KASPUSBAC1A - Air-conditioner Kogan - Free user manual and instructions

USER MANUAL KASPUSBAC1A Kogan

Close-up of a white electronic component with three vertical pins (no visible text or symbols)

KOGAN SMARTERHOME™ SMART PLUG WITH ENERGY METER

USB-A AND USB-C PORTS

KASPUSBAC1A, KASPUSBAC2A, KASPUSBAC4A

Safety & Warnings 3

Overview 3

Before First Use 4

Connect to SmarterHome™ App 4

Google Home Control 10

Amazon Alexa Control 13

Operation 16

FAQ 18

Specifications 18

Notes 19

SAFETY & WARNINGS

Ensure to read all warnings and instructions in this user guide prior to first use. Retain this user guide for future reference.

• Ensure this smart plug is connected via a wall socket when in use.
• This smart plug is intended to be used as a power supply.
• This smart plug is intended for indoor use only.
• Do not use this smart plug in areas of high moisture (for example, bathroom, kitchen).
• This smart plug operates at a maximum of 10A, 2400W. Do not overload the smart plug with devices needing higher power requirements.
• The maximum rated ambient temperature of this smart plug is 50^ .
• The maximum height this smart plug can be used is 2000m above sea level.

OVERVIEW

USB-A USB-C Output AC outlet Power button Power indicator

BEFORE FIRST USE

Insert the smart plug into a wall socket and turn the socket on. Press the power button.

CONNECT TO SMARTERHOME™ APP

Install App

Download the "Kogan SmarterHome" app from the Play Store (Android) or App Store (iOS).

Register

If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS.

To register:

1. Tap to enter registration page.
2. The system automatically recognises your country/area. You can also select your country code manually. Enter your email address and tap 'Next.'
3. Alternatively, you can select 'Register by mobile number' and enter the verification code sent to you by SMS.
4. Create a profile on the next page to define your location and room.

Email Mobile Number Register by Email Australia +61 [e-mail] Get Verification Code Agree Service Agreement and Privacy Policy

Email Mobile Number Register by Mobile Number Australia [phone] Get Verification Code I Agree Service Agreement and Privacy Policy

Set device in pairing mode

When the device is first turned on, it may automatically enter pairing mode (the power indicator will be rapidly flashing).

If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by press and holding the power button for 5 seconds until the power indicator starts rapidly flashing.

Add device through network

1. Once registered, tap "+" in the upper right corner of the app's home page to add a new device through the network.
2. Select the product type from the list of options in the app (Electrical > Plug with Energy Meter).
3. Ensure that the device is in pairing mode, with the power indicator rapidly flashing, and tap "Confirm light is rapidly flashing".

Home Light Rain 19°C 80.0% 1006 MPa Outdoor Temperature Outdoor Humidity Outdoor Air Pressure All Devices Living Room Master Badroom ... No devices, please add Add Device

Cancel Add Manually Auto Scan Lighting Power strips Plug with Energy meter Electrical Home Security Heating & Cooling Air Treatment Cleaning Applianc... Kitchen Applianc... Other

Cancel EZ Mode Reset the device first. Set the device to pairing mode by following the product Smarter Home Wifi Connection Guide. Confirm the products is in pairing mode per connection guide. LED Digital Painting LED Screen Painting Lettie Clearing on Internet Devices (Windows 8) Confirm indicator rapidly blink Next

1. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.

2. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.

3. After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app's home page. Tap the device listing to enter its control page.

Cancel Enter Wi-Fi Password 2.4GHz 5Ghz ✓ ✗ Only 2.4G Wi-Fi networks are supported > Your Network Name Password Confirm

Add Device Connecting... Place your router, mobile phone, and device as close as possible 15% • Device found • Register Device to Smart Cloud • Initiating device...

Add Device Device added successfully Smart Plugs Living Room Master Bedds... Study Room Diving Room Kitchen Spars Room Backyard Done

Notes:

• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.

If the smart plug cannot be connected to the SmarterHome™ app after several attempts, try using the AP mode connection steps outlined in the next page.

AP mode connection steps

Set device in pairing mode

When the device is first turned on, it may automatically enter pairing mode (power indicator will be slowly flashing).

If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and the power button for 5 seconds until the power indicator starts flashing slowly.

