SDHG1533 - Fridge Summit - Free user manual and instructions

USER MANUAL SDHG1533 Summit

Diagram showing eight different storage or storage unit layouts with labeled sections and internal bar patterns.

MODELS:

Beverage Coolers:
ASDG1521	ASDG2411	SDHG1533	SDHG2443	CL156BV
DBGR1563ASD	DBGR2464ASD	DBGR1565SD	DBGR2466SD	DBGR1569
CL181WBV	CL24BV1	ALBV15	AL57GPNR
DBGR1834	DBGR2435	DBGR1562ASD	DBGR2461ADA
Wine Coolers:
ASDW1522	ASDW2412	SDHW1532	SDHW2442	CL155WC1
DBWC1542ASD	DBWC2443ASD	DBWC1544SD	DBWC2445SD	DBWC1549
CL18WC	CL244WC2	ALWC15
DBWC1846	DBWC2447	DBWC1541ADA
Wine/Beverage Coolers:
ALFD24WBV	CLFD243WBV
DBFD2495ADA	DBFD2496

User Manual

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

Write Serial Nos. (on lower left corner of inside cabinet) here:

Felix Storch, Inc.

An ISO 9001:2015 registered company

770 Garrison Ave

Bronx, New York 10474

www.summitappliance.com

TABLE OF CONTENTS

Appliance Safety 3

Important Safeguards 3-5

Disposal 5

Location of Parts 6-8

Installation Instructions 9-14

Before Using your Appliance 9

Installation of your Appliance 9-11

Electrical Connection 11-12

Reversing the Door Swing of your Appliance 12

Adjusting the Kick Plate 13

Installing the Stainless Steel Handle 13

Full Overlay Panel Installation Instructions 14-16

Operating your Appliance 16-26

Recommended Temperature Setting for Wine Cellars 16

Control Panel 16-22

Settings Mode 22-23

Interior Light 23

Sabbath Mode 23

Temperature Memory Function 23

Temperature Alarm/Door Alarm 23-24

Dynamic Cooling and Silent Mode 24

Door Lock 24

Shelves 24-25

Defrosting 25

Storage 26

Care and Maintenance 27

Cleaning your Appliance 27

Power Failure 27

Vacations 27

Moving your Appliance 27

Energy-Saving Tips 27

Troubleshooting 28-29

Limited Warranty 32

APPLIANCE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words "DANGER" or "WARNING".

DANGER means that failure to heed this safety statement may result in severe personal injury or death.

WARNING means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.

All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following:

• Plug into a grounded 3-prong outlet, do not remove the grounding prong, do not use an adapter, and do not use an extension cord.
• Replace all panels before operating.
• It is recommended that a separate circuit serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
• WARNING: Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids or explosive substances such as aerosol cans with a flammable propellant in this appliance or in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

Warning: Risk of Fire / Flammable Materials.

R600a

- This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. Care must be taken during transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.

• In the event of any damage:

• Avoid open flames and anything which creates a spark,
• Disconnect from the power supply,
• Air the room in which the appliance is located for several minutes and
• Contact the Service Department for advice.

- The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For every ounce of coolant at least 325 cubic feet of room space is required. The amount of coolant in the appliance is stated on the data plate inside the appliance. It is hazardous for anyone other than an Authorized Service Person to carry out servicing or repairs to this appliance.

• Take serious care when handling, moving, and using the appliance to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
- Replacing component parts and servicing shall be done by factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.

WARNING

FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

• Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
- WARNING: The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating gas appliance or an operating electric heater.
- WARNING: Do not pierce or burn. Do not damage the refrigerant circuit.
- WARNING: Be aware that refrigerants may not contain an odor.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- WARNING: To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.
- WARNING: Danger of injury from LED lamp. If the cover is defective: do not look directly into the illumination with optical lenses from close proximity. The eyes can be injured.
- CAUTION: Use this appliance only for its intended purpose. This equipment is intended for the storage and display of packaged products only.
- To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 72°F (23°C) and below 78°F (26°C).
- The appliance should not be located next to ovens, grills, or other sources of high heat.
- The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.
- Do not kink or pinch the power supply cord of the appliance.
- The size of the fuse (or circuit breaker) should be 15 amperes.
- It is important that the appliance be leveled in order to work properly. You may need to make several adjustments to level it.
- All installations must be in accordance with local plumbing code requirements.
- Make certain that the pipes are not pinched, kinked, or damaged during installation.
- Check for leaks after connection.
- Never allow children to operate, play with or crawl inside the appliance.

• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.
  • Use this appliance only for its intended purpose as described in this Instruction Manual.
• Keep fingers out of the "pinch point" areas. Clearances between the door and cabinet are necessarily small. Be careful closing the door when children are in the area.

- SAVE THESE INSTRUCTIONS -

DISPOSAL

Dispose of your appliance packaging properly. Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation!

Refrigeration equipment must be properly disposed of in a professional and appropriate way, in accordance with the current local regulations and laws which protect the environment. This applies to your old appliance and to your new unit once it has reached the end of its service life.

WARNING: Please ensure that old, worn appliances are rendered unusable before disposal by removing the doors, removing the plug, cutting the network cable, and removing or destroying any snap fastenings or bolts. Leave shelving in place. You will thus prevent children from locking themselves in the appliance during play (risk of suffocation) or endangering their lives in any other way. DO NOT dispose of the appliance in landfill as the insulation (Cyclopentane) and refrigerant gas (R600a) contained in these appliances are flammable.

