WDBACW0020HBK - External hard drive WESTERN DIGITAL - Free user manual and instructions

USER MANUAL WDBACW0020HBK WESTERN DIGITAL

Simple line drawing of a rectangular device with a small 'WD' logo on the side (no text or symbols on the body)

WD Service and Support

Should you encounter any problem, please give us an opportunity to address it before returning this product. Most technical support questions can be answered through our knowledge base or e-mail support service at support.wdc.com. If the answer is not available or if you prefer, please contact WD ^® at the best telephone number shown below.

Your product includes 30 days of free telephone support during the warranty period. This 30-day period starts on the date of your first telephone contact with WD Technical Support. E-mail support is free for the entire warranty period and our extensive knowledge base is available 24/7. To help us keep you informed of new features and services, remember to register your product online at http://register.wdc.com.

Accessing Online Support

Visit our product support website at support.wdc.com and choose from these topics:

• Downloads—Download drivers, software, and updates for your WD product.
• Registration—Register your WD product to get the latest updates and special offers.
• Warranty & RMA Services—Get warranty, product replacement (RMA), RMA status, and data recovery information.
• Knowledge Base—Search by keyword, phrase, or answer ID.
• Installation—Get online installation help for your WD product or software.

Contacting WD Technical Support

When contacting WD for support, have your WD product serial number, system hardware, and system software versions available.

North America Asia Pacific

English	800.ASK.4WDC(800.275.4932) China 800 820 6682/[phone]
Spanish	800.832.4778	Hong Kong	[phone]
		India	1 800 11 9393 (MNTL)/1 800 200 5789 (Reliance)011 26384700 (Pilot Line)
Europe (toll free)*	00800 ASK4 WDEU(00800 27549338)	Indonesia	[phone]
		Japan	00 531 650442
		Korea	02 703 6550
Europe	[phone]	Malaysia	[phone]/1 800 88 1908/[phone]
Middle East	[phone]	Philippines	1 800 1441 0159
Africa	[phone]	Singapore	[phone]/[phone]/[phone]
		Taiwan	[phone]/[phone]

* Toll free number is available in the following countries: Austria, Belgium, Denmark, France, Germany, Ireland, Italy, Netherlands, Norway, Spain, Sweden, Switzerland, United Kingdom.

Table of Contents

WD Service and Support .... ii

Accessing Online Support .... ii

Contacting WD Technical Support....ii

1 About Your WD Drive .... 1

Features 1

Kit Contents 2

Optional Accessories 2

Operating System Compatibility 3

Disk Drive Format....3

Physical Description....3

Power/Activity LED....4

Power Button 4

USB 3.0 Interface....4

Kensington ^® Security Slot 5

Registering the Drive 5

Handling Precautions 5

2 Connecting the Drive and Getting Started 6

Connecting the Drive 6

Getting Started with the WD SmartWare Software 8

WD SmartWare Overview....12

WD SmartWare Home Screen 13

Drive Management Home Screen 14

Viewing the Info/Online Help Topics 14

Getting Started Without the WD SmartWare Software.... 15

3 Backing Up Your Computer Files 16

About Backing Up Your Computer Files 16

Backing It All Up....18

Advanced Backup Capabilities.... 19

Selecting Specific Files to Back Up....19

Changing the Backup Software Settings....20

4 Retrieving Backed Up Files 23

About Retrieving Files....23

Retrieving a File 23

Retrieving a Folder 26

Retrieving an Earlier Version of a File or Deleted Files 26

Retrieving All Your Files 26

5 Locking and Unlocking the Drive 27

Password Protecting the Drive....27

Unlocking the Drive 28

Unlocking the Drive with the WD SmartWare Software 29

Unlocking the Drive Without the WD SmartWare Software 29

Changing Your Password....30

Turning Off the Drive Lock Feature. 31

6 Managing and Customizing Your Drive 32

Using the WD SmartWare Icon.... 32

Opening the WD SmartWare Software 32

Checking Drive Status 32

Monitoring Icon Alerts. 33

Safely Disconnecting the Drive.... 33

Using the WD SmartWare Icon. 33

Using the Drive Power Button 33

Customizing Your Software Settings 34

Specifying a Different Retrieve Folder 34

Setting the Preferences Option 35

Customizing Your Drive Settings 35

Registering the Drive 37

Setting the Drive Sleep Timer....37

Erasing the Drive 38

Enabling the Backup and Retrieve Functions 40

Uninstalling the WD SmartWare Software 40

Uninstalling on Windows XP....40

Uninstalling on Windows Vista or Windows 7 41

Restoring the WD SmartWare Software and Disk Image 41

7 Checking Drive Health 42

8 Using the Drive with a Mac 44

Reformatting the Drive 44

Restoring the WD SmartWare Software and Disk Image 44

Connecting the Drive and Getting Started 44

Enhancing Performance with WD +TURBO 45

Installing the WD SmartWare Software 47

The WD SmartWare Home Screen 49

Using the WD SmartWare Icon.... 50

Opening the WD SmartWare Software 50

Checking Drive Status 51

Safely Dismounting the Drive 52

Using the WD SmartWare Icon. 52

Using the My Book Icon....53

Using the Drive Power Button 53

Unlocking the Drive 53

Unlocking the Drive with the WD SmartWare Software 53

Unlocking the Drive Without the WD SmartWare Software 55

Uninstalling WD SmartWare Software 56

9 Troubleshooting 57

Installing, Partitioning, and Formatting the Drive .... 57

Frequently Asked Questions....57

A Installing the SES Driver.... 59

Installing on Windows XP Computers 59

Installing the Driver Automatically 59

Installing the Driver Manually 61

Installing on Windows Vista Computers 63

Installing the Driver Automatically 63

Installing the Driver Manually 64

Installing on Windows 7 Computers. 66

B Compliance and Warranty Information....68

Regulatory Compliance 68

FCC Class B Information 68

ICES/NMB-003 Compliance. 68

Safety Compliance....68

CE Compliance For Europe 68

GS Mark (Germany only) 68

KCC Notice (Republic of Korea only) 69

Environmental Compliance (China). 69

Warranty Information 69

Obtaining Service....69

Limited Warranty 70

Index....71

About Your WD Drive

Welcome to your My Book ^® Essential external hard drive, an elegant, high-capacity storage solution for all the chapters of your digital life. Our latest edition features visual, easy-to-use, automatic, continuous backup software and drive lock security protection.

WD's best-selling My Book Essential USB external hard drive features WD SmartWare software that backs up your data automatically and continuously, shows your backup as it happens, and brings back lost files effortlessly.

This chapter includes the following topics:

Features

Kit Contents

Optional Accessories

Operating System Compatibility

Disk Drive Format

Physical Description

Registering the Drive

Handling Precautions

Features

Major features of the My Book Essential drive include:

Smaller, sleeker, more streamlined design—We've made these award-winning drives even smaller, sleeker, and more elegant. As always, the book-like shape takes up less space on your desk and allows two or more My Book drives to nestle neatly together like volumes on a shelf.

WD SmartWare™ software—An easy-to-use backup solution that gives you the power to:

• Protect your data automatically—Relax! Your data is secure. Automatic, continuous backup will instantly make a second copy whenever you add or change a file.
• See your backup as it happens—Seeing is believing. Visual backup organizes and displays your content into categories and shows the progress of your backup.
• Bring back lost files effortlessly—Retrieve your valuable data to its original location whether you've lost all your data, deleted a file, or just overwritten an important file.
• Take control—Customize your backup, set drive security, run diagnostics, manage the power settings, and more from the WD SmartWare control center.
• Drive lock—Gain peace of mind knowing that your data is protected from unauthorized access or theft with password protection and 256-bit hardware-based encryption.

USB 3.0 interface—A simple connection that offers convenience and compatibility among multiple computers.

Power miser—My Book external drives are designed to save energy. WD GreenPower Technology™ lowers internal drive power consumption by up to 30%, a sleep mode reduces power during idle times, and a power-saving feature turns the drive on and off with your computer.

Planet friendly—We designed a small box from recycled materials to minimize waste. We encourage you to recycle it.

Ready to plug-and-play with Windows Computers—NTFS-formatted for compatibility with all updated Windows operating systems.

Support for multiple devices—One installation of the software supports up to three WD drives (My Book or My Passport drives with WD SmartWare software).

Important: For the latest WD product information and news, visit our website at www.westerndigital.com. For the latest software, firmware, and product documentation and information, go to http://products.wdc.com/updates.

Kit Contents

As shown in Figure 1, your My Book Essential disk drive kit includes the following:

• My Book Essential external hard drive
• WD SmartWare software (included on the drive)
- USB cable
- AC adapter
- Quick Install Guide

USB Cable

Line drawing of a cable and connector device (no text or symbols)

AC Adapter

Line drawing of a white rectangular electronic device with a textured top and base (no text or symbols)

My Book Essential Drive

Quick Install Guide
Figure 1. My Book Drive Kit Components

Optional Accessories

For information about optional accessories for this product, visit:

US	www.shopwd.com or www.wdstore.com
Canada	www.shopwd.ca or www.wdstore.ca
Europe	www.shopwd.eu or www.wdstore.eu
All others Contact WD Technical Support in your region. For a list of Technical Support contacts, visitsupport.wdc.comand see Knowledge Base Answer ID 1048.

Operating System Compatibility

Your My Book Essential drive and the WD SmartWare software are compatible with the following operating systems:

Windows®

- Windows XP

- Windows Vista®

- Windows 7

Mac® OS X®

- Leopard®

- Snow Leopard ^TM

Compatibility can vary, depending on hardware configuration and operating system.

For highest performance and reliability, always install the latest updates and service pack (SP). For Windows computers, go to the Start menu and select Windows Update. For Mac computers, go to the Apple menu and select Software Update.

Disk Drive Format

Your My Book Essential drive is preformatted as a single NTFS partition for compatibility with all updated Windows operating systems. If you want to use the drive with a Mac computer, see “Reformatting the Drive” on page 44 and “Troubleshooting” on page 57.

Physical Description

As shown in Figure 2 and Figure 3 on page 4, the My Book Essential drive has:

• A power/activity indicator on the front
• The power connector and button, interface port, and a security slot on the back

Power/Activity LED

Figure 2. Front of the My Book Essential Drive

Power Button Kensington® Security Slot USB 3.0 Power Connector 12VDC

Figure 3. Back of the My Book Essential Drive

Power/Activity LED

The power/activity LED shows the drive's power state and activity as follows:

LED Appearance Power State/Activity
On steady Idle
Fast flashing, approximately 3 times per second Activity
Slow flashing, approximately every 2.5 seconds System standby

Power Button

Use the power button to safely power down the drive and avoid data loss or damage to the drive. The power button only works when the WD SmartWare software is installed on your computer.

Note: If you disconnect the drive after using the power button to turn it off, when you reconnect it to your running computer, the drive automatically powers on. If you leave the drive connected to your computer after using the power button to turn it off, you must press the power button again to turn it back on.

USB 3.0 Interface

Super-Speed USB 3.0 supports data transfer rates up to 5 Gb/s. USB 3.0 is backward-compatible with USB 2.0 and USB 1.1. Connection to a USB 2.0 or USB 1.1 port transfers data at the port speed:

• USB 2.0—up to 480 Mb/s

• USB 1.1—up to 12 Mb/s

Kensington® Security Slot

For drive security, the Kensington security slot accepts a standard Kensington security cable (sold separately). For more information about the Kensington security slot and available products, visit www.kensington.com.

Registering the Drive

Always register your My Book Essential drive to get the latest updates and special offers. You can easily register your drive using the WD SmartWare software, as described in “Registering the Drive” on page 37. Another way is to register online at register.wdc.com.

Handling Precautions

WD products are precision instruments and must be handled with care during unpacking and installation. Drives may be damaged by rough handling, shock, or vibration. Always observe the following precautions when unpacking and installing your external storage product:

• Do not drop or jolt the drive.
• Do not move the drive during activity.
• Do not use this product as a portable drive.

- To allow proper ventilation, do not block any of the drive enclosure's air slots.

2

Connecting the Drive and Getting Started

This chapter provides instructions for connecting the drive to your computer and installing WD SmartWare software. It includes the following topics:

Connecting the Drive

Getting Started with the WD SmartWare Software

Getting Started Without the WD SmartWare Software

Connecting the Drive

To connect the My Book drive to your Windows computer:

1. Depending on your region, if required, change the power adapter as follows:

US/JA/TW EU/KO UK CH AU/NZ

Installing

US/JA/TW EU/KO UK CH AU/NZ

Installing
Removing

1. Turn on your computer.
2. Connect the My Book drive as shown in Figure 4.

Diagram showing connections between a power outlet, server tower, and computer tower with labeled components

Figure 4. Connecting the My Book Drive

Note: If you have reformatted the drive for use on a Mac computer, skip the rest of this procedure and see "Connecting the Drive and Getting Started" on page 44 instead.

