CB-1 - Audio DAP-Audio - Free user manual and instructions

USER MANUAL CB-1 DAP-Audio

Technical line drawing of a mechanical enclosure or housing with internal components (no text or symbols)

ENGLISH

CB-1

V1

Ordercode: D6536

CB-1

Table of contents

Warning 2

Safety Instructions....2

Operating Determinations....3

Return Procedure ....3

Claims....3

Description of the device....4

Installation....4

Product Specifications....5

Warning

For your own safety, please read this user manual carefully before your initial start-up!

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a device must be returned to the factory, it is important that the device is returned in the original factory box and packing.

Your shipment includes:

• DAP Audio CB-1 (1-unit cover box for volume controllers)
- User manual

Technical line drawing of a rectangular enclosure with internal components and mounting holes (no text or symbols)

CAUTION!

Keep this device away from rain and moisture! Unplug mains lead before opening the housing!

Safety Instructions

Every person involved with the installation, operation and maintenance of this system has to:

- be qualified

• follow the instructions of this manual

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer a dangerous electric shock when touching the wires!

Before the initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the system.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the system are not subject to warranty.

This system contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system.

• Never remove warning or informative labels from the unit.
• Never leave any cables lying around.
• Only use system indoors, avoid contact with water or other liquids.
- Avoid flames and do not put close to flammable liquids or gases.
• Make sure you do not use the wrong kind of cables or defective cables.
- If system is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.
- If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Dap Audio dealer for service.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.

Operating Determinations

If this system is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious injuries and damage of property !

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the customer's responsibility. Highlite reserves the right to use its own discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper inside the box:

01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due to shipping. Transportation damage has to be reported to us within one day after receipt of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting.

Description of the device

Features

The CB-1 is a cover box for the following volume controllers: D6531 – VCB-6, D6532 – VCB-12 and D6533 – VCB-36.

• Material: ABS
• Color: White
  • Dimensions: 80 x 50 x 80 mm (LxWxH)
  • Weight: 0,06 kg

Optional accessories:

D6531 - VCB-6

D6532 - VCB-12

D6533 - VCB-36

Technical line drawing of a rectangular enclosure with internal components and mounting holes (no text or symbols)

Installation

Remove all packing materials from the CB-1. Check if all foam and plastic padding is removed. Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.

Refer installation to a qualified technician!

01) Install the CB-1 into the wall.
02) Demount the VCB-6, VCB-12 or the VCB-36 (see fig. 01).

Diagram illustrating a mechanical device with labeled components including a housing, panel, and dial indicator.

Fig. 01

CB-1

03) Install the VCB into the CB-1 (see fig. 02). Use the 6 included mounting screws to fit the volume controller to the cover box.
04) Replace the front panel and the volume control.

Technical diagram illustrating the assembly of a device with labeled components and directional arrows indicating flow or movement.

Fig. 02

Product Specifications

Material:

ABS

Color:

White

Dimensions:

80 × 50 × 80 mm (LxWxH)

Weight:

0,06 kg

80 mm 80 mm 50 mm

Design and product specifications are subject to change without prior notice.

CE

Website: www.Dap-audio.info

Email: [e-mail]