TVC-32G - Tripod Really Right Stuff - Free user manual and instructions

USER MANUAL TVC-32G Really Right Stuff

Close-up of a black RRS camera head with metallic adjustment and green circular lens (no text or symbols on body)

MADE

IN THE

USA

SERIES AND MODELS

Our tripods & monopods vary in height, weight, load capacity, and features. 'Pods within the same Series share a common load capacity. See our website for detailed specifications.

RRS 'Pod Models

Understanding 'Pod Names

TVC-34L

Tripod or Monopod Apex (Versa, Quick-Column, Fixed) Carbon Fiber, Aluminum Pod Series Number of leg sections per leg Long, Short, or Ground Level

Series 1

TQC-14 Mk2 Tripod, Quick-Column, 4 leg sections 25 lb / 11.3kg 2.6 lb / 1.2kg

TFC-14 Mk2 Tripod, Fixed Apex, 4 leg sections 25 lb / 11.3kg 2.3 lb / 1.1kg

Series 2

TVC-23 Mk2 Tripod, Versa-style Apex, 3 leg sections 40 lb / 18kg 3.3 lb / 1.5kg

TVC-24 Mk2 Tripod, Versa-style Apex, 4 leg sections 40 lb / 18kg 3.3 lb / 1.5kg

TVC-24L Mk2 Tripod, Versa-style Apex, 4 leg sections, Long 40 lb / 18kg 3.7 lb / 1.7kg

TFC-24L Mk2 Tripod, Fixed Apex, 4 leg sections, Long 40 lb/18kg 3.7 lb/1.7kg

Simple line drawing of a tripod with evenly spaced dots at each vertex (no text or symbols)

Series 3

TVC-32G Mk2 Tripod, Versa-style Apex, 2 leg sections, Ground 50 lb / 23kg 2.5 lb / 1.1kg

TVC-33 Mk2 Tripod, Versa-style Apex, 3 leg sections 50 lb / 23kg 4.3 lb / 1.9kg

TVC-33S Mk2 Tripod, Versa-style Apex, 3 leg sections, Short 50 lb / 23kg 4.1 lb / 1.8kg

TVC-34 Mk2 Tripod, Versa-style Apex, 4 leg sections 50 lb / 23kg 4.4 lb / 2.0kg

TVC-34L Mk2 Tripod, Versa-style Apex, 4 leg sections, Long 50 lb / 23kg 4.7 lb / 2.1kg

Simple line drawing of a tripod with evenly spaced dots at each vertex (no text or symbols)

Series 4

TVC-42G Mk2 Tripod, Versa-style Apex, 2 leg sections, Ground 100 lb / 45kg 4.1 lb / 1.8kg

TVC-43 Mk2 Tripod, Versa-style Apex, 3 leg sections 100 lb / 45kg 6.0 lb / 2.7kg

TVC-44 Mk2 Tripod, Versa-style Apex, 4 leg sections, Short 100 lb / 45kg 6.5 lb / 3.0kg

TVC-45 Mk2 Tripod, Versa-style Apex, 5 leg sections 100 lb / 45kg 6.9 lb / 3.1kg

SERIES AND MODELS

Quick-Column Series 1
Fixed Series 1
Versa Series 2

TQC-14 Mk2 TFC-14 Mk2 TVC-24 Mk2 TVC-23 Mk2 TVC-24L / TFC-24L Mk2

Versa Series 3

Versa Series 4

Our tripods are made with carbon fiber, hard anodized 6061-T6 aluminum, and stainless steel. Made in the U.S.A.

Technical diagram of a tripod-mounted device with labeled parts in Chinese

1. Mounting Stud

3/8" Mounting Stud securely attaches to tripod heads.

2. Spirit Level

The bullseye helps you level your tripod with ease (Versa tripods only).

3. Angle Stop

The Angle Stop ratchets into place to set leg angle.

4. SureGrip™ Apex Lock

Carry your tripod over your shoulder with confidence. The SureGrip™ Apex Lock securely fastens your tripod accessory (Versa tripods only).

5. Leg

Ultra thin wall, large diameter carbon fiber tubes provide superior strength and extraordinary vibration absorption without adding weight.

6. Weight Hook

Can be used with a carabiner 14 " to 38 " diameter.

7. Twist Lock

Extra large twist locks made with rubber over-molded aluminum provide a comfortable grip and easy rotation.

8. Interchangeable Foot

Unique tapered shape assures maximum stability and prevents legs from touching the ground even at full spread.

BASIC TRIPOD USE

Before taking your tripod afield, take a moment to familiarize yourself with its operations.

Diagram showing a tripod with adjustable base and top, and a separate view of a tripod with a red directional arrow indicating motion (no text or symbols present)

1. Swing otall three legs.
2. Grab all twist locks with one hand and rotate one quarter turn.
3. Pull leg until fully extended.
4. Tightenwist locks.
5. Repeat on all legs.
6. To collapse, loosen twist locks and collapse leg. Grab all twist locks with one hand and tighten.