1. Verify that the new My Book drive appears under My Computer in Windows Explorer.
2. If a Found New Hardware screen appears, click Cancel to close it.

The WD SmartWare software that is on the drive installs the proper driver for your My Book drive.

1. Several different screens might also appear, depending on your computer's operating system:

IF your operating system is . . . THEN . . .
Windows XP Proceed to step 7.
Windows Vista or Windows 7 Skip to step 9 on page 8.

1. For Windows XP, one or two screens might appear, depending on whether the AutoRun (AutoPlay) function is enabled or disabled:

IF AutoRun (AutoPlay) is ... on your computer, THEN ...

Enabled Proceed to step a.
Disabled Skip to step b.

a. On Windows XP with AutoRun (AutoPlay) enabled, the Welcome to WD SmartWare screen displays (see Figure 5).
b. On Windows XP with AutoRun (AutoPlay) disabled, click to open the My Book drive listing in Windows Explorer and double-click the WD SmartWare application file to display the Welcome to WD SmartWare screen (see Figure 5).

Welcome to WD SmartWare What would you like to do? Install WD SmartWare Install VWD SmartWare Backup, Retrieve, Drive Lock, and Drive Management features. Install Drive Settings Do Not Install Install only VWD Drive Lock and Drive Management settings. Do not install VWD SmartWare. Rebeivers a backup

Note: If a Flash Player is installed on your computer, the screen is animated.

Figure 5. Welcome to WD SmartWare Screen

1. Continue to "Getting Started with the WD SmartWare Software" in the next section. If you do not want to install the WD SmartWare software, go to "Getting Started Without the WD SmartWare Software" on page 15 instead.
2. For Windows Vista or Windows 7, two or three screens might appear, depending on whether the AutoRun (AutoPlay) function is enabled or disabled:

IF AutoRun (AutoPlay) is ... on your computer, THEN ...

Enabled Proceed to step a.
Disabled Skip to step b.

a. For Windows Vista or Windows 7 with AutoRun (AutoPlay) enabled, click Open folder to view files on the AutoPlay screen and double-click the WD SmartWare application file to display the Welcome to WD SmartWare screen (see Figure 5 on page 7).
b. For Windows Vista or Windows 7 with AutoRun (AutoPlay) disabled, open Computer, click to open the My Book drive listing in Windows Explorer and double-click the WD SmartWare application file to display the Welcome to WD SmartWare screen (see Figure 5 on page 7).

1. Continue to "Getting Started with the WD SmartWare Software" in the next section. If you do not want to install the WD SmartWare software, go to "Getting Started Without the WD SmartWare Software" on page 15 instead.

Getting Started with the WD SmartWare Software

To get started with the WD SmartWare software:

1. The What would you like to do? prompt on the Welcome to WD SmartWare screen provides three options for getting started with the WD SmartWare software:

IF you want to install . . . THEN click the . . .

The full version of the WD SmartWare software, with continuous automatic backup, retrieve, drive lock password protection, and drive management features and:• Run your first backup• Password protect or register your drive	Install WD SmartWare button.
Only the WD SmartWare software drive lock password protection and drive management features, and password protect or register your drive,	Install Drive Settings button.
The full version of the WD SmartWare software and retrieve files that you have already backed up to your My Book drive on another computer,	Retrieve a backup link.

1. Read the license agreement and click Accept to continue.
2. Wait for the software installation to complete. This could take several minutes.

4. After the software installation completes:

IF you clicked . . . at step 1, THEN the WD SmartWare software displays . . .

Install WD SmartWare The initial Backup screen for performing your first backup (see Figure 6 on page 10). Here you can either:

- Run your first backup—See "Backing Up Your Computer Files" on page 16 before clicking Start Backup and then proceed to step 5.

- Skip the backup and display the WD SmartWare initial Drive Settings screen (Figure 7 on page 10)—See "Password Protecting the Drive" on page 27 and "Registering the Drive" on page 37 before clicking Skip Backup and then skip to step 6 on page 11.

Note: In this case, the WD SmartWare initial Drive Settings screen includes a Return to Backup button for returning to the initial Backup screen.

Install Drive Settings The drive management initial Drive Settings screen for securing and registering your drive (Figure 7 on page 10).

a. See :

- "Password Protecting the Drive" on page 27 - "Registering the Drive" on page 37

b. Skip to step 7 on page 11.

Retrieve a backup The Home screen for accessing all WD SmartWare functions:

a. See Figure 8 on page 11 and "Retrieving Backed Up Files" on page 23.

b. This completes the getting started procedure after selecting Retrieve a backup.

Note: The initial Backup and Drive Settings screens only appear one time—the first time you install the WD SmartWare software on your computer. After that, launching the software displays the Home screen so you can choose what you want to do.

5. After running your first backup:

a. Click Continue to Settings to display the WD SmartWare initial Drive Settings screen (Figure 7 on page 10).
b. See "Password Protecting the Drive" on page 27 and "Registering the Drive" on page 37 before clicking Continue to display the WD SmartWare Home screen (Figure 8 on page 11).

This completes the getting started procedure after selecting Install WD SmartWare and running your first backup.

Backup Ready to perform back up. MYDESKTOP My Book Essential OS (C:) 149.0 GB Total Data For Backup Files 1245 Size $13.0 KB Copments 486.7 KB Other 306.5 MB Morex 1.3 KB Morex 12.0 KB Total 321.8 KB Documents 4.0 MB MY BOOK (E:) 831.1 GB Total Data Backed Up Files 0 Size $13.0 KB Copments 486.7 KB Other 306.5 MB Morex 1.3 KB Morex 12.0 KB Total 221.8 KB Documents 4.0 MB 303.5 GB Press Skip Backup Start Backup

Figure 6. Initial Backup Screen

Drive Settings Set Security for your drive: Restarting Registration Set Security IWD Smartphonesタイ you approve your drive to prevent attacks have downloading your links Choose a password? Verify password Password text Warning IWD prevent release your password. If you forget your password, you will permanently take access to your links. Environment Return BackUp Continue

WD SmartWare Initial Drive Settings Screen

Drive Settings Set security for your drive: Security Registration Set Security AMD broadband adds you secure your drive to password drivers from accessing your file. Choose a password. Verify password. Password text. Warning AMD cannot provide your passwords. If you target your password, you will perform your write password in your data. I am welcome. Finish

Drive Management Initial Drive Settings Screen
Figure 7. Initial Drive Settings Screens

1. After password protecting or registering your drive, click Continue to close the WD SmartWare initial Drive Settings screen and display the WD SmartWare Home screen (Figure 8).

This completes the getting started procedure after selecting Install WD SmartWare and skipping the backup.

1. After password protecting or registering your drive, click Finish to close the drive management initial Drive Settings screen.

This completes the getting started procedure after selecting Install Drive Settings. In this case:

- Opening the WD SmartWare software displays the drive management Home screen (see Figure 9 on page 12) with only the Settings tab for performing all drive management functions (see "Customizing Your Drive Settings" on page 35).

- Clicking the Settings tab displays the drive management Drive Settings screen with a Preferences button that you can use to enable the Backup and Retrieve functions (see Figure 17 on page 27 and “Enabling the Backup and Retrieve Functions” on page 40).

Home Backup Retserver Settings Welcome MYDESKTOP My Dock Essential OS (C:) MY BOOK (E:) 149.0 GB Total 931.1 GB Total Systems 21.0 MB Playbox 466.7 KB Other 506.5 MB Movie 1.5 MB Movies 13.0 KB Blog 277.8 KB Documents 4.6 MB Additional Fees: 230.2 MB Platforms 466.7 KB Other 506.5 MB Movie 1.5 MB Movies 12.0 KB Blog 277.8 KB Documents 4.6 MB WD Online WDLStore Search Created Up Online User Manual WD SmartWare Version: 1.4.0.7 Update Software...

Figure 8. WD SmartWare Home Screen

Home Settings Welcome My Book Essential MY BOOK (E:) 931.1 GB Total Software From $2 GB $29.9 GB Free WD Online WD Divers Search Contact Up Online User Manager WD SmartWare Version: 1.4.0.7 Update Software...

Figure 9. Drive Management Home Screen

WD SmartWare Overview

The WD SmartWare software is an easy-to-use tool that gives you the power to:

- Secure your drive—In drive settings, create a password to protect your drive from unauthorized access or data theft.

- Protect your data automatically—Automatic, continuous backup instantly makes a copy whenever you add or change a file.

Note: Automatic backup protection is continuous for as long as your My Book drive is connected to your computer. Then, whenever you disconnect and reconnect the drive to your computer, the WD SmartWare software rescans your computer for new or changed files and resumes automatic, continuous backup as before.

- See your backup as it happens—Seeing is believing. Visual backup organizes and displays your content into categories and shows the progress of your backup.

- Retrieve lost files effortlessly—Bring back your valuable data to its original location whether you've lost all your data or just overwritten an important file.

WD SmartWare Home Screen

The WD SmartWare Home screen provides four tab-selected options:

• Home—Provides a Content Gauge with the capacity of each hard drive in or connected to your computer (see Figure 8 on page 11)
• Backup—Manages existing backups or creates new backups of your important data, including movies, music, documents, e-mail, and photos (see Figure 10 on page 17)
• Retrieve—Brings back valuable data that has been lost or overwritten (see Figure 13 on page 24)
• Settings—Manages security, diagnostics, power settings, and backup parameters (see Figure 11 on page 20)

On the WD SmartWare Home screen, you can modify the primary drive being categorized with the drop-down selection box under the name of your computer. By selecting a different drive, the WD SmartWarev software will identify the categories of files on that drive. Then click the:

- Backup tab to back up files from the selected drive to your My Book drive

- Retrieve tab to retrieve backed up files from your My Book drive to any location on your computer

In the Content Gauge for your computer's hard drive, all of your files that are available for backup are shown against a blue background in six categories where:

This file category Includes files with these extensions
Documents	.doc, .txt, .htm, .html, .ppt, .xls, .xml, and other document extensions
Mail	.mail, .msg, .pst., and other mail extensions
Music	.mp3, .wav, .wma, and other music extensions
Movies	.avi, .mov, .mp4, and other movie extensions
Pictures	.gif, .jpg, .png, and other picture extensions
Other	Others that do not belong in the five main categories

For a complete list of all included file extensions, search for Answer ID 3644 in the WD Knowledge Base at http://support.wdc.com.

Note that:

• The System category, shown against a dark gray background, includes all of your operating system files that are not available for backup. Files that are not backed up include system files, program files, applications, and working files like .tmp and .log files.
• The Retrieved category, also shown against a dark gray background, includes the files that you have retrieved from a prior backup. They, too, are not available for backup.
  • Hovering the pointer over a category displays the number of files in the category.

In the Content Gauge for your My Book drive, the Additional Files category includes all of the files shown in the used space portion of your drive properties. This space is not available for backups.

Note: The small number of files that are shown in the Additional Files category when you first install the WD SmartWare software—before performing your first backup—represents the system and hidden files that your computer's operating system put there when you installed the drive.

Drive Management Home Screen

The drive management Home screen is available after selecting Install Drive Settings, installing the software, completing the initial drive settings, and opening the WD SmartWare software. It has two tab-selected screen options:

- Home—Provides a Content Gauge showing the capacity and contents of your My Book drive (see Figure 9 on page 12)

- Settings—Manages the same security, diagnostics, and power settings as the WD SmartWare Drive Settings screen and provides a Preferences button for enabling the Backup and Retrieve functions (see Figure 17 on page 27)

As you copy files to your drive, the Content Gauge shows them in six categories:

• Documents
• Mail
• Music
  Pictures
• Other

See "WD SmartWare Home Screen" on page 13 for a description of the file categories.

Note: The small number of files that are shown in the Additional Files category when you first install the WD SmartWare software—before copying any files to the drive—represents the system and hidden files that your computer's operating system put there when you installed the drive.

Viewing the Info/Online Help Topics

Each WD SmartWare screen provides easy access to online help information to quickly guide you through your backup, retrieve, and settings tasks. Whenever you are uncertain about what to do, just click the info/online help icon in the upper-right corner of any screen:

Simple icon of a person inside a square frame, no text or symbols present

To close the info/help screen after reading the online help, click the X icon in the upper-right corner of the screen.

