IV-1000WF - Vacuum Cleaner Imarflex - Free user manual and instructions

Product Type	Water Filtration Vacuum Cleaner
Brand	Imarflex
Model	IV-1000WF
Voltage	230V AC
Weight	Approx. 8 kg
Dimensions	Approx. 45 x 30 x 30 cm
Filtration System	Water filtration with HEPA and Carbon filters
Vacuuming Capability	Dry and wet vacuuming
Blow Dry Function	Yes (hose attaches to blow slot)
Dust Container Type	Plastic container with water filtration compartment
Safety Floater	Yes (automatic suction stop when water full)
Included Accessories	Hose Assembly with Air Flow Regulator, 2 Extension Wands, Crevice Tool, Small Brush, Carpet Brush (wet/dry), Squeegee Nozzle
Handle	Yes (on vacuum head)
Wheels	Yes (for mobility)
Clasp	Yes (to secure head to container)
Maintenance	Washable parts (except motor head); clean HEPA and Carbon filters with soft brush
Usage	Indoor use only; do not pick up flammable liquids
Warranty	Warranty card included (fill and send)

Frequently Asked Questions - IV-1000WF Imarflex

How to use the wet vacuuming function?

For wet vacuuming, attach the carpet brush and press the button backward (for wet carpet). Ensure the water filtration compartment is properly installed. After use, switch off and empty the water container. Do not pick up flammable liquids.

How to clean the HEPA and Carbon filters?

Unplug the vacuum. Remove filters and clean with a soft brush. Do not wash with water. Ensure filters are dry before reinserting.

How to empty the water after wet vacuuming?

When the safety floater stops suction or you hear abnormal sound, switch off. Open the clasp, remove the vacuum head and water filtration compartment, then unload the water.

Can I use the vacuum for dry vacuuming only?

Yes. For dry vacuuming, attach the carpet brush and press the button forward. You can also use other accessories like crevice tool or small brush.

How to use the blow dry function?

Detach the hose from the hose inlet and attach it to the blow slot on the vacuum head. Switch on to blow air. Useful for drying surfaces or blowing debris.

What accessories are included?

The vacuum includes a hose assembly with air flow regulator, two extension wands, a crevice tool, a small brush, a carpet brush (with dry/wet switch), and a squeegee nozzle for water spillage.

Is it safe to use near water?

The vacuum is designed for wet pickup but the head should not be immersed in water. Do not use near gas stoves or fireplaces. Always unplug before cleaning.

How often should I clean the filters?

Clean the HEPA and carbon filters regularly, especially after heavy use. Use a soft brush to remove dust. Do not wash with water.

What does the safety floater do?

The safety floater automatically stops suction when the water level in the container is full, preventing overflow and motor damage. You should empty the water immediately.

How to assemble the vacuum for use?

Place the water filtration compartment on the rim of the plastic container. Put the vacuum head on top and push up the clasp to secure. Insert the hose assembly into the hose inlet. Attach extension wand and desired accessory. Plug in and switch on.

USER MANUAL IV-1000WF Imarflex

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the convenience outlet (230Va.c.).

3. Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be replaced with the same type and size or bring the unit to the nearest authorized service center.

4. Do not use two-way socket with another appliance.

5. Do not use the Vacuum Cleaner near gas stove, electric stove or fire place.

6. Close supervision is necessary when any appliance is used by or near children.

7. To protect against electric shock, do not immerse the Vacuum Cleaner Head in water.

8. Do not use the Vacuum Cleaner other than its intended use.

9. Avoid sharp objects that can get stuck in and block the hose.

10. Never pick up inflammable or corrosive liquids such as petrol or other volatile substance.

11. Be sure that the Water Filtration Compartment is attached when using the vacuum.

12. Never use the unit in sucking Flammable liquids, chemicals, and cigarette butts.

13. Never leave the water in the Tank for a long time.

14. Do not use it outdoors.

15. Save this instruction for future reference.

DESCRIPTION OF PARTS

1. Handle
2. Blower
3. Switch Button (ON/OFF)
4. Accessory Holder
5. Safety Floater
6. Water Filtration Compartment
7. Carbon Filter
8. HEPA Filter
9. Hose Inlet
10. Clasp
11. Plastic Container
12. Wheels
13. Hose Assembly with Air Flow Regulator
14. Extension Wands
15. Crevice Tool
16. Small Brush
17. Carpet Brush
18. Squeegee Nozzles

HOW TO USE

Close-up of hands adjusting a mechanical component (no visible text or symbols)

1. To Remove the Vacuum Head
2. Pull down the Clasp

Close-up of hands holding a bowl with a lid (no visible text or symbols)

1. Put the Water Filtration Compartment on the rim of the Plastic Container, simply fit the rubber gasket on the rim.

Close-up of hands handling a circular metal object with a mesh basket (no text or symbols visible)

1. Put the Vacuum Head on the Plastic Container and push up the Clasp.

Close-up of a hand holding a flexible hose with a bulbous tube (no visible text or symbols)

1. Insert the Hose Assembly into the Hose Inlet until it fits.

Close-up of a hand holding a cylindrical object with an arrow pointing to it (no text or symbols visible)

1. Insert the Detachable Extension Wand into the Hose Assembly Tube.

Close-up of a black cable connector with a metallic clip (no visible text or symbols)

1. Insert the desired accessory into the Extension Wand: Carpet Brush, Squeegee Nozzle, Small Brush and Crevice Tool

Close-up of a black foot pressing down on a white surface, no visible text or symbols

Carpet Brush – for carpet. Press the button forward for dry carpet. Press the button backward for wet carpet

Close-up of a white ceramic spoon on tiled floor (no text or symbols visible)

Squeegee Nozzle- for water spillage, hard floor, windows surfaces

Close-up of ceiling-mounted air ducts with visible insulation and ventilation (no text or symbols)

Small Brush - for cleaning furniture, screen, blinds, etc.

Close-up of a white tool tip applying material to a textured surface (no visible text or symbols)

Close-up of a hand pressing a button on a device (no visible text or symbols)

Close-up of a mechanical component with a curved pipe and water flowing (no visible text or symbols)

Crevice Tool - for cleaning corners, drawer, etc.

1. Plug the vacuum into the convenience outlet.

TO USE THE BLOW DRY FUNCTION- put the hose assembly on the Blow slot and switch ON.

1. Switch ON.

2. Switch OFF after use.

. UNLOADING THE WATER

• Switch OFF when Safety Floater stop suction or hearing abnormal sound.
• Open the Clasp, remove the Vacuum Cleaner Head, Water Filtration Compartment, and unload the water.

CLEANING AND MAINTENANCE

1. Unplug the Vacuum Cleaner from the convenience outlet before cleaning.
2. All parts are washable with soap and water except the Vacuum Head.
3. Clean the HEPA FILTER and CARBON FILTER with a soft brush.
4. Never leave dust inside the Container.

REMINDER: Please do not forget to fill up and send the warranty card