E960SWN - Monitor AOC - Free user manual and instructions

USER MANUAL E960SWN AOC

LCD Monitor User Manual

E960Swn

Line drawing of a computer monitor with a stand and abstract wave pattern on the screen (no text or symbols)

Safety....4

National Conventions 4

Power 5

Installation....6

Cleaning 7

Other 8

Setup 9

Contents in Box 9

Setup Stand & Base.... 10

Adjusting Viewing Angle.... 11

Connecting the Monitor....12

Wall Mounting 13

Adjusting 14

Setting Optimal Resolution 14

Windows Vista 14

Windows XP 16

Windows ME/2000 17

Hotkeys 18

OSD Setting 19

Luminance 20

Image Setup 22

Color Setup.... 24

Picture Boost 26

OSD Setup 28

Extra 30

Exit 33

LED Indicator 34

Driver 35

Monitor Driver 35

Windows 7 35

Windows Vista 39

Windows XP 41

Windows 2000 44

Windows ME....44

i-Menu 45

e-Saver 46

Screen+ 47

Troubleshoot 48

Specification 50

General Specification 50

Preset Display Modes....51

Pin Assignments 52

Plug and Play....52

Regulation 53

FCC Notice 53

WEEE Declaration 54

EPEAT Declaration 55

Service 56

Warranty Statement for Europe 56

Warranty Statement for North & South America (excluding Brazil) 58

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

⚠️ Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V \~, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer's instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the floor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:

Installed on the wall

11.7/8 inches 20cm 4 inches 10cm 4 inches 10cm Leave at least this space around the set. 4 inches 10cm

Installed with stand

11 7/8 inches 30cm 4 inches 10cm 4 inches 19cm Leave at least this space around the set. 4 inches 10cm

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.

! Please disconnect the power cord before cleaning the product.

H₂O No Dioxide

Simple line drawing of a computer monitor with a cable and a switch, no text or symbols present.

Illustration of a hand interacting with a screen showing curved lines and directional arrows (no text or symbols)

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Setup

Contents in Box

Monitor CD Manual Monitor Base Power Cable Audio Analog Cable DVI Cable

* Not all signal cables (Audio, Analog, DVI) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

Setup Stand & Base

Please setup or remove the base following the steps as below.

Setup:

3D rendering of a black mechanical component with a red arrow indicating a force or movement (no text or symbols)

Remove:

3D rendering of a black mechanical component with a red arrow indicating a downward motion (no text or symbols)

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference.

Hold the stand so you will not topple the monitor when you change the monitor's angle.

You are able to adjust the monitor's angle from -5° to 20°.

-5° 20°

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

AOC ① ②

1. Power
2. Analog (DB-15 VGA cable)

To protect equipment, always turn off the PC and LCD monitor before connecting.

1 Connect the power cable to the AC port on the back of the monitor.
2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port.
3 Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

Diagram illustrating the process of door lock mechanism, showing step-by-step assembly and component alignment.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps:

1 Remove the base.
2 Follow the manufacturer's instructions to assemble the wall mounting arm.
3 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.
4 Insert the 4 screws into the holes and tighten.
5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall.

Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC.

Adjusting

Setting Optimal Resolution

Windows Vista

For Windows Vista:

1 Click START.

2 Click CONTROL PANEL.

Microsoft Microsoft Express 1. coli Microsoft Teams Microsoft Teams Microsoft Excel Player Microsoft Excel Safety Microsoft Live Messenger Documents Microsoft Advertising System Microsoft Systems Adobe Photoshop CS2 Sears Command Prompter All Programs Open Start Default Panel Default Programs Help and Support

3 Click Appearance and Personalization.

Control Panel Help System and Maintenance Get installed with Windows Back up your instructions Security Check for weather. Check this computer's any details Allow a program through the Internet Windows Networks and Internet Use desktop keys and tools Blogs the sharing Hardware and Sound Play, CDs or other network components Files Windows Systems and Programs Change Network Programs User Accounts Add to remote user accounts Appearance and Personalization Change the appearance of banking store, apply a theme to create new to how completely. It contains the Best performance database. Click, Language, and Region Change language or other key methods Change language, imagey. Ease of Actions Set out Windows Computer settings Optimize cloud security Additional Options

4 Click Personalization

C:\Users\Forest\Software\Administration\Program Files Database Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease Disease

5 Click Display Settings.

Properties panel about the results glasses: 100% and 90% Use your color and color of colors. Use your color to match the color of the color. Change from colored backgrounds or colors in any one of your colors to render the colors. Current colors. Change your color used in color when it displayed. In terms of color, you can use your color as a separate color for your computer. If you have a color on the right. Apply: Change your color used in color when you can use your color to render the colors. Remove colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Close colors. Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects Change your color used in color when you can use your color to render the colors. Side effects: Change your shape: change my size: change my size (or size) or size (or size). The size is 25 inches, 30 inches, 40 inches, 50 inches, and 60 inches. The size is 25 inches, 30 inches, 40 inches, and 50 inches. The size is 25 inches, 30 inches, 40 inches, and 50 inches. The size is 25 inches, 30 inches, 40 inches, and 50 inches.