Getting Started Without the WD SmartWare Software

If you do not install the WD SmartWare software, you can still use your My Book as an external hard drive. In this case, however, you will not be able to:

- Protect your data with automatic continuous backups (see "Backing Up Your Computer Files" on page 16)

- Retrieve earlier versions of lost, or damaged files (see "Retrieving Backed Up Files" on page 23)

- Secure you drive and all of the files on it with a password (see "Locking and Unlocking the Drive" on page 27)

- Customize your software and drive settings for the best possible performance (see "Managing and Customizing Your Drive" on page 32)

- Check the operational condition of your drive with built-in diagnostic features (see "Checking Drive Health" on page 42)

To forego these performance features and get started without installing the WD SmartWare software:

1. Click Do Not Install on the Welcome to WD SmartWare screen to display the Continue without installing WD SmartWare? prompt:

WD SmartWare Continue without installing WD SmartWare? If you choose not to install the WD SmartWare software, you will be unable to use the software features that let you automatically back up and retrieve files, set security to protect data on your drive, and run diagnostics on your drive. Note: The Windows SIMS driver will be installed to ensure proper drive functionality Go Back Continue without Install

1. Click:

- Continue without Install if you still do not want to install the WD SmartWare software

- Go Back if you have changed your mind and do want to install the WD SmartWare software. In this case, go to "Getting Started with the WD SmartWare Software" on page 8.

Backing Up Your Computer Files

This chapter includes the following topics:

About Backing Up Your Computer Files

Backing It All Up

Advanced Backup Capabilities

About Backing Up Your Computer Files

The WD SmartWare software automatically and continuously backs up all of the files on your computer to your My Book drive—music, movies, photos, documents, e-mail, and other files.

Note: One installation of the WD SmartWare software supports up to three backup drives that are configured with WD SmartWare software.

After the WD SmartWare software categorizes the different types of files you have, clicking the Start Backup button will back all of them up. Or, you can select specific types of files to back up.

After performing a backup, the WD SmartWare software protects your files by backing up any:

• New file that is created on your computer or copied to your hard drive
• Existing file that is changed in any way

This protection is automatic—the WD SmartWare software does it for you without any action on your part—just make sure to leave your My Book drive connected to your computer.

Note: Automatic backup protection is continuous for as long as your My Book drive is connected to your computer. Then, whenever you disconnect and reconnect the drive to your computer, the WD SmartWare software rescans your computer for new or changed files and resumes automatic, continuous backup as before.

Additionally, the Backup screen (see Figure 10 on page 17) provides:

• Content Gauges for your computer's disk drives, so you can see the number of files and the storage size for each content category
• A Detailed View content box that you can use to select specific categories of files or folders to back up, with an Apply Changes button for implementing your selections
• Start Backup and Stop Backup buttons for controlling backups

Home Backup Retrieve Settings Ready to perform back up. MYDESKTOP My Book Essential OS (C:) 149.0 GB Total Detailed View MY BOOK (E:) Data For Backup File Size Size $13.26 MB Custom 21.4 KB Pictures A05.7 KB Other 306.5 MB Music 1.3 MB Movies 12.8 KB Real 231.6 KB Documents 4.7 MB 127.1 GB Free 931.1 GB Total Additional Files (1.2 KB) Pictures A06.7 KB Other 506.5 MB Music 1.3 MB Movies 12.8 KB Real 231.6 KB Documents 4.7 MB Data Backed Up Files p Size 0.01 KB Stop BackUp Start Backup

Figure 10. Backup Screen
In the Content Gauges for your computer's disk drives, the categories of files that would be included in the backup if you click Start Backup are shown where a:

• Light blue background in the Content Gauge for your computer's hard drive represents the original files that are available for backup
• Gray background in the Content Gauge for your My Book drive represents the potential backup copies of the original files
• Dark blue background identifies categories of files that have been backed up
  In the Content Gauge for your My Book drive, the Additional Files category includes all of the files shown in the used space portion of your drive properties. This space is not available for backups.
  In the Content Gauges and the Detailed View content box:

This file category Includes files with these extensions
Documents	.doc, .txt, .htm, .html, .ppt, .xls, .xml, and other document extensions
Mail	.mail, .msg, .pst., and other mail extensions
Music	.mp3, .wav, .wma, and other music extensions
Movies	.avi, .mov, .mp4, and other movie extensions
Pictures	.gif, .jpg, .png, and other picture extensions
Other	Others that do not belong in the five main categories

Note that:

- The System category, shown against a dark gray background, includes all of your operating system files that are not available for backup. Files that are not backed up include system files, program files, applications, and working files like .tmp and .log files.

- The Retrieved category, also shown against a dark gray background, includes the files that you have retrieved from a prior backup. They, too, are not available for backup.

• Hovering the pointer over a category displays the number of files in the category.

- For a complete list of all included file extensions, search for Answer ID 3644 in the WD Knowledge Base at http://support.wdc.com.

To back up other internal hard drives, click the Home tab and select the drive.

Backing It All Up

To back up all of your computer files:

1. Click the Backup tab to display the Backup screen (see Figure 10 on page 17).

2. Click Start Backup to back up all of your files.

3. During the backup:

- The Backup screen displays a progress bar and a message indicating the amount of data that has been backed up.

- The blue background in the Content Gauge for your computer's hard drive changes to yellow/amber for all of the files that have not yet been backed up.

- The gray background in the Content Gauge for your My Book drive changes to blue for each category as the backup completes.

- You can continue to set up your drive or perform any other functions because the WD SmartWare software will back up all of your files in the background.

• A Stop Backup button is available for stopping the backup.

1. Appearance of a backup successfully finished message means that the backup completed normally.

If any files could not be backed up, the WD SmartWare software displays a:

- Caution message indicating the number of files involved

• View link that you can click to see a list of the files and the reasons they were not backed up

Some applications and running processes can keep files from being backed up. If you cannot determine why some of your files were not backed up, try:

- Saving and closing all of your open files

- Closing all running applications—including your e-mail program and web browser

Important:

Appearance of a Caution message indicating that your drive is full means that there is not enough free space on the drive to complete the backup.

The best long-term solution would be to relegate the drive to long-term archive storage and:

a. Click the Home tab to display the Home screen.
b. Click the WDStore link in the WD Online box to view the Western Digital Online Store website.
c. Click External Hard Drives and select the best drive to suit your future requirements.

1. If you clicked Stop Backup at step 3, the Stop backup? confirmation prompt reminds you that if you stop the backup before it completes, the WD SmartWare software removes all of the backup files that were just copied to your My Book drive.

To continue, click either:

• Continue Backup to disregard your stop request and resume the backup
• Stop Backup to follow through with your request, stop the backup, and remove the newly created backup files

Advanced Backup Capabilities

The advanced backup capabilities include:

• Selecting specific files to back up
• Changing the backup software settings:
• Choosing the number of backup versions to keep
• Pausing the backup until your computer is idle

Selecting Specific Files to Back Up

To back up some of your computer files:

1. On the Backup screen (see Figure 10 on page 17), select Detailed View to open the backup files content box:

Detailed View MYDESKTOP Name Size ✓ Documents 2.27 MB ✓ Mail 230.78 KB ✓ Movies 15.98 KB ✓ Music 1.31 MB ✓ Other 506.46 MB ✓ Pictures 466.74 KB Apply Changes Revert

1. In the backup files content box:

2. Select the check boxes for the categories of files that you want to include in the backup

3. Clear the check boxes for the categories of files that you want to exclude from the backup

4. Click Apply Changes to refresh the Content Gauge for your My Book drive.

5. Click Start Backup to back up the selected categories of files.

Changing the Backup Software Settings

To optimize your backup, you can:

• Specify the number of backup versions to keep for each file
• Pause backups until your computer is idle

To configure these backup options:

1. Click the Settings tab to display the Settings screen (see Figure 11).
2. Click Set Up Software to display the Software Settings screen (see Figure 12 on page 21).
3. See:

- "Specifying the Number of Backup Versions" on page 21

- "Pausing Backups Until Your Computer is Idle" on page 22

Home Backup Retrieve Settings MY/DESKTOP My Book Essential Software Settings Software Settings options let you enter the number of backup versions you want to retain, delay backup until your computer is idle, select a folder to retrieve your backed up files to. and set preferences for automating softwares updates and starting the WD SmartWare software Set Up Software Drive Settings The drive type (Desktop or Network) converted to your computer determines the available drive settings, for example, naming your driver, assigning security, setting a sleep timer, and more. Set Up Drive

Figure 11. WD SmartWare Settings Screen

Home Backup Retrieve Settings Software Settings MYCESKTOP File History Backup Speed Retrieve Folder Preferences About your software Product Name: WO SmartWare Version: 14.0.7 Back to Main Settings

Figure 12. Software Settings Screen

Specifying the Number of Backup Versions. The WD SmartWare software can keep up to 25 older versions of each file. If you overwrite or delete a file by mistake, or want to see the file a couple of versions ago, the WD SmartWare software has a copy for you. You always have the most-recent specified number of versions of each file available for retrieves, and you can choose to keep from 1 to 25 versions.

Keeping more versions:

• Improves your ability to retrieve files from a longer back-in-time period
  • Consumes more disk space

To specify the number of backup versions that you want to keep for each file:

1. On the Software Settings screen (see Figure 12), click File History to display the Set File History dialog:

Set File History Enter the number of backup versions to keep for each file. 5 Apply

1. Specify the number of file versions that you want to keep (from 1 to 25) in the Enter the number of backup versions to keep for each file box.
2. Click Apply to save and implement the new number of backup versions.

Pausing Backups Until Your Computer is Idle. A large backup can take a lot of time, and can consume a lot of your system processing resources. The WD SmartWare software works in the background using minimal computer resources while you are working on your computer. If you want to pause all backup activity until your computer is idle, you can by enabling the Backup Speed option:

1. On the Software Settings screen (see Figure 12 on page 21), click Backup Speed to display the Reduce Backup Speed dialog:

Reduce Backup Speed This option may allow your system to run faster by reducing backup speed. Pause backup until computer is idle.

1. Select or clear the Pause backup until computer is idle check box to enable or disable the Backup Speed option.

Retrieving Backed Up Files

This chapter includes the following topics:

About Retrieving Files

Retrieving a File

Retrieving a Folder

Retrieving an Earlier Version of a File or Deleted Files

Retrieving All Your Files

About Retrieving Files

The WD SmartWare software makes it easy for you to retrieve files that have been backed up on your My Book drive and copy them to either:

• Their original locations on your computer
• A special retrieve folder

Retrieve is generally a five-step process:

1. Choose the drive to retrieve files from on the Home screen.
2. Choose the backup you want to retrieve files from.
3. Choose whether the files will be copied to a special retrieve folder or to their original locations.
4. Choose which files to retrieve—either individual files, folders, or everything.
5. Retrieve the files.

Retrieving a File

After selecting the drive on the Home screen, to retrieve a file:

1. Click the Retrieve tab to display the Retrieve screen (see Figure 13 on page 24).

2. In the Backed Up Volumes box, select the WD SmartWare volume that you want to retrieve a file or folder from and click Select Destination to display the Select a destination for retrieved files screen (see Figure 14 on page 24).

3. On the Select a destination for retrieved files screen:

IF you want to copy your retrieved files to . . .	THEN . . .
Thier original locations,	a. Select theTo the Original Placesoption.b. ClickSelect Filesto display the Select content to retrieve... screen (see Figure 15 on page 25) and proceed to step 4 on page 25.
A retrieved content folder,	a. Select theIn a Retrieved Content Folderoption.b. If you want to specify a different retrieve folder, clickBrowseand use the browse function to identify the new retrieve folder.c. ClickApplyto save and implement the new retrieve folder.d. ClickSelect Filesto display the Select content to retrieve... screen (see Figure 15) and proceed to step 4 on page 25.

