3E-210SS - External Hard Drive Enclosure Sven - Free user manual and instructions

Type	External Hard Drive Enclosure
Interface	USB 3.0 (backward compatible with USB 2.0)
Form Factor	2.5-inch SATA
Supported Drive Height	7mm, 9.5mm
Maximum Capacity Supported	Up to 2TB
Data Transfer Rate	Up to 5 Gbps (USB 3.0)
Material	Aluminum alloy with plastic ends
Dimensions (L x W x H)	130 x 80 x 15 mm
Weight	Approximately 100 g
Power Supply	USB bus-powered (no external adapter needed)
Operating System Compatibility	Windows 7/8/10/11, macOS, Linux
Functions	Plug and Play, hot-swappable, LED activity indicator
Safety Features	Overcurrent protection, surge protection
Maintenance and Cleaning	Wipe with a soft dry cloth; avoid liquids
Spare Parts and Repairability	No user-serviceable parts; contact support for issues
General Information	Includes USB cable; warranty 1 year

Frequently Asked Questions - 3E-210SS Sven

Does the Sven 3E-210SS require an external power adapter?

No, it is USB bus-powered. Just connect it to a USB port on your computer.

What size hard drive can I install?

It supports 2.5-inch SATA hard drives or SSDs with a height of 7mm or 9.5mm.

What is the maximum drive capacity supported?

It supports drives up to 2TB.

Is the enclosure compatible with USB 2.0?

Yes, it is backward compatible with USB 2.0, but speeds will be limited to USB 2.0 rates.

Does it work with macOS or Linux?

Yes, it is compatible with Windows, macOS, and Linux without additional drivers.

How do I install the hard drive?

Slide off the cover, insert the SATA drive into the connector, and close the enclosure. No tools required.

What is the LED indicator for?

The LED lights up when the enclosure is connected and blinks during data transfer.

Can I use this enclosure for gaming?

Yes, the USB 3.0 interface provides sufficient speed for gaming, especially with an SSD installed.

How do I clean the enclosure?

Wipe the exterior with a soft dry cloth. Do not use water or cleaning solvents.

What should I do if the drive is not recognized?

Check the USB connection, try a different cable or port, and ensure the drive is properly seated. If issues persist, contact Sven support.

USER MANUAL 3E-210SS Sven

Congratulations on your purchase of the Sven external HDD enclosure!

Please read this User's Manual before using the unit and retain this User's Manual in a safe place for future reference.

COPYRIGHT

© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).

This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information of this Manual is given on “as is” terms. The author and the publisher do not bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual.

UNPACKING

Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.

SAFETY PRECAUTIONS

• Do not put foreign objects inside the holes of the device.
• Protect the device from humidity, dust and heating.

• Do not use gasoline, alcohol or other solvents when cleaning, since they may damage the surface. Clean the device with dry soft cloth only.

• Do not perform repairs by yourself.

• For extra protection during a thunderstorm, disconnect the device from the USB port and switch off your computer.

PACKAGE CONTENTS

• Alluminium case – 1 pc
• USB cable - 1 pc
• Screwdriver - 1 pc
• Screw set - 1 set
• Bag - 1 pc
• User's Manual – 1 pc
• Warranty card – 1 pc

SPECIAL FEATURES

• Alluminium case for shock protection and heat removal
  • High-speed USB 3.0 interface, compatible with USB 2.0 and 1.1
• Easy installation
• Up to 10 times faster than USB 2.0, bit rate up to 5 Gbps
  • Hot Swap mode, Plug&Play
• For best performance, PC, peripherals, cables and software should all support USB 3.0
  • Maximum bit rate depends on HDD speed

SYSTEM REQUIREMENTS

• PC/laptop with a USB port
• OS: Windows XP/Vista/7/8

INSTALLATION AND OPERATION GUIDE Hardware Installation

• Open the case cover. Insert the disk tightly and close the cover (Fig.1).
• Connect the external HDD enclosure to your PC with the USB cable (included). The installation is complete (Fig. 2).

User's Manual

3E-210SS

Software Installation

- Software installation is not required for Windows XP/Vista/7/8 OS. During the first connection to a USB port, the system will detect the device and install the necessary drivers automatically. After the HDD is detected, a Safely Remove Device icon will appear on the taskbar in the bottom right corner of your screen.

Windows XP/Vista/7/8 Partitioning and Formatting

- To partition and format your HDD, please refer to relative documents. We strongly recommend that this should be done by qualified experts.

- If you still decide to do it yourself, connect your external HDD to your PC. Right click on the My Computer icon, select Manage, then Disc Management and select your external HDD for partitioning and formatting.

Attention! Please be careful in selecting the disk to be partitioned and formatted!

Line drawing of two hands holding cards (no text or symbols)

Fig. 1. Hardware installation diagram

Line drawing of a desktop computer with a cable and drive unit (no text or symbols)

Fig. 2. Connection

LED light

LED Light	Color	Status
Blue Light	Powered, but inactive
Blue Light (blinking)	Reading or writing data

TROUBLESHOOTING

In case of malfunction, make sure that your HDD is properly inserted into the external HDD enclosure, that the USB cable is connected to a PC or laptop USB port and the PC or laptop is on.

TECHNICAL SPECIFICATIONS

Parameter, measurement unit	Value
Form factor, inch	2.5
Interface	external – USB 2.0,internal – SATA
OS required	Windows XP/Vista/7/8
Cable length, m	0.8
Dimensions, mm	120 × 73 × 12
Weight (without HDD), g	114

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications are subject to change without notice due to improvement of SVEN production.

Technical support is on www.sven.fi

External HDD Enclosure

SVEN®

YOU WANT - WE CAN

Модель: 3E-210SS

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, N° 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN Scandinavia Ltd. Finland.

3E-210SS