AXLOC-CH3 - Unknown Axxess - Free user manual and instructions

Product Type	Line Output Converter (LOC)
Brand	AXESS
Model	AXLOC-CH3
Application	Chrysler 300/300C (2011-2014), Dodge Charger (2011-2014), Dodge Journey (2011-2020)
Power Output	55 watts per channel
Remote Trigger	12V, 500mA, signal-sense activated
Input Type	Speaker-level (from factory radio)
Output Type	Low-level RCA (2 channels)
Gain Control	Included external gain controller (BASS KNOB)
Included Components	Wiring harness, gain controller, remote wire, auxiliary cable
Required Tools	Crimping tool, solder gun, wire cutter, zip-ties
Installation Note	Disconnect negative battery terminal before installation
Compatibility	For non-amplified vehicles only
Dimensions (approx)	3.0 x 2.0 x 1.0 inches
Weight (approx)	0.2 lbs
Warranty	See manufacturer documentation
Maintenance	Keep dry and clean; no moving parts
Safety	Disconnect battery before installation; secure all connections
Spare Parts	Contact manufacturer or distributor

Frequently Asked Questions - AXLOC-CH3 Axxess

What is a line output converter (LOC)?

A line output converter (LOC) converts speaker-level audio signals from a factory radio into low-level RCA signals that can be used by aftermarket amplifiers. The AXESS AXLOC-CH3 is designed for Chrysler and Dodge vehicles.

Which vehicles are compatible with AXLOC-CH3?

The AXLOC-CH3 is compatible with Chrysler 300/300C (2011-2014), Dodge Charger (2011-2014), and Dodge Journey (2011-2020). It is intended for non-amplified factory systems.

How do I install the AXLOC-CH3?

Disconnect the negative battery terminal. Unplug the factory radio harness and connect the AXLOC-CH3 harness in-line. Mount the gain controller, run RCA cables to the amplifier, and connect the remote wire. Secure all connections before testing.

What is the purpose of the gain controller?

The gain controller (BASS KNOB) allows you to adjust the output level of the LOC to match the amplifier's input sensitivity, preventing distortion and optimizing sound quality.

How is the remote wire activated?

The AXLOC-CH3 features signal-sense technology: it detects audio signal from the speaker wires and automatically triggers the 12V, 500mA remote output. No separate remote connection from the radio is needed.

Can I use the AXLOC-CH3 with amplified factory systems?

No, the AXLOC-CH3 is designed specifically for non-amplified vehicles. If your vehicle has a factory amplifier, use a different LOC or integration solution.

Do I need to disable active noise cancellation (ANC)?

If your vehicle has ANC microphones, it is recommended to disable them to prevent unwanted noise when adding subwoofers. Refer to vehicle-specific guides for disabling ANC.

What tools are needed for installation?

You will need a crimping tool and connectors (or soldering iron, solder, and heat shrink), wire cutters, zip-ties, and optionally a multimeter for testing.

Why is there no sound after installation?

Check all connections: ensure the RCA cables are firmly plugged, the gain controller is connected, the remote wire has 12V, and the amplifier is powered. Also verify the factory radio is on and the LOC is receiving signal.

Where can I get technical support?

Contact Metra's tech support at 386-357-1187 or email [e-mail]. Hours: Mon-Fri 9AM-7PM, Sat 10AM-7PM, Sun 10AM-4PM EST.

USER MANUAL AXLOC-CH3 Axxess

Collection of various electronic components including connectors, cables, and a speaker (no visible text or symbols)

Chrysler LOC (Line Output Converter)

AXLOC-CH3 (for Non-Amplified Vehicles) 2011-2020

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle specific applications

• Designed to provide (2) channels of low-level audio output from the factory system.
• Allows for the installation of an amplifier for speakers or subwoofers.
• Gain Controller included to adjust the overall output.
• 12v-500mA remote wire activated with signal sense.
• 55-watts per channel.
• Designed for non-amplified vehicles.

Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.

APPLICATIONS

Chrysler

300/300C 2011-2014

Dodge

Charger 2011-2014

Journey 2011-2020

For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the Vehicle Fit Guide for Radio Install Kits.

TABLE OF CONTENTS

Applications....1

Installation 2

Diagram 3

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape - Wire cutter - Zip-ties

KIT COMPONENTS

• AXLOC-CH3 Wiring Harness
• Gain Controller
• 12v-500mA Remote Wire
  • Auxiliary Cable

ATTENTION: With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections, especially the air bag indicator lights, are plugged in before reconnecting the battery or cycling the ignition to test this product.

NOTE: Refer also to the instructions included with the aftermarket accessory before installing this device.

INSTALLATION

1. Disconnect the harness from the factory tuner and install the AXLOC-CH3 harness provided with this kit.
2. Mount the gain controller in a suitable location, and connect the auxiliary cable to the BASS KNOB, then to the Gain Connector of the AXLOC harness.

3. Install the aftermarket amplifier and run an RCA pair (sold separately) to the line converter.

4. Connect the remote wire, plug in the device and secure all connections prior to testing.

NOTE: If the vehicle is equipped with active noise cancellation microphones (ANC), it is recommended that they are disabled to prevent potential noise when installing subwoofers.

DIAGRAM

AXLOC-CH3 INSTALLATION INSTRUCTIONS

Having difficulties? We're here to help.

Contact our Tech Support line at: 386-357-1187

Or via email at: [e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

Collection of various electronic connectors and components, including a black rectangular device with internal wiring and external connectors (no visible text or symbols)