg	Night silence plus Prewash Rinse plus Delay start

* Depending on model.
** Reference programme for test conforming to CEI 456 standard ( Cotton AA 60° programme).

Consumption

Programme Washing type	Temperatures°C Litres	Average consumption**
		kWh Time
Cotton cold - 90 63 2,10				See display
Synthetics cold - 60 45 0,80
Delicates cold - 40 50 0,50
Easy iron cold - 60 55 0,55
Jeans cold - 60 55 0,90
Spin - - 0,015
Drain - - 0,002
Rinses - 32 0,05
Lingerie	cold - 40	50	0,50
Silk	cold - 30	40	0,30
Handwash	cold - 40	45	0,45
Wool	cold - 40	45	0,45
Sport	cold - 40	50	0,70
Cotton AA*	40 - 90	63	1,80

* Reference programme for test conforming to CEI 456 standard (Cotton AA 60° programme) :
46 L / 0,93 kWh / 140 min
** Average figures which can vary depending on conditions of use.
Consumptions shown refer to the maximum temperature for each programme.

Care and cleaning

Unplug the appliance before cleaning.

Descaling the appliance

To descale the appliance, use an appropriate non-corrosive product designed for washing machines. Read product label for recommended amounts and how often descaling should be carried out.

The exterior

Use warm soapy water to clean the exterior of the appliance. Never use alcohol, solvents or similar products.

Dispenser box

To clean, proceed as follows :

Close-up of a hand holding a white appliance with a textured handle and arrows pointing to it (no visible text or symbols)

Close-up of hands holding white plastic objects with directional arrows indicating movement (no text or symbols)

Hand cleaning a tiled wall with a hand holding a sink (no text or symbols visible)

Hand placing a transparent plastic tray into a tiled wall with a faucet (no text or symbols visible)

Close-up of hands holding a white plastic device with black arrows pointing to the handle (no text or symbols visible)

Close-up of a hand holding a white plastic device with a textured surface, showing a finger inserted (no text or symbols visible)

Drainage filter

Clean the filter located at the base of the appliance regularly :

Close-up of a hand pressing down on a white appliance button with a black arrow pointing to it (no text or symbols visible)

Hand placing a white object into a white container with a curved arrow indicating rotation (no text or symbols visible)

Close-up of a hand inserting a plastic bag into a white appliance, with no visible text or symbols.

Hand holding a small white object against a tiled wall, next to a metallic faucet (no text or symbols visible)

Close-up of a hand inserting a plastic bag into a white appliance with a black handle (no text or symbols visible)

Hand pressing a button on a white surface with a circular arrow indicating rotation (no text or symbols visible)

Hand pressing a button on a white electronic device (no visible text or symbols)

Water inlet filters

To clean the 2 filters, proceed as follows :

Close-up of hands cleaning a white basin with a blue plastic component (no text or symbols visible)

Close-up of a hand holding a blue plastic bottle next to a metal pipe fitting (no text or symbols visible)

Operating problems

Numerous checks were carried out on your appliance before it left the factory. However, should you notice a malfunction, please refer to the sections below before contacting the after-sales service.

