ADG 555 IX - Dishwasher WHIRLPOOL - Free user manual and instructions

USER MANUAL ADG 555 IX WHIRLPOOL

Technical line drawing of an open multi-chamber kitchen appliance with visible dish arrangement and wheels (no text or labels)

Read this Manual

DearCustomer,

Please carefully read this manual before using the dishwasher, it will help you to use and maintain the dishwasher properly.
- Keepittorefertoitatalaterdate.
■ Passitonto any subsequent owner of the appliance.

This manual contains sections on safety Instructions, Operating Instructions, Installation Instructions and Troubleshooting Tips, etc.

Before Calling for Service

To review the section on troubleshooting Tips will help you to solve some common problems by yourself.
If you can not solve the problems by yourself, please ask for the help of professional technicians.

NOTE:

The manufacturer, following a policy of constant development and updating of the product, may make modifications without giving prior notice.

1) Safety Information....1
2) Disposal....2
3) Operating Instructions....3 Control Panel....3 Dishwasher Features....3

4) Prior using for the first time....4
A、Water Softener....4
B、Loading the Salt into the Softener....5
C、Fill the Rinse Aid Dispenser....5
D、Function of Detergent 6
Howtousethe3in1function....8

5) Loading the Dishwasher Basket....9 Attention before or after loading the Dishwasher Baskets....9
Loading the upper Basket....9
Loading the Lower Basket....10
Cutlery Basket....11

6) Starting a washing programme....12
Wash Cycle Table....12
Turning on the Appliance....13
Change the Programme....13
Atthe Endofthe WashCycle....13

7) Maintenance and cleaning....14
Filtering System....14
Caring for the Dishwasher....15

8) Installation instruction....16
Please carefully read the installation instruction 16
Aesthetic panel's dimensions and installation....17
Tension adjustment of the door spring....19
Connection of drain hoses....19
Dishwasherinstallationsteps....20
About Electricity Connecting....21
WaterConnection....22

9) Troubleshooting Tips....23
Before calling for service....23
Technical information....25

1. IMPORTANT SAFETY INFORMATION READ ALL OF THE INSTRUCTIONS BEFORE USING

WARNING!

When using your dishwasher, follow the precautions listed below:

GROUNDING INSTRUCTIONS

Thisappliancemustbegrounded. Intheeventofa malfunctionorbreakdown, groundingwillreduce theriskofanelectricshockbyprovidingapathof leastresistanceofelectriccurrent. Thisappliance isequippedwithacordhavinganequipment-groundingconductorandagroundingplug.
Theplugmustbepluggedintoanappropriateoutlet thatisinstalledandgroundedinaccordancewith allocalcodesandordinances.

▲ WARNING!

■ Improperconnectionoftheequipment-grounding conductorcanresultintheriskofanelectricshock.
■ Checkwithaqualifiedelectricianorservice representativeifyouareindoubtwhetherthe applianceisproperlygrounded.Donotmodifythe plugprovidedwiththeappliance;Ifitdoesnotfit theoutlet.Haveaproperoutletinstalledbya qualifiedelectrician.

WARNING! PROPER USE

■ Donotabuse, siton, or standard the door or dish rack of the dish washer.
■ Donotoperateyourdishwasherunlessall enclosurepanelsareproperlyinplace.Open thedoorverycarefullyifthedishwasheris operating,thereisariskofwatersquirtingout.
■ Donotplaceanyheavyobjectsthe onorstandon doorwhenitisopen. The appliance could tip forward.
■ When loading items to be washed: 1) Locatesharpitems so that they are not likely to damagethedoorseal; 2) Warning: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.
■ When using your dishwasher, you should prevent plastic items from coming into contact with the heating element. (This instruction is only applicable to machines with a visual heating element.)
- Check that the detergent compartment is empty after completion of the wash cycle.
■ Donotwashplasticitemsunlesstheyaremarked dishwashersafeortheequivalent.Forplasticitems notsomarked,checkthemanufacturer's recommendations.
■ Use only detergent and rinse additives designed for an automatic dishwasher.
■ Never use soap, laundry detergent, or hand washing detergent in your dishwasher. Keep these products out of the reach of children.

• Keepchildrenawayfromdetergentandrinseaid,keep childrenawayfromtheopendoorofthedishwasher,therecouldstillbesomedetergentleftinside.
  This appliance is not intended for use by persons (including children with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  ■ Childrenshouldbesupervisedtoensurethattheydo notplaywiththeappliance.
  ■ Dishwasher detergents are strongly alkaline, they can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.
  ■ The door should not be left open, since this could increase the risk of tripping.
  If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
  ■ Removethedoortothewashingcompartmentwhen removinganolddishwasherfromserviceordiscardingit.
  ■ Please dispose of packing materials properly.
  ■ Usethedishwasheronlyforitsintendedfunction.
  ■ During installation, the powersupply must not be excessively or dangerously bent or flattened. Donottamperwithcontrols.
  The appliance is to be connected to the water mains using new hose sets and that old hose-sets should not bereused.
  ■ The maximum number of place settings to be washed is 9.
  ■ The maximum permissible inlet water pressure is 1 Mpa.
  ■ The minimum permissible inlet water pressure is 0.04Mpa.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY KEEP THESE INSTRUCTIONS

2.Disposal

Dispose of the dishwasher packaging material correctly.