All tripod feet are loose. This gives you the option of swapping the stock feet for Rock Claws or Foot Spikes. Once you have chosen feet to your liking, use one drop of threadlocker fluid to secure feet (included with your tripod).

Diagram showing four sequential steps of a mechanical or fluidic device with red arrows indicating motion direction.

Technical line drawing of a tripod-mounted device with multiple legs and connectors, shown from different angles (no text or symbols present)

The tripod can be arranged in a variety of positions to accommodate nearly every terrain. Remove column from Quick-Column tripods for ground set; see page 13.

SETTING LEG ANGLES

For low-level settings, use the ratcheting Angle Stop as shown below.

Technical diagram of a mechanical device with numbered callouts indicating directional movement or assembly points.

1. Swing leg inward slightly.

2. Slide Angle Stop out completely. (Slide back in at any time to cancel.)

3. Swing leg to horizontal position. Angle Stop will engage.

Illustration of a handgun with a red curved arrow indicating motion (no text or symbols)

1. Move to desired position. Angle Stop will ratchet automatically.

4 PENSIT

REVERSE THE STUD

The threaded platform stud is dual-threaded 14 "-20 and 38 "-16 and is reversible. Follow the steps to reverse the stud from 38 "-16 to 14 "-20.

1. Use 5 and t 2. For tr the S remo be re key t Stra 3. Turn Use S the S bott 4. Re-in (not ! 2 3

1. Use 5/32" hex key to unscrew and remove the Stud.

2. For tripods with fixed apexes, the Strap & Strap Pin must be removed before the Stud can be re-installed. Use 5/32" hex key to unscrew and remove the Strap Pin.

3. Turn the tripod upside down. Use 5/32" hex key to re-install the Stud by screwing it into the bottom of the apex.

4. Re-install the Strap & Strap Pin (not shown).

The Stud is not secured with threadlocker fluid at the factory. This allows you to easily reverse it if needed. To semi-permanently secure the Stud in place, use one drop of threadlocker fluid (included with your tripod) on the Stud.

ADJUST THE SET SCREW

The Mk2 tripods with fixed apexes come with one Set Screw that can be used to prevent your tripod head from coming loose. For clarity, drawings do not show the tripod head installed to the tripod. Install your tripod head, then follow steps.

Set Screw 1 2

1. Swing leg closest to Set Screw inward slightly.

2. Pull Angle Stop out until it stops, then swing leg completely out.

3. Insert 2.5mm hex key into Set Screw, then turn clockwise to tighten it against the bottom of your tripod head.

Technical diagram showing mechanical assembly with labeled parts and a red arrow indicating a step indicator

Note that if you tighten the Set Screw it will almost certainly mar the bottom of your tripod head. To semi-permanently install your tripod head and avoid any blemish marks use one drop of threadlocker fluid on the Stud (included with your tripod) when you install your head.

MAINTENANCE

Regular maintenance of your tripod is highly recommended to keep its performance and appearance in top shape. Your tripod is built to last through years of use with proper maintenance and care. Protect your investment by following this guide to good maintenance practices.

»Check SureGrip™ set screws for proper tightness to ensure the Apex accessory is secure. Use provided hex key to make adjustments as necessary.

»When exposing your tripod to mud or saltwater, use a damp towel to wipe down and dry the legs completely before collapsing. Then, disassemble and clean tripod per instructions on page 10.

SAND AND SALTWATER ARE YOUR TRIPOD'S WORST ENVIRONMENTAL ENEMIES. ALWAYS DISASSEMBLE AND CLEAN TRIPOD AFTER EXPOSURE.

Technical line drawing of a tripod frame with a wrench and circular arrow indicating rotation (no text or symbols)

Technical line drawing of a tripod-mounted device with two legs and a central hub, showing rotational arrows (no text or symbols)

»Leg bolts should be tight enough to prevent legs from collapsing, but loose enough to open with ease. Use 316 ” hex key to make adjustments as necessary.

» Periodically apply multi-purpose lubricant to the threads of each leg joint. However, never lubricate the carbon fiber legs.

» Check for metal corrosion. Contact Really Right Stuff for any necessary replacement parts.

» Always keep your tripod in a protective bag when transporting or storing.

» Always fully extend the lower leg section during use in sand or mud to prevent contaminating leg joints.

CLEANING

Avoiding harsh environments such as sand and saltwater is essential to preserving the life of your tripod. However, we do understand that sometimes it is unavoidable. Therefore, we have made it simple to disassemble the leg portions for thorough cleaning.

1a 1b 2 6

1. Unscrew Twist Lock and fully remove leg section.

2. Remove Twist Lock, foot, and Anti-Twist Sleeves.

3. Wipe down leg, foot, and exposed threads with damp cloth, removing any dirt or debris. Allow to dry.

4. Apply a small amount of multi-purpose grease to the exposed leg threads.

5. Replace Anti-Twist Sleeves and Twist Lock.

6. Holding Anti-Twist Sleeves in place, insert leg into tripod aligning the ribs inside the legs between the Anti-Twist Sleeves. Slide leg in completely.