Problems Causes
The washing machine doesn’t start or doesn’t fill :	the appliance isn’t plugged in correctly, the electrical installation isn’t working,the lid of your appliance and the drum shutters aren’t closed firmly,the programme start command hasn’t been properly selected,there is a power failure,the water supply has been cut off,the water inlet tap is closed,the water inlet filters are dirty,a red tab appears on the water inlet hose.
The appliance fills but empties straight away :	the drainage U-piece is fixed too low (see installation section).
The washing machine doesn’t rinse or doesn’t empty :	the drain hose is blocked or bent,the drainage filter is obstructed,the out of balance detector has been activated:washing is unevenly distributed in the drum,the “Drain” programme or “Night Silence Plus”or “Rinse hold” option have been selected,the height of the drainage U-piece is unsuitable.
You have found water around the washing machine :	too much detergent has caused foam to over-flow,the detergent is unsuitable for machine washing,the drainage U-piece isn’t attached correctly,the drainage filter hasn’t been put back in place,the water inlet hose is leaking.
Wash is unsatisfactory: • the detergent is unsuitable for machine washing,• there is too much washing in the drum,• the wash cycle is unsuitable,• there isn’t enough detergent.
The appliance vibrates, is noisy:	• the appliance hasn’t been untied properly (see untying section),• the appliance isn’t level and is unbalanced,• the appliance is too close to the wall or furniture,• washing is unevenly distributed in the drum,• the load is too small.
the wash cycle is much too long:	• the water inlet filters are dirty,• the power or water supply has been cut off,• the motor overheating detector has been activated,• the water inlet temperature is lower than usual,• the foam detection security system has been activated (too much detergent) and the washing machine has begun draining the foam,• the out of balance detector has been activated: an extra phase has been added to distribute washing more evenly in the drum.
The washing machine stops during a wash cycle:	• the water or electricity supply is defective• a Rinse hold has been selected,• the drum shutters are open.
The lid doesn’t open at the end of the cycle:	• the “immediate opening”* light is not lit,• the temperature inside the drum is too high,• the lid unlocks 1 - 2 minutes after the end of the cycle*.
The E40 error code appears in the display* and the Start/Pause pushbutton flashes red***:	• the lid isn’t closed properly.
The E20 error code appears in the display** and the Start/Pause pushbutton flashes red*** :	the drainage filter is obstructed,the drain hose is blocked or bent,the drain hose is fixed too high (see “Installation” section).the drainage pump is blocked,the standpipe is blocked.
The E10 error code appears in the display** and the Start/Pause pushbutton flashes red*** :	the water inlet tap is closed,the water supply has been cut off.
The EFO error code appears in the display** and the Start/Pause pushbutton flashes red*** :	the drainage filter is obstructed,the anti-flooding security system has been activated, please proceed as follows:- close the water inlet tap,- empty the appliance for 2 minutes before unplugging,- call the after-sales service.
The drainage pump runs constantly, even when the appliance is inactive :	the anti-flooding security system has been activated, please proceed as follows:- close the water inlet tap,- empty the appliance for 2 minutes before unplugging,- call the after-sales service.
Softener runs directly into the drum when filling the dispenser box :	you have gone past the MAX indicator.

* Depending on model.
**On some models, the audible signals can sound.
*** After solving any problems, press the "Start/Pause" pushbutton to restart the interrupted programme.

Technical specifications

DIMENSIONS Height	WidthDepth	850 mm400 mm600 mm
LINE VOLTAGE / FREQUENCY POWER CONSUMPTION		230 V / 50 Hz2300 W
WATER PRESSUREConnection to water supply	MinimumMaximum	0,05 MPa (0,5 bar)0,8 MPa (8 bar)Type 20x27

This appliance conforms to the CEE 89-336 directive concerning the limiting of radio-electric interference and the 2006/95/CE directive concerning electrical safety.

Installation

Remove all protective packaging for transit before using for the first time. Keep in case needed for future transit: Transporting a non-secured appliance may damage internal components and cause leakages and malfunctions. The appliance can also be damaged through physical contact.

Unpacking

Person pushing a white cylindrical device with a curved arrow indicating rotation (no text or symbols visible)

Person kneeling on a chair holding a white object with an arrow indicating motion (no visible text or symbols)

Person placing a white plastic bag into a white cylindrical container (no text or symbols visible)

Hand placing a plastic bag into a white disposable drawer with a hand holding the lid (no text or symbols visible)

Person placing a plastic bag into a washing machine (no visible text or symbols)

White plastic bag with a hand holding an open lid, showing internal waste (no text or symbols visible)

Hand cleaning a white trash bin with a cloth (no text or symbols visible)

White plastic object with a red patch placed on a translucent sheet of paper, no visible text or symbols.