Home Backup Retrieve Settings Select a volume to retrieve from MYDESKTOP OS (C:) My Book Essential MY BOOK (E:) Backed Up Volumes Original Computer Original Volume MYDESKTOP C+ From the list on the right, select the volume from which you want to retrieve a file or file. Select Destination

Figure 13. Retrieve Screen

Home Backup Retrieve Settings Select a destination for retrieved files. MYDESKTOP OS (C:) My Book Essential MY BOOK (E:) Where would you like to retrieve your files? To the Original Places Return all restored content to the original location on your computer. In a Retrieved Context Folder Put all retrieved content into a single folder. The current retrieve folder is at: C:\Documents and Settings\Ramon Sportsa\My Documents\Retrieved Contents If you would like to change this folder, please enter the new location below: C:\Documents and Settings\Raman Browse... Change Retrieve Volume Select Files

Figure 14. Select a Destination for Retrieved Files Screen

Home Backup Retrieve Settings Select content to retrieve from MY BOOK (E:) MYDESKTOP OS (C:) 149.0 GB Total Data Retrieved Files 0 Size 0.00 KB Retrieved 513.3 MB Other 21.9 GB 127.1 GB Free My Book Essential MY BOOK (E:) + Retrieve All Files All the data from this backup will be retrieved from your MYDESKTOP (C:1) volume, including files you have previously deleted and the most current version of each file. Data to Retrieve Files: 5000 Size: $12.26 KB + Retrieve Some Files Cancel Retrieving Start Retrieving Reselect Destination

Figure 15. Select Content to Retrieve Screen

1. On the Select content to retrieve... screen, select Retrieve Some Files to display the retrieve files selection box (see Figure 16 on page 26).
2. Navigate through the folder structure to find the files you want. Also, you can use the search box by typing the name (or partial name) of the file or folder:

- Click the appropriate file category button to list the files by category:

• Pictures
• Music
• Movies
• Documents
• Other

• Mail

• Select the View icon to list individual files.

• Type all or part of the file name in the search box, using the question mark (?) as a wildcard character, to locate the file and press the Enter key to initiate the search. To eliminate the search filter, delete all of the text in the search box and press Enter.

• Select the check box for the files that you want to retrieve.

• Click Start Retrieving.

Retriever Some Files Show older files Show deleted files View Search Pictures Music Movies Documents Other Mail Name Size Date C DOLL Documents and Settings ID06 Original File Location C:\

Figure 16. Retrieve Files Selection Box

7. During the retrieve:

• The Retrieve screen displays a progress bar and a message indicating the amount of data that has been copied to the specified retrieve location.
• A Cancel Retrieving button is available for stopping the retrieve.

8. A Retrieval accomplished message signifies completion of the retrieve.

A Partial retrieve accomplished message means that all of the files you selected for the retrieve were not copied to the specified retrieve location. In this case, either a:

• Files Not Retrieved message provides the number of files that were not retrieved and a link to a failed-to-retrieve information screen. Click the View files link to see the list of files and the reasons they were not retrieved.
• Destination is full message means that your computer does not have sufficient disk space to complete the retrieve.

Retrieving a Folder

To retrieve a folder from your drive, and all of the files within a folder, which may be across multiple categories, in the retrieve files selection box (see Figure 16), right-click the folder and choose Select folder in all content categories.

Retrieving an Earlier Version of a File or Deleted Files

In the retrieve files selection box (see Figure 16), check the Show Deleted Files box and/or the Show older versions of files box. Now, when selecting files to retrieve, you can select individual files that were overwritten or deleted. Likewise, retrieving entire folders in this mode will retrieve older versions and deleted files as well.

Retrieving All Your Files

On the Select content to retrieve... screen (see Figure 15 on page 25), choose the Retrieve all Files option, which retrieves files across all categories and copies them to either their original locations or the Retrieve Contents folder.

Locking and Unlocking the Drive

This chapter includes the following topics:

Password Protecting the Drive

Unlocking the Drive

Changing Your Password

Turning Off the Drive Lock Feature

Password Protecting the Drive

You should password protect your drive if you are worried that someone else will gain access to your drive and you do not want them to see your files on the drive.

CAUTION! The WD SmartWare software uses your password to electronically lock and unlock your drive. If you forget your password, you will not be able to access the data that is on your drive or write new data to it. You will have to erase the drive before you can use it again.

You can reach the Set Security dialog for password management during the initial getting started process or from the WD SmartWare Settings tab on the Drive Settings screen. There, you can:

• Create a password
• Change a password
• Eliminate the need for a password

To create a password and keep others from accessing the files on your drive:

1. Click the Settings tab to display either the WD SmartWare Settings screen (Figure 11 on page 20) or the drive management Drive Settings screen (Figure 17).
2. If you opened the WD SmartWare Settings screen, click Set Up Drive to display the WD SmartWare Drive Settings screen (Figure 17).

Close Settings OK OK Cancel Display Description Image Design Other Material Details Material Details: 100% Material Details: 100% Material Details: 100%

WD SmartWare Drive Settings Screen

Close Settings On Book Options Showable Explainments Composition Clear White Clear Blue Defaulting... Product ID: 0014 Product Name: 320000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 Product ID: 320185678 Product Name: 3219999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999 Product ID: 321856788 Product Name: 321856788 Product Name: 321856788 Product ID: 321856788 Product Name: 321856788 Product ID: 321856788 Product Name: 321856788 Product ID: 321856788 Product Name: 321856788 Product ID: 321856788 Product Name:321856788 Product Name:321856788 Product ID: 321856788 Product Name:321856788 Product ID: 321856788 Product Name:321856788 Product ID: 321856788 Product Name:321856788 Product ID: 321856788 Product Name:321857144 Product Name:321857144 Product ID: 321857144 Product Name:321857144 Product ID: 321857144 Product Name:321857144 Product ID: 321857144 Product Name:321857144 Product ID: 321857144 Product Name:321856788 Product Name:321856788 Product ID: 321856788 Product Name:321856788 Product ID: 321856788 Product Name:321856788 Product ID: 321856788 Product Name:371856788 Product Name:371856788 Product ID: 371856788 Product Name:371856788 Product ID: 371856788 Product Name:371856788 Product ID: 371856788 Product Name:371856788 Product ID: 371856788 Product Name:371857144 Product Name:371857144 Product ID: 371857144 Product Name:371857144 Product ID: 371857144 Product Name:371857144 Product ID: 371857144 Product Name:371857144 Product ID: 371857144 Product Name:371856788 Product Name:371856788 Product ID: 371856788 Product Name:371856788 Product ID: 371856788 Product Name:371856788 Product ID: 371856788 Product Name:321856788 Product Name:321856788 Product ID: 321856788 Product Name:321856788 Product ID: 321856788 Product Name:321856788 Product ID: 3218567

Drive Management Drive Settings Screen
Figure 17. Drive Settings Screens

1. On the Drive Settings screen, click Security to display the Set Security dialog:

Set Security WD SmartWare lets you secure your drive to prevent others from accessing your files. Choose a password Verify password Password hint Warning WD cannot retrieve your password. If you forget your password, you will permanently lose access to your data. I understand. Save Security Settings

1. Type your password in the Choose a password box.
2. Retype your password in the Verify password box.
3. Type a hint to help remind yourself of your password in the Password hint box.
4. Read the warning about the possibility of data loss if you forget your password.
5. Click the I understand check box to signify that you accept the risk.
6. Click Save Security Settings to save your password and enable password protection for your drive.

CAUTION! After creating a password, the drive remains unlocked for as long as you continue your current work session. Then, the WD SmartWare software:

• Locks the drive when you shut down your computer, disconnect your drive, or the computer goes into the sleep mode
• Requires you to type your password to unlock the drive when you restart your computer or reconnect your drive

Unlocking the Drive

After you have created a password to keep others from accessing the files on your drive, you will have to type your password to unlock the drive whenever:

• You shut down and restart your computer
• You disconnect and reconnect the drive to your computer
• Your computer exits the sleep mode

You will have to do this even if you do not have the WD SmartWare software installed on your computer.

Unlocking the Drive with the WD SmartWare Software

Whenever you shut down and restart your computer, or disconnect and reconnect the drive to your computer, the WD SmartWare software displays a Drive is locked message in place of the Content Gauge for your My Book drive:

My Book Essential Drive is locked Click the above drive image to unlock drive

To unlock your drive using the WD SmartWare software:

1. As prompted, click the My Book image above the Drive is locked message to display the WD SmartWare drive unlock screen:

WD SmartWare Unlock My Book To continue, your My Book drive must be unlocked Please provide your password Password: ▶ Password hint Cancel Unlock

1. Type your password in the Password box.
2. Click Unlock to unlock your drive and enable the WD SmartWare software.

Unlocking the Drive Without the WD SmartWare Software

Whenever you connect your password-protected drive to a computer that does not have the WD SmartWare software installed, you can use the WD SmartWare Drive Unlock utility to unlock the drive there. The WD SmartWare software provides the Drive Unlock utility on a “virtual” CD drive that appears under My Computer in your Windows Explorer display whenever the drive is locked.

To unlock the drive without the WD SmartWare software installed:

1. Start the WD SmartWare Drive Unlock utility by either:

2. Using your computer's file management utility to open the WD Unlock virtual CD and double-clicking the Unlock.exe file

3. Clicking Start > My Computer and double-clicking the WD Unlocker virtual CD icon under Devices with Removable Storage

WD SmartWare Drive Unlock Unlock your drive Enter your password to unlock your drive. Password Password hint Name: My Book Essential Serial: WCAV5D4804103 Size: 031.08 Exit Unlock

1. Type your password in the Password box.
2. Click Unlock to unlock your drive.
3. At the Your drive is now unlocked prompt, click Exit to close the WD SmartWare Drive Unlock utility.

Changing Your Password

To change your password:

1. Click Security on either the WD SmartWare Drive Settings screen or the drive management Drive Settings screen (see Figure 17 on page 27) to display the Your Drive is Secure dialog:

Your Drive is Secure To change your current security settings, please enter your password below. Password Password hint Remove sexually Change password New password Verify password Password hint Update Security Settings

1. Type your current password in the Password box.
2. Select the Change password option.
3. Type your new password in the New password box.

4. Retype your new password in the Verify password box.

5. Type a hint to help remind yourself of your new password in the New password hint box.

6. Click Update Security Settings to change your password.

Turning Off the Drive Lock Feature

To remove password protection from your drive:

1. Click Security on either the WD SmartWare Drive Settings screen or the drive management Drive Settings screen (see Figure 17 on page 27) to display the Your Drive is Secure dialog:

Your Drive is Secure To change your current security settings, please enter your password below. Password ▶ Password hint ○ Remove sexuality ○ Change password New password Verify password Password hint Update Security Settings

1. Type your password in the Password box.
2. Select the Remove security option.
3. Click Update Security Settings to remove password protection from your drive and redisplay the Set Security dialog.

Managing and Customizing Your Drive

This chapter includes the following topics:

Using the WD SmartWare Icon Opening the WD SmartWare Software Checking Drive Status Monitoring Icon Alerts Safely Disconnecting the Drive Customizing Your Software Settings Customizing Your Drive Settings Uninstalling the WD SmartWare Software Restoring the WD SmartWare Software and Disk Image

Using the WD SmartWare Icon

After you have installed the WD SmartWare software, the WD SmartWare icon displays in the Windows taskbar:

9:50 AM

By clicking the icon, you can:

• Open the WD SmartWare software
• Check the drive status
  • Monitor icon alerts
  • Safely disconnect the drive

The following sections describe how to use the icon and other ways to do these things.

Opening the WD SmartWare Software

If the WD SmartWare software does not start automatically, you can start it by:

• Clicking Start > (All) Programs > WD SmartWare > WDSmartWare
• Double-clicking the WD SmartWare icon in the taskbar

Note: You can also left- or right-click the WD SmartWare icon in the taskbar and select WD SmartWare.

Checking Drive Status

Hover the pointer over the WD SmartWare icon in the taskbar to see the drive capacity used and drive temperature status, and to find out if the drive is locked:

WD Drive Status Drive Name [Volumes] Used Locked Temperature My Book Essential USB HDD [F:] 1% No OK 9:52 AM

Monitoring Icon Alerts

The WD SmartWare icon in the taskbar flashes to indicate drive status:

IF the WD SmartWare icon flashes . . . THEN the drive might be . . .
Green and white, Locked or in a format that the	WD SmartWare software does not understand (non-Windows format in a Windows environment).
Red and white, Overheated.	Power down the drive and let it cool for 60 minutes. Power it back on, and if the problem persists, contact WD Support.

Safely Disconnecting the Drive

CAUTION! To prevent data loss, close all active windows and applications before shutting down or removing the drive.

You can safely disconnect the drive from your computer by using either:

• The WD SmartWare icon in the taskbar
• The drive power button

Using the WD SmartWare Icon

To safely disconnect the drive using the WD SmartWare icon:

1. Right-click the WD SmartWare icon in the taskbar, and then click Safely remove My Book Essential USB HDD:

Safely remove My Book Essential USB HDD [F:] WD SmartWare Exit WD SmartWare 9:55 AM

You might hear the drive power down.