7. Screw Twist Lock and foot back into position. Rotate Twist Lock back and forth to spread grease.

QD STRAP SYSTEM

Look no further for the most clever shoulder strap system for your RRS tripod*. This new system incorporates QD “Quick-Detach” mounting hardware and allows the strap to be quickly and easily removed at any time.

The system has two parts:

Technical line drawing of a mechanical clamp assembly with multiple bolted components (no text or symbols)

Two QD Mounts

Apex QD Mount + Leg QD Mount Leg QD Mounts come in 3 sizes for RRS Series 1, 2, and 3 tubes.

Simple line drawing of a mechanical clamp or bracket with no text or symbols

QD-Compatible Strap

Strap must have two QD sling swivels. Purchase strap with pre-installed QD swivels, or buy QD swivels separately and use with your own strap.

Leg QD Mount

Use included hex key and screws to install Leg QD Mount to the bottom of the first leg section. Install so that the QD socket is facing in, not out. When carrying the tripod, this leg will face the ground and the strap will feed up between the other two legs. The tripod legs will remain folded together without the need to tie them.

Technical line drawing of a flashlight component with two screws attached (no text or symbols)

Pure mechanical diagram showing a valve or pump with three circular components and a central hub (no text or symbols)

Side View

All 3 tripod legs stay together when Leg QD Mount is installed correctly.

* Apex QD Mounts are compatible only with mid-2016 and newer Series 2/3/4 tripods. Series 1 Apex QD Mount is compatible only with the TFC-14 Mk2 (not compatible with TQC-14 Mk2). For other models, do not use Apex QD Mount; instead, install two Leg QD Mounts.

QD STRAP SYSTEM

Apex QD Mount

For Series 4 Install Apex QD Mount to underside of apex with two screws.

For Fixed and Versa Series 1/2/3 Install Apex QD Mount into threaded socket on side of apex.

CHANGING APEX ACCESSORIES

Apex Accessories are only available for Mk2 Versa Tripods. Your tripod head must first be removed from the Mounting Stud.

Diagram of a mechanical device with labeled parts and directional arrows indicating movement or assembly.

1. Use provided hex key to loosen all three SureGrip™ set screws around Apex. Two rotations are sufficient, complete removal is not required.

2. Remove Apex platform or other accessory by pushing it upward.

3. Insert compatible accessory. NOTE: Although Gitzo® Systematic accessories will fit Mk2 Versa Series 3 tripods, SureGrip™ functionality is only compatible with Really Right Stuff brand accessories.

4. Tighten all three SureGrip™ set screws.

Technical diagram of a mechanical assembly with numbered components and directional arrows indicating motion or movement.

'POD ACCESSORIES

Tripod & Monopod Accessories to fill all your photography needs.

Versa Quick Columns

With integrated SureGrip™

TA-3-QC for Versa Series 3

TA-2-QC for Versa Series 2

MTX Multi-Tool

The best tool for your tripod.

Really Right Stuff

Replacement Feet

Great for tripods & monopods.

TA-3-FRC
Rock Claws for rocky terrain.

TA-3-FS
Foot Spikes for shifting terrain.

Leveling Bases

Choose Platform or Clamp

A leveling base on your tripod is the perfect foundation for gimbal heads, pano gear, and even ballheads. Each leveling base offers ±15^ of leveling capability and locks solidly. Choose a leveling base with a flat platform for direct mounting of a tripod head. Or choose a leveling base with a clamp if you want quick-change convenience for multiple tripod heads on the same tripod.

Universal Series 2

TA-U-LB

TA-U-LC TA-2-LB TA-2-LC

Series 3 Series 4

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawing of a mechanical component (no text or symbols visible)

Technical line drawing of a mechanical component with no visible text or symbols

THANK YOU

Thank you for purchasing a Really Right Stuff Mark 2 tripod. Many years ago, we set out to create tripods that would exemplify the best in craftsmanship and quality. We are proud to present to you the results of that pursuit. Our ‘pods are the culmination of first-hand experience and abundant input from seasoned professionals. Building upon our reputation of high precision CNC manufacturing, we enlisted unsurpassed composite manufacturing talent to bring you what we feel is a carbon fiber masterpiece. We sincerely hope you take a moment to appreciate this beautiful piece of equipment and review this manual to see how you can get the most from your tripod. If you have any questions or comments, please contact us. We love hearing your feedback

Thanks again, and enjoy.

Shinson

Joe Johnson

Really Right Stuff

Phone: Toll-free 1-888-777-5557 in the US and Canada

Email: [e-mail]

Web: www.ReallyRightStuff.com

Guarantee: All Really Right Stuff brand products are guaranteed to the original purchaser to be free of defects in materials or workmanship for five (5) years from the date of purchase.

Protected by US Patents: RRS tripods have been granted patents by the United States Patent and Trademark Office. Any party that manufactures, imports, uses, sells, or offers for sale the patented technology without permission/license from Really Right Stuff, LLC, during the term of the patent and within the country that issued the patent, is considered to infringe the patent.

Photographer on tripod observing a cascading waterfall at sunset, surrounded by rocky shore (no text or symbols visible)