Black S-84 - Pregnant OSD Audio - Free user manual and instructions

USER MANUAL Black S-84 OSD Audio

Four black audio speakers with different speaker models and sound block designs, displayed against a white background (no text or symbols visible)

S81 & S82

Features

Custom built x-over network

The S81 & S82 tweeter array uses advanced waveguide unit alignment technology to make accurate and natural high frequency reproduction.

Custom tuned and ported cabinet made from high quality MDF

Mounting brackets and feet included for different home theater custom installation requirements.

Close-up of three black speaker speakers on a gray surface (no text or symbols visible)

Triple Silk Dome Tweeter Array

Close-up of a speaker cone with concentric rings (no text or symbols visible)

8" Long Wood Fiber Inter-thread Double Compressed Woofer Cone

Close-up of a green printed circuit board with copper and black components (no visible text or symbols)

Custom Second Order X-Over

Close-up of a black speaker tower with three speakers and control buttons (no visible text or symbols)

Black box speaker with two large speakers and three circular buttons (no visible text or symbols)

17.5 in

Simple diagram of a rectangular frame with two square cutouts and a dimension label (16.3 in) on the side (no text or symbols within the frame)

8.6 in

Exterior view of a black box speaker with three circular speakers and front buttons (no text or symbols visible)

Specifications:

S81

8" Studio Monitor / On-Wall Speaker

Woofer: 8" Long Wood Fiber Inter-thread

Double Compressed Cone

Tweeter: Triple Array Silk Dome

X-Over: 12db Second Order at 2400hz

Cabinet: Front Inverted With High Transparent Grille

Gold Plated Speaker Terminals

Power Handling: 250W

Sensitivity: 93dB 1w/1m

Max SPL: 100dB

Freq Response: 40Hz - 30kHz

Impedance: 4 ohms

Finish: Black or White PUV Coated Surface

Mounting Brackets Included

Dimensions: HxWxD 16.3" x 17.5" x 8.6"

Foot Pads

Wall Mount Bracket

25.1 in

Simple geometric diagram with two squares inside a rectangle, labeled with dimensions (16.3 in 8.6 in) on the side.

Empty rectangular frame with no text, numbers, or symbols inside

Black compact speaker chamber with two speakers and three speakers, no visible text or symbols

Specifications:

S82

8" Studio Monitor / On-Wall Speaker

Woofer: Dual 8" Long Wood Fiber Inter-thread

Double Compressed Cone

Tweeter: Triple Array Silk Dome

X-Over: 12db Second Order at 2500hz

Cabinet: Front Inverted With High Transparent Grille

Gold Plated Speaker Terminals

Power Handling: 300W

Sensitivity: 94dB 1w/1m

Max SPL: 102dB

Freq Response: 38Hz - 30kHz

Impedance: 4 ohms

Finish: Black or White PUV Coated Surface

Mounting Brackets Included

Dimensions: HxWxD 16.3" x 25.1" x 8.6"

Foot Pads

Wall Mount Bracket

S84 & S85

Features

The woofers cone material is constructed from a double compressed blend of wood and biochitin fiber. This process gives the woofer unmatched dynamic range and sound quality.

The S85 midrange driver uses a gold-plated phase cone to enhance performance, thus making sound delivery more accurate and directional to the listening area.

The Haier AMT (Air Motion Transformer) Tweeter delivers superior sound quality with pinpoint accuracy and flawless reproduction.

Custom built second & third order x-over networks

Custom tuned and ported cabinet made from high quality MDF

Mounting brackets and feet included for different home theater custom installation requirements.

Close-up of a black electronic device with a circular button and three yellow indicator lights (no visible text or symbols)

Haier AMT Tweeter

Close-up of a speaker cone with concentric rings (no text or symbols visible)

8" Long Wood Fiber Inter-thread Double Compressed Woofer Cone

Close-up of a speaker grille with a bright central spot and radial sound waves (no text or symbols visible)

Mid Range Phase Cone

Black studio speaker with two circular buttons and a central speaker grille (no text or symbols visible)

Black industrial audio amplifier with three speakers and a central display (no visible text or symbols)

17.5 in

Simple diagram with two squares and a dimension label (16.3 in) on the right side, no text or symbols present.

9.8 in

Black studio speaker with three speakers and a digital display (no text or symbols visible)

Specifications:

S84

8" Studio Monitor / On-Wall Speaker

Woofer: 8" Long Wood Fiber Inter-thread

Double Compressed Cone

Tweeter: AMT Ribbon Tweeter

X-Over: 12db Second Order at 2400hz

Cabinet: Front Inverted With High Transparent Grille

Gold Plated Speaker Terminals

Power Handling: 250W

Sensitivity: 93dB 1w/1m

Max SPL: 100dB

Freq Response: 40Hz - 30kHz

Impedance: 4 ohms

Finish: Black or White Matte Painted

Mounting Brackets Included

Dimensions: HxWxD 16.3" x 17.5" x 9.8"

Foot Pads

Wall Mount Bracket

25.1 in

Simple geometric diagram with two squares and a dimension label (16.3 in) on the right side (no text or symbols within the shapes)

9.8 in

Black electronic speaker chamber with multiple speakers and a central display (no visible text or symbols)

Specifications:

S85

8" Studio Monitor / On-Wall Speaker

Woofer: Dual 8" Long Wood Fiber Inter-thread

Double Compressed Cone

Midrange: 6.5" Long Wood Fiber

Tweeter: AMT Ribbon Tweeter

X-Over: 12db Third Order at 1200Hz, 4000Hz

Cabinet: Front Inverted With High Transparent Grille

Gold Plated Speaker Terminals

Power Handling: 300W

Sensitivity: 94dB 1w/1m

Max SPL: 102dB

Freq Response: 36Hz - 30kHz

Impedance: 4 ohms

Finish: Black or White Matte Painted

Mounting Brackets Included

Dimensions: HxWxD 16.3" x 25.1" x 9.8"

Foot Pads

Wall Mount Bracket

All Optimal Speaker Design speaker products have Limited Lifetime Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period Optimal Speaker Design will replace any defective part and correct any defect in workmanship without charge for either parts or labor Optimal Speaker Design may replace returned speakers with a product of equal value and performance. In such cases, some modification to the mounting may be necessary and are not Optimal Speaker Designs responsibility.

For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by Optimal Speaker Design. The unit must be returned to Optimal Speaker Design at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damaged resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by Optimal Speaker Design

Optimal Speaker Design sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any Optimal Speaker Design product purchased from an unauthorized dealer or other source, including retailers, mail over dealers and online sellers will not be honored or serviced under existing Optimal Speaker Design warranty policy. Any sale of product by an unauthorized source or other manner not authorized by Optimal Speaker Design shall void the warranty on the applicable product.

Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at [e-mail] for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to Optimal Speaker Design at the owner's expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.

This Warranty Does Not Cover: Damage caused by abuse, accident, misuse, negligence, or improper operation (installation) • Any products that have been altered or modified • Any product whose identifying number of decal, serial #, etc. has been altered, defaced or removed • Normal wear and maintenance.