802 - Suivi Xenarc - Free user manual and instructions

USER MANUAL 802 Xenarc

2 | Table of Contents

Features 03

Specifications 04

Quick - Start 05

Remote Control 07

Hardware Installation 10

800 / 802 / 805 Models

Additional Info....14

Owner's Record....15

Model Comparison Chart

	800YV	B00TSV	802YH	B02TSH	805YV	B05TSV
VGA ( D-SUB 15 Pln ) Input	1	1	1	1	1	1
VIDEO ( RCA ) Inputs	2	2	2	2	2	2
AUDIO ( RCA ) Inputs 2 2			1 1 2 2
PC AUDIO ( DC 3.5mm ) Input	1	1	1	1	1	1
Built - In Speaker	●	●	●	●	●	●
High Quality Scaling	●	●	●	●	●	●
High Quality Anti - Aliasing	●	●	●	●	●	●
Auto Power On	●	●	●	●	●	●
Touch Screen	○	●	○	●	○	●
AR Touch Screen	○	○	○	●	○	○
HDMI Input ( with sound )	○	○	●	●	○	○

Standard
○Not Available

Features

• For In-Car Computing, PC, Server, GPS, POS, and various VGA Use
  • High Bright LCD Panel with LED Backlight
  • 5-wire Resistive Touch Screen (USB)
  (Optional: 5-Wire Resistive AR+AF GFG Touch Screen)
  • Multi - Monitor Touchscreen Support
  • VGA Input ( D-SUB 15-Pin ) x 1
• Video Input x 2
• Audio Input x 3
  • HDMI Input With Sound x 1 ( TSH/YH Only )
  • Built-in Speaker
  • NTSC / PAL Multi-System
  • 4:3 Aspect Ratio
  • High Resolution Display
  • Supports HDMI Version 1.1 \~ 1.3 ( TSH/YH Only )
• Adjustable backlight level for night-time use
  • Realtek High Performance Image and Video Signal Processor
  • AISS - Advanced Image-Scaling and Shaping
  • Factory Mode to disable front button(s)
  • Factory Mode to disable on screen text
• Last Input memory
• Last Power setting memory
  • IR Remote Control
  • Auto power-on upon signal detection
  • Automatic display adjustment
• On Screen Display Control
• Mirror Image Flip
  • Vertical Image Flip
  • AV2 Auto Switching for backup camera
  • Copper Stand: 360° / Height Adjustment
  • U-Shape mounting bracket (800 / 802 Only)
  • VESA 75mm mounting holes
  • 26-Pin heavy-duty connector with connector locking
• Anti Glare Coating
  • Supports 9V DC \~ 36V DC
  • "E" Mark Certified for Automotive use

4 | Specification

Specifications

Display Specifications

• Screen Size : Diagonal 8" (4 : 3)
  • Physical Resolution : 800 (H) x 600 (V)
  • Pixel Pitch : 0.0675 ( H ) x 0.2025 ( V ) ( in )
• Dot Resolution : 2400 x 600 = 1,440,000 (dots)
  • Supported Resolution : 640 x 480 \~ 1920 x 1080
  • Supported Refresh : 60\~75Hz
• LCD Panel Brightness : 800 / 805 LCD Panel Brightness : 400cd/m² 802 LCD Panel Brightness : 1000cd/m²
• Contrast Ratio : 500 : 1
  • Response Time : 10\~15ms
• Viewing Angel: Vertical: 120^ / Horizontal: 140^
• Colors : 6-bits (262,144 colors)

Physical Specifications

• Video Source Input
- RGB analog male connector ( 15-Pin D-SUB ) x 1
— RCA composite video female connector x 2
— HDMI input connector x 1 ( TSH/YH Only )

• Audio Source Input
— RCA audio female connector x 2
- DC 3.5 mini stereo plug x 1
— HDMI audio x 1 ( TSH/YH Only )

• Touch Panel (Input / Output)
• USB connector x 1 ( TSV/TSH Only )

• Power Source Input
— Single 12V DC_IN (Supports 9V\~36V)

• External Buttons Input

• OSD buttons for Power / Select / Menu / Increase / Decrease / Dimmer
  — Power button for power switch

• Dimension (In)
  800 / 802 : 8.98 ( L ) x 6.46 ( H ) x 1.42 ( D ) In
  805:7.87 (L) x 6.42 (H) x 1.44 (D) In