Disposal instructions:

• The appliance must not be disposed of in the dustbin or with normal household rubbish.
• The coolant circuit, particularly the heat exchanger at the back/bottom of the unit, must not be damaged.
• The appliance is not to be handled as normal household waste but is to be taken to a recycling collection point for electrical and electronic goods. By correctly disposing of this product, you are contributing to the protection of the environment and to the health of your fellow human beings. Improper disposal endangers health and the environment. Further information about the recycling of the product may be obtained from your town hall, refuse collection department or the store where you purchased the product.

DANGER

Risk of child entrapment!

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous, even if they will “just sit for a few days”.

Before discarding your old refrigerator:

• Take off the doors
- Leave the shelves in place so that children may not easily climb inside.

LOCATION OF PARTS

Wine Cooler ALWC15 / CL155WC1 / CL18WC / DBWC1541ADA

Digital Control Panel LED Light Shelves (5) Security Lock Ventilation Grille Handle Door Adjustable Legs

Beverage Cooler ALBV15 / AL57GPNR / CL156BV / CL181WBV / CL24BV1 / DB1562ASD / DBGR2461ADA

Digital Control Panel LED Light Shelves (3) Ventilation Grille Adjustable Legs Handle Door Security Lock

Wine Cooler ASDW1522 / SDHW1532 / ASDW2412 / SDHW2442 / DBWC1542ASD / DBWC1544SD / DBWC2443ASD / DBWC2445SD / DBWC1549 / DBWC1846

Shelves LED Light Digital Control Panel Adjustable Legs Security Lock Handle Door Ventilation Grille

Beverage Cooler ASDG1521 / SDHG1533 / ASDG2411 / SDHG2443 / DBGR1563ASD / DBGR1565SD / DBGR2464ASD / DBGR2466SD / DBGR1569 / DBGR1834 / DBGR2435

Shelves (3) LED Light Digital Control Panel Adjustable Legs Security Lock Handle Door Ventilation Grille

Wine Cooler CL244WC2 / DBWC2447

Shelves (5) Handle Kick-plate Adjustable Legs Door Digital Control Panel Security Lock

Wine/Beverage Cooler ALFD24WBV / CLFD243WBV / DBFD2495ADA / DBFD2496

LED Light Shelves (2) Digital Control Panel Ventilation Grille Adjustable Legs Shelves (6) Handle Door Security Lock

INSTALLATION INSTRUCTIONS

Before Using your Appliance

- Remove the exterior and interior packing.

CAUTION: After unpacking you MUST allow this appliance to stand upright for at least 2 hours to allow the lubricant and refrigerant to drain back into the compressor and stabilize. Failure to do so may adversely affect performance and the lifetime of this unit.

- Clean the interior surface with lukewarm water using a soft cloth.

• Install the handle on the door. (See Installing the Stainless Steel Handle.)

Installation of your Appliance

CAUTION: This appliance is designed for storing and cooling beverages and drinks. Do not store perishable food, medicine, or other medical products.

• The appliance is designed for built-in, recessed, or free-standing installation for indoor use only.
- The appliance is intended for the storage and display of non-time / temperature control for safety foods bottled or canned products only.

NOTE: Do not store or install the appliance outdoors.

• Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level the unit, adjust the front leveling legs.
• For freestanding installation, 5" (127mm) of space at the back and sides of the unit and 4"(102mm) at the top are suggested, which allows the proper air circulation to cool the compressor and condenser for energy saving. Even for built-in installation, it is better to keep at least 14 " (5mm) of space on each side, 2" (50mm) at the back and 18 " (3mm) at the top to ensure proper service access and ventilation. And the air vent at the front of the appliance must never be covered or blocked in any way.

CAUTION: Make sure that the socket and ON/OFF switch are easily accessible after the appliance has been installed.

• Avoid locating the unit in moist areas.
• Plug the appliance into an exclusive, properly grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center.

NOTE: It is recommended that you do not install the appliance near an oven, radiator, or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Do not install in a location where the temperature will fall below 60^ F ( 16^ C). For best performance, do not install the appliance behind a cabinet door or block the base grille.

Built-in Under-counter Instructions

Make sure your installation does not block the front ventilation grille. The unit is designed to fit under worktops, using the height-adjustable ventilation grille to ensure that the feet are concealed from front view.

If the unit is fully integrated to be installed for fitting kitchen plinth, make sure that the ventilation gaps in the plinth are at least 300 square centimeters and remove the ventilation grilles, so that warm air can disperse unhindered. Otherwise, the appliance has to work harder, resulting in an increase in electricity consumption.

NOTE: When pushing the appliance into the niche, make sure that the mains cable does not get trapped.

