IAHI24X23G3C - Washing machine IFB - Free user manual and instructions

USER MANUAL IAHI24X23G3C IFB

Front view of a white air conditioner unit with 'IFB' branding and 'ECO INVERTER' logo, no visible text or symbols beyond branding.

USER MANUAL

Read instructions before switching on the air conditioner.

Observe safety guidelines for installation.

Warranty—customer copy

Model

Serial No ____

Dealer's name

Date of purchase

Customer's name

Address ____

Phone ____

Email ____

TRUSTED BY OVER 7 MILLION SATISFIED CUSTOMERS

Microwave Oven Built-in-Oven Dishwasher Chimney I Built-in-Hob Top Load Front Load 100% Clothes Dryer Air Conditioner

Black and white barcode image with vertical lines and a small number 'n' in the bottom right corner.

IU221OTUSM012

For Internal use only

REV:D

Welcome to the IFB family

India's best fast cooling air conditioner is now at your service. We thank you, hope it serves you well and becomes an integral part of your family!

Cartoon illustration of a smiling battery with arms and legs, waving (no text or symbols)

Diagram illustrating the installation of air conditioner units with numbered components and a window view.

CONTENTS

Safety guidelines for installation 04

Safety guidelines for user 05

Safety rules and prohibitions 06

The A to Z of your air conditioner 08

Auto Restart & Emergency Function 13

Chapter 1: Getting started with your machine

Installing your machine & safety guidelines 22

Modes of operation 23

Chapter 2: Installing your air conditioner

Selecting the location 28

Key information for installer 36

Chapter 3: Maintenance and cleaning

Filter Clean Indicator 40

Replacing the batteries 40

Cleaning the air filters 40

Cleaning the Aesthetics 40

Chapter 4: Useful information

Troubleshooting 43

Installation report 44

Warranty 48

PAGE

Warning Electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with local and national safety regulations. It is important that this basic requirement is present and regularly tested. When there is any doubt, the onsite wiring system should be inspected by a qualified electrician. IFB cannot be held liable for the consequences of an inadequate earthing system (eg electric shock etc).

Precautions This appliance conforms to safety requirements.

Inappropriate use can lead to injury or damage to property.

Please read this user manual carefully. It contains information on safety, installation, use and maintenance.

1 SAFETY GUIDELINES FOR INSTALLATION

Warning symbol: a triangle with an exclamation mark (no text or numbers present)

- Keep the packaging material. It may come in handy when shifting residence.

- Read this guide before installing and using the appliance.

- During the installation of the indoor and outdoor units, access to the work area should be forbidden to children. Unforeseeable accidents could occur.

- Do not install and use a damaged machine. Before connecting the machine, ensure that the connection data on the data plate (fusing, voltage and frequency) match the main electricity Supply. If any doubt, consult IFB Care.

- Make sure that the base of the outdoor unit is firmly fixed.

- Check that air does not enter the refrigerant system and check for refrigerant leaks when moving the air conditioner.

- Carry out a test cycle after installing the air conditioner and record the operating data.

• The ratings of the fuse installed in the built in-control unit are T 5A/250 V.

- The user must protect the indoor unit with a fuse of suitable capacity for the maximum input current or with another overload protection device.

- Ensure that the mains voltage corresponds to that stamped on the rating plate. Keep the switch and power plug clean. Insert the power plug properly into the socket, thereby avoiding the risk of electric shock or fire due to improper contact.

- Check that the socket is suitable for the plug: otherwise have a suitable socket installed.

- Do not install the air conditioner at a distance of less than 50cm from inflammable substances (alcohol etc) or from pressurized containers (eg. spray cans).

- If the air conditioner is used in areas without the possibility of ventilation, precautions must be taken to prevent any leakage of refrigerant gas from air conditioner in the environment and creating a danger of fire.

- The packaging materials are recyclable and should be disposed off in separate waste bins. Take the air conditioner at the end of its useful life to a special waste collection centre for disposal.

- Only use the air conditioner as instructed in this user manual. These instructions are not intended to cover every possible condition and situation. As with any electrical household appliance, common sense and caution are therefore always recommended for installation, operation and maintenance.

- Before accessing the terminals, all the power circuits must be disconnected from the power supply.

- The air conditioner must be installed in acc ord anc e with n ati ona l wi ring regulations.

- All air conditioner installation work must be carried out only by IFB authorized service personnel.

2 SAFETY GUIDELINES FOR USER

Warning symbol: white exclamation mark inside a triangle (no text or numbers)

• Do not try to install the air conditioner alone; always contact IFB authorized service personnel.
• Cleaning and maintenance of the air conditioner must be carried out only by IFB authorized service personnel. The air conditioner must be disconnected from the electricity supply mains before carrying out any cleaning or maintenance.
• Ensure that the mains voltage corresponds to that stamped on the rating plate. Keep the switch and power plug clean. Insert the power plug properly into the socket, thereby avoiding the risk of electric shock or fire due to improper contact.
• Do not switch OFF the air conditioner by pulling out the power plug when it is in operation, as this could create a spark and cause fire etc.
• This appliance has been made for air conditioning domestic environments and must not be used for any other purpose, such as for drying clothes, cooling food etc.
  • Always use the appliance with the air filter mounted. The use of the air conditioner without the air filter can cause an excessive accumulation of dust or waste on the inner parts of the appliance with the possible risk of subsequent failure.
• The owner/user is responsible for having the appliance installed by IFB authorized service personnel who must check that it is earthed in accordance with current legislation and insert a thermo magnetic circuit breaker.

• The batteries of the remote control must be recycled or disposed of properly. Please discard the batteries as sorted municipal waste at the accessible collection point.

• Never remain directly exposed to the flow of cold air for all long time. The direct and prolonged exposure to cold air could be dangerous for your health. Particular care should be taken in rooms with children, elderly or sick people.

• If the air conditioner emits smoke or there is a smell of burning, immediately cut OFF the power supply and contact IFB care. Prolonged use of the device in such conditions can cause fire or electrocution.
• Unauthorized repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept responsibility. Only IFB authorized service personnel should undertake repairs.
• The airflow flaps must be directed downwards in the Heat Mode and upwards in the Cooling Mode.
• Only use the air conditioner as instructed in this user manual. These instructions are not intended to cover every possible condition and situation. As with any electrical household appliance, common sense and caution are therefore always recommended for installation, operation and maintenance.
• Ensure that the appliance is disconnected from the power supply when it will remain inoperative for a long period and before carrying out any cleaning or maintenance.
• Ensure that the air conditioner is connected to a 3-pin power socket with good earthing and MCB (as prescribed by the IFB authorized service technician) or other automatic short circuit protection device.
  • To relocate and reinstall the air conditioner, Please contact IFB care.

3 SAFETY RULES AND PROHIBITIONS

Warning symbol: white exclamation mark inside a triangle (no text or numbers)

- Do not bend, tug or compress the power cord since this could damage it. Electrical shocks or fire are most often caused by a damaged power cord. Only IFB authorized service personnel must replace a damaged power cord.

• Do not use extensions or gang modules.

- Do not touch the appliance when barefoot or when parts of your body are wet or damp.

- Do not obstruct the air inlet or outlet of the indoor or the outdoor unit. The obstruction of these openings causes a reduction in the operative efficiency of the air conditioner with possible consequent failures or damages.

• In no way alter the characteristics of the air conditioner.

- Do not install the air conditioner near . sources of heat or in an environment where the air contains gas, oil or Sulphur.

- Do not operate the air conditioner where inflammable substances such as oil, benzene or highly inflammable gas are present. Such materials may cause fire or explosions.

- This air conditioner can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning the use of the appliance in a safe way and understand the hazards involved.

