Argon AR07 - Refroidisseur pour ordinateur SILVERSTONE - Free user manual and instructions

USER MANUAL Argon AR07 SILVERSTONE

Designing Inspiration

ARGON SERIES

Great balance of silence and performance

Unique interweaving diamond edged fins for improved performance

Exclusive arrow guides distribute airflow evenly among heat pipes

Three heat-pipes and aluminum fins for excellent heat conducting efficiency

Heat-pipe direct contact (HDC) technology

Includes compact PWM fan for excellent cooling and low noise

Anti-vibration rubber pads included for additional noise dampening

Intel Socket LGA775/115X/1366/2011 and AMD Socket AM2/AM3/FM1/FM2 compatible

Advanced heatsink with Heat-pipe Direct Contact (HDC) technology

Installation and system optimization guide:

The following manual and guides were carefully prepared by the SilverStone engineering team to help you maximize the potential of your SilverStone product. Please keep this manual for future reference when upgrading or performing maintenance on your system. A copy of this manual can also be downloaded from our website at:

● Introduction P.1
- Specifications P.1
● Installation Guide P.2
● Fan Installation Guide P.9

Warranty

Introduction

The Argon series coolers are designed to provide the best cooling solution for your CPU. Featuring three thick copper heat pipes connected to the base using heat-pipe direct contact (HDC) technology, this cooler retains the signature Argon series feature. To improve performance even further, unique and exclusive heatsink fin designs such as interweaving diamond edge and arrow guides are included. Coupled with an all-new PWM fan with exceptional airflow to noise ratio, the AR07/AR08 can quickly and quietly push away excessive CPU heat while also cooling down surrounding motherboard components for effective overall thermal dissipation. For users looking for a no-nonsense top performing cooler without the premium price, the Argon AR07/AR08 is the perfect choice.

Specifications

Model No.	SST-AR07, SST-AR08
Material	Copper heat pipes with aluminum fins
Application	Intel Socket LGA775/115X/1366/2011/2011-V3AMD Socket AM2/AM3/FM1/FM2
Heat Pipe Type	8mm heat-pipe x 3 (AR07) 6mm heat-pipe x 3 (AR08)
Cooling System	140mm x 140mm x 25mm fan (AR07)92mm x 92mm x 25mm fan (AR08)
Noise	16.5 ~ 30.8dBA (AR07)14.1-27.7dBA (AR08)
Bearing	Long life sleeve
Net Weight	453g (without fan) (AR07)285g (without fan) (AR08)
Voltage Rating (V)	12V
Start Voltage (V)	≤ 6V (AR07) ≤ 4.7V (AR08)
Air Flow (CFM)	31.4 ~ 93.0CFM (AR07)26.8~49.5CFM (AR08)
Speed (R.P.M.)	800 ~ 1500RPM (AR07)1500~2800RPM (AR08)
Life Expectance (hrs)	40,000 hours
Dimension	140mm (W) x 50mm (D) x 159mm (H) (without Fan) (AR07)92mm (W) x 50mm (D) x 134mm (H) (without Fan) (AR08)

Installation Guide

Before you begin, please make sure that you

1 have all components collected
② check that all components do not have compatibility problems with each other or with the case
3 if possible, assemble the components outside the case first to make sure they are working
④ keep the motherboard manual ready for reference during installation
5 prepare a Phillips screwdriver.

01

AM2/AM3/FM1/FM2 LGA115X LGA775 LGA1366 LGA1366 LGA115X LGA775 LGA775 LGA115X LGA1366 LGA1366 LGA775 LGA115X

ENGLISH

Confirm the motherboard socket type before installation

DEUTSCH

Isometric technical diagram of a mechanical assembly with mounting holes and a central square component (no text or symbols)

ENGLISH

Place the rubber cushion according to the socket type onto the motherboard

РУССКИЙ

Isometric technical diagram of a microchip assembly with four cylindrical components mounted on a diamond base (no text or labels)

ENGLISH

Install the knurled threaded screws through the rubber cushion and fasten the screws on the motherboard

РУССКИЙ

Isometric technical diagram of a microchip with a black component inserted, no visible text or symbols

ENGLISH

Please clean the surface of CPU then apply thermal grease evenly on CPU

РУССКИЙ

Diagram showing a mechanical assembly with a downward arrow indicating process (no text or symbols present)

ENGLISH

Use screws to secure bracket onto the heatsink

РУССКИЙ

Technical illustration of a heat exchanger cooling system with cooling fins and cooling tower (no text or symbols)

ENGLISH

Remove the film from the cooler base and place it on the CPU

РУССКИЙ

Technical line drawing of a heat exchanger or cooling unit with cooling fins and cooling tower (no text or symbols)

ENGLISH

Install the T-nuts onto the mounting-clip

РУССКИЙ

Before you begin, please make sure that you

1 have all components collected
② check that all components do not have compatibility problems with each other or with the case
3 if possible, assemble the components outside the case first to make sure they are working
④ keep the motherboard manual ready for reference during installation
5 prepare a Phillips screwdriver.

01

Isometric technical illustration of a heat exchanger or cooling unit with cooling fins and heat sinks, showing internal structure and directional arrow (no text or symbols)

AR07

ENGLISH

Secure the anti-vibration rubber mounting into the heatsink's fins

DEUTSCH

Technical diagram of a heat exchanger or cooling unit with heat dissipation and cooling fins, shown with arrows indicating direction (no text or symbols present)

AR08

Technical illustration of a heat exchanger or cooling unit with cooling fins and cooling tower, showing internal components and airflow direction (no text or symbols)

ENGLISH

Place the metal wire clips into the groove on the heatsink fins

РУССКИЙ

AR07 AR08

ENGLISH

Latch the metal wire clips' four hooks onto the fan's mounting holes

РУССКИЙ

This product has a limited 1 year warranty in North America and Australia.

For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty.

Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology's jurisdiction.

a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.

b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc...)

c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.

d) Warranty mark/stickers are not removed or broken.

Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

1. Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

2. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

3. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser.

4. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

5. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com.

Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization ("RMA") number from SilverStone. Updated warranty information will be posted on SilverStone's official website. Please visit http://www.silverstonetek.com for the latest updates.

Additional info & contacts

For North America ([e-mail])

SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.

Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of purchase if it is within 30 days of purchase.

after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the "USA RMA form for end-users" form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only ([e-mail])

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Please refer to above "Warranty terms & conditions" for further warranty details.

SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238

(standard international call charges apply)

For Europe ([e-mail])

For all other regions ([e-mail])

SilverStone Technology Co., Ltd.

www.silverstonetek.com

[e-mail]

NO: G11225210