1. Wait for the power/activity LED to turn off before disconnecting the drive from the computer.

Using the Drive Power Button

To safely disconnect the drive using the drive power button:

1. Press the power button on the back of the My Book drive.
   You might hear the drive power down.
2. Wait for the power/activity LED to turn off before disconnecting the drive from the computer.

Customizing Your Software Settings

The WD SmartWare software makes it easy for you to quickly customize its own software settings for the best possible performance with your drive by:

• Specifying the number of backup versions that you want to keep for each file
  • Inhibiting backups until your computer is idle
• Specifying a unique folder to store files retrieved from your drive
  • Automatically checking for WD SmartWare software updates

To customize your WD SmartWare software settings for the best possible performance with your drive, on the Software Settings screen (see Figure 12 on page 21):

IF you want to . . . THEN click . . . AND see . . .
Change the number of backup versions to keep for each file,	File History “Specifying the Number of Backup Versions” on page 21.
Enable anytime backups or inhibit them until your computer is idle,	Backup Speed “Pausing Backups Until Your Computer is Idle” on page 22.
Specify a path to a different retrieve folder,	Retrieve Folder “Specifying a Different Retrieve Folder” on page 34.
Change the option that checks for software updates whenever you reconnect your My Book drive to your computer,	Preferences “Setting the Preferences Option” on page 35.

Specifying a Different Retrieve Folder

When you start a retrieve, you can choose whether you want to store the retrieved files in either:

• Their original locations on your computer
• A Retrieved Content folder

By default, the WD SmartWare software creates and uses a Retrieved Content subfolder in your My Documents folder. To specify a different folder:

1. Either create a new folder or determine which existing folder you want to use.
2. On the Software Settings screen (see Figure 12 on page 21), click Retrieve Folder to display the Set Retrieve Folder dialog:

Set Retrieve Folder The current retrieve folder is at: C:\Documents and Settings\Administrator\Retrieved Files If you would like to change this folder, please enter the new location below. C:\Documents and Settings\Administrator Browse... Apply...

1. Click Browse and use the browse function to identify the new retrieve folder.

2. Click Apply to save and implement the new retrieve folder.

Setting the Preferences Option

When enabled, each time you reconnect your My Book drive to your computer, the Preferences option checks for software updates. This ensures that you are always using the most-recent software version.

To enable or disable the Preferences option:

1. On either the Software Settings screen (Figure 12 on page 21) or the drive management Drive Settings screen (Figure 17 on page 27), click Preferences to display the Set Preferences dialog:

Set Preferences Select automation options. ✓ Automatically check for WD SmartWare software updates.

WD SmartWare Set Preferences Dialog

Set Preferences Select automation options. ✓ Automatically check for WD SmartWare software updates. Unlock the full potential of WD SmartWare to back up and retrieve the data on your WD drive. To add Backup and Retrieve functionality to WD SmartWare, click Enable Backup and Retrieve functions; then click Enable Backup Now □ Enable Backup and Retrieve functions. Enable Backup Now

Drive Management Set Preferences Dialog

1. Select or clear the Automatically check for WD SmartWare software updates check box to enable or disable the Preferences option.

Note: See "Enabling the Backup and Retrieve Functions" on page 40 for information about the Enable Backup and Retrieve check box on the drive management Set Preferences dialog.

Customizing Your Drive Settings

The WD SmartWare software makes it easy for you to quickly customize the settings of your drive for the best possible performance:

• Security—Create, modify, and disable passwords that keep others from accessing the files on your drive.
• Registration—Register your drive to receive free technical support during the warranty period and find out about software updates, product enhancements, and price discount opportunities.
• Diagnostics—Run diagnostics and status checks to make sure your drive is working properly.
• Sleep Timer—Turn your drive off during periods of extended inactivity to conserve power and extend the life of the drive.
• Drive Erase—Erase all of the contents on the drive, including your password if you have one.
• Preferences—Check for software updates or enable the Backup and Retrieve functions if you selected Install Drive Settings at the What would you like to do? prompt on the Welcome to WD SmartWare screen.

To customize your drive settings for the best possible performance, on either the WD SmartWare Drive Settings screen or the drive management Drive Settings screen (see Figure 17 on page 27):

IF you want to . . . THEN click . . . AND see . . .
Use a password to keep others from accessing the files on your drive,	Security “Password Protecting the Drive” on page 27.
Change your password,	Security	“Changing Your Password” on page 30.
Remove password protection from your drive,	Security “Turning Off the Drive Lock Feature” on page 31.
Register your drive to receive free technical support during the warranty period and be kept up-to-date on the latest WD products,	Registration “Registering the Drive” on page 37.
Run drive diagnostics and status checks,	Diagnostics “Checking Drive Health” on page 42.
Specify an inactive time interval to turn off your drive,	Sleep Timer “Setting the Drive Sleep Timer” on page 37.
Erase your drive so you can retrieve the space and start over with a fresh set of backups,	Drive Erase “Erasing the Drive” on page 38.
Change the option that checks for software updates whenever you reconnect your WD SmartWare drive to your compute,	Preferences (Available on either the Software Settings screen or the drive management Drive Settings screen)	“Setting the Preferences Option” on page 35.
Enable the Backup and Retrieve functions,	Preferences (Only available on the drive management Drive Settings screen)	“Enabling the Backup and Retrieve Functions” on page 40.

Registering the Drive

The WD SmartWare software uses your computer's Internet connection to register your drive. To register your drive to receive free technical support during the warranty period and be kept up-to-date on the latest WD products:

1. Make sure that your computer is connected to the Internet.
2. On the Drive Settings screen (see Figure 17 on page 27), click Registration to display the Register Drive dialog:

Register Drive WO lets you register your drive to receive software update notifications and customer support. First name* Last name* E-mail address* *Required Field Preferred language English ✓ Yes, I want to receive communication from WD, including software updates for registered products, product improvement opportunities, and member discounts on WD products. WD privacy policy Register Drive

1. Type your first name in the First name box.
2. Type your last name in the Last name box.
3. Type your e-mail address in the E-mail address box.
4. Select your language in the Preferred language box.
5. Select or clear the Yes, I want to receive communication... check box to specify whether or not you want to receive e-mail notifications about software updates, product enhancements, and price discount opportunities.
6. Click Register Drive to register your drive.

Setting the Drive Sleep Timer

The drive sleep timer turns off the power to your drive after a certain period of inactivity to conserve power and minimize long-term wear on the drive.

To specify the inactivity period for the sleep timer:

1. On the Drive Settings screen (see Figure 17 on page 27), click Sleep Timer to display the Set Sleep Timer dialog:

Set Sleep Timer Set the amount of time before your drive goes to sleep. Note: OS settings may override these settings. Turn off Drive: After 10 minutes Set Timer

1. In the Turn off Drive box, select the inactivity time interval at which you want to turn off the drive.
2. Click Set Timer to save and implement your sleep timer selection.

Erasing the Drive

CAUTION! Erasing your drive permanently deletes all of the data on your drive. Always make sure that you no longer need any of the data on your drive before erasing the drive.

Note: Erasing your drive also deletes the WD SmartWare software and all of the support files, utilities, online help and user manual files. You can download these to restore your My Book to its original configuration after erasing the drive.

The WD SmartWare software provides two ways to erase your drive, depending on whether your My Book drive is locked or not:

IF your drive is . . . AND you . . . THEN see . . .
Not locked,	Want to erase the drive,
Locked, Have forgotten or lost your password and must erase the drive,	“Using the Drive Settings Drive Erase Function” in the following section.
	“Using the Drive Unlock Utility” on page 39.

Using the Drive Settings Drive Erase Function. To erase your My Book when the drive is not locked:

1. On the Drive Settings screen (see Figure 17 on page 27), click Drive Erase to display the Erase Drive dialog:

Erase Drive Warning Clicking Format permanently erases all the data on your drive. I understand. Drive Erase

1. Read the warning about the loss of data if you erase your drive.
2. Click the I understand check box to signify that you accept the risk.
3. Click Drive Erase to erase your drive.

After the drive erase operation completes, go to support.wdc.com and see Knowledge Base Answer ID #5419 for information about downloading and restoring the WD SmartWare software and disk image on your My Book drive.

Note: Erasing your drive also removes your password. If you still want to use a password to protect your drive, you will need to re-create it after restoring the WD SmartWare software and disk image. (See “Password Protecting the Drive” on page 27.)

Using the Drive Unlock Utility. To erase your My Book when the drive is locked and you have forgotten or lost your password:

1. Either:

- Click the My Book image above the Drive is locked prompt on the Home screen to display the WD SmartWare drive unlock screen:

WD SmartWare Unlock My Book To continue, your My Book drive must be unlocked. Please provide your password. Password: ▶ If password holds Cancel Finish

- Start the WD SmartWare Drive Unlock utility by either:

- Using your computer's file management utility to open the WD Unlock virtual CD and double-clicking the Unlock.exe file

- Clicking Start > My Computer, opening the WD Unlock virtual CD listing under Devices with Removable Storage, and double-clicking the Unlock.exe file

WD SmartWare Drive Unlock Unlock your drive: Enter your password to unlock your drive. Password Password kit Name: My Book Standard Serial: HCMV024800465 Size: 301.66 Exit Unlock

1. Make five attempts to unlock the drive by:

a. Typing a password in the Password box.

b. Clicking Unlock.

1. The fifth invalid password attempt displays the Too Many Password Attempts prompt:

WD SmartWare Drive Unlock Too Many Password Attempts There were too many password recovery attempts. To try spem: 1. Safely unplug your drive from the computer. 2. Turn your drive off, and then on. 3. Plug your drive into the computer. Warning Clicking Format permanently erasles all the data on your drive. I understand Format Exit

1. Read the warning about the loss of data if you erase your drive.

2. Click the I understand check box to signify that you accept the risk.

3. Click Format to erase your drive.

After the drive erase operation completes, go to support.wdc.com and see Knowledge Base Answer ID #5419 for information about downloading and restoring the WD SmartWare software and disk image on your My Book drive.

Note: Erasing your drive also removes your password. If you still want to use a password to protect your drive, you will need to re-create it after restoring the WD SmartWare software and disk image. (See “Password Protecting the Drive” on page 27.)

Enabling the Backup and Retrieve Functions

If you selected Install Drive Settings at the What would you like to do? prompt on the Welcome to WD SmartWare screen and now want to enable the backup and retrieve functions:

1. On the drive management Drive Settings screen (see Figure 17 on page 27), click Preferences to display the Set Preferences dialog:

Set Preferences Select automation options. ✓ Automatically check for WD SmartWare software updates. Unlock the full potential of WD SmartWare to back up and retrieve the data on your WD drive. To add Backup and Retrieve functionality to WD SmartWare, click Enable Backup and Retrieve functions; then click Enable Backup Now. □ Enable Backup and Retrieve functions. Enable Backup Now

1. Select the Enable Backup and Retrieve functions check box.

2. Click Enable Backup Now to:

3. Add the Backup and Retrieve tabs to the Home screen display

4. Add the Set Up Software and Set Up Drive options to the Settings screen
5. Remove the Preferences option from the Drive Settings screen

Uninstalling the WD SmartWare Software

Important: You can easily uninstall the software. However, you will need to restart the backup job manually after reinstalling the software as uninstalling deletes all existing backup job configurations. (See “Backing Up Your Computer Files” on page 16.)

Use your operating system's Add or Remove Programs function to uninstall the WD SmartWare software from your computer.

Uninstalling on Windows XP

1. Click Start > Control Panel.
2. Double-click Add or Remove Programs.
3. Select WD SmartWare and click Remove.
4. Click Yes at the Are you sure... prompt.

Uninstalling on Windows Vista or Windows 7

1. Click Start > Control Panel.
2. Double-click Programs and Features.
3. Click WD SmartWare or the WD SmartWare icon and click Uninstall/Change at the top of the screen.
4. Click Yes at the Do you wish to proceed... prompt.

Restoring the WD SmartWare Software and Disk Image

In addition to deleting all of the data on your My Book drive, erasing or reformatting the drive also removes the WD SmartWare software and all of the support files, utilities, online help and user manual files.

If you ever need to remove and reinstall the WD SmartWare software on your computer, or move the drive to another computer and install the software there, you will need to restore the WD SmartWare software and disk image on your My Book drive. To do this, after you have erased or reformatted the drive, go to support.wdc.com and see Knowledge Base Answer ID #5419.