A B C D e a 4*100mm 3*150mm

Model No.	a(Inch/mm)	b(Inch/mm)	c(Inch/mm)	A(Inch/mm)	B(Inch/mm)	C(Inch/mm)
ALBV15	32" / 813	23 12 " / 595	14 78 " / 377	32 18 " / 816	23 58 " / 600	15" / 380
CL181WBV	32" / 813	22 34 " / 575	17 34 " / 449	32 18 " / 816	22 34 " / 575	18" / 455
AL57GPNR	32" / 813	22 34 " / 575	23 12 " / 596	32 18 " / 816	22 34 " / 575	23 58 " / 600
ASDW1522	32" / 813	18" / 455	14 78 " / 377	32 18 " / 816	18" / 455	15" / 380
SDHW1532	34" / 864	18" / 455	14 78 " / 377	34 18 " / 866	18" / 455	15" / 380
ASDW2412	32" / 813	18" / 455	23 12 " / 596	32 18 " / 816	18" / 455	23 58 " / 600
SDHW2442	34" / 864	18" / 455	23 12 " / 596	34 18 " / 866	18" / 455	23 58 " / 600
CL155WC1	34" / 864	22 34 " / 575	14 78 " / 377	34 18 " / 866	22 34 " / 575	15" / 380
CL18WC	34" / 864	22 34 " / 575	17 34 " / 449	34 18 " / 866	22 34 " / 575	18" / 455
CL244WC2	34" / 864	22 34 " / 575	23 12 " / 596	34 18 " / 866	22 34 " / 575	23 58 " / 600

NOTE:

1. Models ALWC15, DBWC1541ADA and DBGR1562ASD have the same size as ALBV15.
2. Models CL18WC, DBWC1846 and DBGR1834 have the same size as CL181WBV.
3. Models ALFD24WBV, DBGR2461ADA and DBFD2495ADA have the same size as AL57GPNR.
4. Models ASDG1521, DBGR1563ASD and DBWC1542ASD have the same size as ASDW1522.
5. Models SDHG1533, DBGR1565SD and DBWC1544SD have the same size as SDHW1532.
6. Models ASDG2411, DBGR2464ASD and DBWC2443ASD have the same size as ASDW2412.
7. Models SDHG2443, DBGR2466SD and DBWC2445SD have the same size as SDHW2442.
8. Models CL156BV, DBWC1549 and DBGR1569 have the same size as CL155WC1.
9. Models CL181WBV, DBWC1846 and DBGR1834 have the same size as CL18WC.
10. Models CL24BV1, CLFD243WBV, DBWC2447, DBGR2435 and DBFD2496 have the same size as CL244WC2.

Anti-tip Bracket Installation

To reduce the risk of tipping the unit by abnormal usage or improper loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance.

• Place the anti-tip bracket on the floor as shown in the figure. An anti-tip bracket must be installed at the left side.
  • Mark the locations of the 4 holes of the anti-tip bracket on the floor.
• Use a 5/16" masonry drill bit and insert plastic anchors.
• Secure bracket to floor using screws.
• Slide appliance into position and make sure the leg engages the anti-tip bracket.

NOTE: If the unit is relocated, the bracket must be removed and installed in the new location.

Install the anti-tip bracket at the left side. The contour line of back panel of appliance The contour line of left panel of appliance 22.0mm [0.67" 2.2mm [0.59] 39.5mm [1.56] Anti-tip Bracket The contour line of right panel of appliance The contour line of front panel of appliance

Anti-tip Bracket Move the appliance to the final position.

Securing the Appliance (If available)

Pop out the cover cap on the opposite side of hinge and secure the appliance in the niche by tightening the screws through the attachment bracket if the unit is provided with an attachment bracket.

Pure technical diagram of mechanical components without any text, numbers, or symbols

Electrical Connection

WARNING

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified electrician or an authorized service center.

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of electrical shock.

Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC \~60Hz three-prong grounded electrical outlet. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or dangling.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

Extension Cord

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

Reversing the Door Swing of your Appliance

This unit has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow the reversal instructions shown on the following page.

NOTE: All parts removed must be saved to allow the door swing to be reversed.

Technical diagram showing three labeled mechanical assembly steps with numbered components

WARNING

Use extreme caution with the articulated hinges. The hinge is self-closing, and many pinch points exist prior to built-in installation.

1. Remove the cover caps (3) and then remove the glass door by unscrewing the four screws (1) and (2). Be careful to hold the glass door firmly after removing the screws and place it on a padded surface to avoid the risk of damage.
2. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right-hand side.
3. Rotate the glass door 180°, remove the lock holder and reinstall it to the bottom of the door frame.
4. Refit the glass door to the opposite side. Then screw and tighten it after the door is leveled.

Adjusting the Kick Plate (Only for ADA models)

The pre-fitted kick-plate of the appliance includes an adjustable kick-plate section that is initially seated behind the upper section. In order to adjust the kick-plate height, follow the instructions below:

1. Remove the screws (1) from both the top left- and top right-hand sides of the kick-plate.
2. Loosen or remove the screws (2) from both the bottom left- and bottom right-hand sides of the kick-plate. Failure to loosen the bottom screws sufficiently may cause damage to the lower trim when adjusting it.
3. Carefully guide the lower trim down until the desired height is achieved.
4. Reinsert screws and tighten them.

Installing a Stainless Steel Handle

This appliance includes a stainless steel handle that is not required to operate the unit. To install the handle, follow the instructions below:

Locate the handle (1) over the mounting stub (3) of the door and using the supplied Allen key, tighten the securing grub screws (2) to fix the handle.

Technical diagram of a ventilation system with labeled components 1 and 2

Technical diagram showing a mechanical assembly with labeled parts 1, 2, and 3, including directional arrows and annotations.

Full Overlay Panel Installation Instructions

These models are designed for field-installed overlay panel. The overlay panel covers the stainless steel to give a built-in appearance. The overlay panel and appropriate hardware are not included with the unit and the end user needs to prepare them themselves. Please follow the instructions below for installation:

Door Panel Preparation

Prepare the overlay panel to the dimensions shown below.