All packaging materials can be recycled.

Plastic parts are marked with the standard international abbreviations:

■ PE——for polyethylene, e.g. sheet wrapping material
■ PSforpolystyrene, e.g. padding material
■ POM — polyoxymethylene, e.g. plastic clips
■ PP — polypropylene, e.g. Salt filler
■ ABS — Acrylonitrile Butadiene Styrene, e.g. Control Panel.

WARNING!

■ Packaging material could be dangerous for children!
For disposing of package and the appliance please go to a recycling centre. Therefore cut off the powersupplyable and makethedoorclosing device unusable.
■ Cardboard packaging is manufactured from recycled paper and should be disposed in the waste paper collection for recycling.
■ By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local city office and your household waste disposal service.

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

3. Operation Instruction

IMPORTANT To get the best performance from your dishwasher, read all operating instructions before using it for the first time.

ControlPanel

Whirlpool 1 2 3 4 5 6 7

1 3in1indicatorlight/3in1 function button: To select and show 3in1.
2 Delayindicatorlights: Toshowdelaywashingtime3hours, or6hours, or9hours.
3 Delay start button: To Press this button to set the delayed hours for washing up to 3 hours, or 6 hours, or 9 hours.
4 Program indicator lights and button: To select one of the seven and show the washing program.

5 Start and reset button: To start the selected washing program or reset the washing program when the machineisworking.
6 Salt and rinse aid warning lights: To show whenthesaltcontainerordispenserneedtobe refilled.
7 Powerindicatorlightandswitch: Toturnon/off andshowthepowersupply.

DishwasherFeatures

Frontview 1 2 3 4 5 6 7 8 9 10

1 UpperBasket
2 SprayArms
3 LowerBasket
4 SaltContainer
5 MainFilter
6 DetergentDispenser
7 Cup Shelf
8 CutleryBasket

BackView 11 13

9 CoarseFilter
10 RinseAidDispenser
11 Drainpipeconnector
12 Inletpipeconnector
13 Trayass

4.Prior using for the first time

Before using your dishwasher for the first time:

A Set the water softener
B Pour 1 / 2 litre of water inside the salt container and then fill with dishwasher salt
C Fill the rinse aid dispenser
D Fillindetergent

A. Water Softener

The water softener must be set manually, using the water hardness dial.

The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of the water used. This is intended to optimise and customise the level of salt consumption.

Circular diagram with a central symbol and directional arrows, no readable text or labels

Please follow the steps below for adjustment in salt consumption.

1. Unscrew the cap from the salt container.
2. There is a ring on the container with an arrow on it (see figure on the side), if necessary, rotate the ring in the anticlockwise direction from the "-" Setting toward the "+" sign, based on the hardness of the water being used. It is recommended that adjustments should be made in accordance with the following scheme:

WATERHARDNESS				SelectorPosition	Saltconsumption(gram/cycle)	Autonomy(cycles/1kgs)
dH	fH	Clarke	mmol/l
	0~140~80~	1.4 0~10		/	0	/
8~22	14~39	10~28	1.4~3.9	-	20	50
22~45	39~80	28~56	3.9~8	Mid	40	25
45~60	80~107	56~75	8~11	+	60	16

Note:1

^ dH=1.25 ^ Clarke=1.78 ^ fH=0.178mmol/l

^ DH: Germandegree

^° fH: Frenchdegree

"Clark: British degree

Note:2

"/"	Nosaltneedadded
"-"	Setting toward the"- " sign
"+"	Setting toward the "+ " sign
"Mid"	Setting toward between the"- "signand" +" sign

Contact your local water board for information on the hardness of your water supply.

B. Loading the Salt Into the Softener

Always use the salt intended for use with dishwasher.

The salt container is located beneath the lower basket and should be filled as explained in the following:

Attention!

■ Only use salt specifically designed for the use in dishwashers! Every other type of salt not specifically designed for the use in a dishwasher, especially table salt, will damage the water softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any damages caused.
■ Only fill with salt just before starting one of the complete washing programs. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

1 Open

Diagram of a mechanical device with a hand operating the top part, showing internal components like a cylinder and gear mechanism (no text or symbols)

A Remove the lower basket and then unscrew and remove the cap from the salt container. B Before the first wash, fill 1 lt. of water in the salt container of your machine.
C Place the end of the funnel (supplied) into the hole and introduce about 1kg of salt. It is normal for a small amount of water to come out of the salt container. 2
After filling the container, screw the cap tightly back clockwise. Usually, the salt warning light will stop being illuminated within 2-6 days after the salt container has been filled with salt.
F Immediately after filling the salt into the salt container, a washing program should be started (We suggest to use the soak or rapid program). Otherwise the filter system, pump or other important parts of the machinery may be damaged by salty water. This is out of warranty.

