Fusion2Go OTR - Signal Amplifier SureCall - Free user manual and instructions

USER MANUAL Fusion2Go OTR SureCall

Over-the-Road Truck Cell Signal Booster Designed for Large Vehicles

User Manual

Black rectangular electronic device with a cable, no visible text or symbols on the body

iISueCall LTE-A LTE-V CELLULAR PCS AWS POWER

Black cylindrical device with coiled cable and metallic end cap, against a green and white background (no text or symbols visible)

Thank you for purchasing SureCall's Fusion2Go OTR cell phone signal booster kit. Fusion2Go OTR provides seamless 5G/4G LTE connectivity for any vehicle.

If you have any questions during setup, please reach out to our US-based experienced support technicians:

• Call: 1-888-365-6283
• Email: [e-mail]

Table of Contents

How It Works....3

Package Contents....4

Before Installation 5

Step 1: Install the Outside Antenna....6

Step 2: Install the Inside Patch Antenna....7

Step 3: Place Booster and Connect Cables ......7

Step 4: Connect Power ....8

Verify Your System is Working 8

LED Indicators 8

Troubleshooting....9

Specifications....9

Antenna Kitting Information....10

Consumer Guidelines....12

Three-Year Product Warranty 13

How It Works

The SureCall Fusion2Go OTR is a high-performing bidirectional booster that enhances cellular signals for vehicles.

The Fusion2Go OTR works with two antennas:

• An inside antenna that communicates with your cell phone.
• An outside antenna that communicates with the cell tower.

Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna. When your phone transmits, the signal is sent to the inside antenna, and then sent to the cell tower via the outside antenna.

Outside Antenna Inside Antenna

Package Contents

• Unpack all package contents. For missing or damaged items, contact your reseller.
• Turn over the signal booster and record the model and serial number for reference:

Serial #:

Purchase Date:

- Keep the carton and packing material to store the product in case you need to return it. Your Fusion2Go OTR signal booster package includes the following items:

Outside antenna

Antenna mounting hardware

Mast extension (optional)

Booster

DC Power supply

In-vehicle patch antenna

Alternate antenna location ① ② ③ ④ ⑤

Before Installation

Select a location on your vehicle for the outside antenna. Multiple placement and height configurations are available to achieve the best configuration for your specific vehicle needs.

The antenna can be mounted on any truck, with or without an existing antenna mounting point. For vehicles without built-in mounting points, the antenna uses a 3/8 x 24 thread mount designed to accommodate many available 3rd party CB mounts.

A 2-clamp mounting bracket is provided for use on a mirror rail or other existing vehicle rails.

Additionally, an extension pole is also provided. Note, it is needed only to achieve the clearance requirements for the antenna specified below.

Thread glue is provided with the antenna. It should be applied at each threaded connection only after you have confirmed the proper height configuration as the glue will make the connection permanent.

Keep in mind, the antenna mounting location should:

(a) allow the antenna to extend above the metal cab (b) be at least 6 inches away from any windows (c) provide at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna.

A "soft installation" should first be performed by assembling the truck antenna (WITHOUT GLUE) and routing the cable through an open window. After completing the remaining installation steps and successful operation is verified, proceed with permanent installation.

32 in. height Truck antenna Cable Mast extension (optional) 16 in. height Cable exit adapter Spring base

Step 1: Install the Outside Antenna

Once you have determined the mounting location, assemble the antenna parts by routing the cable through the mast extension (if used) and through the cable exit adapter.

If using the provided mounting bracket, we recommend installing the spring base and mounting bracket before adding the remaining assembly.

Install mounting bracket

Secure bracket to vehicle rail as shown using provided hardware. Secure all four bolts in place and secure with a wrench.

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Secure the assembled antenna to the mounting bracket

Assemble the spring base and mounting bracket by placing the threads through the opening of the mounting bracket as shown in the illustration. Use the provided washers on the bottom side of the bracket opening then add the nut to bottom of the thread to secure in place.

Once complete, connect the assembled antenna and the spring base.

Route cable

Once the antenna installation is complete, route the antenna cable inside the vehicle. To hide the cable, Route cable from outside to the inside of the cabin under headliner and trim to the desired booster location on the floor of the vehicle.

If additional cable length is needed, optional 5 ft extension cable has been provided.

Note: The outside antenna must not be collocated or operating with any other antenna or booster.

Antenna Cable Mast extension (optional) Cable exit adapter Spring base Mounting bracket

Step 2: Install the Inside Patch Antenna

Identify a location for the inside antenna on or near your front dashboard that is

1. Within 2-3 feet of the typical cell phone location
2. At least 8 inches (20cm) from cellular devices and
3. At least 4 inches (10cm) from metal

Next, peel Velcro backing and apply to a clean dry surface in your chosen location.