W 19mm [3/4"] 54mm [2 1/8"] 6-5"2.5mm [5 51/10"] 6mm[15/84"] DEEP 14.5mm [37/84"] 54mm [2 1/8"]

IMPORTANT:

1. H = Height of door + 1mm [3/80"], W = Width of door + 4mm [5/32].
2. It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed.

Included in the bracket kit
1			9
Phillips self-tapping screw (6)	Bottom bracket (1)	Top brackets (1)	Phillips self-tapping screw (6)

Door Panel Installation

NOTE: This design will leave a 3mm gap between the panel and the unit door.

If you do not want the 3mm gap, you will have the option to route the wood according to the bracket's dimensions. Then proceed to install the bracket following the instructions below.

Installing the handle on the overlay panel

If reusing the handle that came with the unit:

1. Unscrew the studs located on the front face of the door and set them aside for later use.
2. Remove the screws from the door and proceed to mark their positions on the overlay panel by using the handle as a guide.
3. Use a 3/16" (5mm) drill bit to make the holes on the overlay panel for the screws.
4. Insert the screws, making sure to leave the head of the screw flush with the surface of the panel (countersink screws if necessary).
5. Take the studs you saved in Step 1 and screw them back. They are now projecting from the face of the panel.
6. Place the handle over the mounting studs and, using the supplied Allen key, tighten the securing grub screws to fix the handle. Refer to "Installing a Stainless Steel Handle" (Refer to page 13).

If using a customer supplied handle(s):

1. Attach the handle to the overlay panel by using flat head or countersunk screws.
2. Unscrew the studs located on the front face of the door and save them for later possible use.

Installing the Bracket

Technical diagram showing a structural assembly with numbered components, likely for architectural or engineering reference.

Technical diagram showing two views of a rectangular panel with numbered annotations and directional arrows indicating movement or orientation.

Technical line drawing of a rectangular frame with dimension lines and corner markers (no text or symbols)

1. Lay the wooden panel (3) on a flat surface.
2. Place the bottom bracket (2) along the edge of the panel.
3. Attach the bracket (2) to the wooden panel by using three 12 " Phillips self-tapping screws (1).
4. Repeat steps 2-3 for the top bracket.

NOTE: The two brackets must be horizontally spaced according to the specific dimensions of your unit's door.

1. Prepare the unit for panel installation, by removing the lock bracket (8) and magnetic activator (5) from the bottom of the door and remove the magnetic activator (4) & hole plugs (6) from the top of

the door. This is done by removing the screws that attach the lock bracket and magnetic activators to the door.

1. We recommend you leave the factory-installed protective film to protect the door and prevent scratching while installing the panel.
2. Open the unit's door all the way. Then, carefully slide the bracketed wooden panel onto the unit's door (7).
3. Attach the bracket to the door by inserting four 12 " Phillips self-tapping screws (9) through the bracket and into the unit's door, two on each end of the bracket.
4. Reinstall the lock bracket, hole plugs, and magnetic activators.

OPERATING YOUR APPLIANCE

It is recommended that you install the appliance in a place where the ambient temperature is between 72^ and 78^ F ( 23^ to 26^ C). If the ambient temperature is above or below the recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. The expected temperature setting may not be reached.

Recommended Temperature Settings for Wine Cellars

Conservation	49 ~ 57°F	10 ~ 14°C
Red Wines	58 ~ 72°F	15 ~ 22°C
Dry/White Wines	48 ~ 57°F	9 ~ 14°C
Rosé Wines	49 ~ 51°F	10 ~ 11°C
Sparkling Wines	41 ~ 47°F	5 ~ 8°C

Control Panel with LED Display

54 °C + -

ON/OFF Power

To turn the appliance off, press and hold the ☉key for 5 seconds until the temperature display goes out. To turn the appliance on, press and hold the ☉key for 1 second until the temperature display lights up.

Light

To turn the interior light on/off, lightly touch and hold the key for 5 seconds. The interior light indicator will light up or go out to confirm the selection. The interior light indicator is the dot at the bottom right of the display.

UP+

Used to increase (warm) the set temperature by 1^ C/ 1^ F.

DOWN -

Used to decrease (cool) the set temperature by 1^ C/ 1^ F.

Light Indicator / Multi-key Function

The interior light indicator is the dot at the bottom right of the display. The interior light indicator will light up in showcase mode.

The interior light indicator will flash when the multi-key function is selected. To perform the multi-key function, lightly touch and hold the first key, then touch the rest key for at least 5 seconds and then release all the keys.

Setting the Temperature Control

• You can set the temperature by touching the UP and DOWN keys. When you push the two buttons at the same time, the LED readout will show the original temperature set previously. (The temperature preset at the factory is 54°F or 12°C for wine cooler and 38°F or 3°C for beverage cooler.)
• The temperature you are setting will increase by one degree each time you touch the Up symbol and will decrease by one degree each time you touch the DOWN symbol.
• The range of the temperature control is from 41°F/5°C to 68°F/20°C for wine cooler and from 36°F/2°C to 43°F/6°C for beverage cooler.
• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit will reappear in the display window.

Control Panel with LED Display

10 16 °C °F + -

8 12.000 + - + -

ON/OFF Power ⏻

To turn the appliance off, press and hold the ⏻ key for 5 seconds until the temperature display goes out. To turn the appliance on, press and hold the ⏻ key for 1 second until the temperature display lights up.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

LIGHT

Turn the interior light on and off with this switch.

