PIC16F639 - Microcontroller Microchip - Free user manual and instructions

USER MANUAL PIC16F639 Microchip

Processor Extension Pak (PEP) and Debug Header Specification

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.
- Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.
- There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
- Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable."

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated.

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer, LANCheck, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC ^32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

The Embedded Control Solutions Company and mTouch are registered trademarks of Microchip Technology Incorporated in the U.S.A.

Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet, KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, RightTouch logo, REAL ICE, SQL, Serial Quad I/O, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.

GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries.

All other trademarks mentioned herein are property of their respective companies.

© 2006-2015, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.

ISBN: 978-1-63277-994-6

QUALITY MANAGEMENT SYSTEM

CERTIFIED BY DNV

= ISO/TS 16949=

Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company's quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELoo® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified.

Table of Contents

Chapter 1. PEP and Debug Header Overview

1.1 What is a Processor Extension Pak (PEP)? 5
1.2 What is a Debug Header? 5
1.3 Why Do I Need a Header to Debug? 6
1.4 Debug Details 7
1.5 Compare Debug Header and Device Features 9
1.6 Support Information .... 10
1.7 Debug Header Hardware Setup 11
1.8 Debug Header Setup for MPLAB X IDE 13
1.9 Additional Information .... 14

Chapter 2. Required Debug Headers

Introduction.... 15
AC162050, AC162058 16
AC162052, AC162055, AC162056, AC162057 18
AC162053, AC162054 20
AC162059, AC162070, AC162096 22
AC162060 24
AC162061 26
AC162066 28
AC162083 30
AC244023, AC244024 32
AC244028 34
AC244045 36
AC244051, AC244052, AC244061 38
AC244062 40

Chapter 3. Optional Debug Headers

Introduction......43
AC162062, AC162079, AC162087, AC162091 48
AC162064 50
AC162065, AC244022 52
AC162067, AC162074 55
AC162078 58
AC162088, AC162094 61

AC244026, AC244027 64

AC244033, AC244034 67

AC244035, AC244036 69

AC244043, AC244044 71

AC244046, AC244047 73

AC244048 75

AC244049, AC244050 77

AC244053, AC244054 79

AC244060 81

Appendix A. Debug Header Target Footprints

A.1 Introduction 83

A.2 DIP Device Footprints 83

A.3 TQFP/PLCC Device Footprints 83

Appendix B. Debug Header Connections

B.1 Introduction 87

B.2 6-Pin Modular Connector 87

B.3 8-Pin SIL Connector 88

B.4 6-Pin SIL Connector 89

B.5 SIL Optional Connection 90

B.6 Modular-to-SIL Adapter 90

B.7 Ordering Information 91

Appendix C: Revision History ......93

Index 95

Worldwide Sales and Service 98

Chapter 1. PEP and Debug Header Overview

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available.

Documents are identified with a "DS" number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is "DSXXXXXA", where "XXXXX" is the document number and "A" is the revision level of the document.

For the most up-to-date information on development tools, see the MPLAB X IDE online Help (Help menu).

This chapter contains the following:

• What is a Processor Extension Pak (PEP)?
• What is a Debug Header?
• Why Do I Need a Header to Debug?
- Debug Details
- Compare Debug Header and Device Features
- Support Information
- Debug Header Hardware Setup
- Debug Header Setup for MPLAB X IDE
• Additional Information

1.1 WHAT IS A PROCESSOR EXTENSION PAK (PEP)?

A Processor Extension Pak contains a debug header, adapter board, and stand-offs. A PEP is what you purchase when you want a debug header.

1.2 WHAT IS A DEBUG HEADER?

A debug header is a circuit board that allows an emulator or debugger to debug code for a specific device. A special version of the device (-ICE/-ICD) with on-board debug circuitry is located on the header. Connectors on the side of the header allow it to connect directly or through an adapter to the debug tool. Connectors on the bottom of the header allow it to connect directly or through a transition socket to a target board.