SAR-100

Step 3: Place Booster and Connect Cables

Select a well-ventilated location for the booster that is away from excessive heat, direct sunlight, and moisture. We often suggest installing beneath a seat or within the front console.

Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside patch antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable.

OUTSIDE LTEA LTE-V CELLULAR PCS AWS TO Outside Antenna INSIDE To Inside Patch Antenna

Step 4: Connect Power

Once antenna connections are complete, connect the DC power cord connector to the signal booster. The Power LED on the signal booster will illuminate to indicate it is receiving power and is ready for use.

Verify Your System is Working

Place a call in a location where you previously experienced poor cell service and confirm that your phone is receiving a boosted signal.

Normal operation is indicated by Green LEDs (flashing or solid). In the event Red LEDs appear, antenna adjustments may be needed. Review the following potential causes:

- Verify the two antennas have sufficient separation/isolation from the other another.

- Verify the outside antenna has sufficient clearance above any metal objects and has at least 12 inch radius from other radiating elements, such as a radio antenna.

- Consider: Resolving the issue may require moving the outside antenna further from the vehicle cabin and/or increasing the vertical placement of the outside antenna. If you have not used the optional mast extension, try adding it to achieve additional separation.

LED Indicators

Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated by Green LEDs (both flashing and solid). In the event Red LEDs appear, antenna adjustments may be needed.

Color	Condition	Indication
Green Solid	Indicates normal operation.
Green Flashing	Normal operation. Indicates that Automatic Gain Control (AGC) is self-adjusting due to over-signal or antenna proximity.
Red Flashing	Indicates issues caused by overpowering or oscillation.Adjustment of your outside antenna placement is likely needed. Verify that it has sufficient separation from the inside antenna, as well as, any potentially interfering objects or antennas

Note that the booster case may become warm during operation. This is normal.

Troubleshooting

Problem	Resolution
Signal booster has no power	1. Verify that the Power LED is ON.2. Connect the power supply to an alternate power source.3. Verify that the power source is operational and the fuse is intact.4. If it remains OFF, contact tech support at: 1-888-365-6283 or [e-mail]
After completing installation, signal has not Improved	Verify that cable connections are tightly fitted to the booster.Try further separating the antennas. i Note: Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold a call.

Specifications

Product Fusion2Go OTR
Uplink Frequency Range (MHz):	698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755
Downlink Frequency Range (MHz):	728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155
Supported Standards:	CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Maximum Gain: 50 dB
Input / Output Impedance: 50 Ω
Gain Adjustment: 20 dB (Automatic)
Maximum Uplink Power 29.0 dBm
Noise Figure: ≤ 5 dB
VWSR: ≤ 2.0
Maximum Output Power: 1 Watt EIRP
Cable: SC-174 / RG-58U
RF Connectors: FME Male (both ends)
Power Consumption: ≤ 10W
Operation Temperature:	-4° to +158° F
Dimensions:	5.625 x 4 x 1.125 inches
Weight:	1.43 lbs
Certification:	FCC ID: RSNF2GO3 (Fusion2Go 3.0)
	IC: 7784A-F2GO3 (Fusion2Go 3.0 v2)

Note: The term "IC" before the radio certification number only signifies that Industry Canada technical specifications were met.

Antenna Kitting Information

Component Prod No.	Description	Gain
		LTE-A LTE-V 800 MHz 1900 MHz				1700 MHz / 2100 MHz
Vehicle
Outdoor Antenna and Cable	SC-203WN and RG-58U (17 ft)	1.3 dB 1.2 dB	1.0 dB 1.6 dB	1.7 / 1.1 dB
Outdoor Antenna and Cable	SC-208W and SC174-12.5 ft (12.5 ft)	-3.16 dB -5.15 dB	-5.65 dB	-2.85 dB -3.34 dB / NG
Outdoor Antenna and Cable	SC200W and SC174-10 ft (10 ft)	-2.3 dB -2.3 dB	-2.3 dB	-5.8 dB	-3.98 / -5.96 dB
Indoor Antenna and Cable	SC110W and SC174-10 ft (10 ft)	-2.7 dB	-2.7 dB	-3.2 dB	-5.8 dB	-3.98 / -5.96 dB