• Weight (lb)
  800 / 802 : 2.64 lbs
  805:1.87 lbs

Electrical Specifications

• Operating Voltage Range : DC 9V \~ 36V 2A
  • Power Supply : DC 12V
  • Power Consumption : Suspended Mode < 2W (Max) Continuous Mode < 14W (Max)
  • Audio Input < 150MV

Other Specifications

• Operating Temperature : -4°F \~ 158°F
• Storage Temperature : -22°F \~ 176°F
  • FCC, CE, E13 Certification
• ROHS Compliant
  • 24 Month Warranty

Diagram of a monitor rear panel with labeled parts and red arrows indicating motion or movement directions

Optional Mounting Stand (800 / 802 Only)

Step 1.

Slide Monitor into optional mounting stand

Step 2.

Secure "Height" position by adjusting Knob

Step 3.

Secure "Tilt" position by adjusting Knob

Diagram of a monitor with labeled parts and red arrows indicating motion or movement, showing structural changes.

Optional Mounting Stand (805 Only)

Step 1.

Slide Monitor into optional mounting stand

Step 2.

Secure "Height" position by adjusting Knob

Step 3.

Secure "Tilt" position by adjusting Knob

Front view of a flat-screen monitor mounted on a stand with a red arrow pointing to the side (no visible text or symbols)

U Type Stand (800 / 802 Only)

Secure "Tilt" position by adjusting knob

Please install the knob with two washers as shown

Close-up of a black electronic device with a red component inserted, showing internal components and wiring (no visible text or symbols)

Create VGA Source

Step 1.

Attach the 26-Pin connector to the monitor

Close-up of a black VGA cable with a red arrow pointing upward (no text or symbols)

Step 2.

Attach the D-Sub 15-Pin connector to your computer's analog VGA output connector

Close-up of a black electronic component with a red arrow pointing to a small black object (no visible text or symbols)

Create Power Source

Insert Power Adapter as show

Quick - Start

Line drawing of a USB connector (no text or symbols)

Create Audio / Video Source

Step 1.

Attach your "Video Source one"

(e.g. VCR, Video Game Console)

to the Yellow RCA connector marked Video 1

Line drawing of a USB connector (no text or symbols)

Step 2.

Attach your "Video Source two"

(e.g. VCR, Video Game Console)

to the Yellow RCA connector marked Video 2

Pure electrical circuit lines without any symbols

Step 3.

Attach your "Audio Source" to the White / Red connectors marked Audio.

The sound will be outputted through the

monitor's internal speaker

Line drawing of a mechanical component with no visible text or symbols

Step 4.

Attach your "PC Source" to the back VGA connector

Simple line drawing of a mechanical component with no text or symbols

Step 5.

Attach the mini stereo jack marked "PC

Audio " to your computer's earphone jack

Icon of a server with a green downward arrow, indicating download or download action (no text or symbols)

Touchscreen Installation

(800/802/805 TSV Only)

Please download and install the Touchscreen driver for your operating system from our website WWW.XENARC.COM.

Hand holding a USB flash drive with an orange arrow indicating left motion (no text or symbols)

Attach the USB plug to your USB connector

Line drawing of a device casing with internal components (no text or symbols)

Secure Knob Installation

Please use the attached knob and screws to fasten the cable on the rear of cover

Note : Please use the included U-Shape metal bracket

to secure the 26-PIN Connector in applications where a lot of vibration and movement are involved

POWER MF/RS DRIVER NOTE DISPLAY SLEEP PICTURE PC AUTO MENU SOURCE VOL- VOL+ ▲ ◀ ← ▶ ▼

1. Power Button : Turn the monitor ON or OFF.
2. Mirror Button : Enable or Disable the mirroring of the display. Continue to press it and choose the mirroring you want.
3. Dimmer Buttom : Dim the brightness of the display by pressing this key continuously to set the brightness level of the display. ( Only available when auto sensor is disabled.)
4. Mute Button : Mute the speaker. Press again to restore the sound of the speaker.
5. Display Button : Display the current input signal on the screen.
6. Sleep Button : Enable or Disable the sleep timer. Press this button to select and set the time to turn off the monitor automatically.
7. Picture Button : Enable or select the picture mode you prefer. Press this button and then you can select Standard, user, bright, or soft.
8. PC auto Button : Enable to adjust the picture automatically, only available in VGA mode.
9. Menu Button : Enable the OSD menu. Press this button again to exit.
10. Source Button : Enable to switch to different source input.
11. Vol+ / Vol- Button : Increase or Decrease the Volume.
12. Up / Down Button ( ▲ / ▼ ) : Navigate Up or Down in OSDmenu.
13. Left / Right Button (◀/▶): Navigate Left or Right in OSD menu, as well as decreasing or increasing the value of setting in OSD.
14. Enter Button : Confirm the setting or selection.