NOTE:

1. The salt container must only be refilled when the salt warning light in the control panel comes on. Depending on how well the salt dissolves, the salt warning light may still be on even though the saltcontainerisfilled.
   If there is no salt warning light in the control panel (for some Models), you can estimate when to fill the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive salt.

C. Fill the Rinse Aid Dispenser

RinseAidDispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 110ml.

FunctionofRinseAid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

Attention!

Only use branded rinse aid for dishwasher. Never fill their rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.

When to Refill the Rinse Aid Dispenser

If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour of the optical level indicator "C" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark. As the rinse-aid diminishes, the size of the dark dot decreases. You should never let the rinse aid level fall 1 / 4 full.

As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below. ● Full ● 3/4 full ● 1/2 full ○ 1/4 full - Should refill to eliminate spotting ○ Empty

Illustration of a hand holding a device with icons and a finger pointing at it (no text or symbols present)

Illustration of a cleaning tool with a bottle and a magnifying glass (no text or symbols)

Illustration of a hand holding a small electronic device with icons and a magnifying glass (no text or symbols)

1 To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2 Pour the rinse aid into the dispenser, being careful not to overfill.
3 Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

NOTE: Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming during the next wash. Don't forget to replace the cap before you close dishwasher door.

Adjusting Rinse Aid Dispenser

MAX 8 5 4 3 2 1 Adjustlever (Rinse) Increase Reduce

The rinse aid dispenser has six or four settings. Always start with the dispenser set on "4". If spots and poor drying are a problem, increase the amount of rinse aid dispensed by removing the dispenser lid and rotating the dial to "5". If the dishes still are not drying properly or are show spots, adjust the dial to the next higher lever until your dishes are spot-free. The recommended setting is "4". (Factoryvalueis"4".)

NOTE:

Increase the dose if there are drops of water or limespots on the dishes after washing. Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or knife blades.

D. Function of Detergent

Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher. Most of the commercial quality detergents are suitable for this purpose.

Detergents

Thereare3sortsofdetergents

1. With phosphate and with chlorine
2. With phosphate and without chlorine
3. Without phosphate and without chlorine

Normally new pulverised detergent is without phosphate. Thus the water softener function of phosphate is not given. In this case we recommend to fill salt in the salt container even when the hardness of water is only 6 °dH. If detergents without phosphate are used in the case of hard water often white spots appear on dishes and glasses. In this case please add more detergent to reach better results. Detergents without chlorine do only bleach a little. Strong and coloured spots will not be removed completely. In this case please choose a program with a higher temperature.

Concentrated Detergent

Based on their chemical composition, detergents can be split into two basic types:

■ conventional, alkaline detergents with caustic components
■ low alkaline concentrated detergents with natural enzymes

The use of formal washing programs in combination with concentrated detergents reduces pollution and is good for your dishes; these wash programs are specifically matched to the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reason “normal wash programs in which concentrated detergents are used can achieve the same results that can otherwise only be achieved using intensive programs.

Detergent Tablets

Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programs. Therefore please use long programs when using detergent tablets, to ensure the complete removal of detergent residuals.

Detergent Dispenser

The dispenser must be refilled before the start of each wash cycle following the instructions provided in the wash cycle table. Your dishwasher uses less detergent and rinse aid than Conventional dishwasher. Generally, only one tablespoon of detergent is needed for anormal wash load. More heavily soiled items need more detergent. Always add the detergent just before starting the dishwasher, otherwise it could get damp and will not dissolve properly.

AmountofDetergenttoUse

1 Push latch to open

2

NOTE:

If the lid is closed: press release button. The lid will spring open.
■ Always add the detergent just before starting each wash cycle.
■ Only use branded detergent aid for dishwasher.

WARNING!

Dishwasher detergent is corrosive! Take care to keep it out of reach of children.

ProperUseofDetergent

Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.

Don't put powdered detergent into the dispenser until you're ready to wash dishes.

Fillin Detergent

Fill the detergent dispenser with detergent. The marking indicates the dosing levels, as illustrated on the right:

A The place of main wash cycle detergent placed, "MIN" means approximately 20g of detergent.
B The place of pre-wash cycle detergent placed, approximately 5g of detergent

Please observe the manufacturers dosing and storage Recommendations as stated on the detergent packaging.

A B

Closethelidandpressuntilitlocksinplace.

If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase.

NOTE:

■ You find information about the amount of detergent for the single programme on the last page.
■ Please aware, that according to the level soiling and the specific hardness of water differences are possible.
■ Please observe the manufacturer's recommendations on the detergent packaging.

HowToUseThe3IN1Function

Your dishwasher has a 3in1 function which needs no salt and rinse aid but a 3In1 tablet. This dishwasher comes with a 3in1 tablet container as an accessory.

NOTE: Only the 3in1 function(for the program: intensive/Normal/Eco.) Can be used with 3in1 tablets. If you use 3in1 tablets in other programs, the appliance will not achieve a good performance.

