12.301300-06 - Car stereo PIONEER - Free user manual and instructions

USER MANUAL 12.301300-06 PIONEER

Pioneer sound. vision. soul

Installation manual for:

Toyota Avensis 2004-->

Product photo of a small electronic component with visible circuitry and mounting brackets (no text or symbols)

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 1x Replacement panel for non motorized screen
* 2X Replacement panel for motorized screen
* 2X Mounting plates
* 2X Mounting spaces
* 2X Radio keys
* 4X Screws

Black rectangular frame with rounded corners on a light background (no text or symbols)

You need

OEM Bezel

Part Number : 55405-05160

Use this hole Use this hole

Pure electrical circuit lines without any symbols

Pioneer HD1BT

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 14 & 16 marked with an arrow. Measured from left to right.

Close-up of a mechanical device with multiple ports and mounting holes (no visible text or symbols)

Close-up of a metallic component with a copper-colored connector and directional arrows indicating movement (no text or symbols)

Pioneer Avic D3

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 12 & 14 marked with an arrow. Measured from left to right.

Pioneer sound. vision. soul

2-DIN 12.301300-06

Toyota Avensis 2004 -->

1

Interior view of a car dashboard with central touchscreen and directional arrows indicating left and right motion (no text or symbols visible)

Remove the dashboardpanels around the radio at the location of the arrows.

2

Interior view of a car dashboard with directional arrows indicating traffic flow (no text or symbols visible)

Remove the frame above the radio by using a plastic wedge at the location of the arrows.

3

Interior view of a car dashboard with directional arrows pointing to the dashboard panel (no visible text or symbols)

Remove the original radio at the location of the arrows. The radio is tighten by four screws.

4

Interior view of a car showing internal components and wiring (no visible text or symbols)

7

Metal automotive component with mounting holes and internal brackets (no visible text or symbols)

Place the new metal bracket and the climate control unit between the OEM radio brackets. Tighten the climate control with the four original screws.

5

Close-up of a mechanical component with yellow arrows pointing to features (no visible text or symbols)

Remove the original OEM metal brackets from the radio and the climate control unit. This is tigten by twelve screws.

6

Exterior view of a car infotainment device with digital displays and control knobs (no visible text or labels)

Remove the original radio from the climate control. Slide the climate control unit to the right.

8

Close-up of a silver and black electronic device with a digital display and control knob (no visible text or symbols)

Place the OEM replacement panel on the climate control unit by sliding it to the left.

9

Interior view of a car dashboard with air filters and a digital display (no visible text or symbols)

Place the OEM replacement panel with the climate control unit and the metal bracket into the dashboard.

10

Interior view of a car dashboard with air conditioners and a central touchscreen display (no visible text or symbols)

Place the new headunit.

Interior view of a car dashboard with air conditioners and control panels (no visible text or symbols)

Place the radio trim and replace all dashboardpanels in reverse order.

Pioneer

sound. vision. soul

Installation manual for:

Toyota Auris

Exterior view of a device housing with plastic components and metal brackets (no visible text or symbols)

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 1x Replacement panel for non motorized screen
* 2X Replacement panel for motorized screen
* 2X Mounting plates
* 2X Mounting spaces
* 2X Radio keys
* 4X Screws

Exterior view of a rectangular car back panel (no text or symbols visible)

You need

OEM Bezel

Part Number :

55405-12A00 metal bronze

55405-02130 black

Use this hole Use this hole

Pure electrical circuit lines without any symbols

Pioneer HD1BT

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 14 & 16 marked with an arrow. Measured from left to right.

Close-up of a mechanical device with multiple ports and mounting holes (no visible text or symbols)

Close-up of a metallic connector with mounting holes and internal arrows indicating movement (no text or symbols)

Pioneer Avic D3

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 12 & 14 marked with an arrow Measured from left to right.

Pioneer sound. vision. soul

2-DIN 12.301300-06

Toyota Auris

1

Interior view of a car dashboard with directional arrows indicating traffic flow (no text or symbols visible)

Remove the dashboardpanels around the radio at the location of the arrows.

2

Interior view of a car dashboard with control panel and steering wheel (no visible text or symbols)

Remove the top air shaft by pulling it forwards.

3

Interior view of a car dashboard with directional arrows indicating traffic flow (no text or symbols visible)

Remove the original radio at the location of the arrows this is tighten by four screws.

4

Interior view of a car dashboard with illuminated airbags and control panel (no visible text or symbols)

7

Interior view of a car dashboard with integrated seats and air conditioners (no visible text or symbols)

Place the metal bracket into the dashboard between the metal OEM brackets.