Checking Drive Health

The files on your My Book drive are important to you. The WD SmartWare software has several built-in diagnostic tools to help make sure that your drive is performing well. Run the following tests if you are concerned that your drive is not operating properly:

Diagnostic Tool Description

Quick S.M.A.R.T. Status Check S.M.A.R.T. is a failure-prediction function that continuously monitors key internal performance attributes of the drive. A detected increase in drive temperature, noise, or read/write errors, for example, can provide an indication that the drive might be approaching a serious failure condition. With advanced warning, you could take precautionary measures, like moving your data to another drive, before a failure occurs.The result of a quick S.M.A.R.T. status check is a pass or fail evaluation of the drive's condition.The S.M.A.R.T. status check completes within a second or two.

Quick Drive Test Your My Book drive has a built-in Data Lifeguard diagnostic utility that tests the drive for error conditions. The quick drive test checks the drive for major performance problems.The result of a quick drive test is a pass or fail evaluation of the drive's condition.The quick drive test can take several minutes to complete.

Complete Drive Test The most comprehensive drive diagnostic is the complete drive test. It methodically tests every sector for error conditions, and inserts bad-sector markers as required.The complete drive test can take several hours to complete, depending on the size and data configuration of your drive.

The best time to run the drive diagnostics and status checks is on a regular basis, before you encounter any problems with your drive. And, because they are so fast, running the quick S.M.A.R.T. status check and the quick drive test provides a high level of assurance with minimal inconvenience. Then, run all three whenever you encounter disk error conditions when backing up or retrieving files.

To run drive diagnostics and status checks:

1. On the Drive Settings screen (see Figure 17 on page 27), click Diagnostics to display the Run Diagnostics dialog:

Run Diagnostics Perform a S.M.A.R.T. (Self Monitoring, Analysis, and Reporting Technology) drive check to predict a potential drive failure. This status check completes within a second or two. Quick SMART Status Perform a quick drive self-test: This test typically takes up to 2 minutes to complete. Quick Drive Test Perform a full media scan to detect bad sectors. This test may take hours for large drivers. Complete Drive Test

1. Click the button for the test that you want to run:

2. Quick SMART Status

3. Quick Drive Test
4. Complete Drive Test

Using the Drive with a Mac

The My Book drive is preformatted as a single NTFS partition for compatibility with all updated Windows operating systems. To use the drive with Mac OS X Leopard or Snow Leopard operating systems, and to use Time Machine, if you want, you must first:

• Reformat the drive to a single HFS+J partition
• Restore the WD SmartWare software and disk image

This chapter includes the following topics:

Reformatting the Drive
Restoring the WD SmartWare Software and Disk Image
Connecting the Drive and Getting Started
Enhancing Performance with WD +TURBO
Installing the WD SmartWare Software
The WD SmartWare Home Screen
Using the WD SmartWare Icon
Opening the WD SmartWare Software
Checking Drive Status
Safely Dismounting the Drive
Unlocking the Drive
Uninstalling WD SmartWare Software

Reformatting the Drive

CAUTION! Reformatting the drive erases all its contents. If you have already saved files on the drive, be sure to back them up before reformatting it.

Go to support.wdc.com and refer to the appropriate Knowledge Base Answer ID for information about reformatting a Windows drive:

• 287 or 3323 for Mac OS X
• 1364 for FAT32

See “Troubleshooting” on page 57 for more information about reformatting a drive.

Restoring the WD SmartWare Software and Disk Image

After you have reformatted your My Book drive for use on Mac computers, go to support.wdc.com and see Knowledge Base Answer ID #5419 for information about downloading and restoring the Mac version of the WD SmartWare software and disk image on the drive.

Connecting the Drive and Getting Started

After you have reformatted your My Book drive for use on a Mac computer and downloaded and restored the Mac version of the WD SmartWare software and disk image:

1. Turn on your Mac computer.

2. Connect the My Book drive to your computer as shown in Figure 4 on page 6.

3. Verify that the My Book icon displays on your desktop, where "MY BOOK" is the name you assigned to the volume when you reformatted the drive for use with the Mac computer:

1. The first time you connect your My Book drive to your computer, a message asks if you want to use the drive to back up with Time Machine:

Do you want to use "MyBookEssential" to back up with Time Machine? Time Machine keeps an up-to-date copy of everything on your Mac. It not only keeps a spare copy of every file, it remembers how your system looked, so you can revisit your Mac as it appeared in the past. Cancel Use as Backup Disk

WD SmartWare software is fully compatible with Apple's Time Machine software. When using Time Machine, you can still use the WD SmartWare software for password protecting the drive, registering the drive, and running drive diagnostics.

a. If you do not want to use the Time Machine backup software, click Cancel. b. If you do want to use the Time Machine backup software, click Use as Backup Disk. The My Book icon now displays as:

Your My Book drive is now ready to use as an external storage device. You can enhance its performance by installing the following software that is on the drive:

• WD +TURBO utility (see "Enhancing Performance with WD +TURBO" in the next section)
• WD SmartWare software (see "Installing the WD SmartWare Software" on page 47)

Enhancing Performance with WD +TURBO

WD +TURBO is a utility on the My Book drive that you can install to improve the performance of the drive on a Mac computer.

If you are going to install the WD SmartWare software, you do not need to install the WD +TURBO utility yourself—the WD SmartWare software will install it for you. If you are not going to install the WD SmartWare software, install WD +TURBO to enhance the performance of your My Book drive.

To install WD +TURBO:

1. Double-click the My Book icon and then double-click the Extras folder on the screen that displays:

MY BOOK Extras User Manuals WD SmartWare.app

1. Double-click the WD +TURBO Installer icon:

1 of 2 selected, 930.72 GB available WD +TURBO Installer app WD Smart Ware Uninstaller.app

1. Click Install on the WD +TURBO Driver Installer screen:

WD + TURBO Driver Installer iWD Western Digital® Customize Remove Install © 2008-2009 Western Digital Corporation.

1. Read the license agreement and click Accept to continue.
2. A message informs you that installing the drivers requires you to restart your computer to make them active:

Installing the Western Digital +TURBO drivers requires you to restart the computer to make them active. Do you want to proceed and install the drivers? No Yes

Click Yes to continue.

1. Type the password that you normally use to access the computer in the Password box and click OK:

WD + TURBO Installer requires that you type your password. Name: My Desktop Password: Details Cancel OK

1. As prompted, when the installation completes, click Yes to restart the computer:

Installing +TURBO drivers was successful. WD recommends that you restart. Do you want to restart now? No Yes

1. When the computer restarts, the My Book icon now looks like this, where "MY BOOK" is the name you assigned to the volume when you reformatted the drive for use with the Mac computer:

Your My Book drive is now ready to use as an enhanced-performance external storage device.

Installing the WD SmartWare Software

To install the WD SmartWare software:

1. Double-click the My Book icon and then double-click the WD SmartWare icon on the screen that displays:

MY BOOK Extras User Manuals wD SmartWare.app

1. The WD SmartWare Software Installer screen displays:

WD SmartWare Software Installer Welcome to the WD SmartWare software installer. WD SmartWare provides all the software you need to organize, secure, back up, and retrieve your important files and memories. WD SmartWare backs up files. continuously do your file are updated each time you make a change and you never have to worry about having data. Exit Continue to install

1. Click Continue to Install and the installer utility will detect that the WD SmartWare software is not installed:

WD SmartWare Software Installer Install WD SmartWare software... Installing software WD SmartWare Software Installer for Mac (WD SmartWare is not installed.) → v1.3.0.8 Exit Install WD SmartWare

1. Click Install WD SmartWare to begin the installation.
2. Read the license agreement and click Accept to continue.
3. Type the password that you normally use to access the computer in the Password box and click OK:

WD SmartWare requires that you type your password. Name: My Desktop Password: Details Cancel OK

1. Wait for the installation to complete. This could take several minutes:

WD SmartWare Software Installer Installing the WD SmartWare software. Installing software WD SmartWare Software Installer for Mac (WD SmartWare is not installed) → v1.3.0.8 Exit Install WD SmartWare

When the installation completes, the WD SmartWare Home screen displays (see Figure 18 on page 49).

Welcome My Desktop's Mac mini Macintosh HD My Book Essentials MY BOOK 111.3 GB Total Systems 200 KB Other 10 GB Pictures 100 KB Music 150 KB Movies 10 KB Hool 80 KB Documents 80 KB Free 901.3 GB Total Additional Files 200 KB Other 10 GB Pictures 100 KB Music 150 KB Movies 10 KB Hool 80 KB Documents 80 KB Free WD Online WU Store Support Contact Us Online User Manual WD SmartWare Version 1.3.0.7 Update Software...

Figure 18. WD SmartWare Home Screen

The WD SmartWare Home Screen

On the Home screen, you can modify the primary drive being categorized with the dropdown selection box under the name of your computer. If you select a different drive, the system will identify the categories of files on that drive. Then click the Backup or Retrieve tab to either back up from or retrieve files to a location other than your computer's main hard drive.

In the Content Gauge for your computer's hard drive, all of your files that are available for backup are shown against a blue background in categories that are based on the following folders on your computer:

• Music
• Movies
• Pictures
• Mail
• Documents
• Other

Each category includes all of the files in the represented folder except the Other category, which includes all of the files in all other folders on your computer.

Note that:

• The System category, shown against a dark gray background, includes all of your operating system files that are not available for backup. Files that are not backed up include system files, program files, applications, and working files.
• The Retrieved category, also shown against a dark gray background, shows the files that you have retrieved from a prior backup. They, too, are not available for backup.
  • Hovering the pointer over a category displays the number of files in the category.

In the Content Gauge for your My Book drive, the Additional Files category includes all of the files shown in the used space portion of your drive properties. This space is not available for backups.

Note: The small number of files that are shown in the Additional Files category when you first install the WD SmartWare software—before performing your first backup—represents the system and hidden files that your computer's operating system put there when you installed the drive.

Using the WD SmartWare Icon

After you have installed the WD SmartWare Software, the WD SmartWare icon displays in the bar at the top-right corner of the screen:

Thu 1:53 PM

By clicking the icon, you can:

• Open the WD SmartWare software
• Check the drive status
  • Safely dismount the drive

The following sections describe how to use the icon and other ways to do these things.

Opening the WD SmartWare Software

If the WD SmartWare software does not start automatically, you can restart it by:

- Clicking the WD SmartWare icon and selecting Open WD SmartWare:

About WD SmartWare... My Book Essential Open WD SmartWare...

- Double-clicking WD SmartWare in the Applications list:

Applications Name Date Modified Size Kind iMovie Dec 28, 2009, 10:10 AM 244.3 MB Application iPhoto Dec 28, 2009, 10:10 AM 410.3 MB Application iEuro Dec 28, 2009, 10:10 AM 36.9 MB Application iTunes Dec 28, 2009, 10:10 AM 171.3 MB Application iWeb Dec 28, 2009, 10:10 AM 51.8 MB Application iMail Dec 28, 2009, 10:10 AM 289.3 MB Application iPhone Booth Dec 28, 2009, 10:10 AM 16.6 MB Application Precision Dec 28, 2009, 10:10 AM 70.3 MB Application QuickTime Player Dec 28, 2009, 10:10 AM 29.8 MB Application Safert Dec 28, 2009, 10:10 AM 123.8 MB Application Spares Dec 28, 2009, 10:10 AM 404 KB Application Strikejet-Jan 14, 2009, 4:56 AM 8.5 MB Application Systems Preferences Dec 28, 2009, 10:10 AM 1.3 MB Application TestEdit-Jan 14, 2009, 4:56 AM 22.1 MB Application Time Machine Dec 28, 2009, 10:10 AM 452 KB Application Utilities-Dec 28, 2009, 10:10 AM — Folder WD SmartWare-Apr-23, 2010; 15:47 AM 37.7 MB Application WD SmartWare Uncontroller Todaya, 9:32 AM 9.7 MB Application

Checking Drive Status

Use the WD SmartWare icon to determine whether the drive is locked (encrypted), how full the drive is, the drive's serial number, and the temperature condition of the drive:

1. Click the WD SmartWare icon to display a list of drives and select the My Book drive:

Mon 10:50 AM About WD SmartWare S/N: WCAV5D460418 My Book.Essential Space Available: 100% Drive is not encrypted Open WD SmartWare... Unmount Volumes Mount CD Temperature Condition:OK

1. If the drive is unlocked (not encrypted), the submenu displays the serial number of the drive, the space available, and the temperature condition.