1. The figure below shows how to hang the 3in1 tablet container on the upper basket.

Technical line drawing of a structural framework with grid and support components (no text or symbols)

1. Rotate the upper sprayer and change the location of the container to ensure the upper sprayer is not obstructed by the 3in 1 tablet container. Referto the figure below for reference.

Technical line drawing of a mechanical assembly with no visible text or symbols

1. Put the 3 in 1 tablet into the container, then start the 3 in 1 program.

NOTE:

When using 3in1 combination / compact Detergents, please pay attention to make sure that the size of the combination detergents fits to the dispenser, so that combination detergents can be easily put into the dispenser, and the dispenser would not be broken.

5. Loading the Dishwasher Basket

For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets and cutlery baskets may vary from your model.

Attentionbefore or after Loading the Dishwasher Baskets

Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans.

It is not necessary to rinse the dishes under running water.

Place objects in the dishwasher in following way:

1. Items such as cups, glasses, pots/pans, etc. are faced downwards.
2. Curved items, or ones with recesses, should be loaded aslant so that water can run off.
3. All utensils are stacked securely and cannot tip over.
4. All utensils are placed in the way that the spray arms can rotate freely during washing.

Very small items should not be washed in the dishwasher as they could easily fall out of the baskets.

Loading the Upper Rack

The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and saucers, as well as plates, small bowls and shallow pans (as long as they are nottoodirty).

Position the dishes and cookware so that they do not get moved by the spray of water.

BowlMBowlL( ) Cups) Gravyladle Glasses Front Dessertplate (Egg) Saucers

Adjusting the Upper Basket

The height of the upper basket can be adjusted in order to create more space for large utensils both for the upper/lower basket. The height of the upper basket can be adjusted by placing the wheels on different height of the rails. Long items, serving cutlery, salad servers and knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms.

The shelf can be folded back or be removed when not required for use.

Shelf Upperwheels Lowerwheels

Mechanical assembly diagram showing two views of a mechanical component with no visible text or symbols

LoadingtheLowerBasket

Werecommendthatyouplace largeitems which are most difficult to clean into the lower basket: pots, pans, lids, serving dishes and bowls, as shown in the figure to the right. It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking therotation of the topspray arm.

Pots, serving bowls, etc. must always be placed topdown.

Deep pots should be slanted to allow water to flow out.

The bottom basket feature fold down tine rows so that larger or more pots and pans can be loaded.

5 4 3 6 2 1 3 4 2

1. Cutlerybasket
2. Dessertplates
   3.Soupplates
3. Dinnerplates
   5.Ovalplatter
   6.Saucer

Close-up of a kitchen appliance with multiple plates and a central rack, showing no visible text or symbols.

Cutlery Basket

Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, the spoons should be loaded separately into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper basket as shown in the picture.

Isometric line drawing of a multi-story building with circular structures on top (no text or symbols)

3	5	5	3
1	5	5	1
3	5	5	3
3	5	5	3
1	5	6	1
3	2	1	3
3	2	4	4
1	2	4	4
2	2	4	4
2	2	1	4
1	2	1	4
7	2	7	4

1 2 3 4 5 6

1. Teaspoons
2. Dessertspoons
3. Soupspoons
4. Forks
5. Knives
6. Servingforks
7. Servingspoons

WARNING!

Do not leave any item extend through bottom. Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in an horizontal position.
■ Always load sharp utensils with the sharp pointdown!

For washing in the dishwasher the following cutlery/dishes

Are not suitable

Cutlerywithwooden,hornchinaor

mother-of-pearlhandles

Plastic items that are not heat resistant

Oldercutlerywithgluedpartsthatarenot

temperatureresistant

Bonded cutlery items or dishes

Pewterorcooperitems

Crystalglass

Steel items subject to rusting

Woodenplatters

Items made from synthetic fibres

Are of limited suitability

Some types of glasses can become dull after a large number of washes

Silver and aluminum parts have a tendency to discolour during washing

Glazed patterns may fade if machine washed frequently

NOTE:

Do not put in items that are dirty of cigarette ash, candle wax, lacquer or paint. If you buy new dishes please make sure that they are suitable for dishwashers.

NOTE:

Please do not overload your dishwasher. There is only space for 9 standard dishes. Do not use dish that is not suitable for dishwashers. This is important for good results and for reasonable energy consume.

Loading cutlery and dishes

Before loading the dishes, you should:

Remove large left-over

Soften remnants of burnt food in pans

When loading the dishes and cutlery, please note:

Dishes and cutlery must not impedether rotation of the spray arms

Load hollow items such as cups, glasses, pans etc. with the opening downwards so that water cannot collect in the container or a deep base

▲ WARNING!

It is dangerous to open the door when washing, because the hot water may be scaled to you.

6.Starting a washing program

WashCycleTable

NOTE:

■ (★) Meaning: need to fill rinse into the Rinse-Aid Dispenser.
*En50242: This program is the test cycle, the rinse-aid dispenser setting is recommended to be set to position 6.