5

Close-up of a mechanical component with yellow arrows pointing to internal features (no visible text or symbols)

Remove the original OEM metal brackets from the radio. This is tighten by eight screws.

6

Close-up of a green printed circuit board with visible traces and pads (no text or symbols)

Place the OEM radio brackets on the metal bracket for the new headunit. This will fit in the holes of the metal bracket(if needed mount it with screws).

8

Interior view of a car dashboard with airbags and controls (no visible text or symbols)

Place the new headunit

9

Interior view of a car dashboard with illuminated controls and a central touchscreen display (no visible text or symbols)

Place the OEM replacement panel.

10

Interior view of a car dashboard and steering wheel (no visible text or symbols)

Place the radio trim and place all dashboard panels in reverse order.

Pioneer

sound. vision. soul

Installation manual for:

Toyota Corolla Verso

Exterior view of a modular device housing with metal brackets and connectors (no text or symbols visible)

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 1x Replacement panel for non motorized screen
* 2X Replacement panel for motorized screen
* 2X Mounting plates
* 2X Mounting spaces
* 2X Radio keys
* 4X Screws

Metallic rectangular device with a recessed top and side slot, no visible text or symbols

You need

OEM Bezel

Part Number: 55417-0F010

Use this hole Use this hole

Pure electrical circuit lines without any symbols

Pioneer HD1BT

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 14 & 16 marked with an arrow. Measured from left to right.

Close-up of a mechanical or electronic device with multiple ports and a central connector (no visible text or symbols)

Close-up of a metallic connector with copper contacts and mounting holes (no text or symbols visible)

Pioneer Avic D3

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 12 & 14 marked with an arrow. Measured from left to right.

Pioneer sound. vision. soul

2-DIN 12.301300-06

Toyota Corolla Verso

1

Interior view of a car dashboard with directional arrows pointing to the dashboard (no visible text or symbols)

Remove the air shafts at the left and the right side of the OEM radio by using a plastic wedge.

2

Interior view of a car dashboard with digital displays and directional arrows (no visible text or symbols)

Remove the climate control unit. This is tighten by two screws and pull the unit forwards.

3

Interior view of a car dashboard with a digital display and directional arrows indicating components (no visible text or symbols)

Remove the original radio by removing the four screws at the location of the arrows.

4

Interior view of a car showing the dashboard and internal components (no visible text or symbols)

7

Interior view of a car showing internal compartments and dashboard (no visible text or symbols)

Place the metal bracket into the dashboard between the metal OEM brackets.

5

Close-up of a mechanical device with yellow arrows pointing to internal components (no visible text or symbols)

Remove the original OEM metal brackets from the radio. This is tighten by four screws

6

Metallic electronic component with mounting holes and a handle, shown against a plain background (no text or symbols visible)

Place the OEM metal brackets on the metal bracket of the new headunit. This will fit into the holes of the metal bracket(if needed mount it with screws).

8

Exterior view of a silver automotive air conditioner unit with control panel and yellow arrows pointing to the front panel (no text or symbols visible)

Remove the warning lights switch unit from the original panel and place it in the replacement panel.

9

Interior view of a car dashboard with visible camera and electronics (no text or symbols)

Place the new headunit.

10

Interior view of a car dashboard with integrated vehicle display and control panel (no visible text or symbols)

Place the new OEM replacement panel.

Interior view of a car dashboard with steering wheel and digital display (no visible text or symbols)

Place the radio trim and replace all dashboardpanels in reverse order.

Pioneer sound. vision. soul

Installation manual for:

Toyota Corolla 2008-->

Product photo of a small electronic device housing with metal brackets and terminal blocks (no visible text or symbols)

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 1x Replacement panel for non motorized screen
* 2X Replacement panel for motorized screen
* 2X Mounting plates
* 2X Mounting spaces
* 2X Radio keys
* 4X Screws

Black rectangular object with mounting holes and a blank center area (no text or symbols)

You need

OEM Bezel

Part Number: 55406-12A71

Use this hole Use this hole

Pure electrical circuit lines without any symbols

Pioneer HD1BT

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 14 & 16 marked with an arrow. Measured from left to right.

Close-up of a mechanical device with multiple ports and mounting holes (no visible text or symbols)

Close-up of a metallic connector with copper contacts and mounting holes (no text or symbols visible)

Pioneer Avic D3

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 12 & 14 marked with an arrow Measured from left to right.

Pioneer sound. vision. soul

2-DIN 12.301300-06

Toyota Corolla 2008 -->

1

Interior view of a car dashboard with directional arrows pointing to the dashboard screen (no text or symbols visible)

Remove the dashboardpanels around the radio at the location of the arrows.