*All equivalent antennas and cables are suitable for use with the Fusion2Go 3.0

Component	Prod No. Description	Gain
		LTE-A	LTE-V	800 MHz 1900 MHz		1700 MHz / 2100 MHz
Marine
Outdoor Antenna and Cable	SC288W or Galaxy 5412-P and SC240-40FN (40 ft)	-0.52 dB	-0.52 dB	-0.98 dB	-2.52 dB	-2.12 / -2.92 dB
Outdoor Antenna and Cable	SC288W / Galaxy 5412-P and SC240-20FN (20 ft)	0.94 dB	0.94 dB	0.71 dB	0.44 dB	0.64 dB\0.24 dB
Indoor Antenna and Cable	SC248W Panel and SC240-20FN (20 ft)	4.94 dB	4.94 dB	4.71 dB	6.44 dB	6.64 / 6.24 dB
Indoor Antenna and Cable	SC302W and SC240-20FN (20 ft)	0.44 dB	0.44 dB	0.71 dB	1.44 dB	0.64 / 1.24 dB
Desktop / RV
Outdoor Antenna and Cable	SC288W and SC240-40FN (40 ft)	-0.52 dB	-0.52 dB	-0.98 dB	-2.52 dB	-2.12 / -2.92 dB
Indoor Antenna	SC120W whip	1.2 dB	1.2 dB	1.2 dB	3 dB	3 / 3 dB
Indoor Antenna and Cable	SC302W and SC240-20FN (20 ft)	0.44 dB	0.44 dB	0.71 dB	1.44 dB	0.64 / 1.24 dB

*All equivalent antennas and cables are suitable for use with the Fusion2Go 3.0

* Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Changes or modifications not expressly approved by SureCall could void the user's authority to operate the equipment.
* FCC 27.50(d)(4) Statement: Fixed, mobile and portable (hand-held) stations operating in the 1720-1755 MHz band are limited 1 Watt EIRP. Fixed stations operating in this band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications.

When used with any mobile device utilizing the 1710-1755 MHz band, the FCC limits booster equipment placement to a maximum of 10 meters above ground level. Installation of this equipment which does not comply with federal requirements may subject the owner to FCC enforcement action.

	PreAGC PreAGC
	Pulse GSM 4.1 MHz AWGN
Frequency (MHz) (dBm) (dBm)	Input	Output	Gain (dB)	Input (dBm) (dBm) (dB)	Output (dB)	Gain
Uplink: 1710-1755	-27.2	20.0	47.2	-25.3	20.7	46.0
Uplink: 1850-1915	-25.6	20.9	46.5	-25.9	19.6	45.5
Uplink: 824-849	-25.3	22.3	47.6	-21.7	25.6	47.3
Uplink: 698-716	-24.1	28.0	47.1	-20.1	26.6	46.7
Uplink: 777-787	-21.3	25.6	46.9	-20.5	25.9	46.4
Downlink: 2110-2155	-48.5	-3.7	44.8	-49.4	-4.5	44.9
Downlink: 1930-1995	-45.7	1.0	46.7	-46.7	0.2	46.9
Downlink: 869-894	-51.1	-5.5	45.6	-51.6	-5.8	45.8
Downlink: 728-746	-48.0	-0.3	47.7	-48.4	-1.8	46.6
Downlink: 746-757	-49.4	-2.8	46.6	-50.9	-4.3	40.6

FCC 15.105 Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Consumer Guidelines

This is a CONSUMER device

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.

In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05 ^1

You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e. MUST NOT be installed within 20 cm of) any person.

You MUST cease operation of this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider.

WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device.

Register your cellular booster with your wireless carrier at the following urls:

Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html

AT&T: https://securec45.securewebsession.com/attsignalbooster.com/

T-Mobile: https://support.t-mobile.com/docs/DOC-9827

Sprint: https://www.sprint.com/legal/fcc_boosters.html

U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp

CAN ICES-3 (B)/NMB-3(B) (Canada):

This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

Three-Year Product Warranty

Register at www.SureCall.com/Activate

SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.

Products returned by customers must be in their original, un-modified condition, shipped in the original or protective packaging with proof-of-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container.

Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.)

This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages the product's physical or electronic properties.

SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCall's option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products.

As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges.

The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specifications or which are not defective or not covered by this warranty.

Products sold by SureCall shall not be considered defective or non-conforming to the Buyer's order if they satisfactorily fulfill the performance requirements that were published in the product specification literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it.

Limitations of Warranty, Damages and Liability:

EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING.

SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED.

All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof.

SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers. SureCall shall not be held liable to anyone for any indirect, special or consequential damages due to omissions or errors. The information and specifications in this document are subject to change without notice.

© 2022. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners.

48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.com