Program	Cycle Selection Information	Description of Cycle	Detergent pre/main	Running time(min)	Energy (Kwh)	Water (l)	Rinse
Intensive	For the heaviest soiled loads, such as spots, pans, casserole dishes and dishesthathave been sitting with dried food on them for awhile.	Pre-wash (50°C)Pre-washWash (60 °C)RinseRinseRinse (70 °CDrying)	5/22g	173	1.4	18.4	[2C77]
Daily★EN50242	For normally soiled loads, such as plates, glasses and lightly soiled pans. Standard daily cycle.	Pre-washWash (50 °C)Rinse (60 °CDrying)	5/22g	171	0.81	13.0
Eco.	For lightly soiled loads, such as plates, glasses, bowls and lightly soiled pans.	Pre-washWash (45 °C)Rinse (60 °CDrying)	22g	111	0.7	11.0
Express	A shorter wash for lightly soiled loads that do not need drying.	Wash (40 °C)Rinse (45 °C)	15g	28	0.35	7.0
	For lightly soiled loads, such as glasses, crystal and fine china.	Pre-washWash (40 °C)Rinse (70 °CDrying)	15g	118	0.8	11.0
Pre -wash	Torins dishesthat you plan to wash later that day.	Pre-wash		11	0.01	6.0
	For the heaviest soiled loads, such as spots, pans, casserole dishes and dishesthathave been sitting with dried food on them for awhile.	Pre-wash (60°C)Wash (70 °CRinseRinseRinse (70 °CDrying)	3in1	161	1.5	15.1
Daily+3in1	For normally soiled loads, such as pots, plates, glasses and lightly soiled pans. standard daily cycle.	Pre-washWash (50 °CRinse (70 °CDrying)	3in1	148	1.0	12.7
Eco.3in1	For lightly soiled loads, such as plates, glasses, bowls and lightly soiled pans.	Pre-washWash (45 °CRinse (70 °CDrying)	3in1	128	0.8	12.7

Turning On the Appliance

Startingacyclewash

Draw out the lower and upper basket, load the dishes and push them back. It is commended to load the lower basket first, then the upper one (see the section entitled "Loading the Dishwasher").
■ Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
■ Close the door, press the ON/OFF button, and the ON/OFF light will turn on. Press the program button to select a desired wash cycle, After 3 seconds, the machine will work.

ChangetheProgram...

Premise:

A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the section entitled "Loading the Detergent").
When you press the start/reset button more than 3 seconds, you can cancel the running programme and select other programmes (see the section entitled "Starting a wash cycle...").
When you select Intensive/Normal/Eco.Programmes, you can select the 3in1 function.

NOTE: If you open the door during a wash cycle, the machine will pause. When you close the door, the machine continues until working after 10 seconds.

ForgottoAddaDish?

A forgotten dish can be added at any time before the detergent cup opens.

¶ Openthedooralittletostopthewashing.

3 Loadtheforgottendishes.

2 Afterthesprayarmsstopworking,youcanopenthedoor completely.

4! Closethedoor,thedishwasherwillstartrunningagain after 10 seconds.

At the End of the Wash Cycle

When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher. Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.

■ SwitchOfftheDishwasher

The program has ended, only if there appears a 0 in the digital display (remaining program time).

1. Switch off the dishwasher by pressing the ON/OFF button.

2. Turnoff the watertap!

■ Openthedoorcarefully.

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes before removing from the appliance.

Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they will be cooler and the drying will be improved.

■ Unloading the dishwasher

It is normal that the dishwasher is wet inside.

Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto the dishesinthelowerone.

WARNING!

It is dangerous to open the door when washing, because the hot water may scald you.

7. Maintenance and Cleaning

Filtering System

The filter prevents larger remnants of food or other objects from getting inside the pum. The residues may block the filter, in this case they must be removed.

2 1 3

The filter system consists of a coarse filter, a flat (Main filter) And a microfilter(Fine filter).

Mainfilter 1

Food and soil particles trapped in this filter are pulverized by a special jet on the lower spray arm and washed down to drain.

Coarsefilte 2

Larger items, such as pieces of bones or glass, that could block the drain are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and liftout.

Finefilter 3

Thisfilter holds soil and food residues in the sumparea and prevents it from being redeposit on the dishes during wash cycle.

Filterassembly

The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and cup under running water. To remove the filter device, pull the cup handle in the upward direction.

WARNING!

■ The dishwasher must never be used without the filters.
■ Improper replacement of the filter may reduce the performance level of the appliance and damaged dishes and utensils.

1

Open

Step 1: Turn the filter in anti-clockwise direction, thenliftitup.

2

Technical line drawing of a mechanical assembly with gears and a central shaft (no text or symbols)

Step 2: lift the Main filter up

3

Technical line drawing of a mechanical assembly with no visible text or symbols

Step 3: lift the Fine filter up

NOTE: When following this procedure from step1 to step 3, the filter system will be removed; when following it from Step 3 to Step 1, the filter system will be installed.