DOWN —

Used to decrease (cool) the set temperature by 1°C/1°F.

Indicator Light

The indicator light is the dot at the bottom right of the display. The indicator light will be on when a multi-key function is selected. To perform a multi-key function, press and hold the first key, then press the second key for at least 5 seconds and then release both keys.

°F/°C Selector

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.

Display

is for the UPPER temperature zone and is for the LOWER temperature zone.
is for the LEFT temperature zone and is for the RIGHT temperature zone.

Setting the Temperature Control

• The unit has two separate temperature zones. The temperature of both zones can be set between 5°C and 20°C (41°F and 68°F). It can be used as a wine maturing cabinet or a wine serving cabinet. For maturing wine, the recommended temperature setting ranges of both zones should be between 11°C and 14°C (52°F and 57°F). For serving wine, the recommended temperature setting range of UPPER/LEFT zone should be between 5°C and 10°C (41°F and 50°F) which is ideal for serving champagne & white wine and the recommended temperature setting range of LOWER/RIGHT zone should be between 15°C and 20°C (58°F and 68°F) which is ideal for serving red wine.
• When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The preset temperature at the factory for UPPER/LEFT temperature zone is 8°C (46°F) and for LOWER/RIGHT temperature zone is 12°C (54°F).
• You can touch the left side UP and DOWN keys to control the internal temperature of the UPPER/LEFT temperature zone and touch the right side UP and DOWN keys to control the internal temperature of the LOWER/RIGHT temperature zone. When you touch either key at the first time, the display will show the last temperature set previously.
• IMPORTANT: For non-Twin Wine Conditioning System, the temperature set for the LOWER temperature zone must always be just as high as or higher than that in the UPPER temperature zone.
• The temperature that you desire to set will increase 1^ C or 1^ F if you touch the UP key once, on the contrary the temperature will decrease 1^ C or 1^ F if you touch the DOWN key once. The display flashes while you make the setting.
• After the temperature has been set, the display shows the current inner temperature of the particular temperature zone.
• To view the set temperature at any time, touch the UP or DOWN key, the set temperature will temporarily flash in the display for 5 seconds. Then the display shows the current inner temperature again.

Control Panel with LCD Display

12°C + -

ON/OFF Power

To turn the appliance off, lightly touch and hold the Key for 5 seconds until temperature display goes out. To turn the appliance on, lightly touch and hold the Key for 1 second until temperature display lights up.

°F/°C Selector %F

Set the temperature to be displayed in degree Fahrenheit or degree Celsius.

LIGHT

To turn the interior light on/off, lightly touch and hold the key for 5 seconds.

UP +

Used to increase (warm) the set temperature by 1^ C/ 1^ F.

DOWN —

Used to decrease (cool) the set temperature by 1^ C/ 1^ F.

Setting Selector

Select the temperature and humidity you want to set.

Symbols in the Display

Temperature or Error code display

Compressor is ON.

Heater is ON.

Defrosting mode.

DynaClima mode.

DEMO Eco Demo mode.

The interior light is in Showcase mode.

Warning

Audible tones signal

Child lock is activated

Wifi connection signal

8 Anti-condensation mode

Relative humidity display (Only display the humidity, cannot control it)

Multi-key Function

To perform the multi-key function, lightly touch and hold the first key, then touch the rest key for at least 5 seconds and then release all the keys.

Child Lock

If in 2 minutes or longer without touching any key, the child lock will be activated automatically for models with the control outside of cabinet. To cancel the lock, lightly touch the UP and DOWN keys simultaneously for at least 5 seconds until the symbol is go out.

Setting the Temperature Control

• The unit has a single adjustable temperature zone. The temperature can be set between 5°C and 20°C (41°F and 68°F) for wine cooler and between 2°C and 6°C (36°F and 43°F) for beverage cooler.
• When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The temperature preset at the factory is 12^ C ( 54^ F) (ideal maturing temperature).
• Touch the Setting Selector √ until the temperature you want to set is flashing. Then you can use the UP and DOWN keys to set the internal temperature as required. When you touch either key at the first time, the display will show the last temperature set previously.
• The temperature will increase 1^ C/ 1^ F if you touch the UP key once, or the temperature will decrease 1^ C/ 1^ F if you touch the DOWN key once. The display flashes while you make the setting.
• The set temperature will temporarily flash in the display for 5 seconds after the temperature has been set. Then the display shows the current inner temperature again.
• To view the set temperature at any time, touch the Setting Selector key, the set temperature will temporarily flash in the display for 5 seconds. Then the display shows the current inner temperature again.

Control Panel with LCD Display

08°C 12 RH NO + - ↓

ON/OFF Power

To turn the appliance off, lightly touch and hold the Key for 5 seconds until temperature display goes out. To turn the appliance on, lightly touch and hold the Key for 1 second until temperature display lights up.

^ F/ ^ C Selector ^ C/F

Set the temperature to be displayed in degree Fahrenheit or degree Celsius.

LIGHT

To turn the interior light on/off, lightly touch and hold the key for 5 seconds.

UP +

To increase (warm) the set temperature by 1°C or 1°F.

DOWN —

To decrease (cool) the set temperature by 1°C or 1°F.

Setting Selector

Select the temperature and humidity you want to set.