Untying

Close-up of hands holding a white plastic component with arrows indicating direction (no text or symbols visible)

Close-up of four electronic components with metallic and white fittings, arranged on a wooden surface (no text or symbols visible)

To install your washing machine at the same level as surrounding furniture, proceed as follows :

Close-up of a hand using a red power tool to adjust or install a component on a wall (no visible text or symbols)

Close-up of a hand inserting a small white plastic component into a metal panel (no text or symbols visible)

Close-up of a hand using a tool to press a circular component, no visible text or symbols

Close-up of a hand holding a small mechanical component, no visible text or symbols

Hand holding a tool interacting with a mechanical component, no visible text or symbols

Close-up of a hand holding a metallic tool with a circular component, no visible text or symbols

Close-up of a hand holding a metallic tool with a circular component and arrow indicating direction (no text or symbols visible)

Close-up of a hand holding a small mechanical component inside a stainless steel appliance (no visible text or symbols)

Hand holding a white plastic ring with a black arrow pointing to a circular component (no text or symbols visible)

Close-up of a hand adjusting a wall-mounted device with a circular dial and a black button (no visible text or symbols)

Water supply

Install the supplied water inlet hose at the rear of your washing machine by proceeding as follows (Do not reuse an old hose):

Person washing a white appliance with a lid and arrow indicating the process (no text or symbols visible)

Close-up of hands installing a metal component into a rack (no visible text or symbols)

Close-up of a mechanical component with blue and black surfaces, no visible text or symbols

Hand holding a blue plastic bottle connected to a wall-mounted pipe fitting with a rotating arrow (no text or symbols visible)

Open the water inlet tap.

Check there are no leaks.

The water inlet hose can not be extended. If it is too short, please contact the after-sales service.

Drainage

- The connector at the end of the flexible hose can be attached to all common types of standpipe.

Attach the connector to the standpipe with the hose clamp supplied with the appliance.

Close-up of a washing machine with blue pipes and a white cloth, no visible text or symbols

- Fit the U-piece on the drainage hose. Place everything in a drainage point (or in a sink) at a height of between 70 and 100 cm. Ensure it is positioned securely. Air must be able to enter the end of the hose, to avoid any risk of siphoning.

The drain hose must never be stretched. If it is too short, contact a tradesperson.

Electrical connection

This washing machine must only be connected in single-phased 230 V.

Check the fuse size : 10 A for 230 V.

The appliance must not be connected with an extension lead or multi-plug adaptor.

Ensure that the plug is earthed and that it is in accordance with current norms.

Positioning

Position the appliance on a flat and hard surface in a ventilated location. Ensure the appliance does not come into contact with the wall or other furniture.

To move the appliance, proceed as follows :

Close-up of a hand pressing down on a white appliance with a curved arrow indicating rotation (no text or symbols visible)

To move your appliance, place it on its rollers by pulling the lever located at the base of the appliance hard from right to left. Once the appliance is in

the desired position, push the lever back to its original position.

Accurate levelling avoids vibrations, noise and prevents the appliance from moving when running.

Close-up of a hand holding a small electronic device with a circular annotation (no visible text or symbols)

Close-up of a hand holding a small electronic component on a black surface (no visible text or symbols)

Environment

Disposing of the appliance

All materials carrying the symbol are recyclable. Dispose of them at a waste collection site (enquire at your local council) for collection and recycling.

When disposing of your appliance, remove all parts which could be dangerous to others: cut off the power supply cable at the base of the appliance.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Protecting the environment

To save water and energy and therefore help protect the environment, we recommend the following :

• Whenever possible, use the appliance at full capacity and avoid partial loads.
• Only use the prewash and soak programmes for heavily soiled items.
• Use an appropriate amount of detergent for the hardness of the water (cf. section "Using the right amount of detergent"), the size of the load and how soiled the washing is.