8

Remote Control

Instructions for remote controller shortcuts

1. Dimmer (Adjust the brightness)

By pressing the Dimmer button, it will adjust the brightness level from 0, 20, 40, 60, 80 and 100.

Default is 100 ( Only available when auto sensor is disabled )

Dimmer: 100

2. Sleep ( Set the sleep time out )

Select the time to automatically turn off the monitor. The minimum is 15 minutes and the maximum is 120 minutes.

60 Min

3. Picture ( Set the modes of the picture )

Enable to select the picture modes you prefer. Press this button and then you can select standard, user, bright, or soft.

Bright

4. PC AUTO (Auto adjust, only on VGA)

By pressing PC AUTO, it will auto adjust the image.

5. Source (Select the source)

Press this button to select the input signal to display. If one of these modes is disabled in OSD menu, please setup under (Function → Source Enable)

6. Mirror (Image mirror)

Enable or Disable the mirroring of the display. Continue to press it and choose the mirroring mode you wish to display.

Color Brightness 50 Contrast 50 Sharpeness 50 Color Temp 6500K Backlight 100

7. Mute

Mute the speaker.

Press again to restore the sound of the speaker.

8. Display (Display mode)

Display the current input signal on the screen.

9. VOL- / VOL+

Volume adjustment

Volume 50

Buttons description:

1. Power Button : Press to turn ON or OFF the monitor.
2. Select Button : Press to select the input signal to display. Press the left (◀) or right (▶) to highlight the input source desired and then press menu button to make the selection.
3. Menu Button : Press the button to show the OSD menu. And then press the left (◀) or right (▶) to navigate through the menu. Press “Select” button to go through a list of settings and options. Press the left (◀) or right (▶) buttons to change the values of settings. Press Menu button again to leave the OSD menu.
4. Right Button: Press this button to increase volume/dimmer or the value of settings inside the OSD menu.
5. Left Button : Press this button to decrease volume/dimmer or the value of settings inside the OSD menu.
6. ☐immer: This button controls display brightness.

OSD ( On-screen display ) Menu

Press MENU to display the OSD on the screen, then press UP / DOWN (or LEFT / RIGHT from the front control panel) to highlight a different category. Press ENTER (or Source) to adjust the selected highlighted category. Under the selected item page, press UP / DOWN (or Source) to select the item from the list, use LEFT / RIGHT to adjust. To select the sub-menu, please press LEFT to enter to the sub-menu.

OSD ( On-Screen Display ) Menu

The Settings and options in the OSD menu are categorized into 6 Categories : Color, Adjust, OSD, Setup, Function, Sound

Color Brightness 50 Contrast 50 Sharpness 50 Color Temp 6500K Backlight 100

1. Colors

• Brightness: Adjust brightness by pressing Left (◀) or Right (▶) buttons. Increase the number for a higher level of brightness. Decrease the number for a lower level of brightness.
• Contrast : Adjust brightness by pressing Left (◀) or Right (▶) buttons. Increase the number for a higher level of contrast. Decrease the number for a lower level of contrast.
• Sharpness : Adjust sharpness by pressing left or right buttons. Press left to decrease sharpness and right to increase the level of sharpness.
• Color Temp : Set the color temp to the desired setting : 6500K, 9300K and User.
• Backlight : Adjust backlight intensity by pressing Left (◀) or Right (▶) buttons. Increase the number for a higher level of backlight output. Decrease the number for a lower level of backlight output. Only works when Auto sensor is turned off.

Adjust Auto Config H Position 100 V Position 1 Phase 47 Clock 24

2. Adjust

• Auto Config : Adjust display automatically.
- H Position : Adjust the Horizontal position by pressing the left or right buttons.
- V Position : Adjust the Vertical position by pressing the left or right buttons.
- Phase : Phase (fine) adjustment. Image flickering can be removed through changing this setting (only vaild for VGA setting)
- Clock : Adjust the horizontal sync width of the screen image.