Symbols in the Display

OE	Temperature or Error code display for upper/left zone
IE	Temperature or Error code display for lower/right zone
※	Compressor is ON.
○	Heater is ON.
A	Defrosting mode.
※	DynaClima mode.
DEMO	Eco Demo mode.
※	The interior light is in Showcase mode.
A	Warning
○	Audible tones signal
○	Child lock is activated
(○)	Wifi connection signal
∅	Anti-condensation mode
# NO	Relative humidity display (Only display the humidity, ca

Multi-key Function

To perform the multi-key function, lightly touch and hold the first key, then touch the rest key for at least 5 seconds and then release all the keys.

Child Lock

If in 2 minutes or longer without touching any key, the child lock will be activated automatically for models with the control outside of cabinet. To cancel the lock, lightly touch the UP and DOWN keys simultaneously for at least 5 seconds until the symbol is go out.

Setting the Temperature Control

• The unit has two separate temperature zones. The temperature of both zones can be set between 5°C and 20°C (41°F and 68°F). It can be used as a wine maturing cabinet or a wine serving cabinet. For maturing wine, the recommended temperature setting ranges of both zones should be between 11°C and 14°C (52°F and 57°F). For serving wine, the recommended temperature setting range of UPPER/LEFT zone should be between 5°C and 10°C (41°F and 50°F) which is ideal for serving champagne & white wine and the recommended temperature setting range of LOWER/RIGHT zone should be between 15°C and 20°C (58°F and 68°F) which is ideal for serving red wine.
• When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The preset temperature at the factory for UPPER/LEFT temperature zone is 8^ C ( 46^ F) and for LOWER/RIGHT temperature zone is 12^ C ( 54^ F).
• Touch the Setting Selector until the temperature you want to set is flashing. Then you can use the UP and DOWN keys to set the internal temperature as required. When you touch either key at the first time, the display will show the last temperature set previously.

• The temperature will increase 1^ C/ 1^ F if you touch the UP key once, or the temperature will decrease 1^ C/ 1^ F if you touch the DOWN key once. The display flashes while you make the setting.

• The set temperature will temporarily flash in the display for 5 seconds after the temperature has been set. Then the display shows the current inner temperature again.

• To view the set temperature at any time, touch the Setting Selector key, the set temperature will temporarily flash in the display for 5 seconds. Then the display shows the current inner temperature again.

Settings Mode

Certain settings on the wine cabinet can only be selected in settings mode. In Settings mode only the UP and DOWN keys of lower/right zone are functional for dual zone LED display units.

Touch and hold the UP key for 5 seconds to enter and leave Settings mode. The appliance will leave Settings mode automatically after approximately one minute.

°F/°C Selection

1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode.
2. Use the UP and DOWN keys to select the temperature display setting in Fahrenheit or Celsius degree.
3. Touch and hold the UP key for 5 seconds to confirm the selection.

Display Brightness

1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER key once.
2. Use the UP and DOWN keys to select the brightness of the display when the door is close. When the door is open, the display brightness returns to its normal level.
3. d0: off
   • d1: dimmest setting (default)
   • d2: medium setting
   • d3: brightest setting
4. Touch and hold the UP key for 5 seconds to confirm the selection.

Interior Lighting Brightness

1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER key twice.
2. Use the UP and DOWN keys to select the brightness of the interior lighting when the door is close. When the door is open, the interior lighting returns to its normal level.
3. L0: off when the door is close or open
   • L1: dimmest setting
   • L2: medium setting
   • L3: brightest setting (default)
4. Touch and hold the UP key for 5 seconds to confirm the selection.

Fan Mode

1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER key three (3) times.
2. Use the UP and DOWN keys to select the fan mode.
   • F0: Silent mode - Energy saving mode (default)
   • F1: DynaClima mode - half time
   • F2: DynaClima mode - full time
3. Touch and hold the UP key for 5 seconds to confirm the selection.

Audible Tones

1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER key four (4) times.

2. Use the UP and DOWN keys to select the audible tones.

3. S0: sensor tone ON, alarm tone OFF
   • S1: sensor tone ON, alarm tone ON (default)
   • S2: sensor tone OFF, alarm tone OFF
   • S3: sensor tone OFF, alarm tone ON

4. Touch and hold the UP key for 5 seconds to confirm the selection.

Interior Light

The interior light makes it easy to view your wine labels and enhances the display of your collection. Touching and holding the LIGHT key for 5 seconds allows you to toggle between 2 modes of operation for the internal lights: functional (default) mode and showcase mode. If you are in functional (default) mode (also named energy saving mode), the lights will turn on only when the door is open. If you are in showcase mode, the lights will be on whether or not the door is open.

The unit is equipped with LED-type lights, and they are designed for extremely long life. Thanks to the LED lighting, the wine will not be adversely affected by heat or UV light. But they are not user serviceable. To change them pls contact the service department.

NOTE: Please use only the same type of LED light fittings originally provided by the manufacturer.

If your model is provided a TriColor lighting, you can select the color of interior light - amber, white, and blue by touching the LIGHT key. Touching the LIGHT key toggles between single color mode and dynamic color mode. In the dynamic color mode, the interior light will start to cycle through the 3 available colors. Touching the LIGHT key once when the desired color is on, your interior light will be changed to that color. To change back to the dynamic color mode, touch the LIGHT key again.

Sabbath Mode

Sabbath mode is available for the observance of certain religious holidays. This mode turns off the displays, interior light and audible alarms and prevents them from turning on again. Normal cooling operations will still take place.