If the drive is locked:

About WD SmartWare S/N: WCAV90181775 Unlock to See Space Available Unlock Drive Unmount Volumes Unmount CD Temperature Condition:OK My Book Essential Open WD SmartWare...

a. Click Unlock Drive on the submenu to display the WD SmartWare Drive Unlock screen:

WD SmartWare Drive Unlock Unlock My Book Essential Enter your password to unlock your drive. Password Name: My Book Essential Serial: WCAV5018(1773) Size: 500.1 GB Password hint Edit Next >

b. Type your Password in the Password box.

c. At the Your drive is now unlocked prompt, click Exit to close the WD SmartWare Drive Unlock screen.

d. Repeat step 1 to see the drive status.

Safely Dismounting the Drive

You can safely dismount the drive using either the:

• WD SmartWare icon
• My Book icon
• Drive power button

CAUTION! To prevent data loss, close all active windows and applications before shutting down or removing the drive.

Using the WD SmartWare Icon

To safely dismount the drive using the WD SmartWare icon:

1. Click the WD SmartWare icon to display a list of drives.
2. Select the My Book drive, and then on the submenu, select Unmount Volumes:

Mon 11:50 AM About WD SmartWare S/N: WCAV5D460418 My Book Essential Space Available: 100% Open WD SmartWare... Drive is not encrypted Unmount Volumes Mount CD Temperature Condition:OK

If the drive has more than one volume, a prompt asks you to select the volume. You might hear the drive power down.

1. Wait for the drive icon to disappear from the desktop before disconnecting the drive from the computer.

Using the My Book Icon

To safely dismount the drive using the My Book icon:

1. Right- or control-click the My Book icon on the desktop and click Eject "MY BOOK" where "MY BOOK" is the name you assigned to the volume when you reformatted the drive for use on a Mac computer:

Open Eject "MY BOOK" Get Info Duplicate Make Alias Copy "MY BOOK" Clean Up Selection Label: × More

You might hear the drive power down.

1. Wait for the drive icon to disappear from the desktop before disconnecting the drive from the computer.

Using the Drive Power Button

To safely dismount the drive using the drive power button:

1. Press the power button on the back of the My Book drive.

You might hear the drive power down.

1. Wait until the drive icon to disappear from the desktop before disconnecting the drive from the computer.

Unlocking the Drive

After you have created a password to keep others from accessing the files on your drive, you will have to type your password to unlock the drive whenever:

• You shut down and restart your computer
  • You disconnect and reconnect the drive to your computer
• Your computer exits the sleep mode

You will have to do this even if you do not have the WD SmartWare software installed on your computer.

Unlocking the Drive with the WD SmartWare Software

The procedure for unlocking your drive with the WD SmartWare software can be automatic or manual, depending on whether the Please provide your password prompt appears or not.

Automatically. Whenever you shut down and restart your computer, or disconnect and reconnect the drive to your computer, the WD SmartWare software displays the WD SmartWare drive unlock screen:

WD SmartWare Unlock My Book Essential To continue, your My Book Essential drive must be unlocked Please provide your password. Password ▶ Password fun Cancel Unlock

To unlock your drive:

1. Type your password in the Password box.
2. Click Unlock to unlock your drive and enable the WD SmartWare software.

Manually. If your computer goes into sleep mode, an unlock screen might not display when you reactivate it. To unlock the drive, you can use either the:

• WD Unlocker VCD as described in "Unlocking the Drive Without the WD SmartWare Software" on page 55
• My Book icon

To unlock the drive manually, using the WD SmartWare icon:

1. Click the WD SmartWare icon in the bar at the top-right corner of the screen.
2. Select the My Book drive and then click Unlock Drive:

About WD SmartWare S/N: WCAV90181775 Unlock to See Space Available Open WD SmartWare... Unlock Drive Unmount Volumes Unmount CD Temperature Condition:OK

1. Type your password in the Password box and click Unlock on the WD SmartWare Drive Unlock utility screen:

WD SmartWare Drive Unlock Unlock My Book Essential Enter your password to unlock your drive. Password: I ▶ Password here! Name: My Book Essential Sens: WCAV90181775 Size: 500.1 GB Exit Unlock

1. At the Your drive is now unlocked prompt, click Exit to close the WD SmartWare Drive Unlock utility screen.

Unlocking the Drive Without the WD SmartWare Software

Whenever you connect your password-protected drive to a computer that does not have the WD SmartWare software installed, you can use the WD SmartWare Drive Unlock utility to unlock the drive there. The WD SmartWare software provides the Drive Unlock utility on a “virtual” CD drive (VCD) that appears on your desktop whenever the drive is locked:

WD Unlocker

To unlock the drive without the WD SmartWare software installed:

1. Double-click the WD Unlocker VCD icon and double-click the Drive Unlock icon on the screen that appears:

WD Unlocker DriveUnlock.app Extras

1. Type your password in the Password box and click Unlock on the WD SmartWare drive unlock screen:

WD SmartWare Unlock My Book Essential To continue, your My Book Essential drive must be unlocked. Please provide your passacont. Password ! ► Password lost Cancel Unlock

Uninstalling WD SmartWare Software

Important: You can easily uninstall the WD SmartWare software. However, you will need to restart the backup job manually after reinstalling the software as uninstalling deletes all existing backup job configurations. (See "Backing Up Your Computer Files" on page 16.)

To uninstall the WD SmartWare software:

1. Double-click the My Book icon on the desktop or WD SmartWare in the Applications list and double-click the Extras folder on the screen that displays:

MY BOOK Extris User Manuals WD SmartWare.app

1. Double-click the WD SmartWare Uninstaller icon:

WD +TURBO Installer.app WD SmartWare Developer.app

1. Click Uninstall on the WD SmartWare Uninstall screen:

WD SmartWare Uninstall Would you like to uninstall WD SmartWare ? Add Unsell

Troubleshooting

This chapter includes the following topics:

Installing, Partitioning, and Formatting the Drive Frequently Asked Questions

If you have problems installing or using this product, refer to this troubleshooting section or visit our support website at support.wdc.com and search our knowledge base for more help.

Installing, Partitioning, and Formatting the Drive

How to Answer ID

■ Install, partition, and format the drive in Windows XP and Vista 207, 3322
■ Install, partition, and format the drive to Mac OS X 10.4.11 and 10.5+ 287, 3323
■ Reformat from Mac GPT to Windows XP NTFS 3645
■ Reformat the drive from Mac GPT to Windows Vista NTFS format 3647
- Obtain and reinstall the original software included with this product 1425
■ Format the drive to the FAT32 file system* 1364
■ Use the drive on a Mac and a PC simultaneously 291

*The FAT32 file system has a maximum individual file size of 4 GB and cannot create partitions larger than 32 GB in Windows; however, Windows users can overcome these file size limitations by formatting the drive to NTFS using the Disk Management utility. See answer ID 1287 at support.wdc.com and article IDs 314463 and 184006 at support.microsoft.com for further details. To create partitions larger than 32 GB in FAT32 when reformatting the drive, download the External USB/FireWire FAT32 Formatting Utility from support.wdc.com/download.

Frequently Asked Questions

Q: How do I determine whether or not my system supports USB 3.0 or USB 2.0?

A: Refer to your USB card documentation or contact your USB card manufacturer.

Note: If your USB 3.0 or USB 2.0 controller is built in to the system motherboard, be sure to install the appropriate chipset support for your motherboard. Refer to your motherboard or system manual for more information.

Q: What happens when a USB 3.0 or USB 2.0 device is plugged into a USB 1.1 port or hub?

A: USB 3.0 and USB 2.0 are backward-compatible with USB 1.1. When connected to a USB 1.1 port or hub, a USB 3.0 or USB 2.0 device operates at the USB 1.1 full speed of up to 12 Mbps.

If your system includes a PCI Express slot, you can achieve Super-Speed USB transfer rates by installing a PCI Express adapter card. Contact the card manufacturer for installation procedures and more information.

Q: Why is the data transfer rate slow?

A: Your system may be operating at USB 1.1 speeds due to an incorrect driver installation of the USB 3.0 or USB 2.0 adapter card or a system that does not support USB 3,0 or USB 2.0.

Note: If an additional external drive is connected to the WD product, USB bandwidth is shared and may affect performance.

Q: Why does the drive not power up?

A: Be sure the drive is plugged in to a power source. A special cable may be needed for computers with limited bus power. For more information in the U.S., visit our website at store.westerndigital.com. Outside the U.S., contact WD Technical Support in your region.

Q: Why is the drive not recognized under My Computer or on the computer desktop?

A: If your system has a USB 3.0 or USB 2.0 PCI adapter card, be sure that its drivers are installed before connecting your WD USB 3.0 external storage product. The drive is not recognized correctly unless USB 3.0 or USB 2.0 root hub and host controller drivers are installed. Contact the adapter card manufacturer for installation procedures.

Q: Why won't my computer boot when I connect my USB drive to the computer before booting?

A: Depending on your system configuration, your computer may attempt to boot from your WD portable USB drive. Refer to your system's motherboard BIOS setting documentation to disable this feature or visit support.wdc.com and see Knowledge Base answer ID 1201. For more information about booting from external drives, refer to your system documentation or contact your system manufacturer.

A

Installing the SES Driver

If you decide to not install the WD SmartWare software, you must have an SES driver installed on computers running Windows to keep the hardware popup wizard from displaying every time you connect your My Book drive to your computer.

Note: The SES Driver is installed automatically when you install the WD SmartWare software or if you clicked Do Not Install on the Welcome to WD SmartWare screen (see "Getting Started Without the WD SmartWare Software" on page 15).

This appendix includes the following topics:

Installing on Windows XP Computers Installing on Windows Vista Computers Installing on Windows 7 Computers

Installing on Windows XP Computers

After you physically connect the drive as shown in Figure 4 on page 6, the Found New Hardware Wizard screen displays.

Note: If Autoplay is enabled, two additional screens might appear at the same time as the Found New Hardware Wizard screen. If they appear, close them.

You can use the Found New Hardware Wizard to install the SES driver either:

• Automatically, if your computer is connected to the Internet
- Manually, whether your computer is connected to the Internet or not

Installing the Driver Automatically

To install the SES driver automatically, your computer must be connected to the Internet:

1. Verify that your computer is connected to the Internet.
2. On the Found New Hardware Wizard screen, select Yes this time only to allow Windows XP to connect to Windows Update:

Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on your computer, on the hardware installation CD, or on the Windows Update Web site (with your permission). Read our privacy policy Can Windows connect to Windows Update to search for software? ● Yes, this time only! ○ Yes, now and every time I connect a device ○ No, not this time! Click Next to continue. < Back Next > Cancel

1. Click Next to continue.

4. Select Install the software automatically and click Next:

Found New Hardware Wizard This wizard helps you install software for WD SES Device USB Device If your hardware came with an installation CD or floppy disk, insert it now. What do you want the wizard to do? ○ Install the software automatically (Recommended) ○ Install from a list or specific location (Advanced) Click Next to continue < Back Next > Cancel

5. When the installation completes, click Finish:

Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for WD SES Device Click Finish to close the wizard.

Installing the Driver Manually

If your computer is not connected to the Internet, install the driver manually:

1. On the Found New Hardware Wizard screen, select No, not this time to inhibit a connection attempt to Windows Update:

Found New Hardware Wizard Welcome to the Found New Hardware Wizard Windows will search for current and updated software by looking on your computer, on the hardware installation CD, or on the Windows Update Web site (with your permission). Read our privacy policy Can Windows connect to Windows Update to search for software? Yes, this time only Yes, now and every time I connect a device No, not this time Click Next to continue < Back Next > Cancel

1. Click Next to continue.
2. Select Install from a list or specific location and click Next:

Found New Hardware Wizard This wizard helps you install software for: WD SES Device USB Device If your hardware came with an installation CD or floppy disk, insert it now. What do you want the wizard to do? ○ Install the software automatically (Recommended) ● Install from a list or specific location (Advanced) Click Next to continue. < Back Next > Cancel

1. Browse to My Computer and:

a. Double-click the My Book drive.
b. Double-click the Extras folder.
c. Select WD SES Device Driver.

d. Click Next:

Found New Hardware Wizard Please choose your search and installation options. Search for the best driver in these locations. Use the check boxes below to limit or expand the default search, which includes local paths and removable media. The best driver found will be installed. Search removable media (floppy, CD-ROM...) Include this location in the search: D:\extras\WD SES Device Driver Browse Don't search. I will choose the driver to install. Choose this option to select the device driver from a list. Windows does not guarantee that the driver you choose will be the best match for your hardware. < Back Next > Cancel

1. When the installation completes, click Finish:
   

Found New Hardware Wizard Completing the Found New Hardware Wizard The wizard has finished installing the software for WD SES Device Click Finish to close the wizard. i Back Finish Cancel

Installing on Windows Vista Computers

After you physically connect the drive as shown in Figure 4 on page 6, the Found New Hardware screen displays.