12 | Hardware Installation

OSD H Position 50 V Position 50 OSD Timeout Off Transparent Off LR Key Volume Key Backlight 100

3. OSD

• H Position : Adjust the OSD Horizontal position by pressing the left or right buttons.
• V Position : Adjust the OSD Vertical position by pressing the left or right buttons.
• OSD Timeout : Adjust the time out of the OSD.
• Transparent : Adjust the transparency of the OSD screen image.
• LR Key : Set front Left/Right buttons as Volume or Dimmer Control.
  • Key Backlight : Adjust the buttons backlight intensity.

Setup CCD First Off Auto Sensor Off Source Info Off Source Name On Mirror Hor Off Mirror Ver Off

4. Setup

• CCD/AV2 First : Set whether to have monitor switch to CCD/AV2 signal automatically if a signal is present. ( Default is OFF )
• Source Info : Select to turn OFF or turn ON displaying of On Screen Source Information.
• Source Name : Display the source of input signal. If it is ON, it will display the information on the left corner of the screen when Display button is pressed on remote control. ( Default ON )
• Mirror Hor : Adjust the horizontal mirroring position. If it is ON, the image will be on the left and right side. ( Default ON ).
• Mirror Ver : Adjust the vertical mirroring position. If it is ON, the image will be on the left and right side. (Default ON)

Function Reset > Display Ratio 16:9 Sleep Off Keypad > Source Enable > Touch Controller PC USB

5. Function

• Reset : Reset to Factory default setting.
• Display Ratio : Select the display mode to 16:9, 4:3 and Auto.
• Sleep: Select the time to automatically turn off the monitor. The minimum is 15 minutes and the maximum is 120 minutes.
• Keypad: The function allows you to disable or enable the buttons at the front of the monitor. Power, Menu, Select, Dimmer, Left, and Right buttons can be disabled or enabled.
• Source Enable : Select to Enable or disable the input signal. If an input signal is turned off, the source will be disabled.
• Touch Controller : Switch the power source for touch control board.

Sound Volume 50 Mute Off Hdmi input Hdmi

6. Sound

• Volume : Adjust the audio volume of built-in speaker.
- Mute : Enable or disable muting of built-in speaker.
- HDMI Input : Select the audio source while in HDMI input mode. When set to HDMI, the built-in speaker will output the digital audio signal from HDMI. When set to Analog, the built-in speaker will output the analog audio signal from the mini stereo jack marked as “PC Audio” ※The HDMI output option is only available for TSH / YH models

14 | Additional Info

NOTE:

NOTE 1 :

If you are trying to connect the monitor to a laptop computer, please make sure to enable the 15-PIN D-SUB external monitor output located at the back of your laptop computer. Some laptop computers have three modes: Laptop Display Only, Laptop Display plus External Monitor, and External Monitor Only. If this is the case, please switch to the External Monitor Only mode.

NOTE 2 :

Touch Screen device driver must be installed onto your computer in order for the Touch Screen to become operational. Touch Screen driver and software for different operating systems can be downloaded from our website at WWW.XENARC.COM.

NOTE 3 :

The maximum voltage supported by the monitor is 36V DC. Feeding the monitor with higher voltage will damage the monitor and void the warranty. Please use a fused power source if you decide to wire the monitor directly to your car's electrical system. It is also crucial that you check the polarity on the connection.

NOTE 4 :

If the monitor is not displaying the VGA signal properly, the VGA signal might be out of range. Please try changing your display refresh rate to 60, 70, 72, or 75 Hertz.

NOTE 5 :

Please note that the LCD screen is made with high-precision technology. However black points or bright points of light (red, blue, or green) may appear constantly on the LCD screen, and irregular colored stripes or brightness may appear on the LCD screen. This is not malfunction. (Effective dots: more the 99.999%)

For Technical Support, Please contact us at:

Xenarc Technologies Corp.

Toll Free : 888 - 656 - 6536

E - Mail : support @ xenarc.com

Website : www.xenarc.com

Technical line drawing of an electronic circuit board layout with no visible text or symbols

Technical line drawing of a mechanical assembly with mounting holes and internal components (no text or symbols)

The length of the mounting screw. [M4 x 8 mm (max)] (common between right side and left side)

Owner's Record

The model and serial number are located on the rear of the unit. Please record these numbers in the spaces provided below, as well as the dealer name, address, and telephone number. Please refer to these records whenever speaking to your dealer regarding this product.

Model Number : ____

Serial Number : ____

Dealer Name : ____

Street Address :

City : ____

State :

Zip : ____

Phone Number : ____

Purchase Date : ____