- Do not leave windows or doors open f long when the air conditioner is operating.

- Do not direct the airflow onto plants of animals. Prolonged direct exposure to cold air can have negative effects on them.

- Do not bring the air conditioner in contact with water. The electrical insulation may be damaged, thus causing electrocution.

Do not climb onto or place any objects on the indoor or outdoor units.

• Never insert any object inside the a conditioner. It can cause injury.

• Children should not play with the conditioner. Cleaning and user maintenance should not be performed by children without supervision.

The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with local and national regulations. It is most important that a qualified electrician regularly tests this basic safety requirement. The manuf act urer cannot be held responsible for the consequences of an inadequate earthing system.

About eWaste

eWaste or Electronic Waste or Waste Electrical and Electronic Equipment (WEEE) are the terms used to describe old, end-of-life or discarded appliances using electricity.

Dos and Don'ts for Customers

Dos

• Always dispose of products that have reached end-of-life by calling an authorized local eWaste recycler.
• Always drop off used electronic products, batteries or accessories at your nearest authorized eWaste recycler when they reach end-of-life.
- Whenever possible, or as instructed, sort packaging materials according to responsible waste disposal and recycling options.

Don'ts

• Do not dismantle electronic products or your own.
- Do not throw electronic products in bins with a 'Do Not Dispose' sign.
- Do not give eWaste to informal and unorganized sectors such as local scrap dealers and rag pickers.
- Do not dispose off your product in garbage bins along with municipal waste that ultimately reaches landfills.

Risks of Improper Handling

of eWaste

eWaste usually includes components which, if disposed of improperly, hold environmental consequences such as air, water and soil pollution and also pose risks to human health. By ensuring this product is disposed off correctly, you will help to

prevent potential negative consequences for the environment and human health. Components and materials used in the manufacture of this AC shall be disposed off responsibly.

This product is RoHS compliant

For detailed Information and Disposal Request

Contact IFB Care at

080 458 45678/ 080 695 45678 and provide your details to our representative to

Request your product to be picked up for disposal.

The A to Z of your air conditioner

INDOOR UNIT

01 FRONT PANEL
02 AIR FILTER
03 SPECIAL FILTER
04 LED DISPLAY
05 TERMINAL BLOCK COVER
06 HORIZONTAL DEFLECTORS
07 VERTICAL DEFLECTORS
08 EMERGENCY BUTTON
09 INDOOR UNIT RATING LABEL
10 ENERGY LABEL
11 24 DEGREE TEMPERATURE LABEL
12 REMOTE CONTROL

24° 1978 12

Technical diagram of an air conditioner with numbered parts for identification

8.8 1 2 3 4 5

INDOOR UNIT DISPLAY

1 POWER

2 SLEEP

3 TEMPERATURE DISPLAY/TIME DISPLAY

4 TIMER

5 RUN

Note:

The shape and position of indicators may vary according to the model, and may not correspond to the appearance of the units that have been purchased but their function remain same.

Exterior view of an industrial air conditioner unit (IFB) mounted on a wall, with mountainous landscape in the background (no signage or text visible)

The A to Z of your air conditioner

OUTDOOR UNIT

01 AIR OUTLET GRILLE
02 OUTDOOR UNIT RATING LABEL
03 BIG HANDLE COVER
04 GAS VALVE
05 LIQUID VALVE
06 BRAND LOGO

06 BRAND LOGO 1 2 3 4 5 6

Black-and-white interior view of a modern bedroom featuring a white bed, a high-temperature air conditioner unit, and decorative wall art (no visible text or symbols)

Auto Restart & Emergency Function

Cross-sectional diagram of a car air conditioner unit showing internal components and ventilation slots (no text or labels)

Auto Restart\*

This function allows the air conditioner to keep the selected settings after a blackout or a voltage drop.

How to deactivate Auto Restart

• Switch the air conditioner OFF and unplug it from the power socket.
• Press the emergency button while re plugging the air conditioner into the wall socket.
• Keep the emergency button pressed for 10 seconds at least, until you hear four short beeps from the indoor unit.

How to activate Auto Restart

- Follow the same procedure for activation until you hear three short beeps from the indoor unit.

Emergency Function

In case you misplace the remote control for the indoor unit, proceed as follows

• Lift the front panel of the indoor unit to reach the emergency button.
• If you press the button once (one beep), the air conditioner will work in Forced Cool Mode.
  • To Switch off the Unit press the emergency key again.

Clock Setting for Remote Control - 1

• To set the clock time, insert the batteries. Clock time will be initially shown as "00:00" and it will be blinking at the top left corner of the remote screen.
• Using + and - keys, user can set the right time. After setting the clock time, Press the power button, and the clock time will stop blinking.
• Later, If user want to change time, user can remove the batteries and repeat the same process.
• Note: User can set clock time in 24 hrs format only.

Remote Control - 1

02:35 PM 5 1 4 3 2 24°C FAN SPEED MODE FAN + 6 TIMER SUPER/- 8 9 10 HEALTH FLEXI SWING 11 SLEEP/ 12 13 14 15 16 SWING POWER IFB

1 COOL MODE
Allows to cool the room, also reducing the humidity in the air.
2 HEAT MODE
Allows the air conditioner to produce hot air.
3 FAN MODE
The air conditioner works using only the fan.
4 DRY MODE
Reduces the humidity of the air to make the room more comfortable
5 AUTO MODE
The air conditioner will automatically choose the temperature settings and fan speed
6 FAN
Selects the fan speed - auto/low/mid/high
7 + TEMPERATURE UP
Increases the temperature or time by 1 unit
8 TIMER ON/OFF
Switches the air conditioner ON/OFF
9 SUPER--> ECO
One press activates the Super Mode and Second press activates the Eco mode
10 — TEMPERATURE DOWN
Decreases the temperature by 1 unit
11 HEALTH
Switches ON/OFF the HEALTH function, controls the ANTI MILDEW Mode.
12 FLEXI
Selects flexible cooling capacity steps
13 SWING
Activates and deactivates swinging of horizontal and vertical deflectors
14 SLEEP
Activates the SLEEP function and Display
15 AMB
Displays Ambient temperature and activates I-FEEL function.
16 POWER
Switches the air conditioner ON/OFF

Meanings of Symbols - 1

1		AUTO/FEEL MODE
2		COOL MODE
3		DRY MODE
4		FAN MODE
5		HEAT MODE*
6		SIGNAL RECEPTION
7		TIMER ON
8		TIMER OFF
9	All 5 fans indicatorsgradually blink	AUTO FAN
10		LOW FAN SPEED
11		MIDDLE FAN SPEED
12		HIGH FAN SPEED
13		SLEEP MODE
14		FLAP SWING*
15		SUPER
16		ECO
17	AMB	AMBIENT TEMPERATURE*
18		HEALTH*
19		ANTI-MILDEW
20		BATTERY INDICATOR
21	02:35	CLOCK TIME
22	C1,C2,C3,C4,C5	FLEXI STEPS*
23		DISPLAY FUNCTION
24		IFEEL*

*This feature is only available in select remote controls/models.

Note The aesthetics and functions of the remote control may vary according to the model. The shape and position of the buttons and indicators may also vary but will have the same functions. The indoor unit confirms the reception of every input with a beep.

02:35 PM 24°C FAN SPEED MODE FAN + TIMER SUPER/- HEALTH FLEXI SWING SLEEP/ AMB ! SWING POWER IFB

Remote Control

02:35 PM 24°C FAN SPEED MODE FAN + TIMER SUPER/- HEALTH FLEXI SWING SLEEP/- AMB SWING POWER IFB

1. Mode: Cool

"The Cool Mode allows the air conditioner to cool the room while also reducing the humidity in the air.