Remarks:

• Inspect the filters for blocking after every time the dishwasher has been used.
• By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters underrunning water.

NOTE: The entire filter assembly should be cleaned once a week.

Cleaning the Filter

To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figures on the last page and reinsert the entire assembly in the dishwasher, positioning it in its seat and pressing downwards.

WARNING!

When cleaning the filters, don't knock on them. Otherwise, the filters could be contorted and the performance of the dishwasher could be decreased.

CaringfortheDishwasher

The control panel can be cleaned by using a lightly dampened cloth.

After cleaning, make sure to dry it thoroughly.

For the exterior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Cleaning The Door

Diagram of a vehicle battery pack with a hand pointing to the side panel (no text or labels)

To clean the edge around the door, you should use only a soft warm, damp cloth. To avoid penetration of water into the door lock and electrical components, do not use aspraycleanerofanykind.

WARNING!

■ Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical components.
■ Abrasive agents or some paper towels should not be used because of the risk of scratching or leaving spots on the stainless steel surface.

ProtectAgainstFreezing

please take frost protection measures on the dishwasher in winter. Every time after washing cycles, please operate as follows :

1. Cutoff the electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to catch the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

NOTE: If your dishwasher cannot work because of the ice, please contact professional service persons.

CleaningtheSprayArms

It is necessary to clean the spray arms regularly in order to remove the accumulation of scale from the hard water and thus prevent blocking of spray arm jets and bearings.

We Suggest to poke the blocked spray arm jets with a needle to ensure good washing effect.

Unscrew

After Every Wash

After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odours are not trapped inside.

RemovethePlug

Before cleaning or performing maintenance, always remove the plug from the socket.

No Solvents or Abrasive Cleaning

Toclean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water an a little vinegar, or a cleaning product made specifically for dishwashers.

When not in Use for a Long Time

It is recommend that your run a washcycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly open. This will help the door seal to last longer and prevent odours from forming within the appliance.

MovingtheAppliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back.

Seals

One of the factors that cause odoursto form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring.

The installation of the pipes and electricalequipments should be done by professionals.

Electrical Shock Hazard Disconnect electrical power before installing dishwasher.

Failure todos o can result in deathor electrical shock.

- Installation preparation

The installation position of dishwashers should be near the existing inlet and drain hoses and power cord.

Oneside of the cabinetsink should be chosen to facilitate the connection of drain hoses of the dishwasher.

Note: please check the accompanying installation accessories (hook for aesthetic panel, screw)

Please carefully read the installation instruction.

Illustrations of cabinet dimensions and installation position of the dishwasher
Preparations should be made before moving the dishwasher to the installation place.
1 Choose a place near the sink to facilitate the installation of inlet and drain hoses (see figure 1).
2 If dishwasher is installed at the corner of the cabinet, there should be some space (illustrated in figure 2) when the door is opened.

【 】

Cabinetdimensions Less than 5mm between the top of dishwasher and cabinet and the outdoor aligned tocabinet.

Figure1 820mm 580mm 90° 90° Electrical, drain and water supply line entrances 80 100 Space between cabinet bottom and floor 450 mm

【 】

Minimumspacewhen thedoorisopened

Figure2

Dishwasher Door of dishwasher Cabinet Minimum space of 50nm

● Aestheticpanel's dimensions and installation

1 The aesthetic wooden panel could be processed according to the figure 3

Make a furniture door according to the diagram and not to exceed 4 kg.

19° φ2 φ8

【 】

The aesthetic panel should be processed in accordance with the illustrated dimensions

Figure3

442 418 465 276 392 316 30 506.5-587 The length of the panel should be within the range of 537--587mm, not more than 587mm.

(Unit: mm)

2 Install the hook on the aesthetic wooden panel and put the hook into the slot of the outer door of dishwasher(see figure 4a). After positioning of the panel, fix the panel onto the outer door by screwsandbolts(Seefigure4b).

【 】 Installation of aesthetic panel

Figure4a

e4a 1 2 1 2 1

【 】

Figure4b

Installation of aesthetic wooden panel

1.takeawaythecover
2. pinup thescrewsurely
3. getback the cover

Note: Ensure that the screws being used are not too long to go through the furniture door. Do not put additional screws through the dishwasher door into the furniture.

ST4.5 screw Cover Spacer for aesthetic panel ST4.5 screw Hook for aesthetic panel Outer door of dishwasher of Aesthetic panel

• Tensionadjustmentofthedoorspring

The door springs are set at the factory to the proper tension for the outer door. If aesthetic wooden panel are installed, you will have to adjust the doorspring tension. Rotate the adjusting screw to drive the adjustorto strain or relax the steel cable (see figure 5).

Door spring tension is correct when the door remains horizontal in the fully opened position yet rises to a close with the slight lift of a finger.

【 】 Tensionadjustment of the doorspring

f a relax Figure5

- Connectionofdrain hoses

Insert the drain hose into a drain pip with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the sp plasticsupport that comes with the appliance (figure 6). The free and of the hose must be at a height between 400 and 1000mm and must not be immersed in water to avoid the backflow of it. ATTENTION: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outsidethe drain.