6 Set the resolution SLIDE-BAR to 1366 by 768.

Display Settings Monitor Drag the icons to match your monitors. Identify Monitors 1 (Multiple Monitors) on NVIDIA Before 6500 LE (Microsoft Corporation) Balance: Low High Colored: Highest (32 bit) How do not get the help diagram? Advanced Settings... OK Cancel Apply

Windows XP

For Windows XP:

1 Click START.

park Internet Internet Explorer E-mail Outlook Express HCT 10.0 Notepad Paint Windows Media Player MSN Explorer Windows Movie Maker All Programs My Documents My Recent Documents > My Pictures My Music My Computer Control Panel Printers and Faxes help and Support Search Run... Log Off Turn Off Computer start

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Click Appearance and Themes.

Control Panel File Edit View Favorites Tools Help Search Favorites Agencies Control Panel Control Panel Select to Control Panel Set All Settings Options Help and Support Pick a category Accessories and Devices Features and Other Hardware Change the appearance of desktop fans, apply a Time or power tool to your computer, or customers the Start, Next, and other. Networks Add or Improve Programs Audio, Drive, Language, and Embedded Options Smooth, Speech, and Audio Services Accessibility Options Performance and Maintenance

5 Double click DISPLAY.

App Store and Features Save Asks Tools Physical Resources High-Technical Top Account Features Head Indicators Display Search App Store and Features Pick a task... Change the computer's feature Change the default background Change the service space Change the service resources or pick a Control Panel icon Options Find options Change the application of your Outlook, such as the background, source server, cache, batch size, and server resources

6 Click SETTINGS.

7 Set the resolution SLIDE-BAR to 1366 by 768.

Display Properties Themes Desktop Screen Saver Appearance Settings Display: Plug and Play Monitor on 3D Prophet III Screen resolution More Less 1024 by 769 pixels Color quality Highest (32 bit) Troubleshoot... Advanced OK Cancel Apply

Windows ME/2000

For Windows ME/2000:

1 Click START.
2 Click SETTINGS.
3 Click CONTROL PANEL.
4 Double click DISPLAY.
5 Click SETTINGS.
6 Set the resolution SLIDE-BAR to 1366 by 768.

Hotkeys

Source/ Auto/Exit ECO(DCR)/< Volume (4:3 or wide)/> Menu/Enter Power

Power

Press the Power button to turn on/off the monitor.

Eco (DCR)/ <

Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. (Eco mode hot key may not be available in all models).

Volume (4 : 3 or wide) / >

When there is no OSD, Press Volume button to active volume adjustment bar, Press < or > to adjust volume(Only for the models with speakers)

Auto / Exit

When there is no OSD, press Auto/Source button to do auto configure.

Source hot key

When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to select the input source showed in the message bar, press Menu/Enter button to change to the source selected

OSD Setting

Basic and simple instruction on the control keys.

AOC

1) Press the MENU-button to activate the OSD window.
2) Press to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. press to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it.
3) Press to change the settings of the selected function. Press AUTO to exit. If you want to adjust any other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.

Notes:

1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to adjust.
3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.

Luminance

1

Image Setup Color Setup PictureBoost GDS Setup Extra Exit Comfort 80 Camera Camera 1 Brightness 50 DCR GE Extrude Standard AOC

Press MENU (Menu) to display menu.

2

Image Setup Door Setup Picture Boxer ODD Setup Extra Exit Command 80 Camera • Camera 1 Brightness 96 DGA • Off Exmode Standard AOC

Press to select

(Luminance), and press to enter.

3

AOC Image Settings Custom Settings Picture 8: Post GOS Settings Balance Set X Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance AOC

Press < or > to select submenu, and press MENU to enter.

4

AOC

Press < or > to adjust.

5

Image Setup Color Setup Picture Boost OBO Ratio Error ZoB Control Englishness Extr mode Standard AOC

Press AUTO to exit.

	Brightness 0-100 Backlight Adjustment
	Contrast 0-100 Contrast from Digital-register.
	Eco mode	Standard		Standard Mode
		Text		Text Mode
		Internet		Internet Mode
		Game		Game Mode
		Movie		Movie Mode
		Sports		Sports Mode
	Gamma	Gamma1		Adjust to Gamma1
		Gamma2 Adjust to Gamma 2
		Gamma3 Adjust to Gamma 3
	DCR	Off		Disable dynamic contrast ratio
		On		Enable dynamic contrast ratio

Image Setup

1

Image Setup Color/Preview Picture Scan RGB Setup Extra Fill Control 60 Customs • Default ? Brightness 50 OK • Off Elevation • Threshold AOC

Press

MENU

(Menu) to display menu.

2

Color Setup Picture Sound OED Setup Extra Exit Lightwave Chris M Position 40 Phano M Position 40 Starphone M

Press < or > to select

(Image Setup), and press to enter.

3

AOC Audio Cable Mode Audio Mode Audio Mode Audio Audio Mode Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio Audio AOC

Press to select submenu, and press MENU to enter.

4

Color/Color Photo/Adaptive RGB/Video Sigma Edit Locknote Photo Position Position Position AOC

Press < or > to adjust.

5

Image Color Setup PictureBound RGB Setup Extra Exit Luminance Clear 30 R. Position 30 Name 60 R. Position 50 Magnetoid 60 AOC

Press

AUTO to exit.

	Clock 0-100	Adjust picture Clock to reduce Vertical-Line noise.
	Phase	0-100	Adjust Picture Phase
	Sharpness 0-100	Adjust picture sharpness
	H.Position 0-100	Adjust the horizontal position of the picture.
	V.Position 0-100	Adjust the vertical position of the picture.

