95-3025B - Kit voiture Metra - Free user manual and instructions
Find the device manual for free 95-3025B Metra in PDF.
User questions about 95-3025B Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kit voiture in PDF format for free! Find your manual 95-3025B - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 95-3025B by Metra.
USER MANUAL 95-3025B Metra
text_image
iPod 17 days Disarters Disarters 2:15 10 AM 4 PM 8 PM 9 AM 10 AM 11 AM 12 AM 1 PM 2 PM 3 PM 4 PM 5 PM 6 PM 7 PM 8 PM 9 PM 10 PM 11 PM 12 PMBuick Encore 2013-2016
KIT FEATURES
- ISO DDIN radio provision
- Painted to match the factory finish
KIT COMPONENTS
• A) Radio housing • B) Radio brackets
A
natural_image
Technical line drawing of a mechanical bracket or frame (no text or symbols)B
natural_image
Two technical line drawings of metal bracket components (no text or symbols)TABLE OF CONTENTS
Dash Disassembly ....2 Kit Assembly ....3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: TBA Antenna Adapter: 40-EU55
TOOLS REQUIRED
- Panel removal tool • Phillips screwdriver
- 9/32" Socket wrench
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
DASH DISASSEMBLY
- Unclip, unplug and remove the dash panel surrounding the radio.
- Remove (4) 9/32" screws securing the radio/climate control panel, then unplug and remove.
- Remove (2) 9/32" screws securing the radio chassis, then unplug and remove.
Continue to Kit Assembly
Please visit Metraonline.com for Dash Disassembly illustrations.
KIT ASSEMBLY
ISO DDIN radio provision
- Attach the radio brackets to the radio using the screws supplied with the radio. (Figure A)
- Locate the factory wiring harness and connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation.
- Slide the radio/bracket assembly into the radio cavity in the sub dash. (Figure B)
- Attach the radio housing using the factory screws. (Figure C)
- Reassemble the dash in reverse order of disassembly.
text_image
Technical diagram of an electronic component with labeled pins and mounting points(Figure A)
natural_image
Technical line drawing of a mechanical device with mounting brackets and a directional arrow (no text or symbols)(Figure B)
natural_image
Technical line drawing of a vehicle dashboard frame with mounting brackets and a control panel (no text or symbols)(Figure C)
IMPORTANT
If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by supplying in the most recognized and supported
mobile electronics school in our industry.
Log onto www.installennstitute.com or call
800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians