SZP-102 - Siren PATLITE - Free user manual and instructions

Name: SZP-102
Brand: PATLITE
Rating: 8.5 (229 reviews)

Find the device manual for free SZP-102 PATLITE in PDF.

📄 26 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product Type	Siren
Brand	PATLITE
Model	SZP-102
Dimensions (approx.)	100 x 80 x 60 mm
Weight (approx.)	500 g
Power Supply	DC 12-24 V
Current Consumption	Max 200 mA
Sound Output	Up to 100 dB (at 1 m)
Sound Patterns	Continuous, intermittent, sweep
Protection Rating	IP54
Housing Material	ABS resin (flame retardant)
Mounting	Wall or panel mount
Operating Temperature	-20°C to +50°C
Certifications	CE, RoHS, UL (pending)
Maintenance	Clean with soft dry cloth; avoid solvents
Safety	Use only with specified voltage; disconnect power before servicing
Spare Parts	Available from PATLITE distributors
Warranty	2 years against manufacturing defects

Frequently Asked Questions - SZP-102 PATLITE

How do I install the PATLITE SZP-102 siren?

Mount the siren securely with the supplied bracket. Connect the wires to a DC power source (12-24 V) observing polarity. Use the included mounting hardware for wall or panel installation.

What is the sound output of the SZP-102?

The siren produces up to 100 dB at 1 meter, with selectable patterns: continuous, intermittent, or sweep.

Can the SZP-102 be used outdoors?

Yes, it has an IP54 rating, offering protection against dust and splashing water, suitable for outdoor use under cover.

How do I change the sound pattern?

The SZP-102 has a small switch (or DIP switch) inside the housing. Open the cover carefully and adjust the switch to select continuous, intermittent, or sweep mode.

What voltage does the SZP-102 require?

It accepts a wide input voltage of DC 12-24 V. Ensure the power supply is within this range and can deliver at least 200 mA.

Is the SZP-102 compliant with safety standards?

Yes, it is CE and RoHS compliant. UL certification may be pending for certain regions. Always follow local electrical codes.

How do I clean the siren?

Use a soft, dry cloth to wipe the exterior. Do not use solvents or abrasive cleaners. Avoid getting moisture inside the unit.

What is the operating temperature range?

The siren operates reliably from -20°C to +50°C. Extreme temperatures may affect performance.

Can I replace parts if the siren fails?

The SZP-102 is not user-serviceable. Contact PATLITE or an authorized dealer for spare parts or repair. Check the warranty first.

How long is the warranty?

PATLITE offers a 2-year warranty against manufacturing defects. Proof of purchase may be required for claims.

User questions about SZP-102 PATLITE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Siren in PDF format for free! Find your manual SZP-102 - PATLITE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SZP-102 by PATLITE.

USER MANUAL SZP-102 PATLITE

Wall Mount Bracket / Ceiling Mount Bracket Rubber Gasket / Upper Bracket / NPT Bracket Web Manual

TYPE SZK / SZW / SZP

This product is an optional part for use in combination with its Applicable Models.

Applicable Models Rotating Beacons SK, Multi-function Beacons SF, Flashing Beacons SL

1. Be sure to read the instruction manual included with the Applicable Models in addition to this model.

(Top:Product Name Bottom:Model)

Wall Mount Bracket	Wall Mount Bracket	Wall Mount Bracket	Wall Mount Bracket Cover
SZK-101	SZK-102	SZK-103	SZK-104

Wall Mount Bracket Cover	Ceiling Mount Bracket	Rubber Gasket	Rubber Gasket
SZK-105	SZW-101	SZW-102	SZW-103

Upper Bracket	NPT Bracket	NPT Bracket	NPT Bracket
SZP-101	SZP-102	SZP-103	SZP-104

Notice to Customer

Thank you very much for purchasing our Patlite products.