• To activate the Cool Mode, press the Mode button until the symbol appears on the display.
• The cooling is activated by using the + and - buttons to set a temperature lower than that of the room.
  • To optimize the functioning of the air conditioner, adjust the temperature, speed and direction of airflow by pressing buttons available on remote.
• As per national regulation the default temperature of 24C is set each time once switches ON the Ac through remote.

Note All rating values in the BEE label are measured at Super/Turbo speeds with the vertical deflectors in the straight position and the horizontal flaps in the open position."

2. Mode: Heat

"The Heat Mode allows the air conditioner to produce hot air.

• To activate the Heat Mode, press the Mode button until the symbol ✪ appears on the display.
• The heating is activated by using the + and - buttons to set a temperature higher than that of the room.
  • To optimize the functioning of the air conditioner, adjust the temperature, speed and direction of airflow by pressing the buttons shown in the figure.
• The air conditioner is fitted with a Hot Start function that delays the starting of the air conditioner for a few seconds to avoid an immediate outflow of hot air.

Note In the Heat Mode, the air conditioner can automatically activate a defrost cycle to remove any frost from the condenser. This usually lasts 2-10 minutes. During defrosting, the fans stop turning.

After defrosting is complete, the air conditioner automatically returns to the Heat Mode."

3. Mode: Fan

"In the Fan Mode, the air conditioner works using only the fan.

• To activate the Fan Mode, press the Mode button until ✉ appears on the display.
• Press the Fan button to change the fan speed as follows: Low, Medium, High. The fan speed set will be stored in memory."

4. Mode: Dry

"The Dry Mode reduces the humidity of the air to make the room more comfortable.

• To activate the Dry Mode, press the mode button until 🔒 appears on the display In this mode, the fan works at low speed by default and cannot be adjusted.

Note In the Dry Mode, the air conditioner sets automatically alternating cooling cycles and activates the fan. (Actual room temperature and display temperature may differ during the operation.)*

5. Mode: Auto

"In the Auto Mode, the air conditioner will automatically choose the temperature settings and fan speed.

• To activate the Auto Mode, press the Mode button until 🔒 appears on the display.
• In the Auto Mode, the fan speed and temperature are set automatically according to the room temperature for optimal user comfort.

Note The temperature of the room will be determined by a probe integrated into the indoor unit."

6. Mode: Timer

"Time Mode - Timer ON : Before setting the

Start Time, choose the mode and fan speed while the air conditioner is ON.

• Switch OFF the air conditioner.
• Press the Timer button. Set the Start Time by using the + and - buttons. The time till the air conditioner switches ON should be displayed. Then press the Timer button again.
• To cancel the set Start Time, press the Timer button again.

Note In case of a power outage, it is necessary to set the Start Time again. *

7. Mode: Timer

"Timer Mode - Timer OFF : To program the air conditioner to automatically switch OFF, press the Timer button. Set the Stop Time by using the + and - buttons. The time till the air conditioner switches OFF should be displayed.
- To cancel the set Stop Time, press the TIMER button again.

Note In case of a power outage, it is necessary to set the Stop Time again."

8. Mode: Super

"If the Super button is pressed in the Cool Mode, the air conditioner will be set to the lowest temperature of 16°C.

- If the Super button is pressed in the Heat Mode, the air conditioner will be set to the highest temperature of 31 °C."

9. Mode: Eco

"To activate the Eco Mode, simply press the super button twice.

• In the Cool Mode, the temperature will gradually rise to 27^ and the compressor frequency will gradually decrease.
• In the Heat Mode, the highest temperature will be 25°C. The air conditioner will keep the same temperature when the temperature set is lower than 25°C.

Note Cooling is optimized in Eco mode to save electricity.

10. Mode: Health

"To activate this mode, press the Health button.

- When this feature is activated, AC will start its air purification function.

Note Applicable for selected models only."

11. Mode: Anti Mildew

"The Anti Mildew Mode is used for drying the indoor cooling unit.

• To activate the Anti Mildew Mode, hold the Health button for 3 seconds.
- The indoor blower works for some time and Indoor unit display will show ‘--’ after the AC is switched off to dry the indoor unit. the unit will switch off thereafter.
- If Power ON/OFF button is pressed during the operation, the Anti Mildew will be cancelled."

12. Mode: Flexi

"This feature is used to select flexible capacity as per customer selection.

- When this key is pressed, C1, C2, C3, C4, C5 is displayed on remote and respective capacity is displayed on IDU as per below table.

Note This feature is available in cool mode only."

Model Name	1st Press	2nd Press	3rd Press	4th Press	5th Press
	C1	C2	C3	C4	C5
CI12/CI13/HI13	0.9	0.8	0.7	0.6	0.5
CI15	0.9	0.8	0.7	0.6	1.2
	1.0	0.9	0.8 0.7	0.6
CI18/CI19/HI18	1.3	1.2	1.0 0.8	0.6
CI20	1.2	1.0	0.8 0.6	1.7
CI24/HI24	1.7	1.5	1.2 1.0	0.8
CI26	1.8	1.7	1.5	1.2	1.0
CI28	2.0	1.8	1.5	1.2	1.0

Note: In select models, under test conditions.

13. Mode: Sleep

"The Sleep Mode automatically adjusts the temperature of the room to make it more comfortable.

• To activate the Sleep Mode, press the Sleep button once.
- In the Cool, the set temperature will automatically rise by 1°C every 60 minutes, to achieve a rise of 2°C during the first 2 hours of operation. In the Heat Mode, the set temperature will automatically decrease by 2°C during the first 2 hours operation.

Note After 10 hours of operating in the Sleep Mode, the air conditioner will automatically switch OFF."

14. Mode: Display

Display function allow a user to ON/OFF display.

• To activate the Display function, Press and hold sleep button for 3 seconds.

15. Mode: Ambient

To check this ambient temperature press Amb key. Outdoor temperature will be displayed on Indoor unit display for 5 seconds.

Note This feature is not available in Fan Mode.

16. Mode: I-Feel

"To activate the IFEEL Mode, press the Amb button for 3 sec and IFEEL symbol will be visible on the display.

- When this feature is activated, AC start taking room temperature values from remote which have inbuilt temperature sensor.

Note This feature is available in cool mode only.

24°C OFF TIME TIME MODE FAN + TIMER SUPERIOR HEALTH FLEXI SWING SLEEP/30 AMG 8 SWING POWER TFB

Remote Control - 2

3 Timer 5 Super 10 Flexi 12 Fan 4 8.8°C On Off Cool Dry Fan Heat Eco/ 7 Sleep/ 6 Swing 8 Swing 11 Mode 9 1 2 ITB

1. • TEMPERATURE UP

Increases the temperature or time by 1 unit

1. • TEMPERATURE DOWN

Decreases the temperature or time by 1 unit

1. ON/OFF

Switches the air conditioner ON/OFF

1. FAN

Selects the fan speed - auto/low/mid/high

1. TIMER

Sets the air conditioner to automatically switch ON/OFF

1. SLEEP

One press activates the SLEEP function

DISPLAY - Hold sleep button for 3 sec. to activate the function

1. ECO

One press activates the ECO Mode

ANTI-MILDEW*

Hold Eco button for 3 sec to activate the ANTI MILDEW Mode

1. MODE

Selects the mode operation

1. SUPER*

In Cool Mode, pressing this button, will set the minimum cooling temperature of 16^ C; in * Heat Mode, pressing this button will set the maximum heating temperature of 31^ C

8/11. SWING

Activates and deactivates swinging of horizontal/Verticle deflectors

1. FLEXI

Selects flexible cooling capacity steps

1. AMB TEMP*

Displays Ambient temperature

*This feature is only available in selected remote controls/models.