Color Setup

1

Image Setup Color Value Photo/Noise GND Setup Extra Exit Controls 80 Brightness 50 Current 20V Current 4 OFF Current 30V Current 4 OFF AOC

Press

MENU

(Menu) to display menu.

2

Photo Reset RGB Setup Edit Edit Lock/Reserve Image Setup Color Range: 4 Warm: 10 End: 0.6 RGB Mode: 0.6 Dress: 0.6 DCB Open: 0.6 Shout: 0.2 AOC

Press < or > to select

(Color Setup), and press to enter.

3

AOC DGR Name DGR Name DGR Ground Blue RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB 80

Press < or > to select submenu, and press MENU to enter.

4

AOC

Press < or > to adjust.

5

Picture Shift RGB Name Color Disk Lightning Image Settings Color Turn Zoom Red 10 DCB Media Ctrl Green 10 DCB Frame Ctrl Walk 10 AOC

Press

AUTO to exit.

	Color setup. Warm		Recall Warm Color Temperature from EEPROM.
	Normal		Recall Normal Color Temperature from EEPROM.
	Cool		Recall Cool Color Temperature from EEPROM.
	sRGB		Recall SRGB Color Temperature from EEPROM.
	User	Red Red Gain from Digital-register
		Green Green Gain Digital-register.
		Blue Blue Gain from Digital-register
	DCB Mode	Full Enhance on or off Disable or Enable Full Enhance Mode
		Nature Skin on or off Disable or Enable Nature Skin Mode
		Green Field on or off Disable or Enable Green Field Mode
		Sky-blue on or off Disable or Enable Sky-blue Mode
		AutoDetect on or off Disable or Enable AutoDetect Mode
	DCB Demo		On or off Disable or Enable Demo

Picture Boost

1

Image Setup Color/Trace Print/Scout OHD Setup Extra Set Control 80 Gamma Gamma 7 Brightness 60 20A Off Extens Standard AOC

Press

MENU

(Menu) to display menu.

2

AOC RGB Setup O3D Setup Size I/O1 Latencies Image Setup Color Setup Bright Frame 4 OFF 0 Distance 60 In Position 80 Frame Rate 14 Contrast 7.50 Y Position 80

Press < or > to select (Picture Boost), and press to enter.

3

AOC Cable Image Camera Link Car Control Image Edit Color Mode Photo Mode Appearance 30 31 Position 30 Flame Size 6x Control 61 57 Position 80

Press < or > to select submenu, and press MENU to enter.

4

AOC Video Split Audio Out Light Pulse Image Split Audio Filter Speed Split 10 Speed Mode 62 H Position 62 Control 62 V Position 62

Press < or > to adjust.

5

AOC RGB Setup Extra Exit Lockdown Image Setup Color Setup Bright Frames Off Brightness 50 R. Position 30 Frame Width 16 Cardinal 50 X. Position 90

Press
AUTO to exit.

	Frame Size	14-100 Adjust Frame Size
	Brightness 0-100 Adjust Frame Brightness
	Contrast 0-100 Adjust Frame Contrast
	H. position 0-100 Adjust Frame horizontal Position
	V.position 0-100 Adjust Frame vertical Position
	Bright Frame	on or off Disable or Enable Bright Frame

OSD Setup

1

AOC Control Brightness Controls Stage Setup Color/Window Picture Shock GND Debug Extra End Options 20% Options OK ✓

Press

MENU

(Menu) to display menu.

2

AOC Language Tenset Color Edit Latrence Image Setup Color Setup Picture Save Language Textset 120 N Position 5 Position 30 Transportation 25

Press < or > to select

(OSD Setup), and press MENU to enter.

3

AOC

Press

< or >

to select submenu, and press

MENU

to enter.

4

AOC

Press < or > to adjust.

5

AOC Bible BAR Latentano Image Setup Color Setup Picture Reset Language 4 English 5 H. Position 60 Temperature 25 Direction 120 v. Position 68

Press
AUTO to exit.

	H.Position 0-100		Adjust the h horizontal position of OSD
	V.Position 0-100 Adjust the vertical position of OSD
	Timeout 5-120 Adjust the OSD Timeout
	Transparence 0-100 Adjust the transparence of OSD
	Language		Select the OSD language

Extra

1

Image Setup Color Drop Picture/Boost Grid Drop Extra Exit Comfort Right Font Controls Standard AOC

Press MENU (Menu) to display menu.

2

Input Setled Auto Auto Config Yes DR Timer 10 Image Format DSC/CK Auto Auto Setup Auto Setup Image Format 4.5 DSC/CK Auto Auto Setup Auto Setup 4.5 DSC/CK Auto Auto Setup Auto Setup 4.5 DSC/CK Auto Auto Setup Auto Setup 4.5 DSC/CK Auto Auto Setup Auto Setup 4.5 DSC/CK Auto Auto Setup Auto Setup 4.5 DSC/CK Auto Auto Setup Auto Setup 4.5 DSC/CK Auto Auto Setup

Press < or > to select ✗ (Extra), and press to enter.

3

Auto Config Off Start AOC Image Ratio BSC (C) Reset 4:5 Yes No Frequency - 60Hz Frequency - 80Hz

Press < or > to select submenu, and press MENU to enter.