To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at least 5 seconds. The displays and interior lights will go out to confirm that Sabbath mode is ON.

Sabbath mode can be canceled by repeating the above process. Sabbath mode will automatically turn off after 96 hours.

Temperature Memory Function

In the event of a power interruption (power surge, breaker switch, etc.), the unit will remember the previous temperature settings, and when the power is recovered, the cabinet temperature will return to the same setting temperature as before power was lost.

Temperature Alarm/Door Alarm

- An audible alarm sounds if the storage temperature is not cold enough. The temperature display flashes at the same time.

- The cause of the temperature being too high may be:

○ Warm items were placed inside
- Too much warm ambient air flowed in when rearranging and removing contents
- Power failure for some time
- The appliance is faulty.

- The audible alarm is automatically silenced, and the temperature display stops flashing when the temperature is sufficiently cold again.

- If the door has been left open for more than 60 seconds, the alarm will sound. Pressing the any key once will switch off the audible alarm.

DYNACLIMA / SILENT Mode

The appliance has two different running modes. In Silent mode once the required temperature is reached, the appliance will run without the fan. In DynaClima mode the fan cycles on and off to circulate the air even after the required temperature is reached. This ensures consistent humidity and temperature distribution in the wine cooler, creating perfect conditions for long term storage.

Using the dynamic mode increases the level of noise in operation.

Door Lock

If the unit is provided with a lock system, the keys are located inside the plastic bag that contains the User Manual. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation, making sure the metal pin is engaged completely. Remove the key and put it in a secure place for safekeeping.

Cantilevered Shelves

• Any of the shelves can be removed to store larger items.
• When removing the shelf, make sure to have the door all the way open and remove all items first. Hold the front of the shelf, and then gently lift up and move out toward you.
• In order to replace the shelf, hold the shelf at an angle so the front is higher than the back, and then insert the top hook into the notch of clip-in strip. Then, lower the shelf and insert the bottom shelf hook into the notch of clip-in strip.

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

CAUTION: When removing or replacing the shelf, use caution not to scratch the sides of the unit.

Glass Shelves

To prevent damaging the door gasket, make sure to have the door all the way open when pulling the shelves out of the rail compartment.

• Any of the shelves can be removed to store larger items.
• When removing the shelf from the rail compartment, make sure to remove all items first. Then move the shelf to the position where the notch of the shelf is exactly under the plastic post and lift the shelf. To replace the shelf, repeat the steps described above in reverse.

Pure geometric diagram of a rectangular frame with diagonal lines and corner markers (no text or symbols)

CAUTION: When removing or replacing the shelf, use caution not to scratch the sides of unit.

Wood Shelves

To prevent damaging the door gasket, make sure to have the door all the way open when pulling the shelves out of the rail compartment.

• Any of the shelves can be removed to store larger items.
• When removing the shelf from the rail compartment, make sure to remove all items first. Then move the shelf to the position where the notch of the shelf is exactly under the plastic post and lift the shelf. To replace the shelf, repeat the steps described above in reverse.

Isometric line drawing of two rectangular slatted panels with mounting holes (no text or symbols)

CAUTION: When removing or replacing the shelf, use caution not to scratch the sides of the unit.

Rail Shelves

To prevent damaging the door gasket, make sure to have the door all the way open when pulling the shelves out of the rail compartment.

• Any of the shelves can be removed to store larger items.
• When removing the shelf from the rail compartment, make sure to remove all items first. Press the right slide release lever down and at the same time lift the corresponding left slide lever up and pull the shelf out until it is free of tracks and the cabinet.
• To remove the tracks, lift the track front straight up and then pull the track rear straight outward to release the track hooks from the wall slots. In order to replace the tracks, repeat this procedure in reverse.
• In order to replace the shelf, align the left and right slide channels with the tracks in the cabinet.

Technical line drawing of a structural assembly with an inset showing a detail view of a corner detail (no text or symbols present)

Ensuring an even track engagement on both sides, gently push the shelf into the cabinet until the tabs lock into place.

NOTE: Make sure the tabs on the full extension shelf guides are fully engaged before loading any bottles. Pull the shelf out all the way to the STOP position and push back in several times to make sure the locking tabs are properly engaged.

CAUTION: When removing or replacing the shelf, use caution not to scratch the sides of unit.

Defrosting

• The unit defrosts automatically in normal operating conditions.
• The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the drainage channel behind the rear wall of the unit and flows through the drainage hole into the drip tray near the compressor where it evaporates.
• However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.

Storage

Bottles can differ in size. Accordingly, the actual number of bottles you can store may vary.

The approximate maximum bottle capacity can be achieved when storing traditional 750 ml Bordeaux bottles in bulk storage.

You may load your wine bottles in single rows or by stacking while taking note of the following: if you do not have enough bottles to fill your wine cellar, it is better to distribute the load throughout the wine cellar so as to avoid “all on top” or “all below” type loads.

• Keep small gaps between the walls and the bottles to allow air to circulate. As in an underground cellar, air circulation is important to prevent mold and for a more homogeneous temperature within the cellar.
• To facilitate air circulation, do not overload your wine cellar.
• Avoid obstructing the internal fans (located inside on the rear panel of the wine cellar).
  • To prevent bottles from falling, do not try to slide the shelves outward beyond the fixed position.
• Do not pull out more than one loaded shelf at a time as this may cause the wine cellar to tilt forward if not properly installed.

