Event Facade II - DJ Equipment Eliminator Lighting - Free user manual and instructions

Product Type	DMX LED Facade Panel
Brand	Eliminator Lighting
Model	Event Facade II
Dimensions (L x H x W)	1000 mm x 250 mm x 150 mm
Weight	4.5 kg
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	60 W maximum
LED Type	RGB (Red, Green, Blue) SMD LEDs
Number of LEDs	96 (32 per color)
Beam Angle	120 degrees
Color Modes	Static color, color fade, color jump, sound active
Control	DMX512, standalone, master/slave
DMX Channels	3, 4, 6, or 8 selectable
Connectivity	3-pin XLR input and output, IEC power input and output
Mounting	Floor standing or truss mountable with optional brackets
Housing Material	Aluminum and steel
IP Rating	IP20 (indoor use only)
Operating Temperature	0 to 40 degrees Celsius
Included Accessories	Power cord, user manual
Optional Accessories	Mounting bracket, carrying case
Safety Features	Overheat protection, safety cable attachment point
Maintenance	Clean with a soft dry cloth; avoid liquids
Repair	Contact authorized service center; no user-serviceable parts inside
Warranty	1 year limited warranty

Frequently Asked Questions - Event Facade II Eliminator Lighting

How do I set up the Event Facade II?

Place the unit on a stable surface or mount it securely. Connect power and DMX cables if used. Turn on the power switch.

What are the control modes?

The fixture supports DMX512 control (3, 4, 6, or 8 channels), standalone color modes, sound activation, and master/slave mode for multi-unit setups.

How do I select DMX channels?

Use the DIP switches on the back or the menu buttons (if available) to set the DMX address. Refer to the manual for switch combinations.

Can I use this outdoors?

No, the Event Facade II is rated IP20 and designed for indoor use only. Exposure to moisture can damage the unit.

How do I clean the unit?

Disconnect power and wipe the housing with a soft, dry cloth. Do not use water or chemical cleaners.

What power cord does it use?

It uses a standard IEC power cable (IEC C13 to plug type depending on region). Included in the box.

Can I link multiple units together?

Yes, using the DMX in/out connections. You can run multiple units in master/slave mode for synchronized effects.

What is the weight of the Event Facade II?

The unit weighs approximately 4.5 kg (10 lbs).

Does it come with mounting brackets?

Mounting brackets are sold separately. The unit has mounting points for optional brackets.

How do I reset the unit?

Turn off the power, wait 10 seconds, and turn it back on. If issues persist, check cables and DMX settings.

USER MANUAL Event Facade II Eliminator Lighting

Two white metal-framed panels with dark blue panels on the right side, no text or symbols visible.

Two dark and white rectangular panels with black borders, arranged side by side (no text or symbols visible)

EVENT FACADE II WH &

EVENT FACADE II BL

use guide

©2018 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and product names are trademarks or registered trademarks of their respective companies.

ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

ADJ PRODUCTS LLC World Headquarters

6122 S. Eastern Ave. | Los Angeles, CA 90040 USA

Tel: [phone] | Fax: [phone] | www.adj.com | [e-mail]

ADJ Supply Europe B.V.

Junostraat 2 | 6468 EW Kerkrade | Netherlands

Tel: [phone] | Fax: [phone] | www.americandj.eu | [e-mail]

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

Date	Document Version	Notes
04/27/18 1.3	Updated version.

CONTENTS

General Information	4
Limited Warranty	6
Setup Instructions	7
Washing Fabric/Scrim	8
Dimensional Drawings	8
Optional Accessories	9

GENERAL INFORMATION

INTRODUCTION

The ADJ® EVENT FACADE II WH™ and EVENT FACADE II BL™ is a great solution to professionally conceal your DJ equipment and create an elegant professional look at the same time. Perfect for anyone looking for a lightweight, portable, and fast set-up facade to enhance their image.