Meanings of Symbols - 2

1	Feel	FEEL/AUTO MODE
2	Cool	COOLING
3	Dry	DEHUMIDIFYING
4	Fan	FAN ONLY OPERATION
5	Heat*	HEATING
6		SIGNAL RECEPTION
7	OFFTIMER	TIMER OFF
8	ONTIMER	TIMER ON
9	All 3 fan indicators gradually blink	AUTO FAN
10	Fan ■	LOW FAN SPEED
11	Fan ■	MIDDLE FAN SPEED
12	Fan ■	HIGH FAN SPEED
13	Sleep ■	SLEEP
14	& *	FLAP SWING
15	Super ■	SUPER
16	Amb* ■	AMBIENT TEMPERATURE
17	Eco/■ ■	ECO
18	Eco/■ ■	ANTI-MILDEW
19	Flexi* ■	C1,C2,C3,C4,C5

* This feature is only available in selected remote controls/models.

Note The aesthetics and functions of the remote control may vary according to the model. The shape and position of the buttons and indicators may also vary but will have the same functions. The indoor unit confirms the reception of every input with a beep.

Timer 8 18 On off Super 7 6 Eco/ 17 15 1 Sleep/ 13 Flexi 2 Cool 3 Dry 4 Fan 5 9 10 11 12 Swing 14 Hea Swing 14

Mode + - - USB

1 Getting started with your machine ON 12

Installing your machine & safety guidelines

Inserting batteries in the remote control

• Remove the cover of the remote control's battery compartment by sliding it in the direction of the arrow.
• Insert the new batteries, ensuring that the (+) and (-) directions are correct.
  • Refit the cover by sliding it into place.

Note Use two AAA (1.5 V) batteries. Do not use rechargeable batteries. Replace the batteries with new ones when the LED display is no longer legible.

The remote control's batteries must be disposed off in accordance with the applicable laws in force in the country of use.

When you insert the batteries for the first time in the remote control or if you change them, you need to program the remote control of only cooling or heat pump air conditioners. This is very easy. As soon as you insert the batteries, COOL and HEAT start flashing. If you push any button when COOL is displayed, the remote control is calibrated for the Cool Mode. If you push any button when HEAT is displayed, the remote control is calibrated for the Heat Mode.

Note After adjusting the function, you need to remove the batteries and repeat the procedure. If you calibrate the remote control for Cool Mode, it will not be possible to activate the heating function (in units with heating pumps). You will need to take out the batteries and repeat the procedure described above.

Gray background with a diagonal striped corner and the number '1' in the bottom right corner (no text or symbols beyond the numeral)

Filter Heat Exchanger Fan

Timer Super Flexi Fan 24°C Cool Eco/$ Sleep/$ Swing Swing Swing

Guidelines for using the remote control

• Direct the remote control towards the air conditioner.
• Check that there are no objects between the remote control and the infrared receiver of the air conditioner.
• Never leave the remote control exposed to direct sunlight.
• Keep the remote control at a distance of at least 1 m from televisions and other electrical appliances.

Modes of operation

The air conditioner is designed to create comfortable conditions by cooling and dehumidifying the air in the room. If required, it can also heat the air (in models with heat pump).

• The air drawn in by the fan enters through the grille of the front panel and passes through the air filter, which removes the dust.
• It is then conveyed to the heat exchanger and cooled and dehumidified (or heated). The heat removed from the room's air is emitted outdoors.
• The direction of the airflow is regulated by the deflectors, which are motorized up & down and right & left using the deflectors.

1 Controlling the air flow swing

- The airflow is uniformly distributed around the room. But it is possible to position the direction of the air in a particular position.

1

Timer Super Flexi Fan 24°C Cool Eco® Sleep® Swing® Swing® Mode

Timer Super Floxi Fan 24°C Cool Eco® Sleep® Swing® Swing® Mode

• Press the Swing button to activate the flaps. This alternates the airflow from up to down.
• In order to guarantee an even distribution of air, orient the flaps upward in the Cool Mode and downwards in the Heat Mode.
• The vertical deflectors are under the flaps and adjusted motorized*. They allow the airflow to be directed right or left.

2 Cool Mode

• The Cool Mode allows the air conditioner to cool the room while also reducing the humidity in the air.
  • To activate the Cool Mode, press the Mode button until the symbol COOL appears on the display.

• The cooling is activated by using the + and - buttons to set a temperature lower than that of the room.

• To optimize the functioning of the air conditioner, adjust the temperature, speed and direction of airflow by pressing the buttons shown in the figure.

• As per national regulation the default temperature of 24 C is set each time once switches ON the Ac through remote.

Note All rating values in the BEE label are measured at Super/Turbo speeds with the vertical deflectors in the straight position and the horizontal flaps in the open position.

3 Heat Mode \* In heat pump models only

• The Heat Mode allows the air conditioner to produce hot air.
  • To activate the Heat Mode, press the Mode button until the symbol HEAT appears on the display.
• The heating is activated by using the + and - buttons to set a temperature higher than that of the room.
• To optimize the functioning of the air conditioner, adjust the temperature, speed and direction of airflow by pressing the buttons shown in the figure.

Gray background with a diagonal striped pattern and the number '1' in the corner (no text or symbols beyond the numeral)

Timer Super Flexl Fan 24°C Cool Eco/ Sleep/ Saying + Saying + Made

Timer Super Flexi Fan 24°C Cool Eco# Sleep# Swing# Swing# Mode

Timer Super Flexl Fan 24°C Cool Eco/ Sleep/ Swing Swing Mode

- The air conditioner is fitted with a Hot Start function that delays the starting of the air conditioner for a few seconds to avoid an immediate outflow of hot air.

Note In the Heat Mode, the air conditioner can automatically activate a defrost cycle to remove any frost from the condenser.

This usually lasts 2-10 minutes. During defrosting, the fans stop turning. After defrosting is complete, the air conditioner automatically returns to the Heat Mode.

4 Timer Mode—Timer ON

• Before setting the Start Time, choose the mode and fan speed while the air conditioner is ON.
• Switch OFF the air conditioner.
• Press the Timer button. Set the Start Time by using the + and - buttons. The time till the air conditioner switches ON should be displayed. Then press the Timer button again.
  • To cancel the set Start Time, press the Timer button again.

Note In case of a power outage, it is necessary to set the Start Time again.

5 Timer Mode—Timer OFF

• To program the air conditioner to automatically switch OFF, press the Timer button. Set the Stop Time by using the + and - buttons. The time till the air conditioner switches OFF should be displayed.
• To cancel the set Stop Time, press the TIMER button again.

Note In case of a power outage, it is necessary to set the Stop Time again.

6 Fan Mode

• In the Fan Mode, the air conditioner works using only the fan.
• To activate the Fan Mode, press the Mode button until FAN appears on the display.
• Press the Fan button to change the fan speed as follows: Low, Medium, High. The fan speed set will be stored in memory.

1

24°C Timer Super Flexi Fan Eco$ Sleep$ Swing$ Swing$ MoZ

24°C Timer Super Flexi Fan Mode Eco/0 Sleep/ Swing Swing

Timer Super Flexi Fan 24°C Cool Eco/ Sleep/ Swing Swing Mode

7 Dry Mode

• The Dry Mode reduces the humidity of the air to make the room more comfortable.
• To activate the Dry Mode, press the Mode button until DRY appears on the display. In this mode, the fan works at low speed by default and cannot be adjusted.

Note In the Dry Mode, the air conditioner sets automatically alternating cooling cycles and activates the fan. (Actual room temperature and display temperature may differ during the operation.)