CARE AND MAINTENANCE

Cleaning your Appliance

CAUTION: Failure to unplug the appliance during cleaning could result in electrical shock or other personal injury.

• Turn off the power, unplug the appliance, and remove all items, including shelves.
- Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking soda to a quart of water).
- Wash the shelves with a mild detergent solution.
- Wring excess water out of the sponge or cloth when cleaning the area where the controls are located, or any electrical parts.
- Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean, soft cloth.
- Do not use steel wool or a steel brush on the stainless steel.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect the contents.

Vacations

• Short vacations: Leave the appliance operating during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for several months, remove all items, and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

Moving your Appliance

1. Remove all items.
2. Securely tape down all loose items (shelves) inside your appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the outside of the appliance with a blanket or similar item.

Energy-Saving Tips

- The appliance should be located in the coolest area of the room, away from heat-producing appliances and out of direct sunlight.

• Ensure that the unit is adequately ventilated. Never cover air vents.
• Do not keep the door open any longer than necessary.

TROUBLESHOOTING

You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

PROBLEM	POSSIBLE CAUSE	REMEDY
Appliance does not operate.	Appliance is not connected to a power supply.The appliance is turned off.Tripped circuit breaker or a blown fuse.	Connect the appliance.Switch on the appliance.Switch on circuit breaker or replace fuse.
Appliance is not cold enough.	The temperature is not set correctly.The ambient temperature could require a lower set temperature setting.The door was opened too often.The door was not closed completely.Door is not hermetically sealed.The condenser is dirty.The ventilation opening is blocked or too dusty.	Check the set temperature.Set a lower temperature.Do not open the door more often than necessary.Close door properly.Check the door seal and clean or replace.Clean the condenser when necessary.Clear the obstructions and clean off the dust.
Appliance turns itself on and off frequently.	The room temperature is higher than average.A large number of items have been added to the unit.The door is opened too often.The door is not closed completely.The door gasket does not seal properly.	Put the appliance in a cooler place.Leave the appliance to work for a while until the set temperature has been reached.Do not open the door more often than necessary.Close door properly.Check the door seal and clean or replace.
The light does not work.	Appliance is not connected to a power supply.Tripped circuit breaker or a blown fuse.The light was switched off on the control panel.	Connect the appliance.Switch on circuit breaker or replace fuse.Switch on the light.
Vibrations	The appliance is not properly leveled.	Level the appliance with the adjustable feet.
The appliance seems to make too much noise.	A rattling noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your appliance.If temperature fluctuations occur, the contraction and expansion of the inner walls may cause popping and crackling noises.
	The appliance is not properly leveled.	Level the appliance with the adjustable feet.
The door will not close properly.	The appliance is not properly leveled.The door was reversed and not properly re-installed.The gasket is dirty.The shelves are out of position.	Level the appliance with the adjustable feet.Check the door hinge and reassemble correctly.Clean the door gasket.Check the shelves and refit correctly.
Display “E0”, “E1”. “E2”, “E3”, “E4”, “E5”, “E6” or “E7”.	“E0” indicates a communication error for 3- zone models.“E1” or “E2” indicates that the air temperature sensor has failed.“E3” or “E4” indicates that the defrost sensor in the evaporator has failed.“E5” indicates a defrost heater failure.“E6” indicates a solenoid valve failure.“E7” indicates a door switch failure.	Call for service.
The alarm sounds and the temperature display flashes.	Has the appliance door been open for longer than 60 seconds? If not, then the temperature has risen higher or fallen lower than the set temperature. This could be due to:The appliance door has been opened too often.The ventilation opening is covered or too dusty.A lengthy interruption to the power supply.A large number of items have been added to the unit.	If yes, close the door.Do not open the door more often than necessary.Clear the obstructions and clean off the dust.Let the appliance work for a while until the set temperature has been reached.
The icon “--” is lit up and flashing in the temperature display.	The display temperature is out of range.	Only temperatures within the range 0~99°F/-9~37°C can be displayed. If the temperature is not within this range, the icon “--” will be displayed instead. This is normal.

If you have checked the table above and find that you still need help with your appliance, call our Customer Service facility at 800-932-4267 between 9:00AM and 5:00PM ET or visit our website. https://www.summitappliance.com/support at any time. We will do our best to answer your questions.

CALIFORNIA CARB/SNAP DISCLOSURE

This product uses eco-friendly hydrocarbon refrigerant and fully complies with California CARB regulations.

However, we are required by California Law to provide the following disclosure statement in every product sold in California.

"This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited Substances' for that specific end-use, in accordance with California Code of Regulations, title 17, section 95374. This disclosure statement has been reviewed and approved by Felix Storch, Inc. and Felix Storch, Inc. attests, under penalty of perjury, that these statements are true and accurate."

This product does not use any refrigerants on the 'List of Prohibited Substances'

NOTES

NOTES

LIMITED WARRANTY

ONE-YEAR LIMITED WARRANTY

Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects. Plastic parts, shelves, and cabinets are warranted to be manufactured to commercially acceptable standards, and are not covered from damage during handling or breakage.

5-YEAR COMPRESSOR WARRANTY

1. The compressor is covered for 5 years.
2. Replacement does not include labor.

ITEMS WARRANTOR WILL NOT PAY FOR:

1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace or repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as filters) are excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by warrantor.
4. Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
6. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR. WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.

WARNING: This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer.

For more information go to www.P65Warnings.ca.gov

Note: Nickel is a component in all stainless steel and some other metal components.