【Figure6】

Drain pipe connection

PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B, C

Close the drain hose hook to the counter Drain hose hook Front Counter A B C MAX 1000mm MIN 400mm φ 40mm

- Dishwasher installation steps

1 Install the furniture doorto the outer door of the dishwasher using the brackets provided. Refer to the template for positioning of the brackets.

2 Adjust the tension of the doorsprings by using an Allen key turning in a clockwise motion to tighten the left and right doorsprings. Failure to do this could cause damage to your dishwasher (Illustration 2).

3Connecttheinlethoseto the cold watersupply.

4Connectthedrainhose. Refertodiagram.(Figure 6)

5Connectthepowercord.

6Affix the condensation strip under the worksurface of cabinet. Please ensure the condensation strip is flush with edge of worksurface.

7 Placethedishwasher into position.

8Levelthedishwasher. Therearfeetcanbeadjustedfromthefrontofthedishwasherbyturning thescrewsontheleftandrighthandsideofthecabinet(Illustration5A). Toadjustthefrontfeet, useawrenchandturnthefrontfeetuntilthedishwasherislevel(Illustration5B).

9The dishwasher must be secured in place. There are two ways to do this:

A. Normal worksurface-secure to the worksurface by using two woodscrews ensuring the dishwasher weight is not being hit by the surface (Illustration 6).

B. Marble or granite worktop-secure the bracket to the side panel of the dishwasher and secure the dishwasher to the furniture housing. Put the rubber cap over the screw (Illustration 7).

Condensation strip SCREW CONE GEAR 3M 5 5B Furniture door RUBBERCOVER SCREW

【 】

Figure 7

Dishwasher must be level for proper dish rack operation and wash performance.

1 Placelevelondoorandracktrackinsidethetubasshowntocheckthatthe dishwasherislevel.
2 levelthedishwasherbyadjustingthefourlevelinglegsindividually.
3 When level the dishwasher, please pay attention not to let the dishwashertipover.

【 】

Illustration of feet adjustment

NOTE:

The maximum adjustment height of the feet is 60 mm.

Check Level Front to Back Figure8 Check level side to side

About Electricity Connecting

For personal safety: ■ DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE. ■ DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING CONNECTION FROM THE POWER CORD.

Electrical Requirements

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply. Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving only this appliance.

Electrical Connection

⚠️ Insure proper ground exists before use

Ensure the voltage and frequency of the power being corresponds to those on the rating plate. Only insert the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the socket, rather than using a adaptors or the like as they could cause overheating and burns.

GROUNDING INSTRUCTIONS

This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is installed and earthed in accordance with all local standards and requirements.

▲ WARNING!

Improper connection of the equipment-grounding conductor can result in the risk of an electric shock. Check with a qualified electrician or servicerepresentative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it is not fit forthe outlet. Have a proper outlet installed by a qualified electrician.

▲ WARNING!

Inorderto avoid that there is more water staying in the inlethose, please close the hydranta after using. (Forthemodels: nosafety inlethose.)

Cold Water Connection

Hand holding a faucet with a handle, no text or symbols present

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or haven not been used for an extended period of time, let the waterrunt to make sure that the water is clear. This precaution is needed to avoid the risk of the water inlet to be blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the household hot water line (such as, centralsystem, heating system), as long as it does not exceed a temperature of 60^ C. In this case, the wash cycle time will be shortened by about 15 minutes and the washefficiency slightly reduced. The connection must be made to the hot water line following the same procedures as described in the section for the connection to the cold water line.

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned either to the right or the left sides to facilitate proper installation.

HowtoDrainExcessWaterFromHoses

If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained directly into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable container that is held outside and lower than the sink.

WaterOutlet

Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the water inlet hose is not kinked or squashed.

ExtensionHose

If you need a drain hose extension, make sure to use a similar drain hose. It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.

SyphonConnection

The waste connection must be at a height of between 50 cm (minimum) and 100 cm (maximum) from the bottom of the dish. The water drain hose should be fixed by a hose clip.

StartofDishwasher

The following things should be checked before starting the dishwasher.

1 The dishwasher is level and fixed properly
2Theinletvalveisopen
3 There is a leakage at the connections of the conducts
4The wires are tightly connected
5The power is switched on
6Theinletanddrainhosesareknotted
7All packing materials and printings should be taken out from the dishwasher

Attention: After installation, please make sure to keep this manual.

The content of this manual is very helpful to the users.

9.Troubleshooting Tips

Before Calling for Service

Review the charts on the following pages may save you from calling for service.