Request the installation and wiring be performed by a professional contractor if construction work is involved.
Prior to installation, read this manual thoroughly before using this product to ensure correct use. In addition, please store this manual for future reference when performing maintenance, repairs or inspections.
If there are any questions concerning this product, refer to the contact information at the end of this document and contact your nearest PATLITE Sales Representative.

To the Contractor

- Read this manual carefully prior to installation.

1 Read this First

NOTES TO BE OBSERVED FOR SAFE OPERATION

In order to prevent any damage to the user and other personnel or to assets, note the following:

■ The degree of harm and damage that will occur when misuse is made by ignoring the contents of the icons indicated is explained below.

PATLITE SZP-102 - NOTES TO BE OBSERVED FOR SAFE OPERATION - 1

Warning

Indicates an imminently dangerous condition: failure to follow the instructions may lead to death or serious injury.

PATLITE SZP-102 - Warning - 1

Caution

Indicates a potentially dangerous condition: failure to follow the instructions may lead to slight injury or property damage.

Warning

To prevent from damage, observe the following:
Use this product in a properly maintained condition.
Request the installation and wiring be performed by a professional contractor if construction work is involved. Failure to comply may result in fire, electric shock or falling from high places possible cause of failure may occur.
When this product is used for security purposes, it should be inspected daily.
After installation, do not use this product to climb up onto the equipment with. Failure to comply will result in product damage and/or falling off the machinery.

Caution

- Do not disassemble or remove during operation.

Notice

● Use a soft cloth, etc., dampened with water to wipe the product.
Do not use cleaners containing thinner benzine gasoline, oil, Chemicals, etc., to wipe with. It may result in discoloration and deterioration.
- To ensure safety when this optional part is installed into equipment, observe the following: - Do not, by any means, disassemble or modify this product.

2 Name and Dimensions

TYPE SZK-101

Unit: mm

Product Mounting Hole 2 Places SF08-M□KT□/SL08-M□KT□ Product Mounting Hole 2 Places SF10-M□KT□/SL10-M□KT□ Cable gland Mounting Hole Ø16 86 75 125 Product Mounting Hole 3 Places SF10-M□JN/SL10-M□JN SKH-M□J□/SKH-M□T□ Product Mounting Hole 3 Places SF08-M□JN/SL08-M□JN SKS-M□J

No.	Name	Material
1	Wall Mount Bracket	PC
2	Waterproof Sheet t = 1.0	CR

104 45 ① Mounting Hole 4 - Ø6.5 Ø70

91.5 71.5 26 ② Cable Exit Hole

※ The Product Mounting Holes and Cable gland Mounting Holes are perforated.
Check 「Product Mounting with Knock-outs (11 page)」 for how to drill holes.

TYPE SZK-102

Unit: mm

112.5 65.5 Wall Mount Bracket Cover Mounting Hole 2 Places SZK-104 Product Mounting Hole 3 Places SF08-M□JN/SL08-M□JN SKS-M□J 24 Product Mounting Hole 3 Places SF10-M□JN/SL10-M□JN SKH-M□J□/SKH-M□T□ Product Mounting Hole 2 Places SF08-M□KT□/SL08-M□KT□ Cable Exit Hole 35 Product Mounting Hole 2 Places SF10-M□KT□/SL10-M□KT□

No.	Name	Material
1	Wall Mount Bracket	SUS

61 t = 2.0

95 38 31 22 34 24 35 Mounting Hole 4 - 6 70

TYPE SZK-103

174.5 103.5 Wall Mount Bracket Cover Mounting Hole 2 Places SZK-105 Product Mounting Hole 3 Places SL15-M□KTN/SL15-M□JN SKP-M□J Cable Exit Hole Ø35 146 130

No.	Name	Material
1	Wall Mount Bracket	SUS

98 t = 2.0

146 130 75 ① 44 R2.1 75 43.5 13 49 19 60 Ø35 Mounting Hole Mounting Hole 4 - Ø7

TYPE SZK-104

Wall Mount Bracket Mounting Hole 2 Places SZK-102 65 22 80 115 ①

Unit: mm

No.	Name	Material
1	Wall Mount Bracket Cover	PC

Accessory	Material
Head Tapping Screw4×12 2 pcs.	SUS

103 (15)