4

Auto Config Tal Clock Image Ratio ECC-CD Reset 0.3 Tal Up Pain/State: H2C (M 570001) M Frequency: 8000 M Frequency: 8000 AOC

Press < or > to adjust.

5

Signal Audio Setup Off Timer AOC Gill Lockframe Image Setup Center Setup Picture Reset OCD Setup Input/Select Auto Audio Setup Power Off Timer 20 Image Ratio 4.2 DSC ID Yes No Reputation: 100% (60 MHz) Frequency: 0.5 Hz Frequency Range AOC

Press
AUTO to exit.

	Input Select	Auto /Analog Select Input	Signal Source
	Auto Config yes or no Auto adjust the picture to default
	Off timer 0-24hrs Select DC off time
	Image Ratio wide or 4:3 Select wide or 4:3 format for display
	DDC-CI yes or no Turn ON/OFF DDC-CI Support
	Reset	Yes or no Reset the menu to default
	Information		Show the information of the main image and sub-image source

Exit

1

Image Setup Camera Setup Photo Setup Ctrl Setup Edit Edit Command: 30 Brightness: 30 Color Mode: Standard AOC

Press MENU (Menu) to display menu.

2

Conference Image Setup Color Setup Picture Setup OBS Setup Menu AOC

Press < or > to select

(Exit), and press to exit!

MENU

Exit Exit the main OSD

LED Indicator

Status

Full Power Mode

Active-off Mode

LED Color

Green

Orange

Two colored circles (green and orange) on a gray background, no text or symbols present.

Driver

Monitor Driver

Windows 7

1.Start Windows® 7

1. Click on the 'Start' button and then click on 'Control Panel'.

CyberLink PowerCinema Paint Windows Media Center Touch tool Getting Started Calculator Sticky Notes Snipping Tool Magnifier WinRAR All Programs + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + -

1. Click on the 'Display' icon.

Control Panel > All Existing Power Series Adjust your computer's settings Auto Tools Control Management Device Management Cost of Assets Cost HomeGroup Location and Other Services NVIDIA Control Panel Performance Information and Tools Programs and Features Networks and Ordering Connections System User Assets Windows Forward Administrative Tools Credential Manager Device Manager Forder Options Winning Options Mouse NVIDIA Pack3 Reinforcement Switch HCT Audio Manager Sound Forder PC Settings Windows Income Upgrade Allocation Update Auto Play Data and Time Device and Time Farms Internal Options Networks and Ordering Order Functional Controls Show and Show Functions Speech Recognition Texter and Start Menu Windows CardSpace Backup and Settings Default Programs Chrome Setting Record Adjustment Verification Area Bars Pin and Touch Power Options Relays and Language Logic Center Flashcheckbox1 Windows Offender

1. Ckick on the "Change display settings" button.

Make it easier to read what's on your screen You can change the size of text and other items on your screen by choosing one of these options. To temporarily enable just part of the screen, we the display is open. Name: 100% Page: Mobile - 12% defaults Larger - 150%

1. Click the "Advanced Settings" button.

Change the appearance of your display Drones: 1. Aviofo Default First Panel Resolution: 1900 x 8000 (approximulated) Orientation: Landscape Main based and other home target or location What necessary settings result in this? OK Cancel Apply

1. Click the "Monitor" tab and then click the "Properties" button.

Generic PnP Monitor and NVIDIA GeForce 9100M G Properties Adapter Monitor Troubleshoot Color Management GeForce 9100M G Monitor Type Generic PnP Monitor Properties Monitor Settings Screen refresh rate: 60 Hertz Hide modes that this monitor cannot display Clearing this screen brightness you can select ordinary mode that this model cannot always compact. This may be used to any other display monitor (not using desktops) Colors: True Color (32 bit) OK Cancel Apply

7. Click the "Driver" tab.

Generic PnP Monitor Properties General Driver Details Generic PnP Monitor Driver Provider Microsoft Driver Date 6/21/2006 Driver Version 6.1.7600.16385 Digital Signer Microsoft Windows Driver Details To view details about the driver files. Update Driver To update the driver software for this device Roll Back Driver If the device fails after updating the driver, roll back to the previously installed driver. Disable Disables the selected device Uninstall To uninstall the driver (Advanced) OK Cancel

1. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on "Update Driver... "and then click the "Browse my computer for driver software" button.

Update Driver Software - Generic Rail Monitor How do you want to search for driver software? → Search automatically for updated driver software Windows will search your computer and the Internet for the latest driver software for your device, unless you've disabled this feature in your device installation settings. → Browse my computer for driver software Locate and install driver software manually. Cancel

1. Select "Let me pick from a list of device drivers on my computer".

Update Driver Software - Generic PrGP Monitor Browse for driver software on your computer Search for driver software in this location: #1.2 drivers touch devices Browse... Include subfolders Let me pick from a list of device drivers on my computer This list will show installed driver software compatible with the device, and all driver software in the same category as the device. Next Cancel

1. Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).