Note: If Autoplay is enabled, two additional screens might appear at the same time as the Found New Hardware screen. If they appear, close them.

You can use the Found New Hardware screen to install the SES driver either:

• Automatically, if your computer is connected to the Internet
• Manually, whether your computer is connected to the Internet or not

Installing the Driver Automatically

To install the SES driver automatically, your computer must be connected to the Internet:

1. Verify that your computer is connected to the Internet.
2. On the Found New Hardware wizard screen, click Locate and install driver software:

Found New Hardware Windows needs to install driver software for your WD SES Device USB Device Locate and install driver software (recommended) Windows will guide you through the process of installing driver software for your device. Ask me again later Windows will ask again the next time you plug in your device or log on. Don't show this message again for this device Your device will not function until you install driver software. Cancel

1. On the Found New Hardware - WD SES Device wizard screen, click Yes, search online this time only to allow Windows Vista to connect to Windows Update:

Found New Hardware - WD SES Device Allow Windows to search online for driver software for your WD SES Device? • Yes, always search online (recommended) Windows will automatically search for the latest drivers and applications for your hardware and download them to your computer. • Don't search online Your device may not function properly until you get the latest software. Please read Microsoft's privacy statement Cancel

Windows Vista automatically:

• Connects to Windows Update
  • Finds, downloads, and installs the SES driver

Installing the Driver Manually

If your computer is not connected to the Internet, install the driver manually:

1. On the Found New Hardware wizard screen, click Locate and install driver software:

Found New Hardware Windows needs to install driver software for your WD SES Device USB Device Locate and install driver software (recommended) Windows will guide you through the process of installing driver software for your device. Ask me again later Windows will ask again the next time you plug in your device or log on. Don't show this message again for this device Your device will not function until you install driver software. Cancel

1. On the Found New Hardware - WD SES Device wizard screen, click Don't search online:

Found New Hardware - WD SES Device Allow Windows to search online for driver software for your WD SES Device? • Yes, always search online (recommended) Windows will automatically search for the latest drivers and applications for your hardware and download them to your computer. • Yes, search online this time only Windows will search for the latest drivers and applications for this device and download them to your computer. • Don't search online Your device may not function properly until you get the latest software. Please check Microsoft's privacy statement Cancel

1. At the Install the disc that came with your WD SES Device prompt, click I don't have the disc. Show me other options:

Found New Hardware - WD SES Device Insert the disc that came with your WD SES Device If you have the disc that came with your device, insert it now... Windows will automatically search the disc for driver software. + I don't have the disc. Show me other options. Next Cancel

4. Browse to Computer and:

a. Double-click the My Book drive.
b. Double-click the Extras folder.
c. Select WD SES Device Driver.
d. Click Next:

Found New Hardware - VID SES Device Browse for driver software on your computer Search for driver software in this location: Suboptimal VLD SES Cover Browse... ✓ Include subfolders Next Cancel

5. When the installation completes, click Close:

Found New Hardware - WD SES Device The software for this device has been successfully installed. Windows has finished installing the driver software for this device. WD SES Device Close

Installing on Windows 7 Computers

After you physically connect the drive as shown in Figure 4 on page 6, use the Windows 7 Computer Management utility to install the SES driver:

1. Open All Programs and click Computer > Manage:

Getting Started Paint Windows Media Center Calculator Sticky Notes Snipping Tool Remote Desktop Connection Magnifier Solitaire All Programs Search programs and files Administrator Documents Pictures Music Games Computer Control Panel Devices and Print Default Programs Help and Support Open Manage Map network drive... Disconnect network drive... Show on Desktop Rename Properties Shut down

2. Under Computer Management (Local), click Device Manager > Unknown Device and right-click Update driver software:

Computer Management File Action View Help Computer Management (Local System Tools Task Scheduler Event Viewer Shared Folders Local Users and Groups Performance Device Manager Storage Disk Management Services and Applications WIN7-32 Computer Disk drives Display adapters DVD/CD-ROM drives Human Interface Devices IDE ATA/ATAPI controllers IEEE 1394 Bus host controllers Keyboards Mice and other pointing devices Monitors Network adapters Other devices Unknown device Ports (COM & LP) Processors Sound, video and System devices Universal Serial B Update Driver Software... Disable Uninstall Scan for hardware changes Properties Actions Device Manager More Actions Launches the Update Driver Software Wizard for the selected device.

3. Click Browse my computer for driver software.

Update Driver Software - Unknown Device How do you want to search for driver software? Search automatically for updated driver software Windows will search your computer and the Internet for the latest driver software for your device, unless you've disabled this feature in your device installation settings. Browse My Computer for Driver Software Locate and install driver software manually. Cancel

4. Browse to Computer, double-click the My Book drive, double-click the Extras folder, and select WD SES Device Driver:

Update Driver Software - Unknown Device Browse for driver software on your computer Search for driver software in this location: C:\Users\HDD\MS Device Drive Include subfolders Let me pick from a list of device drivers on my computer This list will show installed driver software compatible with the device, and all driver software in the same category as the device. Next Cancel

1. Click Next.
2. When the installation completes, click Close:

Update Driver Software - WD SES Device Windows has successfully updated your driver software Windows has finished installing the driver software for this device: WD SES Device Close

Compliance and Warranty Information

This appendix includes the following topics:

Regulatory Compliance

Environmental Compliance (China)

Warranty Information

Regulatory Compliance

FCC Class B Information

This device has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. Any changes or modifications not expressly approved by WD could void the user's authority to operate this equipment.

ICES/NMB-003 Compliance

This device complies with Canadian ICES-003 Class B.

Safety Compliance

Approved for US and Canada. CAN/CSA-C22.2 No. 60950-1, UL 60950-1: Safety of Information Technology Equipment.

This product is intended to be supplied by a listed limited power source, double insulated, or direct plug-in power unit marked “Class 2.”

CE Compliance For Europe

Marking by the CE symbol indicates compliance of this system to the applicable Council Directives of the European Union, including the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC). A “Declaration of Conformity” in accordance with the applicable directives has been made and is on file at Western Digital Europe.

GS Mark (Germany only)

Machine noise - regulation 3. GPSGV: Unless declared otherwise, the highest level of sound pressure from this product is 70db(A) or less, per EN ISO 7779.

KCC Notice (Republic of Korea only)

Class B Device 1 Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas.

Environmental Compliance (China)

Warranty Information

Obtaining Service

WD values your business and always attempts to provide you the very best of service. If this Product requires maintenance, either contact the dealer from whom you originally purchased the Product or visit our product support website at support.wdc.com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, prepaid and insured, to the address provided on your return paperwork. Your original box and packaging materials should be kept for storing or shipping your WD product. To conclusively establish the period of warranty, check the warranty expiration (serial number required) via support.wdc.com. WD shall have no liability for lost data regardless of the cause, recovery of lost data, or data contained in any Product placed in its possession.

Limited Warranty

WD warrants that the Product, in the course of its normal use, will for the term defined below, be free from defects in material and workmanship and will conform to WD's specification therefor. The term of your limited warranty depends on the country in which your Product was purchased. The term of your limited warranty is for 2 years in the North, South and Central America region, 2 years in the Europe, the Middle East and Africa region, and 3 years in the Asia Pacific region, unless otherwise required by law. The term of your limited warranty period shall commence on the purchase date appearing on your purchase receipt. WD shall have no liability for any Product returned if WD determines that the Product was stolen from WD or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external enclosures, unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope of the applicable instructions, as found at support.wdc.com), accident or mishandling while in the possession of someone other than WD. Subject to the limitations specified above, your sole and exclusive warranty shall be, during the period of warranty specified above and at WD's option, the repair or replacement of the Product.

The foregoing limited warranty is WD's sole warranty and is applicable only to products sold as new. The remedies provided herein are in lieu of a) any and all other remedies and warranties, whether expressed, implied or statutory, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and b) any and all obligations and liabilities of WD for damages including, but not limited to accidental, consequential, or special damages, or any financial loss, lost profits or expenses, or lost data arising out of or in connection with the purchase, use, or performance of the Product, even if WD has been advised of the possibility of such damages. In the United States, some states do not allow exclusion or limitations of incidental or consequential damages, so the limitations above may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Index

A

Accessories, optional 2

Alerts, flashing icon 33

B

Backup

about backing up files 16

files content box 19

procedure 18, 19

Box contents 2

C

CAUTION

about erasing the drive 38

about lost passwords 27

about preventing data loss when dis- connecting 33, 52

about your unlocked drive 28

China RoHS 69

Compatibility with operating systems 3

Compliance, regulatory 68

Connecting the drive 6

Converting drive format 44, 57

Creating a password 27

D

Disconnecting the drive 33

Disk image, downloading and restoring 41, 44

Documents file category 13

Drive

connecting 6

diagnostics and status checks 42

disconnecting from a PC 33

dismounting from a Mac 52

dismounting VCD from a Mac 56

handling precautions 5

sleep timer 37

Drive Settings

drive eraser 38

file history 34

registration 37

security 27

sleep timer 37

E

Environmental compliance, China 69

Erase Drive screen 38, 40

Erasing the drive 38

CAUTION about erasing the drive 38

F

FAQs

USBs 57

FCC Class B information 68

File

categories, defined 13, 17

history, drive setting 34

history, screen 21

Flashing icon alerts 33

Formatting the drive 57

Front and back views 3

Full Media Scan 42

H

Handling precautions 5

Hardware 2

|

ICES/NMB-003 compliance 68

K

Kensington security slot 5

Kit contents 2

L

Launching WD SmartWare software

on the Mac 50

on Windows 32

Limited warranty 70

M

Mac

dismounting VCD from 56

drive serial number 56

reformatting the drive to 44

restarting WD SmartWare software on 50

safely dismounting drive from 52

status check 56

uninstalling software from 56

unlocking the drive manually 56

Mail file category, defined 13, 17

Movies file category, defined 13, 17

Music file category, defined 13, 17

N

NTFS format 3, 44

0

Operating system requirements 3

Operating systems 3

Other file category, defined 13, 17

P

Password protecting your drive 27 CAUTION about lost passwords 27

Physical description 3

Pictures file category, defined 13, 17

Power button 4, 53

Precautions for handling the drive 5

Preferences options, setting 35

Preferences software setting 34

Product features 1

Product registration 5

Q

Quick Diagnostic Self-test 42

R

Reformatting the drive 44

Register Drive screen 37

Registering your drive 37

Registration, online 5

Regulatory compliance 68

Requirements, operating systems 3

Restarting the software on Windows 32

Restoring the software disk image 41, 44

Retrieve

about retrieving files 23

folder, software setting 34

folder, specifying 34

procedure 23, 26

RoHS 69

Run Diagnostics screen 42

s

Safety compliance 68

Serial number on a Mac 56

Service 69

Set

preferences screen 35

retrieve folder screen 34

sleep timer screen 37

Setting the drive sleep timer 37

SMART Status Check 42

Software Settings

preferences 34, 35

retrieve folder 34

system throttling 34

Space available

on a Mac 56

on Windows 32

Settings

See Drive Settings

Status check 32

on a Mac 56

on Windows 32

System

file category defined 50

file category, defined 13, 18

throttling software setting 34

System compatibility 3

T

Temperature check 32

U

UL 68

Underwriters Laboratories Inc. 68

Uninstalling WD SmartWare

from a Mac 56

from Windows 40

Unlocking the drive

with the WD SmartWare software 53

without the WD SmartWare software 55

Unlocking the drive from the virtual CD

on a Mac 33

on Windows 33

USB drive interface 4

V

Virtual CD

unlocking the drive from 55

W

Warranty 69

WD service 69

WD SmartWare icon

Windows 32

WD SmartWare software

uninstalling from a Mac 56

Windows

status check 32

uninstalling WD SmartWare software from 40

unlocking the drive from the virtual CD 29

Information furnished by WD is believed to be accurate and reliable; however, no responsibility is assumed by WD for its use nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of WD. WD reserves the right to change specifications at any time without notice.

Western Digital, WD, the WD logo, My Book, and My Passport are registered trademarks and My Passport Essential, WD SmartWare, and Data Lifeguard are trademarks of Western Digital Technologies, Inc. Other marks may be mentioned herein that belong to other companies.

© 2010 Western Digital Technologies, Inc. All rights reserved.

Western Digital

20511 Lake Forest Drive

Lake Forest, California 92630 U.S.A.

4779-705019-A03 Aug 2010