AXESS

ANC-CHH1 - Headphones AXESS - Free user manual and instructions

Find the device manual for free ANC-CHH1 AXESS in PDF.

📄 8 pages English EN Download 💬 AI Question
Notice AXESS ANC-CHH1 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about ANC-CHH1 AXESS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Headphones in PDF format for free! Find your manual ANC-CHH1 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ANC-CHH1 by AXESS.

USER MANUAL ANC-CHH1 AXESS

ANC T-Harnesses have vehicle specific applications.

Please visit AxxessInterfaces.com for the latest and up to date application information.

Things to Know

• Active noise cancellation is an OE module that helps reduce unwanted background noise.
Microphones mounted throughout the vehicles are used to monitor sound levels and frequencies inside the vehicle's cabin. The factory ANC generates an inverted signal from the factory speakers to cancel out unwanted cabin noise. The ANC-CHH1 bypasses that factory system, allowing for the installation of aftermarket equipment.
- It is recommended that a polarity tester and tone generator be used before connecting your aftermarket equipment.
- Some vehicle require the addition of load resistors, there are multiple options available. We recommend AX-LR20, AX-LR39, and AX-LR60.
• Proper termination of loose wires is required.

TABLE OF CONTENTS

Things to Know....1

Application and ANC module location Chart.....2

Connections

Bypassing ANC only 3

Adding a Subwoofer and Amplifier to Your Factory System Bypassing factory ANC mics..4

Adding a 4 Channel Amplifier-Entire System with ANC Bypass....5

Specifications....6

• Digital Multi-meter

- Test Tones

APPLICATION AND ANC MODULE LOCATION CHART

Year RangeMake ModelQualifier Location
2019-2022 RAM1500 Non-Amplified w/ ANC Module Under Driver's seat
2019-2022 RAM2500 Non-Amplified w/ ANC Module Left End of Dash
2019-2022 RAM3500 Non-Amplified w/ ANC Module Left End of Dash
2019-2021 JeepCherokee Non-Amplified w/ ANC Module Right Side of Dash above glove box
2015-2016 JeepGrand Cherokee Non-Amplified w/ ANC Module Behind Right Rear Quarter Panel
2017-2022ChryslerPacificaNon-Amplified w/ ANC ModuleRight Side of glove box, above kick panel

AXESS ANC-CHH1 - APPLICATION AND ANC MODULE LOCATION CHART - 1

text_image RAM 1500

AXESS ANC-CHH1 - APPLICATION AND ANC MODULE LOCATION CHART - 2

text_image RAM 2500/3500

AXESS ANC-CHH1 - APPLICATION AND ANC MODULE LOCATION CHART - 3

text_image Jeep Cherokee

AXESS ANC-CHH1 - APPLICATION AND ANC MODULE LOCATION CHART - 4

text_image Jeep Grand Cherokee 3 4

AXESS ANC-CHH1 - APPLICATION AND ANC MODULE LOCATION CHART - 5

text_image Pacifica

BYPASSING ANC ONLY

AXESS ANC-CHH1 - BYPASSING ANC ONLY - 1

text_image ANC Module T-Harness Installation Location ANC CHH1 can be used for adding an LOC or just as an ANC bypass ANC Factory Harness Connect to LOC Connect if Adding Sub To OE Speakers Connect Not Used To OE Speakers

ADDING A SUBWOOFER AND AMPLIFIER TO YOUR FACTORY SYSTEM BYPASSING FACTORY ANC MICS
AXESS ANC-CHH1 - BYPASSING ANC ONLY - 2

text_image ANC Module T-Harness Installation Location ANC Factory Harness Connect to LOC Connect if Adding Sub To OE Speakers Connect ANC-CHHT can be used for adding an LOC or just as an ANC bypass To Amp Input Instructions Available Online AXXESS GND +12V REM IN REM OUT AXX-LOC2.2-PRO Remote Turn On To AMP Turn On Not Used To OE Speakers

ADDING A 4 CHANNEL AMPLIFIER/ENTIRE SYSTEM WITH ANC BYPASS
AXESS ANC-CHH1 - BYPASSING ANC ONLY - 3

text_image ANC Module T-Harness Installation Location ANC CHH1 can be used for adding an LOC or just as an ANC bypass Connect to LOC Connect if Adding Sub Not Used To Amp Input Instructions Available Online AX-LOC4.4-PRO AXXESS™ GND +32V REM IN REM OUT 200Ω Ground SOLUTION Remote Turn On To AMP Turn On AX-LOC4.4-PRO MAXIMUM INPUT MODE LPF RCH 4CH 2CH OFF ON AAX-WHI REAR LEVEL 900ST REM DC AUDIO TURN ON MODE RSPRCL POWER 200Ω 60Ω 20Ω LOADS SELECT To OE Speakers Connect Run to Aftermarket Amplifier(s). Connect to the Aftermarket Amplifier Speaker Outputs. To OE Speakers

SPECIFICATIONS: ANC-CHH1 T-HARNESS

SPECIFICATIONS

Function Wire Color
12 Volt Constant Yellow
Chassis Ground Black
Acc/Ignition Red
Front Left + White
Front Left - White/Black
Front Right + Gray
Front Right - Gray/Black
Rear Left + Green
Rear Left - Green/Black
Rear Right + Purple
Rear Right - Purple/Black

AXESS ANC-CHH1 - SPECIFICATIONS: ANC-CHH1 T-HARNESS - 1

ANC-CHH1 T-HARNESS

INSTALLATION INSTRUCTIONS

Having difficulties? We're here to help.

Contact our Tech Support line at:

385-257-1187

Or via email at:

techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 5:00 PM

Sunday: 10:00 AM - 4:00 PM

AXESS ANC-CHH1 - INSTALLATION INSTRUCTIONS - 1

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills b enselling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call

386-672-5771 for more information and take steps toward a better tomorrow.

AXESS ANC-CHH1 - INSTALLATION INSTRUCTIONS - 2

Metra recommends MECP certified technicians

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AXESS

Model : ANC-CHH1

Category : Headphones