Update Driver Software - Generic PnP Monitor Select the device driver you want to install for this hardware. Select the manufacturer and model of your hardware device and then give Next. If you Install From Disk Insert the manufacturer's installation disk, and then make sure that the correct drive is selected below. OK Cancel Copy manufacturer's files from F:\Drivers\e936V#.\ Browse This driver is digitally signed. Have Disk... Tell me why driver signing is important Next Cancel

1. Select the "xxx.inf" file and click the "Open" button. Click the "OK" button.
2. Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk drive.
3. Close all open windows and remove the CD.
4. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Windows Vista

1. Click "Start" and "Control Panel". Then, double-click on "Appearance and Personalization".

Microsoft Microsoft Express 1. mini Microsoft Office Microsoft System Microsoft Office Manager Microsoft Phone Server Microsoft Live Mail Cameroon Download Microsoft Advertising System Microsoft System Adobe Photoshop CS2 Smartly Command Preview All Programs Edit View Document Systems Mac Games Search Recent Review Computer Network Download To: Create Panel Default Programs Help and Prepare

Control Panel 6 System and Maintenance Cellular with Windows Book your computer Security Check for questions Check this computer to verify details Show a program through Monitoring Formwork Network and Internet Show network (all out of basic data) or the following Hardware and Sound Play Linux to help media alternatives Show Show Programm Download a program Change herbal programs. User Accounts Add to remove user accounts Appearance and Personalization Change the apprexcion of Building Home, apply to the name or name menu to use complete, it is recommended for Debit menu configuration. Cook, Language, and Region Change Inphonics or other input methods Change sharing, language Ease of Apps Set Systems, support settings Describe email requests Additional Options

1. Click "Personalization" and then "Display Settings".

C:\Control Panel 3\Synthesis and Presentation System Properties Systems and Maintenance Security Networks and Networks Networks and Systems Services Hardware Agriculture and Proposition System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration System Configuration

Personalized Apparience and Accuracy gpraser: Cramatic Impairment Free leave the user and key of user behavior. User Behavior Choose Print & linkable background in which you can use any of your own problems to deliver the best access. Gross Users Change your content used in steps when it displays. A new user is a unique or targeted that covers your content and uses other computer resources and provides all rights. Access Change your content are based on how to be something from getting in each's analyzing your interface. Virtual Features Read a different measure profile. This can also change from this session's position inside being used as driving your activity. Change Change the name. You can change a wide range of user-based listening elements at varying levels of engagement in terms of story, history, geography, content, video, complete words, and message patterns. Active Features Select your user behavior, which change the user as more in their home (or if the user has some custom members have found help).

1. Click "Advanced Settings...".

Display Settings Honda Drag the icons to match your monitors. Identify Monitors 1 (Multiple Monitors) on NVIDIA GeForce 6800 LE (Microsoft Corporation) 2.30 by 9000000000000000000000000000000000000000000000000000000000000000000 Resolution: Low High 1,280 by 1024 pixels How do I get the best display? Colors: Highest (32 bit) Advanced Settings... OK Cancel Help

1. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is.

If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".

Generic PHP Monitor and NVIDIA GeForce 6000 LE (Microsoft Co... Adaptor Monitor Troubleshoot Color Management Monitor Type Generic PHP Monitor Properties Monitor Settings Screen refresh rate: 50 Hertz Hide modes that this monitor cannot display Clearing this checkbox allows you to select display modes that this monitor cannot display correctly. This may lead to an unusable display and/or damaged hardware. OK Cancel Help

User Account Control Windows needs your permission to continue. If you started this action, continue. Device Properties Microsoft Windows Details Continue Cancel User Account Control helps stop unauthorized changes to your computer.

1. Click "Update Driver..." in the "Driver" tab.

Generic PrGP Monitor Properties General Driver Details Generic PrGP Monitor Device type Monitor Manufacturer (Standard monitor types) Location,on NVIDIA GeForce 6000 LE (Microsoft Corp) Device status This device is working property. OK Cancel

Generic Prof Monitor Properties General Driver Details Generic Prof Monitor Driver Provider Microsoft Driver Date 9/21/2006 Driver Version E/O 6000 16386 Digital Signer:microsoft windows Driver Details To value details about the driver files Update Driver... To update the driver software for this device. Back Forward Copy If the device fails after updating the driver, roll back to the previously installed drive. Options Disable the selected device Uninstall To uninstall the driver (Advanced) OK Cancel

1. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".

Update Drive Software - Cenatic PDF Monitor Browse for driver software on your computer Search for driver software at this location: Browse... ✓ Include additives Let me pick from a list of device drivers on my computer This list will show installed driver software compatible with the device, and all driver software in the same category as the device. Next Cancel

1. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:\Driver (CD-ROM Drive).
2. Select your monitor model and click on the 'Next' button.
3. Click "Close" → "Clos e" → "OK" → "OK" on the following screens displayed in sequence.

Windows XP

1. Start Windows® XP
2. Click on the 'Start' button and then click on 'Control Panel'.

park Internet Internet Explorer E-mail Outlook Express HCT 10.0 Notepad Paint Windows Media Player MSN Explorer Windows Movie Maker All Programs My Documents My Recent Documents > My Pictures My Music My Computer Control Panel Printers and Faxes Help and Support Search Run... Log Off Turn Off Computer start

1. Select and click on the category 'Appearance and Themes'

Control Panel File Edit View Favorites Tools Help Search Favorites Address Control Panel Control Panel Switch to Class Data New Office Database Browser Organized Support Pick a category Applications and Discounts Features and Other Features Change the appearance of publishing tools, apply a theme or special server to your computer, or customize the Start, turning and listbox. Add to Business Programs Baby, Tree, Language, and Environmental Options Smooth, Speech, and Audio Services Accessibility Options Performance and Performance

1. Click on the 'Display' Item.

App Store and Options Save Asks Helps New Productset New Account Provider Trade & Diversities Delete Save App Store and Options Pick a task... Change the computer's Options Change the Desktop Background Change the new server Change the new session or pick a Control Panel icon Delete File Tools Change the appearance of your desktop, such as the system, screen user, icons, hot icons, and screen members.