26 оглавление

Оглавление

Панель управления

Close-up of a computer monitor with a blue button labeled 'A' and an arrow pointing to it (no readable text or symbols beyond label)

Simple diagram with three rectangular blocks, a plus sign, and a clock symbol above them (no text or labels)

Simple diagram with sun, moon, water, and clock icons (no text or labels)

Close-up of a hand holding a white appliance with a textured surface and arrows pointing to it (no visible text or symbols)

Hands holding white plastic objects with arrows indicating movement (no text or symbols)

Hand cleaning a tiled bathroom with a faucet and sink (no text or symbols visible)

Hand cleaning a wall-mounted sink with a hand holding the drain (no text or symbols visible)

Hands holding white plastic devices with arrows pointing to them (no text or symbols visible)

Close-up of a hand holding a white appliance with a mesh cover, showing mechanical components and arrows indicating parts of the device (no text or symbols visible)

Сливной фильтр

Close-up of a hand pressing down on a white appliance button with a black arrow pointing to the button (no text or symbols visible)

Close-up of a hand pressing down on a white surface with arrows indicating motion (no text or symbols visible)

Close-up of a hand inserting a plastic bag into a white appliance (no visible text or symbols)

Hand holding a small white object near a tiled wall, next to a metallic faucet (no text or symbols visible)

Close-up of a hand inserting a plastic bag into a white appliance (no visible text or symbols)

Hand holding a white appliance with a circular button and arrow indicating rotation (no text or symbols visible)

Hand pressing down a white plastic device with a curved arrow indicating motion (no text or symbols visible)

Close-up of hands holding a blue and white plastic bag inside a stainless steel kitchen sink (no text or symbols visible)

Hand holding a blue plastic bottle next to a metal faucet handle (no text or symbols visible)

Person pushing a white appliance with a curved arrow indicating rotation (no text or symbols visible)

Person pushing a white plastic bag with a curved arrow indicating motion (no text or symbols visible)

Person placing a plastic bag into a white cylindrical container (no text or symbols visible)

Person placing a white appliance into a clean drawer inside a white appliance (no text or symbols visible)

White trash bin with plastic bag being lifted by a hand, no visible text or symbols

Hand cleaning a white washing machine with a cloth (no text or symbols visible)

White plastic object with a red mark placed on a flat surface, no visible text or symbols

Close-up of hands holding a white plastic component with directional arrows indicating movement (no text or symbols visible)

Close-up of four electronic components with metallic and white fittings, arranged on a wooden surface (no text or symbols visible)

E c л и

выравнивание машины

Close-up of a hand using a tool to press or adjust a circular component, no visible text or symbols

Close-up of a hand adjusting a small mechanical component on a metal door (no visible text or symbols)

Close-up of a hand using a red power tool to clean or repair a wall-mounted component (no visible text or symbols)

Close-up of a hand inserting a small white plastic component into a metal panel (no text or symbols visible)

Hand using a tool to interact with a spiral-shaped object, no visible text or symbols

Close-up of a hand holding a metallic cylindrical object with a small circular component, no visible text or symbols

Подача воды

Close-up of a hand holding a metallic tool interacting with a circular object, no visible text or symbols

Close-up of a hand holding a small mechanical component inside a transparent enclosure (no visible text or symbols)

Close-up of a hand opening a white washing machine with a lid removed, showing liquid level and a black interior (no text or symbols visible)

Person installing or adjusting a mechanical component into a machine (no visible text or symbols)

Hand holding a small white plastic component inserted into a metallic housing (no visible text or symbols)

Close-up of a hand inserting a plastic component into a washing machine (no visible text or symbols)

Close-up of a mechanical component with metallic parts and a central circular dial (no visible text or symbols)

Hand holding a blue plastic bottle connected to a metal pipe fitting with a curved arrow indicating rotation (no text or symbols visible)

Close-up of a washing machine with blue tubing and a green hose, no visible text or symbols

Close-up of a hand pressing down on a white appliance component with an arrow indicating rotation (no text or symbols visible)

Для

перемещения

стиральной

машины

достаточно

Close-up of a hand holding a small electronic component with a circular outline (no visible text or symbols)

Close-up of hands adjusting a small electronic component on a black surface (no visible text or symbols)