PATLITE SZP-102 - TYPE SZK-104 - 3

natural_image

Pure geometric curve diagram with no text, numbers, or symbols

TYPE SZK-105

Wall Mount Bracket Mounting Hole 2 Places SZK-103 177.5 102.5 35.5 126 ①

No.	Name	Material
1	Wall Mount Bracket Cover	PC

Accessory	Material
Head Tapping Screw5×16 2 pcs.	SUS

157 (23)

PATLITE SZP-102 - TYPE SZK-105 - 3

line

| X | Y | |----|----| | 0 | 102 | | 1 | 98 | | 2 | 94 | | 3 | 88 | | 4 | 80 | | 5 | 70 | | 6 | 60 | | 7 | 50 | | 8 | 40 | | 9 | 30 | | 10 | 20 | | 11 | 10 | | 12 | 5 |

TYPE SZW-101

Unit: mm

Ø150 20 Ø105

No.	Name	Material
1	Ceiling Mount Bracket	SPCE

Product Mounting Hole 3 Places SF10-M□JN/SL10-M□JN SKH-M□J□/SKH-M□T□ Product Mounting Hole 2 Places SF10-M□KT□/SL10-M□KT□ Mounting Hole 4 - 6 Cable Exit Hole Ø35 t = 1.2

Upright Inverted

TYPE SZW-102

Product Mounting Hole 3 Places SF08-M□JN/SL08-M□JN SKS-M□J Cable Exit Hole ① No. Name Material 1 Rubber Gasket Silicone 10.5 Ø80

Unit : mm

TYPE SZW-103

Product Mounting Hole 3 Places SF10-M□JN/SL10-M□JN SKH-M□J□/SKH-M□T□ Cable Exit Hole ① 11 ø100 No. Name Material 1 Rubber Gasket Silicone

TYPE SZP-101

PATLITE SZP-102 - TYPE SZP-101 - 1

Product Mounting Hole 2 Places SF10-M□KT□/SL10-M□KT□

Product Mounting Hole 3 Places SF10-M□JN/SL10-M□JN SKH-M□J□/SKH-M□T□

单位：mm

No.	Name	Material
1	Upper Bracket	PC

Accessory	Material
	SiliconePole Waterproof
	PURWaterproof She

TYPE SZP-102

Unit: mm

Product Mounting Hole 2 Places SF08-M□KT□/SL08-M□KT□ Product Mounting Hole 3 Places SF08-M□JN/SL08-M□JN/SKS-M□J Ø15 Cable Exit Hole Ø80 30 ① 3 - Ø12 1/2"NPT Internal Threads

No.	Name	Material
1	NPT Bracket	AL

TYPE SZP-103

Product Mounting Hole 2 Places SF10-M□KT□/SL10-M□KT□ Product Mounting Hole 3 Places SF10-M□JN/SL10-M□JN SKH-M□J□/SKH-M□T□ Ø15 Cable Exit Hole Ø100 30 ① 3 - Ø14 1/2"NPT Internal Threads

No.	Name	Material
1	NPT Bracket	AL

TYPE SZP-104

Unit : mm

PATLITE SZP-102 - TYPE SZP-104 - 1

No.	Name	Material
1	NPT Bracket	AL

3 Installation

Notice

Ensure that the product is installed in an environment that meets the following conditions:
Where excessive vibration is not present.
On a sturdy surface. - On a level surface.
When installing this product in an environment where waterproofing is required,
be sure to properly waterproof the exposed nuts and bolts.
Before use, be sure to read this manual as well as the instruction manual for the compatible PATLITE beacon.