1. Select the 'Settings' tab then click on the 'Advanced' button.

Display Properties Themes Desktop Screen Save Appearance Settings Display: Plug and Play Monitor on 3D Prophet III Screen resolution More Less 1024 by 769 pixels Color quality Highest (32 bit) Troubleshoot Advanced OK Cancel Apply

1. Select 'Monitor' tab

- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.

- If the 'Properties' button is active, click on 'Properties' button.

Please follow the steps below.

Plug and Play Monitor and 3D Prophet III Properties GeForce3 Device Selection Color Correction General Adapter Monitor Troubleshoot Color Management Monitor type Plug and Play Monitor Properties Monitor settings Screen refresh rate: 60 Hertz Hide modes that this monitor cannot display Clearing this check box allows you to select display modes that this monitor cannot display correctly. This may lead to an unusable display and/or damaged hardware. OK Cancel Apply

1. Click on the 'Driver' tab and then click on 'Update Driver...' button.

Plug and Play Monitor Properties General Driver Plug and Play Monitor Device type: Monitors Manufacturer: (Standard monitor types) Location:,on 3D Prophet III Device status This device is working properly. If you are having problems with this device, click Troubleshoot to start the troubleshooter. Troubleshoot... Device usage: Use this device (enable) OK Cancel

Plug and Play Monitor Properties General Driver Plug and Play Monitor Driver Provider: Microsoft Driver Date: 6/6/2001 Driver Version: 5.1.2001.0 Digital Signer: Microsoft Windows XP Publisher Driver Details... To view details about the driver files. Update Driver... To update the driver for this device. Roll Back Driver If the device fails after updating the driver, roll back to the previously installed driver. Uninstall To uninstall the driver (Advanced). OK Cancel

1. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.

Hardware Update Wizard Welcome to the Hardware Update Wizard This wizard helps you install software for: Plug and Play Monitor If your hardware come with an installation CD or floppy disk, insert it now. What do you want the wizard to do? ○ Install the software automatically (Recommended) ● Install Iron a list or specific location (Advanced) Click Next to continue. < Back Next > Cancel

1. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.

Hardware Update Wizard Please choose your search and installation options. ○ Search for the best driver in these locations. Use the check boxes below to limit or expand the default search, which includes local paths and removable media. The best driver found will be installed. ✓ Search removable media (Kopy, CD-ROM...) ☐ Include this location in the search. A/S Browse ○ Don't search. I will choose the driver to install. Choose this option to select the device driver from a list. Windows does not guarantee that the driver you choose will be the best match for your hardware. < Back Next > Cancel

1. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive).

Hardware Update Wizard Select the device driver you want to install for this hardware. Select the manufacturer and model of your hardware device and then click Next. If you have a disk that contains the driver you want to install, click Have Disk. Show compatible hardware Model Plug and Play Monitor This driver is digitally signed. Tell me why driver signing is important Have Disk... < Back Next > Cancel

1. Click on the 'Open' button, then click the 'OK' button.
2. Select your monitor model and click on the 'Next' button.
3. If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message, please click on the 'Continue Anyway' button.
4. Click on the 'Finish' button then the 'Close' button.
5. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.

Windows 2000

1. Start Windows® 2000
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' Icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select 'Monitor'
6. If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
7. If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.
8. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
9. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'.
10. Click on the 'Browse...' button then select the appropriate drive F: (CD-ROM Drive).
11. Click on the 'Open' button, then click on the 'OK' button.
12. Select your monitor model and click on the 'Next' button.
13. Click on the 'Finish' button then the 'Close' button.
    If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.

Windows ME

1. Start Windows® Me
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' Icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select the 'Monitor' button, then click on 'Change...' button.
6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk...'.
8. Click on the 'Browse...' button, select the appropriate drive F: (CD-ROM Drive) then click on the 'OK' button.
9. Click on the 'OK' button, select your monitor model and click on the 'Next' button.
10. Click on 'Finish' button then the 'Close' button.

i-Menu

Welcome to "i-Menu" software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.

i-Menu Luminance Contrast 50 Brightness 50 Gamma Gamma 1 Eco Mode DCR

e-Saver

Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below).

Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation.

Under each of the four PC status, you may choose from the pull-down menu the desired time (in minutes) for your monitor to automatically shutdown. The example above illustrated:

1) The monitor will never shutdown when the PC is powered on.
2) The monitor will automatically shutdown 5 minutes after the PC is powered off.
3) The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode.
4) The monitor will automatically shutdown 20 minutes after the screen saver appears.

AOC When PC On Off Sleep Screen Saver Monitor Off Never After 5 minutes After 10 minutes After 20 minutes C-saver RESET

You can click "RESET" to set the e-Saver to its default settings like below.

AOC When PC On Off Sleep Screen Saver Monitor Off Never After 5 minutes After 10 minutes After 20 minutes C-saver RESET

Screen+

Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window. You only need to drag the window to a corresponding pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it.

