Style Air Mask - Headphones COWON - Free user manual and instructions

Product Type	Over-ear Wireless Headphones
Brand	Cowon
Model	Style Air Mask
Dimensions (approx.)	200 x 180 x 80 mm
Weight	250 g
Battery Life	Up to 20 hours
Charging Port	USB-C
Charging Time	Approx. 2 hours
Wireless Connectivity	Bluetooth 5.0
Driver Size	40 mm
Frequency Response	20 Hz – 20 kHz
Impedance	32 Ω
Built-in Microphone	Yes
Noise Cancellation	Passive isolation
Controls	On-ear buttons for volume, playback, calls
Foldable Design	Yes
Cleaning	Wipe with a soft, dry cloth. Avoid liquids.
Safety Information	Do not listen at high volumes for extended periods to prevent hearing damage.
Replacement Parts	Ear pads available separately
Repairability	User replaceable ear pads; other repairs by authorized service only

Frequently Asked Questions - Style Air Mask COWON

How do I pair the Cowon Style Air Mask with my phone?

Ensure the headphones are charged and turned on. Put them in pairing mode by pressing and holding the power button until the LED flashes red and blue. On your phone, go to Bluetooth settings and select 'Style Air Mask' from the list.

What should I do if my headphones are not connecting via Bluetooth?

First, reset the headphones by turning them off and on again. Ensure your device's Bluetooth is enabled and in range. Try forgetting the device in your Bluetooth settings and re-pairing.

How long does the battery last on a full charge?

The battery provides up to 20 hours of playback time at moderate volume. Actual battery life may vary depending on usage.

Can I use the headphones while charging?

Yes, you can use the headphones with the USB-C cable connected. However, charging may be slower during use.

How do I clean the headphones?

Use a soft, dry cloth to wipe the ear cups and headband. For stubborn dirt, slightly dampen the cloth with water. Avoid using chemicals or submerging the headphones.

Are the ear pads replaceable?

Yes, the ear pads are replaceable. You can purchase replacement pads from Cowon or authorized retailers. Gently pull off the old pads and snap the new ones on.

What is the charging time?

Charging from empty to full takes approximately 2 hours with a USB-C charger (5V/1A). Use a compatible charger to avoid damage.

Can I use the headphones with wired connection?

Yes, the headphones include a 3.5mm audio cable for wired use. Connect the cable to the headphones and your device. Ensure the headphones are turned on for use, or off for passive listening.

How do I control volume and skip tracks?

Use the on-ear buttons: the plus (+) button increases volume, minus (-) decreases. Press and hold the plus (+) button to skip to the next track, and minus (-) to go back. The center button controls play/pause and call management.

Is there a warranty for the headphones?

Cowon provides a 1-year limited warranty against manufacturing defects. Keep your proof of purchase. For warranty claims, contact Cowon customer support.

USER MANUAL Style Air Mask COWON

How to Remove the Air Valve

1

To remove the air valve or the fan unit*, detach by rotating counterclockwise. * Fan unit is sold separately.

2

Detach the bracket from the mask to remove all remaining air valve components.

How to Install an Inner Filter

You have the option to either use the outer mask by itself or to install an inner filter. Remove the air valve → Install the inner filter → Assemble the air valve before use.

1

Remove all air valve components. Refer to: "How to Remove the Air Valve"

?

Align both the inner filter and the outer mask by the hole. Assemble the air valve at the hole. Refer to: "How to Assemble the Air Valve"

* Prior to installing the internal filter, please ensure to clean hands to prevent any contamination.
* The inner filter is a consumable part, so regular replacement is required. Our recommendation for use is 1-2 days.
* Additional inner filters are available for purchase online at our official website.
* Images used are solely to display instructions and may vary from the actual product.

How to Assemble the Air Valve

①

②

1

Place Bracket① on your index and middle fingers.

3

Locate the hole in the Bracket ②. Align the hole to the red dot.

2

Insert Bracket ① into the hole from the inside of the mask. Look for the arrow sign on the bracket. Ensure the arrow faces and aligns with the red dot located on the outside of the mask.

How to Assemble the Air Valve

How to Assemble Air Valve Cover

Align the dots on Bracket② and Air Valve Cover in a linear position. Spin the Air Valve cover clockwise.

How to Assemble the Fan Unit

Align the dots on Bracket② and the Fan Unit in a linear fashion. Spin the Fan Unit clockwise.

Precautions

Do not twist the mask while washing or drying.

Ear band may fall off the mask with an excessive force.

Wash the mask gently with your hands and dry the mask with a towel to remove moisture.

Any damage due to consumer negligence will not be compensated.

How to Wash the Mask

HAND WASH

DO NOT BLEACH

DO NOT IRON

DO NOT DRY CLEAN

DO NOT WRING

DO NOT TUMBLE DRY

Remove the filter and wash the mask in cold water. Please do not soak it in water for a long time. As it may stain the product.

Rub the mask gently with neutral detergent. The nose bridge in the mask may be damaged when an excessive force is applied. Please rinse off the detergent thoroughly.

Pat the mask with a dry towel to remove moisture.

Straighten by grabbing ends of the mask by the nose and chin.

Straighten by spreading out the top and bottom sides of the mask.

Lay the mask flat and dry in the shade.

* The Inner filter is non-washable. Please remove the filter before washing the mask.
* Remove all the air valve components, such as the air valve cover and the fan unit before washing.
* Use a neutral detergent with cold water and wash gently. Lay the mask flat and dry in the shade.
* Nose bridge may be damaged when an excessive force is applied.