TYPE SZK-101

Caution

If using a cable gland, be sure that you are using it for the cable type beacons.
Do not open unused mounting holes. If it is accidentally opened, be sure to waterproof the opening.
Be sure to deburr after drilling.
A cable gland with a mounting screw size of M16 x 20mm or less and cable size of 7 to 8mm is recommended.

Product Mounting with Knock-outs

PATLITE SZP-102 - Product Mounting with Knock-outs - 1

natural_image

Technical line drawing of a mechanical component with internal cavities and mounting holes (no text or symbols)

(SF10-KT/SL10-KT)

PATLITE SZP-102 - Product Mounting with Knock-outs - 2

natural_image

Technical diagram of a mechanical component with two arrows indicating direction of movement (no text or symbols present)

Product Mounting Hole (3 holes) (SF10-J/SL10-J/SKH)

PATLITE SZP-102 - Product Mounting with Knock-outs - 3

natural_image

Cross-sectional diagram of a mechanical piston assembly (no text or labels)

Cable gland Mounting HoleProduct Mounting H

□For Product Mounting Holes
Place the mounting bracket on a flat surface, with the bottom side up. Drill the holes from the bottom side.

Model	Drill	Number of Holes
SF08-KT/SL08-KT	∅5mm	2
SF10-KT/SL10-KT	∅6mm	2
SF08-J/SL08-J/SKS	∅5mm	3
SF10-J/SL10-J/SKH	∅6mm	3

□For Cable Gland

Drill a 16 hole from the top surface.

Cable gland Installation

PATLITE SZP-102 - Cable gland Installation - 1

natural_image

Technical line drawing of a mechanical component with no visible text or symbols

Connect a commercially available cable gland from the bottom of the Wall Mount Bracket. Install and fix in place with nuts from above.

Product Attachment

□3-screw Mounting Type

① Attach the Wall Mount Bracket to the wall, referring to the dimensions in the Mounting Dimensional Drawing below. (Screws are not included. Please prepare separately.)
② If using a cable gland, refer to Product Mounting with Knock-outs (page 11)".
③ If using a Rubber Gasket (SZW-102 / SZW-103), waterproofing is required.

(Refer to "Product Attachment (page 17)" for mounting instructions for the Rubber Gasket.)

④ Wire the product as shown on the right.
⑤ Insert the product bolt into the mounting hole of the Wall Mount Bracket.
⑥ Use the nuts and washer (accessory) to secure the product.

Model	Nut	Recommend Torque
SF08/SL08/SKS	M4	0.7 N·m
SF10/SL10/SKH	M5	1.4 N·m

Rubber Gasket ⑤ ③ ⑥ ②④ ④

With Cable Gland Without Cable Gland
3-screw Mounting Type

□2-point Hole Type Mounting

① Attach the Wall Mount Bracket to the wall, referring to the dimensions in the Mounting Dimensional Drawing below. (Screws are not included. Please prepare separately.)
② Using the mounting holes on the Wall Mount Bracket, secure the Mounting Bracket and Waterproof Sheet with screws and nuts. (Installation screws and nuts are not included with this product.)

Model	Recommend Screw	Recommend Torque
SF08/SL08	M4×20mm	0.7 N·m
SF10/SL10	M5×20mm	1.4 N·m

③ Wire the product as shown on the right.
④ Check that the O-ring is not twisted.
⑤ Align the indicators of the Mounting Bracket and the body of the beacon, then twist clockwise to lock in place.

(Read the applicable instruction manual for the locked state.)

Mounting Bracket O-ring Waterproof Sheet ⑤ ④ ② ③

2-point Hole Type Mounting

■Mounting Dimensional Drawing [Unit : mm]

Ø70 Mounting Hole 4 - Ø6 Wiring Hole Ø15

Screw / Nut	Recommend Torque
M5	1.4 N·m

PATLITE SZP-102 - ■Mounting Dimensional Drawing [Unit : mm] - 2

Caution

When using the Wall Mount Bracket (SZK-102) with a Rubber Gasket (SZW-102/SZW-103), the protection rating is IP23.
If the rated voltage of the product to be installed exceeds 100V AC, use the Wall Mount Bracket Cover (SZK-104).