8 Super/Turbo Mode

• If the Super/Turbo button is pressed in the Cool Mode, the air conditioner will be set to the lowest temperature of 16^ C.
• If the Super/Turbo button is pressed in the Heat Mode, the air conditioner will be set to the highest temperature of 31 °C.

9 Feel/Auto Mode

• In the Feel Mode, the air conditioner will automatically choose the temperature settings and fan speed.
• To activate the Feel/Auto Mode, press the Mode button until FEEL appears on the display.

- In the Feel/Auto Mode, the fan speed and temperature are set automatically according to the room temperature for optimal user comfort.

Note The temperature of the room will be determined by a probe integrated into the indoor unit.

10 Ambient Temp

• To check this ambient temperature press this key. Outdoor temperature will be displayed on Indoor unit display for 5 seconds.

Note This feature is not available in Fan Mode.

11 Sleep Mode

• The Sleep Mode automatically adjusts the temperature of the room to make it more comfortable.
• To activate the Sleep Mode, press the Sleep button until SLEEP appears on the display.
• In the Cool or Dry Mode, the set temperature will automatically rise by 1°C every 60 minutes, to achieve a rise of 2°C during the first 2 hours of operation.

Timer Super Flexi Fan 24°C Cool Mode Eco/© Sleep/° Swing° Swing°

- In the Heat Mode, the set temperature will automatically decrease by 2^ C during the first 2 hours operation.

Note After 10 hours of operating in the Sleep Mode, the air conditioner will automatically switch OFF.

12 Eco Mode

• To activate the Eco Mode, simply press the Eco button once.
- In the Cool Mode, the temperature will gradually rise to 27^ C and the compressor frequency will gradually decrease.
- In the Heat Mode, the highest temperature will be 25^ C. The air conditioner will keep the same temperature when the temperature set is lower than 25^ C.

Note Cooling is optimized in Eco mode to save electricity.

13 Anti Mildew Mode \*

• The Anti Mildew Mode is used for drying the indoor cooling unit.
  • To activate the Anti Mildew Mode, hold the Eco button for 3 seconds.

Timer Super Flexi Fan 24°C Cool Eco@ Sleep! Swing Swing Mode

• The indoor blower works for some time and Indoor unit display will show ‘--’ after the AC is switched off to dry the indoor unit. the unit will switch off thereafter.
• If Power ON/OFF button is pressed during the operation, the Anti Mildew will be cancelled.

14 Flexi

• This feature is used to select flexible capacity as per customer selection.
• When this key is pressed, C1, C2, C3, C4, C5 is displayed on remote and respective capacity is displayed on IDU as per below table

Note This feature is available in cool mode only.

Model Name	1st Press	2nd Press	3rd Press	4th Press	5th Press
	C1	C2	C3	C4	C5
CI12/CI13/HI13	0.9	0.8	0.7	0.6	0.5
CI15	0.9	0.8	0.7	0.6	1.2
	1.0	0.9	0.8 0.7	0.6
CI18/CI19/HI18	1.3	1.2	1.0 0.8	0.6
CI20	1.2	1.0	0.8 0.6	1.7
CI24/HI24	1.7	1.5	1.2 1.0	0.8
CI26	1.8	1.7	1.5	1.2	1.0
CI28	2.0	1.8	1.5	1.2	1.0

Note: In select models, under test conditions.

2 Installing your air conditioner

Diagram of a mechanical or electrical assembly with pipes and components, no visible text or symbols

Selecting the location Indoor Unit

Before starting installation, decide on the position of the indoor and outdoor units, taking into account the minimum space required around the units. Install the indoor unit in the room to be air conditioned, avoiding corridors or communal areas.

• Install the indoor unit on a strong wall that is not subject to vibrations.
- The inlet and outlet ports should not be obstructed. The airflow should be able to reach every part of the room.
- Do not install the indoor unit near a source of heat, steam or flammable gas.
• Install the indoor unit near an electric socket or private circuit.
- Do not install the indoor unit where it will be exposed to direct sunlight.

• Install the indoor unit so that it is easily connected to the outdoor unit.
• Install the indoor unit where it is easy to drain the condensed water.
- Check the air conditioner's operation regularly and leave the necessary spaces
• Install the indoor unit where the air filter can be easily accessed.

Note The indoor unit should be installed at a height of at least 2.5 m from the ground.

2

Isometric line drawing of a wall-mounted air conditioner unit mounted on a brick wall, with a vertical pipe inserted (no text or symbols)

Outdoor unit

• The outdoor unit should be installed on a solid wall and fastened securely. Before connecting the pipes and connecting cables, decide which is the best position on the wall and leave enough space to be able to carry out maintenance easily.
• Fasten the support to the wall using screw anchors, which are particularly suited to the type of wall. Use a larger quantity of screw anchors than normally required to avoid vibration during operation and so that they remain fastened for years without becoming loose.

• Do not install the outdoor unit near sources of heat, steam or flammable gas. Do not install the outdoor unit in windy or dusty places.

• Do not install the outdoor unit in places with high human traffic.

• Choose to install the outdoor unit where the air discharge and operating sound will not disturb others.
• Avoid installing the outdoor unit where it will be exposed to direct sunlight. If this in unavoidable, protect it by using shading.
• Leave the spaces for the air to circulate freely.
  • Install the outdoor unit in a safe and stable place.
• If the outdoor unit is subject to vibration, place rubber gaskets on its feet.
• It is recommended to use IFB unique ODU stand which is best suited for IFB Ac's.

Note The unit must be installed following all national regulations.

2

Installation Diagram

Outdoor Unit Pipe Length Max 15 m Indoor unit Height Max 5 m

Indoor Unit Height Max 5 m Pipe Length Max 15 m Outdoor Unit

The purchaser must ensure that this air conditioner is installed by persons qualified and experienced in the installation, service and repair of refrigerant products.

Installation of the mounting plate

• Using a level, place the mounting plate in a perfect square position vertically and horizontally.
• Drill 32 mm deep holes in the wall to fix the plate.
• Insert the plastic anchors into the hole.
  • Fix the mounting plate by using the tapping screws provided.
• Check that the mounting plate is correctly fixed.

Note The shape of the mounting plate may be different from the one above, but the installation method is similar.

Drilling a hole in the wall for the piping

• Decide where to drill the hole in the wall for the piping (if necessary) according to the position of the mounting plate.
• The hole must slope downwards towards the exterior.

Note Slant the drain pipe downwards in the direction of the hole; otherwise leakage may occur.

Electrical connections

• Lift the front panel.
  • Take off the cover as indicated in the figure (by removing a screw).
• For the electrical connections, see the circuit diagram on the right side of the unit under the front panel.
• Connect the cable wires to the screw terminals by following the numbering. Use wire size suitable to the electric power input (see name plate on the unit) and according to all current national safety code requirements.
• The cable connecting the outdoor and indoor units must be suitable for outdoor use.

2

Indoors 50 Outdoors 5 mm

• The plug must be accessible after the air conditioner has been installed so that it may be pulled out if necessary.
  • The connection must have sufficient earthing.
• If the power cord is damaged, it must be replaced by authorized service personnel only.

Note The cable wires have been connected to the main PCB of the indoor unit by the manufacturer according to the model without terminal block.

Refrigerant piping connection

• The piping can move in 3 directions as indicated by numbers in the figure.
• When the piping is moving in direction 1 or 3, cut a notch along the groove on the side of the indoor unit with a cutter.
• Move the piping in the direction of the wall hole and bind the copper pipes, the drain pipe and the power cables, together with tape with the drain pipe at the bottom, so that water can flow freely.