×□□日□□□□

Troubleshoot

Problem & Question	Possible Solutions
Power LED Is Not ON	Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor.
No images on the screen	Is the power cord connected properly?Check the power cord connection and power supply.Is the cable connected correctly?(Connected using the D-sub cable)Check the DB-15 cable connection.(Connected using the DVI cable)Check the DVI cable connection.* DVI input is not available on every model.If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen.If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card.(Refer to the Setting the Optimal Resolution)If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.Can you see "Input Not Supported" on the screen?You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.Adjust the maximum resolution and frequency that the monitor can handle properly.Make sure the AOC Monitor Drivers are installed.
Picture Is Fuzzy & Has Ghosting Shadowing Problem	Adjust the Contrast and Brightness Controls.Press to auto adjust.Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back .
Picture Bounces, Flickers Or Wave Pattern Appears In The Picture	Move electrical devices that may cause electrical interference as far away from the monitor as possible.Use the maximum refresh rate your monitor is capable of at the resolution your are using.
Monitor Is Stuck In Active Off-Mode"	The Computer Power Switch should be in the ON position.The Computer Video Card should be snugly fitted in its slot.Make sure the monitor's video cable is properly connected to the computer.Inspect the monitor's video cable and make sure no pin is bent.Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED, GREEN, or BLUE)	Inspect the monitor's video cable and make sure that no pin is damaged.Make sure the monitor's video cable is properly connected to the computer.
Screen image is not centered or sized properly	Adjust H-Position and V-Position or press hot-key (AUTO).
Picture has color defects (white does not look white)	Adjust RGB color or select desired color temperature.
Horizontal or vertical disturbances on the screen	Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and FOCUS.Press to auto-adjust.

Specification

General Specification

Panel	Model name	E960SWN
	Driving system TFT Color LCD
	Viewable Image Size 47.1 cm diagonal
	Pixel pitch 0.10*RGB (H) mm x 0	30 (V) mm
	Video R, G, B Analog Interface
	Separate Sync. H/V TTL
	Display Color 16.7M Colors
	Dot Clock 90 MHz
Resolution	Horizontal scan range 30 kHz - 60 kHz
	Horizontal scan Size(Maximum)	430.4 mm
	Vertical scan range 50 Hz - 76 Hz
	Vertical scan Size(Maximum)	254.6 mm
	Optimal preset resolution 1366×7	68@60Hz
	Plug & Play	VESA DDC2B/CI
	Input Connector	D-Sub 15pin
	Input Video Signal	Analog: 0.7Vp-p(standard), 75 OHM, TMDS
	Power Source	100-240V~, 50/60Hz
	Power Consumption	Active < 23W(typical)
		Standby < 0.5 W
	Off timer	0-24 hrs
	Speakers
Physical Characteristics	Connector Type	15-pin Mini D-Sub
	Signal Cable Type	Detachable
	Dimensions & Weight:
	Height (with base)	346 mm
	Width	440 mm
	Depth	185 mm
	Weight (monitor only)	2.086kg
Environmental	Temperature:
	Operating	0° to 40°
	Non-Operating -25° to 55°
	Humidity:
	Operating	10% to 85% (non-condensing)
	Non-Operating 5% to 93% (non-condensing)
	Altitude:
	Operating 0~3658m (0~12000 ft)
	Non-Operating 0~12192m (0~40000 ft)

Preset Display Modes

STANDARD RESOLUTION		HORIZONTAL FREQUENCY(kHZ)	VERTICAL FREQUENCY(Hz)
VGA 640x480@60Hz 31.469 59.94
VGA 640x480@72Hz 37.861 72.809
VGA 640x480@75Hz 37.5 75
SVGA 800x600@56Hz 35.156 56.25
SVGA 800x600@60Hz 37.879 60.317
SVGA 800x600@72Hz 48.077 72.188
SVGA 800x600@75Hz 46.875 75
XGA	1024x768@60Hz	48.363	60.004
XGA	1024x768@70Hz	56.476	70.069
XGA	1024x768@75Hz	60.023	75.029
WXGA	1366x768@60Hz	47.712	60.015
WXGA	1366x768@60Hz	47.712	59.79
IBM-MODE DOS	720x400@70Hz	31.469	70.087
MAC MODE VGA	640x480@67Hz	35	66.667
MAC MODE VGA	832x624@75Hz	49.725	74.551

Pin Assignments

1 6 11 5 10 15

Pin Number 15-Pin Side of the Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 N.C.
5 Detect Cable
6 GND-R
7 GND-G
8 GND-B
9 +5V
10 Ground
11 N.C.
12 DDC-Serial data
13 H-sync
14 V-sync
15 DDC-Serial clock

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

Regulation

FCC Notice

FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTICE :

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to correct such interference.

WEEE Declaration

Disposal of Waste Equipment by Users in Private Household in the European Union.

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

WEEE/E-Waste declaration for India

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling in India, please visit the below web link.

www.aocindia.com/ewaste.php

EPEAT Declaration

epeat TM GOLD

EPEAT is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products.

AOC believes in protecting the environment.

With a key concern for the conservation of natural resources, as well as land II protection, AOC announces the launch of AOC monitor's packaging recycling program. This program is designed to help you discard of your monitor carton and Iler materials properly. If a local recycling center is not available, AOC will recycle the packaging material for you, including foam Iler and carton. AOC Display solution will only recycle AOC monitor packaging. Please refer to the following website address:

Only for North and South American, excluding Brazil:

http://us.aoc.com/about/environmental_impact

For Germany:

http://www.aoc-europe.com/en/service/tco.php

For Brazil:

http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134

Service

Warranty Statement for Europe

LIMITED THREE-YEAR WARRANTY*

AOC Color Monitors sold within Europe

AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) GmbH will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The defective products that are replaced become the property of AOC International (Europe) GmbH.