Technical problems	Problem	Possible Causes What To Do
	Dishwasher doesn't start	Fuseblown,orthe circuitbreakeracted	Replacefuseorresetcircuitbreaker.Removeanyother appliancessharingthesamecircuitwiththedishwasher
		Powersupplyisnot turnedon	Makesurethedishwasheristurnedonandthedooris closedsecurely.Makesurethepowercordisproperlypluggedinto the wallsocket.
		Errorcode:E1; Waterpressureislow	Checkthatthewatersupplyisconnectedproperlyand thewateristurnedon.
		Doorofdishwasher notproperlyclosed.	Makesuretoclosethedoorproperlyandlatchit.
	water not pumped form dishwasher	Kinkindrainhose	Checkdrainhose.
		Filterclogged	Checkcoarsethefilter"Clean(seeTearfordified)
		Kitchensinkclogged	Checkthekitchensinktomakesureitisdrainingwell.Iftheproblemisthekitchensinknotdraining,youmay needaplumberratherthanaservicemanfordishwashers.
General problems	Suds in the tub	Improperdetergent	Useonlythespecialdishwasherdetergenttoavoid suds.Ifthisoccurs,openthedishwasherandletsuds evaporate.Add1gallonofcoldwatertothetub.Close andlatchthedishwasher,thenStartthe"soak"wash cyletodrainoutthewater.Repeatifnecessary.
		Spilledrinse-aid	Alwayswipeuprinse-aidspillsimmediately.
	Stained tub interior	Detergentwith colourantwasused	Makesurethatthedetergentistheonewithout colourant.
	White film on inside surface	Hardwaterminerals	Tocleantheinterior,useadampspongewith dishwasherdetergentandwearrubbergloves.Neveruseanyothercleanerthandishwasher detergentfortheriskoffoamingorsuds.
	There are rust stains on cutlery	Theaffecteditemsare notcorrosionresistant.
		Aprogrammewasnot runafterdishwasher saltwasadded.Tracesofsalthave gottenintothewashcycle.	Alwaysrunthequickwashprogramme.withoutanycrockeryinthedishwasherand withoutselectingtheTurbofunction(ifpresent), afteraddingdishwashersalt.
		Thelidofthesofter isloose	Checkthelip.Ensurethefixisfine.
Noise	Knocking noise in the wash cabinet	As p ay a r m i s knockingagainst aniteminabasket	Interrupttheprogramme,andrearrangetheitems whichareobstructingthespayarm.r
	Rattling noise in the wash cabinet	Itemsofcrockery arelooseinthe washcabinet	Interrupttheprogramme, andrearrangetheitemsofcrockery.
	Knocking noise in the water pipes	Thismaybecaused byon-siteinstallation orthecross-sectionof thepiping.	Thishasnoinfluenceonthedishwasherfunction. ifindoubt,contactasuitablyqualifiedplumber.
	Problem	Possible Causes	What To Do
Unsatis-factory washing result	The dishes are not clean	Thedisheswerenot loadedcorrectly.	Seenotesin"LoadingtheDishwasherBaskets".
		Theprogrammewas notpowerfulenough.	Selectamoreintensiveprogramme.See"WashCycleTable."
		Notenoughdetergent wasdispensed.	Usemoredetergent,orchangeyourdetergent.
		Itemsareblocking thepathofsprayarms.	Rearrangetheitemssothatthespaycanrotatefreely.r
		Thefiltercombination in the base of wash cabinetisnotcleanor isnotcorrectlyfitted. Thismaycause thespayarmjets togetblocked.	Cleanand/orfitthefiltercombinationcorrectly.Cleanthespayarmjets.See"CleaningtheSpray Arms".
	Cloudiness on glassware	Combinationofsoft waterandtoomuch detergent.	Uselessdetergentifyouhavesoftwaterandselect ashortestcycletowashtheglasswareandtoget themclean.
	Black or gray marks on dishes	Aluminumutensils haverubbedagainst dishes.	Useamildabrasivecleanertoeliminateethosemarks.
	Detergent left in dispenser cups	Dishesblock detergentcups.	Re-loadingthedishesproperly.
Unsatis-factory drying result	The dishes are not drying	Improperloading	Loadthedishwasherassuggestedinthedirections.
		Toolittlerinse-aid	Increasetheamountofrinse-aid/refilltherinse-aid dispenser.
		Dishesareremoved toosoon	Donotemptyyourdishwasherimmediatelyafter washing.Openthedoorslightlysothatthesteamcan escape.Beginunloadingthedishwasheronlyoncet hedishesarebarelywarmtothetouch.Emptythelow basketfirst.Thispreventswaterformdroppingoff dishesintheupperbasket.
		Wrongprogram hasbeenselected	Inshortprogramthewashingtemperatureislower. Thisalsolowerscleaningperformance.Choose aprogramwithalongwashingtime.
		Useofcutlerywith alow-qualitycoating	Waterdrainageismoredifficultwiththeseitems.Cutleryordishesofthistypearenotsuitablefor washinginthedishwasher.

445 540 820 1145

Height:820mm(adjustable+60mm)
Width:445mm
Depth:540mm
VoltageconnectedLoad:seeratinglabel
Waterpressure:0.04-1.0MPa
Hotwaterconnection:max60°C
Powersupply:seeratinglabel
Capacity:9Placesettings