Connecting the pipes

• Shape the connection pipe
- Do not remove the cap from the pipe until connecting it, to prevent dampness or dirt from entering it.
- If the pipe is bent or pulled too often, it will become stiff. Do not bend the pipe more than three times at one point.
- When extending the rolled pipe, straighten the pipe by unwinding it gently as shown in the figure.

Connections to the indoor unit

• Remove the indoor unit pipe cap. Check that there is no debris inside.
• Insert the flare nut and create a flange at the extreme end of the connection pipe.
• Tighten the connections by using two wrenches working in opposite directions.

Indoor unit condensed water drainage

• Place the drain hose below the piping, taking care not to create siphons.
• The drain hose must slant downwards to aid drainage.

2

Technical diagram of a mechanical assembly with numbered components, likely illustrating a valve or actuator mechanism.

Technical line drawing of a mechanical assembly with no visible text or symbols

Torque Wrench

• Do not bend the drain hose or leave it protruding or twisted and do not put the end of it in water. If an extension is connected to the drain hose, ensure that it is lagged when it passes into the indoor unit.
• If the piping is installed to the right, the pipes, power cable and drain hose must be lagged and secured onto the rear of the unit with a pipe connection.
• Insert the pipe connection into the relative slot.
• Press to join the pipe connection to the base.

Installation of the indoor unit

• After having connected the pipe according to the instructions, install the connection cables.
- Now install the drain pipe. After connection, lag the pipe, cables and drain pipe with the insulating material.
- Arrange the pipes, cables and drain hose well.
- Lag the pipe joints with insulating material, securing it with vinyl tape.

• Run the bound pipe, cables and drain pipe through the wall hole and mount the indoor unit onto the upper part of the mounting plate securely.
• Press and push the lower part of the indoor unit tightly against the mounting plate.

Installation of the outdoor unit

Outdoor unit condensed water drainage (only for heat pump models)

The condensed water and the ice formed in the outdoor unit during heating operation can be drained off through the drain pipe

• Fasten the drain port in the 25 mm hole placed in the part of the outdoor unit.
• Connect the drain port and the drain pipe. Ensure that the water is drained in a suitable place.

2

Two diagrams showing a coiled cable with connectors, one with rotation arrows and the other with directional arrows (no text or symbols)

Electrical connections

• Remove the cover.
• Connect the cable wires to the terminal board using the same numbering as in the indoor unit.
• For the electrical connections, see the wiring diagram on the back of the cover.
• Fasten the cables with a cable clamp.
• The connection must have sufficient earthing.
• Refit the covers.

Connecting the pipes

Screw the flare nuts to the outdoor unit coupling with the same tightening procedures described for the indoor unit. To avoid leakage, pay attention to the following

• Tighten the flare nuts using two wrenches. Pay attention not to damage the pipes.
• If the tightening torque is not sufficient, there will probably be some leakage. With excessive tightening torque there will also be some leakage, as the flange could be damaged.

Note The surest system consists of tightening the connection by using a fixed wrench and a torque wrench. In this case, refer to the table below.

Pipe	Tightening Torque (N x m)	Corresponding Stress (Using a 20 cm Wrench)		Tightening Torque (N x m)
1/4”(∅6.35)	15-20 Wrist Strength	Service Port Nut 7-9
3/8”(∅9.52)	31-35 Wrist Strength	Protection Caps 25-30
1⁄2”(∅12.7)	35-45 Wrist Strength
5/8”(∅15.88)	75-80 Wrist Strength

2

OK Not OK Not OK

Vacuuming

Air and humidity left inside the refrigerant circuit can cause compressor malfunction. After having connected the indoor and outdoor units, remove the air and humidity from the refrigerant Circuit by using a vacuum pump.

Note Only persons or companies qualified and experienced in the installation, service and repair of refrigerant products should be permitted to do so. The purchaser must Ensure that the person and/or company who is to install, service or repair this Air conditioner has qualifications and experience in refrigerant products.

After completing the piping, purge the air from the connected pipe and cooling unit. If this is not done, the discharge pressure will rise abnormally and may damage the refrigerating-cycle unit.

Air purging using a vacuum pump

Remove the valve cap of the valve core.

Connect one end of the charge hose to the vacuum pump and the other end to the service valve with the large diameter pipe side service valve.

Fully open the LO knob of the manifold valve and energize both solenoid valves.

Run the vacuum pump.

Vacuum the AC as recommended.

Close the LO knob of the manifold valve.

Stop the vacuum pump.

Remove the valve cap from the spindle of the service valve.

Turn the spindles of the large and small diameter pipe side service valves fully counter-clockwise until they are securely tightened. Then, retighten them more than 10 degrees using a hexagon wrench key of 4/5 mm.

Disconnect the charge hose from the service valve.

2

Indoor Unit Liquid Valve Suction Valve Service Port Nut Protection Caps

Final stage of installation

• Place wind insulating covering around the joints of the indoor unit and fix it with insulating tape.
• Fix the exceeding part of the signal cable to the piping or to the outdoor unit.
• Fix the piping to the wall (after having coated it with insulating tape) using clamps or insert them into plastic slots.
• Seal the hole in the wall through which the piping is passed so that no air Or water can fill.

Indoor unit test

• Do ON/OFF and fan operate normally?
• Do the various modes operate normally?
• Does the Timer function properly?
• Does each LED function normally?
• Do the flaps for airflow direction operate normally?
  • Is the condensed water drained regularly?

Outdoor unit test

• Is there any abnormal noise or vibration during operation?
  • Could the noise, airflow or condensed water drainage disturb the neighbours?
  • Is there any coolant leakage?

Note The electronic controller starts the compressor three minutes after voltage has reached the system.

Key information for installer

Inverter Type Capacity (Btu/h)	12k 15/18k 22/24k
Liquid pipe diameter	14" (∅ 6.35)		14" " (∅ 6.35) (∅ 6.35)	14
Gas pipe diameter	38" (∅ 9.52)	12" (∅ 12.7)	12" (∅ 12.7)	12" (∅ 12.7)
Length of pipe with standard charge	3 m 3 m	3 m 3 m
Maximum distance between indoor and outdoor unit	15 m 15 m	15 m 15 m
Additional refrigerant charge	20 g/m 20 g/m	20 g/m 20 g/m
Maximum difference in level between indoor and outdoor unit	5 m 5 m	5 m 5 m
Type of refrigerant	R32 R32	R32 R32

Black-and-white landscape photo of a snow-covered mountain range with visible peaks and slopes, no text or symbols present.

2

Outdoor Unit Outdoor Handle Cover Wiring Diagram Front Panel Wiring Diagram

Wiring diagram

The wiring diagram may vary according to model. Please check the wiring diagram under the front panel on the right hand side of the indoor unit as well as the back of the outdoor unit handle cover.

Snow-covered mountain range with visible peaks and a marked number 37 in the lower right corner (no text or symbols on the snow itself)

Cable wire specifications

Model Capacity (Btu/H) 12K 18K 24K		Sectional Area
Power supply cable N	1.5 mm 1.5 mm 1.5^2 mmL 1.5 mm 1.5 mm^2 1.5 mm	1.5 mm 1.5^2 mm 1.5 mm^2 1.5 mm 1.5 mm	1.5 mm
Connection supply N cable	1.5 mm 1.5 mm 1.5^2 mmL 1.5 mm 1.5 mm^2 1.5 mm1 1.5 mm 1.5 mm^2 1.5 mm	1.5 mm 1.5 mm^2 1.5 mm 1.5 mm^2 1.5 mm 1.5 mm	1.5 mm

Note: Wire diameters are as per American wire gauge (AWG) standard.