Using AP Mode to add device

1. Once registered, tap “+” in the upper right corner of the app’s home page to add a new device through the network.
2. Select the product type from the list of options in the app (Electrical > Plug with Energy Meter), and then select "EZ Mode" from the top-right corner when asked to reset the device.

Home Light Rain 19°C Outdoor Temper... 80.0% Outdoor Humidity 1006.8hPa Outdoor Air Press... All Devices Living Room Master Bedroom No devices, please add Add Device

Cancel Add Manually Auto Scan Lighting Power Shops Plug with Energy-market Electrical Home Security Heating & Cooling Air Treatment Cleaning Applianc... Kitchen Applianc... Other

Cancel EZ Mode Reset the device first. Set the device to pairing mode by following the product Smarter Home Wifi Connection Guide. Confirm the products is in pairing mode per connection guide. LED Light Building LED Audio System Confirm Indicator rapidly blink Next

1. Select "AP Mode" for the set-up type.
2. Ensure that the device is in pairing mode, with the power indicator flashing slowly, and tap "Confirm light is slowly flashing".
3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.

Cancel Reset the device fi Set the device to pairing mo product Smarter Home Wi Confirm the products is in pa connection guide. EZ Mode Default AP Mode Confirm indicator rapidly blink Next

Cancel AP Mode Reset the device first. Set the device to pairing mode by following the product Smarter Home Wifi Connection Guide. Confirm the products is in pairing mode per connection guide. Confirm indicator slowly blink Next

Cancel Enter Wi-Fi Password 2.4GHz 5GHz ✓ X only 2.4 GHz in networks are supported > Your Network Name Password Confirm

1. Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device's Wi-Fi hotspot to ensure a connection.

Note:

If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly. Try repeating the steps outlined above to ensure your device is ready for connection.

1. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
2. After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app's home page. Tap the device listing to enter its control page.

Cancel Connect your mobile phone to the device's hotspot 1. Connect the phone to the hotspot shown below. 2. Go back to the app and continue to add devices. Go to Connect

Cancel Adding device... Ensure that the Wi-Fi signal is good. 01:56 Scan devices. Register on Clouds Influence the device.

Add Device Device added successfully Smart Plugs Living Room Master Bedroom... Study Room Dining Room Kitchen Spare Room Backyard Done

Notes:

• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.

GOOGLE HOME CONTROL

Note:

You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device.

Adding "SmarterHome" to the Google Home app

1. From the home page of the Google Home app, select the "+" icon to access the 'Add and manage' page.
2. Select 'Set up device', then under the Works with Google banner, select 'Have something already set up?'
3. Select the search bar and type 'Smarter Home' to locate the Kogan SmarterHome™ service.

10:17 Home Media News Settings

10:17 Add and manage Add to home Setup device Invite home member Create speaker group Create new home Manage services Music and audio Videos and photos Offers Offers

10:17 Set up Set up new devices or add existing devices and services to your home New devices Set up new devices in your home Google-Home, Chromecast, Smart Displays, devices labelled "Make for Google", file C by GE smart Building, and Philips Hue Bluetooth (without Hue Bridge) Works with Google Have something already set up? Link your smart home services like Philips Hue (with Hue Bridge) and TP Link

1. Tap 'Authorise' to grant Google permission to access the SmarterHome™ app and your devices.
2. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.

10:18 ← smarter home Add new Smarter Home homes home homeless 1 2 3 4 5 6 7 8 9 0 q w e r t y u i o p a s d f g h j k l z x c v b n m 123 ,

10:20 px1.tuyaus.com Google will be able to: Receive your public profile Control your devices over internet Authorize You can revoke permission at any time.

1. Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines.
2. Tap on any of the devices to view a list of available commands.

10:21 Add smart home devices Select devices and add to a room Devices connected within the SmarterHome™ app will appear here if compatible ADD TO A ROOM

10:23 + Home ▼ Media Routines Settings Back garden 2 devices Dog Cam (Backyard) Dog Cam (Undercover) Kitchen 1 device Cat Cam (Kitchen) Other cast devices 9 devices

AMAZON ALEXA CONTROL

Note:

You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device.

Adding "SmarterHome" to the Alexa app

1. From the home page of the Alexa app, select the “≡” icon in the top-right and select Skills & Games from the sidebar.
2. Select the search bar and type 'Smarter Home' to locate the Kogan SmarterHome™ skill.

