CC-118 - Unknown Impact - Free user manual and instructions

Product Type	Micro Clamp
Brand	Impact
Model	CC-118
Maximum Clamp Tube Size	1.2 in (30 mm)
Receiver Size	5/8 in (baby pin)
Maximum Load Capacity	5 lb (2.27 kg)
Intended Use	Mounting lighting fixtures or accessories to overhead pipes or vertical risers
Recommended Accessory	Impact CA-100 Double End Spigot with 1/4"-20 and 3/8" Male Threads
Warranty	One-year limited warranty to original purchaser
Cleaning Instructions	Use a soft, dry cloth
Safety Warning	Do not exceed maximum load capacity; ensure item is secure before use
Material	Metal (steel/aluminum, typical for clamps)
Color	Black (as shown in image)
Compatibility	Designed for baby pin (5/8 in) accessories
Storage	Keep away from children

Frequently Asked Questions - CC-118 Impact

What is the maximum tube diameter the Impact CC-118 can clamp onto?

The Impact CC-118 Micro Clamp can clamp onto tubes up to 1.2 inches (30 mm) in diameter.

What size receiver does the CC-118 have?

It has a 5/8 inch (baby pin) receiver, commonly used for mounting lighting fixtures and accessories.

What is the weight capacity of the Impact CC-118?

The maximum load capacity is 5 lb (2.27 kg). Do not exceed this limit.

Can I attach a light directly to the CC-118?

Yes, if the light has a 5/8 inch baby pin. Alternatively, use the recommended Impact CA-100 Double End Spigot with 1/4"-20 and 3/8" threads.

How do I clean the CC-118 clamp?

Clean it with a soft, dry cloth. Do not use liquids or abrasive cleaners.

What is the warranty on the Impact CC-118?

It comes with a one-year limited warranty to the original purchaser, covering defects in materials and workmanship.

Is the CC-118 suitable for outdoor use?

It is designed for studio and location use, but should be kept dry and away from moisture. No specific outdoor rating is given.

How do I ensure safe mounting with the CC-118?

Always check that the clamp is securely tightened, the load does not exceed 5 lb, and the item is intact before use. Keep away from children.

Can I use the CC-118 with a C-stand?

Yes, it can be used on C-stands with a 5/8 inch pin or clamped onto a tube up to 1.2 inches thick.

Where can I find accessories for the CC-118?

Visit the Impact website at www.ImpactStudioLighting.com for compatible accessories like the CA-100 Double End Spigot.

USER MANUAL CC-118 Impact

Close-up of a black mechanical clamp with a metallic screw and handle, against a yellow background (no text or symbols visible)

CC-118

Micro Clamp

INSTRUCTIONS

Introduction

Thank you for choosing Impact.

The Impact CC-118 Micro Clamp features a baby (5/8 inch) receiver for mounting an item with a baby pin. Often used for attaching a lighting fixture to an overhead pipe or a vertical riser, this clamp is also suitable for many other uses in the studio and on location.

Recommended Accessory

- Impact CA-100 Double End Spigot with 1/4"-20 and 3/8" Male Threads Visit our website at www.ImpactStudioLighting.com for more Impact accessories.

Specifications

Maximum clamp tube size: 1.2 in. (30 mm)

Receiver size: 5/8 in.

Maximum load capacity: 5 lb.

Warnings ⚠️

• Please read and follow these instructions, and keep this manual in a safe place.
• Handle the unit with care.
• Clean the unit with a soft, dry cloth.
• Keep this unit away from children.
• Make sure everything is secure before proceeding.
• Make sure the item is intact and that there are no missing parts.
• Do not exceed the maximum load capacity.
• Use caution when mounting anything at the maximum load capacity.
• All photos are for illustrative purposes only.

One-Year Limited Warranty

This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization ("RMA") number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.

IMPACT™

A Gradus Group Brand

Product warranty provided by the Gradus Group.

www.gradusgroup.com

IMPACT is a registered trademark of the Gradus Group.

© 2015 Gradus Group LLC. All Rights Reserved.