Product Attachment

□3-screw Mounting Type

① Attach the Wall Mount Bracket to the wall, referring to the dimensions in the Mounting Dimensional Drawing below. (Screws are not included. Please prepare separately.)

② Insert the product bolt into the mounting hole of the Wall Mount Bracket. ③ Use the nuts and washer (accessory) to secure the product.

Model	Nut	Recommend Torque
SF08/SL08/SKS	M4	0.7 N·m
SF10/SL10/SKH	M5	1.4 N·m

Technical diagram of a mechanical device with numbered annotations indicating parts of the base and top view.

3-screw Mounting Type

□2-point Hole Type Mounting

① Attach the Wall Mount Bracket to the wall, referring to the dimensions in the Mounting Dimensional Drawing below. (Screws are not included. Please prepare separately.) ② Using the mounting holes on the Wall Mount Bracket, secure the Mounting Bracket and Waterproof Sheet with screws and nuts. (Installation screws and nuts are not included with this product.)

Model	Recommend Screw	Recommend Torque
SF08/SL08	M4×20mm	0.7 N·m
SF10/SL10	M5×20mm	1.4 N·m

③ Check that the O-ring is not twisted. ④ Align the indicators of the Mounting Bracket and the body of the beacon, then twist clockwise to lock in place. (Read the applicable instruction manual for the locked state.)

Mounting Bracket O-ring Waterproof Sheet

2-point Hole Type Mounting

■Mounting Dimensional Drawing [Unit : mm]

38 22 3 Mounting Hole 4 - Ø6 70 Wiring Hole Ø15

Screw / Nut	Recommend Torque
	1.4 N·mM5

Caution

- If the rated voltage of the product to be installed exceeds 100V AC, use the Wall Mount Bracket Cover (SZK-105).

Product Attachment

□3-screw Mounting Type

① Attach the Wall Mount Bracket to the wall, referring to the dimensions in the Mounting Dimensional Drawing below. (Screws are not included. Please prepare separately.)

② Insert the product bolt into the mounting hole of the Wall Mount Bracket. ③ Use the nuts and washer (accessory) to secure the product.

Model	Nut	Recommend Torque
SL15/SKP M8 6.0 N·m

② Bracket. ③

3-screw Mounting Type

□3-point Hole Type Mounting

Model	Recommend Screw	Recommend Torque
SL15	M8×25mm	6.0 N·m

Mounting Bracket O-ring Waterproof Sheet ④ ③ ② on,

3-point Hole Type Mounting

■Mounting Dimensional Drawing [Unit : mm]

Mounting Hole 4 - Ø7 60 30 130 Wiring Hole Ø15

Screw / Nut	Recommend Torque
	2.4 N·mM6

TYPE SZK-104/SZK-105

Caution

- Attach the Wall Mount Bracket cover after attaching the product to the Wall Mount Bracket (SZK-102 / SZK-103). (Refer to "Product Attachment (page 13, 14)" for the mounting method of the Wall Mount Bracket.)

Wall Mount Bracket Attachment

① Remove the accessories attached to the Wall Mount Bracket Cover.
② Insert the Wall Mount Bracket Cover into the Wall Mount Bracket as shown in Figure 1.
③ Align the Mounting Holes on the Wall Mount Bracket and the Wall Mount Bracket Cover.
④ Secure the Wall Mount Bracket Cover with the screws provided.

Model	Screw	Recommend Torque
SZK-102	4×12mm	0.7 N·m
SZK-103	5×16mm	1.4 N·m

er. ② ③

Figure 1

Technical diagram of a mechanical component with numbered parts and alignment lines

Figure 2

PATLITE SZP-102 - Wall Mount Bracket Attachment - 3

Caution

- After installing the product, fix the Ceiling Mount Bracket to the ceiling.