10:28 Good Morning SOUTH MELBOURNE [e-mail] Morning 28° Afternoon 30° Evening 22° Call and message from your Alexa devices Add your phone number to get started.

Add Device Lists Reminders & Alarms Contacts Routines Things to Try Skills & Games Activity Help & Feedback Settings

10:29 SEARCH Search smarter home 1 Result Sort: Relevant Smarter Home "Aless, act bedroom light to cool white." Smart Home

1. Tap 'Enable to Use' to add the Kogan SmarterHome™ skill to Alexa.

2. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.

3. Tap 'Authorise' to grant Alexa permission to access the SmarterHome™ app and your devices.

10:29 SMARTER HOME Smarter Home Kogan.com Rated Guidance Suggested ENABLE TO USE Account linking required If you have any problem when you use this skill, you can contact us with email: [e-mail] Amazon Alexa and the Kogan smart home products work together to help you control home appliance nice and easy.... See More Start By Saying English (AU) "Alexa, set bedroom light to cool white." "Alexa, dim the bedroom light to 50%." "Alexa, turn on my livingroom heater." About Note Email: Promote Play Custom

10:30 Account Binding https://pxyl.tuyaus.com/pl/?client_id=amznl_ Alexa by Amazon will be able to: Receive your public profile Control your devices over Internet Authorize You can revoke permission at any time.

1. Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account.

2. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa's voice commands.

Alexa is looking for devices to connect... This may take up to 45 seconds.

10:45 ALL DEVICES Cat Cam (Study) - New Device Alexa on this Phone Online Cat Cam (Kitchen) Fish Cam light 1 Plug 1

Note:

Please note that Alexa can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product's smart functionality, please use the Kogan SmarterHome™ app.

OPERATION

Interface

Smart plug Menu Power On Power Timer Electric setting

Name Description
Power	Pressing will turn the smart plug on.Pressing again will return the smart plug to standby.
Timer	Contains various timing and scheduling modes (Countdown, Schedule, Circulate, Random, Inching).
Electric	Contains information about the current and total energy consumption used by the smart plug in KWh.
Setting	Contains information about miscellaneous settings that can be adjusted.

Timer menu

Schedule Timer Schedule Random Inching Astronomical

Name Description
Timer	Schedule a timer for when the smart plug will turn off.
Schedule	Allows users to set a regular schedule for the smart plug to turn on/off.
Random	Sets the smart plug to turn on/off at random intervals within a certain time period.This may be useful if you will be away and would like to simulate there is someone home to ward off potential thieves.
Inching	Triggering this setting allows users to set a duration the smart plug will automatically turn off after being turned on every time (for example, turning off automatically after 1 minute when turned on).Users will not need to frequently set a countdown and hence this may be useful for common tasks such as turning the lights off.
Astronomical	Allows the smart plug to operate based sunrise and sunset times.Note that devices intending to use this mode must support local time.

FAQ

What devices can I control with the smart plug?

You can control lights, fans, humidifiers, portable heaters, and any other small home appliances.

What do I do if the smart plug is not connecting to the Kogan SmarterHome™ app?

• Unplug the smart plug from the power supply.
• Insert the smart plug back into the power supply, switch on the socket and hold the power button for 5–10 seconds until the power indicator starts flashing rapidly.

What do I do if the smart plug is not able to share or connect to Amazon Alexa?

• Tap the menu button on the interface of the smart plug, then tap 'Reset to factory setting' to reset the smart plug.
• Reconnect the smart plug to the Kogan SmarterHome™ app then connect with Amazon Alexa.

How do I remove the smart plug from the Kogan SmarterHome™ app?

• Tap the smart plug on the device list in the Kogan SmarterHome™ app then tap the menu button in top right corner of the screen and remove the smart plug.
• Alternatively, press and hold the smart plug on the device list in the Kogan SmarterHome™ app to remove.

SPECIFICATIONS

Dimensions 100 x 43.5 x 28.8mm

For socket-outlets 240VAC, 50–60Hz, 10A

Energy monitoring Yes

USB x1 USB-A, x1 USB-C, 5V==2.0A (total)

Wi-Fi standard 802.11b/g/n

Radio frequency ISM BAND, 2.412–2.484GHz

Security WEP, WAPI, TKIP, AES

Operation temperature -20 °C–70°C

NOTES

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

kogan.com