Trio Par LED RG - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free Trio Par LED RG Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Brand | Eliminator Lighting |
| Model | Trio Par LED RG |
| Light Source | 3 x 3W RGB LEDs |
| Beam Angle | 25 degrees |
| DMX Channels | 3-channel DMX |
| Control Modes | DMX, Sound Active, Auto, Master/Slave |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 15W |
| Housing Material | Aluminum and ABS plastic |
| Dimensions | 10 x 8 x 8 inches (25.4 x 20.3 x 20.3 cm) |
| Weight | 2.2 lbs (1 kg) |
| Cooling | Convection cooling |
| Mounting | Adjustable hanging bracket |
| Operating Temperature | -10 to 40 degrees Celsius |
| Cleaning and Maintenance | Wipe with a clean, dry cloth; avoid harsh chemicals |
| Safety Features | Class 1, CE certified |
| Accessories Included | Power cord, user manual |
| Repairability | Replaceable LED modules and DMX boards |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - Trio Par LED RG Eliminator Lighting
How do I connect the Eliminator Lighting Trio Par LED RG to a DMX controller?
Use a standard 3-pin DMX cable to connect the DMX input of the fixture to your controller. End the chain with a 120-ohm terminator to avoid signal reflections.
What is the beam angle of the Trio Par LED RG and how does it affect lighting?
The Trio Par LED RG features a 25-degree beam angle, providing a focused yet wide wash suitable for stage and architectural lighting.
How should I clean the LED par can?
Clean the housing and lens using a soft, dry cloth. Avoid water, cleaning solvents, and abrasive materials that can damage the lens coating.
Can the Trio Par LED RG be used outdoors?
This fixture is designed for indoor use only. Keep it away from moisture, rain, and extreme temperatures to prevent electrical damage.
How do I set the DMX address on the Trio Par LED RG?
Use the DMX address switches on the rear panel. Set the starting address according to your controller's channel assignment, ensuring it does not overlap with other fixtures.
What type of power cable does the fixture use?
The unit uses a standard IEC power cable with a grounded plug. Verify the input voltage (100-240V AC) matches your local mains.
What should I do if an LED module fails?
Contact qualified service personnel. The LED modules are replaceable; however, opening the housing yourself may void the warranty.
What are the physical dimensions and weight of the Trio Par LED RG?
The unit measures approximately 10 x 8 x 8 inches and weighs around 2.2 pounds, making it compact and easy to install.
How do I link multiple units for master/slave operation?
Set one unit as master and others as slave using the mode settings. Connect the master's DMX output to the slave's DMX input using standard DMX cables.
Is the Trio Par LED RG compatible with all DMX controllers?
Yes, it supports the USITT DMX-512 protocol, which is universally compatible with most DMX controllers and lighting consoles.
User questions about Trio Par LED RG Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Trio Par LED RG - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Trio Par LED RG by Eliminator Lighting.
USER MANUAL Trio Par LED RG Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : Trio Par LED RG
Category : Lighting