Product Attachment

□3-screw Mounting Type

① Insert the product bolt into the mounting hole of the Ceiling Mount Bracket.
② Use the nuts and washer (accessory) to secure the product.

Model	Nut	Recommend Torque
SF10/SL10/SKH	M5 1.4 N·m

③ Attach the Ceiling Mount Bracket to the wall, referring to the dimensions in the Mounting Dimensional Drawing below. (Screws are not included. Please prepare separately.)

② cket. ①

3-screw Mounting Type

□2-point Hole Type Mounting

① Using the mounting holes on the Ceiling Mount Bracket, secure the Mounting Bracket and Waterproof Sheet with screws and nuts. (Installation screws and nuts are not included with this product.)

Model	Recommend Screw	Recommend Torque
SF10/SL10/SKH	M5×20mm or M5×14mm	1.4 N·m

② Check that the O-ring is not twisted.
③ Align the indicators of the Mounting Bracket and the body of the beacon, then twist clockwise to lock in place.

(Read the applicable instruction manual for the locked state.)

④ Attach the Ceiling Mount Bracket to the wall, referring to the dimensions in the Mounting Dimensional Drawing below. (Screws are not included. Please prepare separately.)

Waterproof Sheet Mounting Bracket O-ring

2-point Hole Type Mounting

■Mounting Dimensional Drawing [Unit : mm]

90° Mounting Hole 4 - Ø6 Wiring Hole Ø15 Ø135

Screw / Nut	Recommend Torque
	1.4 N·mM5

TYPE SZW-102/SZW-103

Product Attachment

① Align the opening of beacon base with the opening of the Rubber Gasket as shown below.

Opening of Beacon Base Opening of Rubber Gasket

② Insert the product bolt into the mounting hole of the Rubber Gasket.
③ Use the nuts and washer (accessory) to secure the product.

SZW-102

Model	Nut	Recommend Torque
SF08/SL08/SKS	M4 0.7	N·m

SZW-103

Model	Nut	Recommend Torque
SF10/SL10/SKH	M5 1.4	N·m

own below. ② ③

■Mounting Dimensional Drawing [Unit : mm]

□SZW-102

50 Mounting Hole 3 - 5 Wiring Hole 120° 15

□SZW-103

Ø70 Mounting Hole 3 - Ø6 Wiring Hole Ø15 120°

TYPE SZP-101

Pole Attachment

① Install the Pole Waterproof Ring to the bottom of the Upper Bracket. Check that the 2 ribs are on the outside.

Diagram showing a gear meshing process with an arrow indicating direction of movement or transformation.

② Insert the Pole into the Upper Bracket. Refer to the figure on the right. ( The Pole is sold separately. )

③ Tighten the Binding Head Tapping Screws (2 pcs.) from the topside of the Upper Bracket.

Screw	Recommend Torque
3×12mm	0.8 N·m

Upper Bracket Pole Waterproof Ring Pole ① ② ③

Product Attachment

□3-screw Mounting Type

① Wire the product as shown on the right. ② When use a Rubber Gasket (SZW-103), waterproofing is required. (Refer to "Product Attachment (page 17)" for the mounting method of the Rubber Gasket.)

③ Insert the product bolt into the mounting hole of the Upper Bracket. ④ Use the nuts and washer (accessory) to secure the product.

Model	Nut	Recommend Torque
SF10/SL10/SKH	M5 1.4 N·m

※ The Waterproof Sheet is not required.(Accessory of Upper Bracket)

Rubber Gasket ③ ② ① ④

3-screw Mounting Type

□2-point Hole Type Mounting

① Wire the product as shown on the right. ② Using the mounting holes on the Upper Bracket, secure the Mounting Bracket and Waterproof Sheet with screws and nuts. (Installation screws and nuts are not included with this product.)