Cartoon illustration of a smiling rectangular character with arms raised, holding a tablet (no text or symbols)

Type of fuse used on indoor unit controller for 12k, 15k, 18k, 22k, 24k, 24k and 30k is rated 4A, 250 V.

Type of fuse used on inverter outdoor unit controller for 12k is rated 15 A, 250 V. Type of fuse used on inverter outdoor unit controller for 18k, 22k and 24k is rated 20 A, 250 V.

Technical line drawing of an air conditioner unit showing internal panel structure (no text or symbols)

Cross-sectional diagram of an air conditioner unit showing internal panel structure (no text or labels)

Periodic maintenance every 2 weeks is essential for keeping your air conditioner operating efficiently. Before carrying out any maintenance, disconnect the power supply by switching OFF the air conditioner.

Filter Clean Indicator

• When AC is operated for a total of about 200 Hours, the fan icon on IDU display will start blinking and indoor unit will beep thrice.
  • This indicates that it is time to clean the air filters.
  • This blinking and beep sound will automatically stop after 30 minutes or power ON/OFF of AC.

Note: Customers who are regularly cleaning the air filters after two weeks can ignore this indication.

Replacing the Batteries

• Take of the back cover of the remote control. Place the new batteries in the Alignment “+” and “-” symbols.
• Use only new batteries. Remove the batteries from remote control when the air conditioner is not in operation.

The remote control's batteries must be disposed off in accordance with the applicable laws in force in the country of use.

Cleaning the air filters

• Open the front panel following the direction of the arrow.
• Keeping the front panel raised with one hand and take out the air filter with the other hand.
• Clean the filter with water. If the filter is soiled with oil, it can be washed with warm water (not exceeding 45°C).
• Leave to dry in a cool, dry place.
• Keeping the front panel raised with one hand, re-insert air filter with the other hand and close the front panel.
  • The Vitamin C and activated carbon filters (if installed) cannot be washed or regenerated and must be replaced every 6 months.
• Do not wash special filters.
• Fragrance diffusers if used must be replaced in 3 - 4 weeks.

Cleaning the Aesthetics

- Use Damp cloth (with water) only to clean the Aesthetics surface of Indoor unit.

Applicable in selected models only 41

Black-and-white photo of a person cleaning or adjusting a window frame, no visible text or symbols

Troubleshooting

Make sure you have installed the air conditioner in accordance with the installation instructions.

If the air conditioner does not start, check the following probable causes before you contact your service provider.

Problem Possible Cause Solution
Air conditioner does not start	Air conditioner is unplugged	Make sure the air conditioner plug is fixed properly in the power socket.
	Fuse is blown/circuit breaker has tripped	Check the fuse/circuit breaker and replace the fuse or reset the breaker.
	Power outage	Switch OFF the main power supply. Switch it back ON once the power resumes.
cool as it should	Airflow is restricted	Make sure there are no curtains, blinds or furniture blocking the airflow.
	Air filter is dirty	Clean the filter every 2 weeks. (Refer Maintenance and cleaning).
	Room is too hot	After the air conditioner is switched ON, allow time for the room to cool down.
	Cold air is escaping	Check whether any door/window in the room is open. If so, close them to avoid leakage of cold air.
Air conditioner displays error code	Display shown error code such as E1, E2 etc	Contact IFB Care.

Before contacting IFB Care, make sure you have the make, model and serial number of your air conditioner on hand. The IFB Service Centre will require this information.

Installation report

Model ____ Serial No ____

Customer's name

Phone (Residence) ____ (Office) ____

Address

Installation check points

Machine delivered on

Machine installed on

Service engineer to tick appropriately

• Air conditioner checked for damage?
• Tapes removed from the front cover?
- All packaging waste from customer's premises cleared with customer's prior permission?
- Strength of installation of both indoor and outdoor units sufficient?
• Direction of condenser of machine? North/South/East/West
- If condenser is towards South or West, is proper shade provided?
• Installation of indoor unit as per distance guide below?

Top 150 mm Left 150 mm Right 150 mm Bottom 2300 mm

• Installation of outdoor unit as per distance guide below?

Top 500 mm Back 150 mm Right 500 mm Left 300 mm Front 1000 mm

yes no □ yes no □

yes no yes no

yes no

Actual distances

Top____mm

Bottom____mm

Left ____ mm

Right ____ mm

Actual distances

Top____mm

Front ____ mm

Back ____ mm

Left ____ mm

Right ____ mm

Service engineer to tick appropriately

- Is the indoor unit level breadthwise and depthwise and is the drain pipe free of air locks?

- Is the drain hose inclined to ensure a smooth flow of condensed water?

IDU

H = 1 m - 1 cm

- Has a proper slope been maintained towards the drain outlet to ensure a smooth flow of drain water? (Use horizontal level gauge)

ward
Water Leakage

ot Raise
Water Leakage

- Is the heat insulative material securely attached to the connections on the piping of the indoor unit?

- Has putty been applied to close the piping hole on both sides to avoid air leaks and water coming inside?

Seal small openings around pipings with a gum type sealer

enings with sealer

yes no

□

yes no

□

yes no

□

yes no

□

yes no

□

Service engineer to tick appropriately

• Are the air outlets of the indoor and outdoor units free of obstacles? Yes No
• Has each of the pipe connections been checked for gas leaks? Yes No
• Is the voltage at the exclusive power outlet within the range of rated voltage +/- 10% of standard 220 volts? Yes No
• Are the fuse and wire gauge used of the following specifications? Yes No

	12K	18K 24K
Fuse (MCB Rating)	12A	16A	16A/25A
Wire Size	1.5mm 1^2 mm ^2	1.5mm

- Run the machine for 30 minutes and check for the following:

a) Vibration/abnormal noise heard?
b) Electric power supply input volts and earthing for the unit

1) Voltmeter reading more than 100 mV and less than 3 V between N&E?
2) Supply between L&E- Rated Voltage +/-10%? Yes No
3) Supply between L&N - Rated Voltage +/- 10%?

N = Neutral, L = Line, E = Earth

• Temperature readings taken

Indoor Unit Return Air Temp ____ °C (T1)

Indoor Unit Supply Air Temp ____ ^ C (T2)

Delta T = ____ (T1- T2) between 8-14 °C?

- Checked drainage of condensed water from evaporator side to drain outlet by pouring water at the base of evaporator coil?

Yes No

Yes No

□

Yes □

No

Yes □

No

Yes □

No

Yes □

No

Yes □

No

Yes □

No

Installed by ____ Signature ____

Customer's response

The installation person was courteous and helpful

yes □

no □

I would describe my experience with the process of installation as

Unacceptable □

Satisfactory □

Non-satisfactory □

Very satisfactory □

I certify that the above information and checks have been done to my satisfaction and I am fully satisfied with the installation of the air conditioner

Customer's signature

Date

Time

Methodology for Cooling Capacity test setting

Full load and half load capacity test modes are applicable only for testing purpose in authorized test laboratories. Before setting the mode, lab conditions to be stabilized as per IS1391 Part 2.

Full Load (100%) Capacity settings:

Step 1: By using remote controller turn ON the unit.
Step 2: Set Cool mode at 30 deg C set temperature and Fan speed medium.
Step 3: Press Sleep button continuously for 7 times within 10 sec.
Step 4: IDU will beep thrice.
Step 5: Change the set temp to 25 Deg C.
Step 6 : Full load test setting will be activated & IDU display will show "FL".

Half Load (50%) Capacity settings:

Step 1: By using remote controller turn ON the unit.
Step 2: Set Cool mode at 30 deg C set temperature and Fan speed medium.
Step 3: Press Sleep button continuously for 7 times within 10 sec.
Step 4: IDU will beep thrice.
Step 5: Change the set temp to 26 Deg C.
Step 6 : Full load test setting will be activated & IDU display will show " HL ".