EVENT FACADE II WH comes with lightweight white color metal frames and EVENT FACADE II BL comes with lightweight black color metal frames. Both versions include black and white fabric/scrim panel sets. The stretchable fabric/scrim panels are easily removable for cleaning or can be interchanged for different black and white color panel combinations. Transportation and storage is also simple with the included zippered carry bag. No tools necessary to set-up or break-down, facade panels break down into individual pieces for easy transport.

UNPACKING

This product has been thoroughly tested and has been shipped in perfect condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your product for damage and be sure all accessories necessary to assemble the product have arrived intact. In the event damage has been found or parts are missing, please contact our customer support team for further instructions. Please do not return this product to your dealer without first contacting customer support at the number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.

BOX CONTENTS

(1) Zippered Transport Carrying Bag
(4) Metal Top Section Frames (WH = White Frames | BL = Black Frames)
(4) Metal Bottom Section Frames (WH = Frames | BL = Black Frames)
(4) White Fabric/Scrim Panels
(4) Black Fabric/Scrim Panels

CUSTOMER SUPPORT

ADJ® provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.adj.com for any comments or suggestions. For service related issue please contact ADJ.

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337

Fax: [phone]

E-mail: [e-mail]

ADJ GROUP SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: [phone]

Fax: [phone]

E-mail: [e-mail]

WARRANTY REGISTRATION

The EVENT FACADE II WH and EVENT FACADE II BL is covered by a 1 year (365 days) limited warranty. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the outside of the package will be refused and returned at customer's expense. You may obtain a R.A. number by contacting customer support.

LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty periods below). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner's responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product-please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, or for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual. D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer's and/or Dealer's sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

LIMITED WARRANTY PERIODS

Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)

Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)

LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)

NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product purchased within the United States.

StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)

ADJ DMX Controllers = 2 Year (730 Days)

American Audio Products = 1 Year (365 Days)

SETUP INSTRUCTIONS

1. Connect TOP and BOTTOM metal frame sections together by inserting BOTTOM section securely into the TOP section, making sure both sections have hook and loop strips on the same side and there are no gaps between the two sections. (see images below left and center)

Note: BOTTOM metal frame section has 2 rubber feet.

Diagram showing two blue upward arrows inside a white trapezoidal frame against a black background (no text or symbols)

Simple white trapezoidal frame with mounting feet against black background (no text or symbols)

Blank white rectangular sheet or panel against black background (no text or symbols)

1. Secure TOP and BOTTOM frame sections together by attaching fabric/scrim color panels to the hook and loop strips, starting at the TOP section and working towards the BOTTOM section, stretching fabric/scrim slightly as needed. (see image above right)
2. Repeat steps 1 and 2 above for remaining 3 metal frame sets. (4 total)
3. Connect completed facade panels together by aligning the TOP and BOTTOM hinges and inserting both rotation pins into the hinge sleeves. (See images below)

Exterior view of a modern office building (no signage)

①

Close-up of a white door with a black handle, no visible text or symbols

②

Close-up of a white cabinet or door with a black handle, against a plain background (no text or symbols visible)

③

WASHING FABRIC/SCRIM

To clean the fabric/scrim, remove from panel and hand wash in cold water using mild laundry soap.

Lay out on flat surface to air dry. If stains still exist, hand wash again and air dry.

DO NOT TWIST OR RING OUT SCRIM!

DO NOT HEAT DRY!

NEVER USE ALCOHOL, SOLVENTS, OR AMMONIA-BASED CLEANERS!

DIMENSIONAL DRAWINGS

OPTIONAL ACCESSORIES

ORDER CODE	ITEM
EVE400	(4) EVENT FACADE WHITE SCRIM (SCRIM ONLY)
EVE500	4) EVENT FACADE BLACK SCRIM (SCRIM ONLY)
EVENT BAG	EVENT FACADE CARRYING BAG (BAG ONLY)

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: [phone] / Fax: [phone]

Web: www.adj.com / E-mail: [e-mail]

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

The Netherlands

[e-mail] / www.adj.eu

Tel: [phone] / Fax: [phone]

Follow Us On:

facebook.com/americandj

twitter.com/americandj

youtube.com/adjighting