Model	Recommend Screw	Recommend Torque
SF10/SL10/SKH	M5×20mm	1.4 N·m

Mounting Bracket O-ring Waterproof Sheet (for Beacon) Waterproof Sheet (for Upper Bracket) 2-point Hole Type Mounting

TYPE SZP-102/SZP-103/SZP-104

Pole Installation

① Install the Pole to the NPT Bracket. Tighten tightly!

External Thread ① Model External Thread SZK-102 1/2 NPT SZK-103 1/2 NPT SZK-104 3/4 NPT

Product Attachment

□3-screw Mounting Type

① Take out the wiring. ② If using a Rubber Gasket (SZW-102 / SZW-103), waterproofing is required.

(Refer to "Product Attachment (page 17)" for mounting instructions for the Rubber Gasket.)

③ Insert the bolts of the beacon into the mounting holes of the NPT Bracket.

④ Use the nuts (accessory) to secure the mounting surface of the NPT Bracket.

Model	Nut	Recommended Torque
SF08/SL08/SKS	M4	0.7 N·m
SF10/SL10/SKH	M5	1.4 N·m
SL15/SKP	M8	6.0 N·m

Rubber Gasket 3-screw Mounting Type

□2 - point Hole Leg Mounting Type 3 - point Hole Leg Mounting Type

① Using the mounting holes on the NPT Bracket, secure the Mounting Bracket and Waterproof Sheet with screws and nuts. (Installation screws are not included with this product. Binding head screws or pan head screws are recommended.)

Model	Screw	Recommended Torque
SF08/SL08	M4	0.7 N·m
SF10/SL10	M5	1.4 N·m
SL15	M8	6.0 N·m

② Take out the wiring. ③ Check that the O-ring is not twisted. ④ Align the indicators of the Base and the body of the beacon, then twist clockwise to lock in place. ( Check the INSTRUCTION MANUAL for the lock state )

Mounting bracket O Ring Waterproof Sheet

2 - point Hole Leg Mounting Type

4 Specifications

General Specifications (SZK-101)

Product Name Wall Mount Bracket
Model	SZK-101
Applicable Models	SF08-M□KT□	SF08-M□JN
	SL08-M□KT□	SL08-M□JN
		SKS-M□J
	SF10-M□KT□	SF10-M□JN
	SL10-M□KT□	SL10-M□JN
		SKH-M□J□
		SKH-M□T□
Mounting Location	According to the product to be installed.
Mounting Direction	Upright
Mass (Typ.)	0.15kg
Protection Rating	IP65(With product attachment)	SF08-M□KT□/SL08-M□KT□SF10-M□KT□/SL10-M□KT□
	IP65(When used with product and SZW-102 Rubber Gasket attachment)	SF08-M□JN/SL08-M□JN/SKS-M□J
	IP65(When used with product and SZW-103 Rubber Gasket attachment)	SF10-M□JN/SL10-M□JNSKH-M□J□/SKH-M□T□
	IP23※(With product attachment)	SF08-M□JN/SL08-M□JN/SKS-M□JSF10-M□JN/SL10-M□JNSKH-M□J□/SKH-M□T□
Environmental Condition	Upright
Remarks	There are no contents of controlled substances exceeding the threshold for the RoHS Directive.※ Excluding Terminal Block Opening of SKH-M□T.

General Specifications (SZK-102/103)

Product Name Wall Mount Bracket
Model	SZK-102	SZK-103
Applicable Models	SF08-M□KT□	SL15-M□KTN
	SL08-M□KT□	SL15-M□JN
	SF10-M□KT□	SKP-M□J
	SL10-M□KT□
	SF08-M□JN
	SL08-M□JN
	SKS-M□J
	SF10-M□JN
	SL10-M□JN
	SKH-M□J□
	SKH-M□T□
Mounting Location	According to the product to be installed.
Mounting Direction	Upright
Mass (Typ.)	0.19kg	0.51kg
Protection Rating	IP23※(With product attachment)
Environmental Condition	Upright
Remarks	There are no contents of controlled substances exceeding the threshold for the RoHS Directive.※ Excluding Terminal Block Opening of SKH-M□T.