Note: During cooling capacity test vertical louver should be in straight position.

WARRANTY

IFB AIR CONDITIONERS, TERMS AND CONDITIONS

For safety and as a standard operating practice, it is important to install the air conditioner with an MCB, with proper provision of electrical earthing. Always ensure that the MCB is in ON condition and not in a bypass condition.

ONE YEAR STANDARD WARRANTY\*

IFB Industries Ltd (IFB) (the Company) warrants to the original domestic purchaser of this air conditioner (appliance) that it is free from defects in workmanship and materials. During 12 months, starting from the date of purchase of the new air conditioner, all the parts of the air conditioner which prove to be defective as a result of workmanship and/or materials, shall be replaced or repaired free of charge (except for the parts described in this warranty as beyond the scope of the above) on intimation to the Company/Company's authorized service center nearest to the place where the appliance is installed.

*Plastic and rubber parts, sheet metal/paint affected by environment led rusting on exposure and damages to the remote as a result of poor handling are not covered under the warranty.

Additional Warranty Parts

Compressor After Expiry of Standard Warranty of 1 year, an additional warranty of 9 years will be provided on the inverter compressor. During this extended warranty period, IFB will repair/replace the compressor. This is subject to an inspection by IFB of the compressor and proof that the air conditioner has been serviced only by IFB's authorized service franchisee. The repair/replacement shall be valid for manufacturing defects only. For compressor failures that are not on account of manufacturing defects, gas charging and labour costs will be chargeable.

PCB/Controller (Outdoor PCB Only)

After Expiry of the Standard Warranty of 1 year, an additional warranty of 4 years will be provided on the outdoor PCB only. During this extended warranty period, IFB will repair/replace the PCB (Outdoor PCB Only) which proves upon inspection by IFB or its authorized service franchisee to be found defective due to manufacturing defect.

FOUR YEARS SUPER WARRANTY ON PRODUCT\*

Super Warranty of 4 years may be purchased by the customer by paying additional amount as prevalent at the time of installation/purchase (as per the Company's prevalent scheme). This will be valid only on the appliance as provided first hand by the Company. During this super warranty period, functional parts other than sheet metal and plastic parts shall be covered for replacement/ repairs. Any additional expenses or visit charges shall be extra and is not covered under the scope of super warranty. This will be subject to inspection by IFB and proof that the air conditioner has been serviced only by the authorized service franchise of IFB. Replacement/of repair of parts shall be valid for manufacturing defects only.

Super warranty is applicable and remain valid provided Customer avails two annual preventive maintenance service every year by logging call with IFB contact center from 2nd year till the 5th year (on chargeable basis as prevalent at the time of call logging), which will be carried out by an authorized service franchise of IFB.

*Plastic and rubber parts, sheet metal/paint affected by environment led rusting on exposure and damages to the remote or other parts as a result of poor handling are not covered under the scope of super warranty. Any additional service maintenance cost will be on chargeable basis. The super warranty must be purchased at the point of sale/installation only. Any subsequent purchase will not be acceptable. Super warranty shall be applicable on models as decided by IFB.

Note IFB shall not honor any warranty/super warranty related claims for the air conditioners installed and/or serviced/ repaired or parts modified by unauthorized service providers.

The one-year warranty and additional four year Super Warranty are subject to the following

TERMS & CONDITIONS

1 This warranty is not valid in case of the following events:

a) If the warranty card is not fully and properly filled in and signed at the time of purchase/installation by the Company's authorized franchisee/dealer/service engineer.

b) If the completed warranty card is not presented to the authorized personnel at the time of service/repair. Customers may be asked to furnish proof of ownership and date of purchase by showing the sales receipt/purchase invoice. The warranty claims as accepted will be only for the original purchaser. The warranty is non-transferable to anyone who subsequently purchases, leases or otherwise obtains the product from the original purchaser.

c) If the appliance is not used in accordance with the manufacturer's instructions given in the user manual.

d) If the air conditioner has been installed, serviced, repaired, opened or tampered with by unauthorized personnel.

e) If defects arise/are caused by accidents, alteration, misuse, neglect, abuse, substitution of original components with spurious/non genuine components, use of/application of harmful chemicals on machine, attack by household pest/rodents, fire, flood, earthquake, lightning, and/or any other acts of God/natural calamities.

f) If defects arise with optional accessories like stabilizer, machine covers, extended power cables, outdoor unit stands, remote controls (except external damage/mishandling), inlet/outlet hoses, control knobs, electrical plugs, other detachable parts etc.

g) If damages occur owing to improper electrical circuits outside the air conditioner or by any external electrical supply thereof. This includes failures due to erratic power supply, fluctuations beyond rated voltage ± 10% voltage and frequency of 50 Hz ± 3%, AC power supply systems.

h) If the machine is run frequently on power back-up or solar power.

i) If the machine serial number on the appliance is defaced, missing or altered.

j) If the appliance is taken out of the territory of the Republic of India.

k) This warranty will automatically terminate on the expiry of the warranty period of 12 months or extended warranty (optional) as per the scheme, even if the air conditioner has not been in use for any time during the warranty period or extended warranty period for any reason.

2 This warranty does not cover normal wear and tear, any type of corrosion, rust, stains, scratches, peeling paint, dents on the body. Also, the Company is not liable for any incidental or consequential damages.

3 Parts replaced or repaired under Standard and Extended Warranties are warranted throughout the remainder of the original warranty period.

4 The Company is not liable for any delay in servicing owing to reasons beyond the control of the Company or any of its authorised service centres.

5 This warranty is not applicable if the air conditioner is used for commercial/semi-commercial purposes.

6 For any service under warranty beyond city/town/municipal limits from the Company/authorised service centres, a fixed charge as per the Company's norms will be collected from the customer, in addition to the actual to and fro charges by the shortest route. Alternatively, the customer may bring the appliance to the nearest service centre for carrying out the necessary repairs, at customer's own cost.

7 The warranty does not cover regular maintenance, including cleaning of filters, drain tray and condenser wet servicing.

8 The Company shall not be liable for any damage arising out of poor or inadequate maintenance by unauthorized personnel, improper voltage (voltage surge, excessive voltage etc) or overloading of the air conditioner.
9 The Company shall not be liable for any damage to property or any loss incurred/caused in the process of carrying out repair or servicing of the air conditioner if it is installed in positions or locations which make it difficult or unreasonable for such damage to be avoided.
10 The warranty does not cover the cost of providing access to any air conditioner by whatever means necessary, for the purpose of carrying out repairs or servicing, in the event that the location or position at which the air conditioner is installed is such that there is no reasonable access to the air conditioner for such repairs or servicing to be carried out.
11 While the Company endeavours to repair any defect, it is subject to availability of parts from its manufacturers.
12 IFB reserves the right to change, add or delete any terms and conditions herein at any time without prior notice.
13 The warranty shall be governed by and construed in accordance with the laws of the Republic of India.
14 The customer shall comply with the applicable eWaste guidelines. Any defective parts replaced even after the warranty period shall be handed over to authorized representatives of the Company for environment friendly disposal.
15 According to the eWaste regulations, the life of the air conditioner is 10 years. There shall not be any liability of the Company towards machine/service/availability of spares after 10 years of the first sales invoice of such machine, even on payment basis.
16 Customers are eligible to avail 3 preventive maintenance services during the first year of the warranty free of cost. However, in no circumstance may the customer extend or avail these services beyond the first year of warranty. The customers may avail the 3 free services by registering a complaint with the Company's Customer Care Centre.