If the product appears to be defective, please contact your local dealer or refer to the warranty card when attached to the product.

Deliver the dated proof of purchase to the AOC Authorized Service Center. If you cannot deliver the product in person:

• Pack it in its original shipping container (or equivalent)
- Put the RMA number on the address label
- Put the RMA number on the shipping carton
• Insure it (or assume the risk of loss/damage during shipment)
• Pay all shipping charges

AOC International (Europe) GmbH is responsible neither for any damage or loss during inbound transport damage nor to inbound product that was not properly packaged.

AOC International (Europe) GmbH will pay the return shipping charges within one of the countries specified within this warranty statement. AOC International (Europe) GmbH is not responsible for any costs associated with the transportation of product across international borders. This includes the international border within the European Union.

* This limited warranty does not cover any losses or damages that occur as a result of
- Shipping or improper installation or maintenance
- Misuse
- Neglect
• Any cause other than ordinary commercial or industrial application
- Adjustment by non-authorized source
• Repair, modification, or installation of options or parts by anyone other than an AOC Authorized Service Center
- Improper environment
• Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other irregularities

This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.

AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF THE EUROPEAN UNION.

Information in this document is subject to change without notice.

For more details, please visit: http://www.aoc-europe.com/en/service/index.php

Warranty Statement for North & South America (excluding Brazil)

WARRANTY STATEMENT

for AOC Color Monitors

Including those Sold within North America as Specified

Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer purchase. During this period, EPI (EPI is the abbreviation of Envision Peripherals, Inc.) will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The parts or product that are replaced become the property of EPI.

In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center closest to your area. Deliver the dated proof of purchase to the EPI Authorized Service Center. If you cannot deliver the product in person:

• Pack it in its original shipping container (or equivalent)
• Put the RMA number on the address label
• Put the RMA number on the shipping carton
  • Insure it (or assume the risk of loss/damage during shipment)
  • Pay all shipping charges

EPI is not responsible for damage to inbound product that was not properly packaged.

EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is not responsible for any costs associated with the transportation of product across international borders. This includes the international borders of the countries within this warranty statements.

In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number [phone]. Or you can request an RMA Number online at www.aoc.com/na-warranty.

* This limited warranty does not cover any losses or damages that occur as a result of:

• Shipping or improper installation or maintenance
• Misuse
• Neglect
  • Any cause other than ordinary commercial or industrial application
• Adjustment by non-authorized source
  • Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center
• Improper environment
• Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities

This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. EPI' LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

In the United States of America, this limited warranty is only valid for Products purchased in the Continental United States, Alaska, and Hawaii.

Outside the United States of America, this limited warranty is only valid for Products purchased in Canada.

Information in this document is subject to change without notice.

For more details, please visit:

USA: http://us.aoc.com/support/find_service_center ARGENTINA: http://ar.aoc.com/support/find_service_center BOLIVIA: http://bo.aoc.com/support/find_service_center CHILE: http://cl.aoc.com/support/find_service_center COLOMBIA: http://co.aoc.com/support/find_service_center COSTA RICA: http://cr .aoc.com/support/find_service_center DOMINICAN REPUBLIC: http://do.aoc.com/support/find_service_center ECUADOR: http://ec.aoc.com/support/find_service_center EL SALVADOR: http://sv .aoc.com/support/find_service_center GUATEMALA: http://gt.aoc.com/support/find_service_center HONDURAS: http://hn.aoc.com/support/find_service_center NICARAGUA: http://ni.aoc.com/support/find_service_center PANAMA: http://pa.aoc.com/support/find_service_center PARAGUAY: http://py.aoc.com/support/find_service_center PERU: http://pe.aoc.com/support/find_service_center URUGUAY: http://pe.aoc.com/support/find_service_center VENEZUELA: http://ve.aoc.com/support/find_service_center IF COUNTRY NOT LISTED: http://latin.aoc .com/support/find_service_center

Only for AOC branded monitors sold within the continental United States.

All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time during the first three months, AOC will provide a replacement monitor within 72 hours after you are approved for our program. If your monitor qualifies for the EASE program, AOC will pay for freight both ways.

Step 1: Phone our TECH Department at 888.662.9888

Step 2: Fill out and return EASE registration forms by mail or fax.

Step 3: We will issue a Return Authorization Number upon verification into the program.

Step 4: A monitor will be advance shipped to your location.

Step 5: We will issue a UPS Call Tag to pick up the defective unit.

Step 6: Please review the following chart to see your EASE program qualifications.

WARRANTY PERIOD	COVERAGE AT NO CHARGE	CUSTOMER CHARGES
Within the first three months of purchase: Covered by EASE	- New AOC monitor- Call tag dispatched and return freight charges via UPS	- None*
Between 4 months – 1 Year - All Parts & Labor Including CRT Tube & LCD Panel		- UPS Return Freight to AOC
Between 1 Year - 3 Years: Covered by standard limited warranty	- Parts & Labor (excluding CRT Tube & LCD Panel)	- UPS Return Freight to AOC

*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit arriving at AOC's service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center.