2

Interior view of a car dashboard with air conditioners and a central touchscreen display (no visible text or symbols)

Remove the top air shaft by pulling it forwards.

3

Interior view of a car dashboard with digital display and steering wheel (no visible text or symbols)

4

Interior view of a car dashboard with integrated navigation and display screens (no visible text or symbols)

Remove the original radio this is tigten by four screws.

5

Interior view of a car showing the dashboard and air intake manifold (no visible text or symbols)

6

Close-up of a mechanical device with yellow arrows pointing to internal components (no visible text or symbols)

Remove the OEM brackets from the original radio. This is tighten by eight screws.

7

Metal mechanical component with mounting holes and a U-shaped bracket (no visible text or symbols)

Place the OEM radio brackets on the metal bracket of the new headunit. This will fit in the holes of the metal bracket(if needed mount it with screws).

8

Interior view of a car dashboard with visible airbags and control panels (no text or symbols)

Place the metal bracket into the dashboard between the metal OEM brackets.

9

Interior view of a car dashboard with integrated car display and steering wheel (no visible text or symbols)

Place the OEM replacement panel.

10

Interior view of a car dashboard with air conditioners and a central touchscreen display (no visible text or symbols)

Place the new headunit and replace the dashboard panels in reverse order.

II

Interior view of a car dashboard with air conditioners and a digital display (no visible text or symbols)

Place the radio trim and replace al dashboardpanels in reverse order.

Pioneer

sound. vision. soul

Installation manual for:

Toyota Yaris 2005-->

Product photo of a small electronic device housing with two metal bracket components and terminal blocks (no visible text or symbols)

Installation kit includes the following items:

* 1X 2-ISO 100 mm. metal bracket
* 1x Replacement panel for non motorized screen
* 2X Replacement panel for motorized screen
* 2X Mounting plates
* 2X Mounting spaces
* 2X Radio keys
* 4X Screws

Exterior view of a modern office building (no signage)

You need OEM bezel
Part Number : 55405-0D260-B0

Two black plastic blade tools with curved ends and triangular tips, shown against a plain background (no text or symbols)

You need OEM bezel
Part Number: 55436-52010-B0 left
55435-52010-B0 Right

Use this hole Use this hole

Pioneer HD1BT

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 14 & 16 marked with an arrow. Measured from left to right.

Close-up of a mechanical device with multiple ports and mounting holes (no visible text or symbols)

Pure electrical circuit lines without any symbols

Pioneer Avic D3

We advice to use the following positions. Other positions are also possible.

Use position 1 marked with a cross. Use position 12 & 14 marked with an arrow. Measured from left to right.

Pioneer sound. vision. soul

2-DIN 12.301300-06

Toyota Yaris 2005-->

1

Interior view of a car dashboard with yellow arrows pointing to the dashboard controls (no visible text or symbols)

Remove the sub-binding signal radioed the radio at the location of the arrows.

2

Interior view of a car dashboard and steering wheel (no visible text or symbols)

3

Interior view of a car dashboard with illuminated air vent and control panel (no visible text or symbols)

Lift up the panel above the air shafts at the location of the arrows by using a plastic wedge.

4

Interior view of a car dashboard with illuminated air vent and control panel (no visible text or symbols)

Remove the OEM radio at the location of the arrows. The radio is tighten by four screws.

5

Mechanical component with yellow arrows indicating features, no visible text or symbols

Remove the original OEM metal brackets from the radio. This is tighten by eight screws.

6

Close-up of a metallic mechanical component with mounting holes and a circular hole (no visible text or symbols)

Place the OEM radio brackets on the metal bracket of the new headunit. This will fit in the holes of the metal bracket(if needed mount it with screws).

7

Interior view of a car dashboard with integrated air vent and control panel (no visible text or symbols)

Place the metal bracket into the dashboard between the metal OEM brackets.

8

Front view of a car air conditioner unit with digital display and control knobs (no visible text or symbols)

Remove the air shafts from the original radio and replace them in the OEM replacement panel.

9

Interior view of a car dashboard with illuminated air vent and steering wheel (no visible text or symbols)

Place the OEM replacement panel.

10

Two black sculptor-like objects with pointed tips, displayed against a plain white background (no text or symbols)

You need the OEM side dashboard panels for placing the new headunit.

11

Interior view of a car dashboard with steering wheel and digital display (no visible text or symbols)

Place the new headunit and the side panels

Interior view of a car dashboard with air conditioner and control panel (no visible text or symbols)

Place the radio trim.