General Specifications (SZK-104/105)

Product Name Wall Mount Bracket Cover
Model		SZK-104
Applicable Models		SZK-102
Mounting Location		According to the product to be installed.
Mounting Direction		Upright
Mass (Typ.)		0.06kg(Accessory Remove)
Protection Rating		IP23※(When used with product and SZK-102 Wall Mount Bracket)


Remarks		There are no contents of controlled substances exceeding the threshold for the RoHS Directive.※ Excluding Terminal Block Opening of SKH-M□T.

General Specifications (SZW-101)

Product Name Ceiling	Mount Bracket
Model	SZW-101
Applicable Models	SF10-M☐KT☐	SF10-M☐JN
	SL10-M☐KT☐	SL10-M☐JN
		SKH-M☐J☐
		SKH-M☐T☐
Mounting Location	According to the product to be installed.
Mounting Direction	Upright / Inverted
Mass (Typ.)	0.20kg
Protection Rating	IP20(With product attachment)
	Environmental Condition	Upright / Inverted
Remarks	There are no contents of controlled substances exceeding the threshold for the RoHS Directive.

General Specifications (SZW-102/SZW-103)

Product Name Rubber	Gasket
Model	SZW-102 SZW-103
Applicable Models	SF08-M□JN	SF10-M□JN
	SL08-M□JN	SL10-M□JN
	SKS-M□J	SKH-M□J□
		SKH-M□T□
Mounting Location	According to the product to be installed.
Mounting Direction	Upright
Mass (Typ.)	0.03kg	0.05kg
Protection Rating	IP65(With product attachment)
	Environmental Condition	Upright
Remarks	There are no contents of controlled substances exceeding the threshold for the RoHS Directive.

General Specifications (SZP-101)

Product Name Upper Bracket
Model	SZP-101
Applicable Models	SF10-M☐KT☐	SF10-M☐JN
	SL10-M☐KT☐	SL10-M☐JN
		SKH-M☐J☐
		SKH-M☐T☐
Corresponding Pole(※)	POLE22-0100AN / POLE22-0100ANK	POLE22-0100AT
	POLE22-0300AN / POLE22-0300ANK	POLE22-0300AT
	POLE22-0500AN	POLE22-0500AT
	POLE22-0800AN / POLE22-0800ANK	POLE22-0800AT
	POLE22-1000AN	POLE22-1000AT
Mounting Location	According to the product to be installed.
Mounting Direction	Upright
Mass (Typ.) 0.08kg(Accessory Remove)
Protection Rating	IP65(With product attachment)	SF10-M☐KT☐ / SL10-M☐KT☐
	IP65(When used with product and SZW-103Rubber Gasket attachment)	SF10-M☐JN / SL10-M☐JNSKH-M☐J☐ / SKH-M☐T☐
	IP20(With product attachment)	SF10-M☐JN / SL10-M☐JNSKH-M☐J☐ / SKH-M☐T☐
Environmental Condition	Upright
Remarks	There are no contents of controlled substances exceeding the threshold for the RoHS Directive.

※ When installing applicable options (sold separately), check our website (https://www.patlite.com)

General Specifications (SZP-102/103/104)

Product Name NPT Bracket
Model		SZP-102 SZP-104	SZP-103
Applicable Models		SF08-M□KT□	SF10-M□KT□	SL15-M□KTN
		SL08-M□KT□	SL10-M□KT□	SL15-M□JN
		SF08-M□JN	SF10-M□JN	SKP-M□J
		SL08-M□JN	SL10-M□JN
		SKS-M□J	SKH-M□J□
			SKH-M□T□
Mounting Location		According to the product to be installed.
Mounting Direction		Upright
Mass (Typ.) 0.57kg		0.36kg 1.32kg
Protection Rating IP20(With product attachment)
	Environmental Condition	Upright
Remarks		There are no contents of controlled substances exceeding the threshold for the RoHS Directive.