1.3 WHY DO I NEED A HEADER TO DEBUG?

Some PIC ^® microcontrollers (MCUs), particularly low-pin-count devices (with 20 pins or less), generally must use a header for debugging. This is done to free up I/O lines for your application and to make production parts more affordable. Optional headers are also available for high-pin-count devices (with 64 pins or higher).

Debugging requires a two-line connection (plus V_DD, Vss and VPP) to communicate with the device. In a high-pin-count device, losing a few I/O lines is generally not a problem for most designs. But in a low-pin-count device, it can be a critical problem. Imagine having to do an 8-pin design where there are only 5 I/Os, having used up 2 I/Os just for debugging!

Headers are also used to save you money. In high-pin-count devices, adding debugging to the silicon can generally be done at little or no cost since the silicon is already fairly large. However, low-pin-count devices are low cost specifically because they use very little silicon. So, adding debugging circuitry on-board these parts would add significant cost since it would raise the amount of silicon used by a considerable percentage. The header places the cost for debugging up front and frees your production parts from the extra cost of an unused debug module.

Microchip also makes optional debug modules, usually for high-pin-count devices. The module is optional because you can still do basic debugging without a header, but if you use one, you get back I/O lines, and may also gain additional debugging features. Only certain devices can use an optional header, so see Chapter 3. "Optional Debug Headers".

Microchip lists what header must be ordered to work with your device, if one is required. Simply consult Chapter 2. "Required Debug Headers".

Note that in all cases, devices can be programmed "in circuit" (called ICSP™) with very few exceptions. Even devices without an internal debug feature can still be programmed by connecting the programming/debugging tool to the in-circuit programming lines. These devices simply cannot perform debugging without a header.

FIGURE 1-1: PRODUCTION DEVICE VS. HEADER DEVICE

1.4 DEBUG DETAILS

Next generation in-circuit emulators (such as the MPLAB ^® REAL ICE ^™ in-circuit emulator) and in-circuit debuggers work with devices that have on-chip debug circuitry. Sometimes the actual production device will have this circuitry and sometimes a special version of this device is required or available for code debugging. This special version of the chip, with the suffix -ICE or -ICD, is mounted on a debug header (Figure 1-2).

Note: -ICE/-ICD devices are only used on the debug header; they are not sold separately.

FIGURE 1-2: DEBUG OPTIONS

graph TD
    A["Production Device without On-Board Debug Circuitry"] --> B["No debug capability. Header required for debug."]
    C["Production Device On-Board Debug Circuitry"] --> D["Debug capability available. However, header can provide dedicated resources for debug."]
    E["-ICE/-ICD Device with On-board Debug Circuitry, Dedicated Debug Pins and (sometimes) Dedicated Debug Memory"] --> B
    F["Debug Header with additional circuitry to support debug functions."] --> G["-ICE/-ICD Device"]
    H["Debug Memory"] --> E
    I["Debug Circuitry"] --> E
    J["Vdd"] --> E
    K["MCLR/Vpp"] --> E
    L["Vss"] --> E
    M["DAT"] --> E
    N["CLK"] --> E
    O["Rx1"] --> E
    P["Rx0"] --> E
    Q["J1"] --> G
    R["S1"] --> G
    S["TP1"] --> G
    T["TP2"] --> G
    U["TP3"] --> G

To determine which device resources must be dedicated to debugging for either a device with on-board debug capability or the special -ICE/-ICD device, see the "Resources used by ..." section of the in-circuit emulator or in-circuit debugger online Help file.

Then, depending on the debug tool, different features of the special -ICE/-ICD device may be available. A summary is provided below. To determine actual features, see the debug header documentation for a specific device.

TABLE 1-1: DEVICE FEATURES SUMMARY

Debug Tool -ICE -ICD
In-Circuit Emulators Basic Emulator Functions Basic Debug Functions
In-Circuit Debuggers Basic Debug Functions

1.5 COMPARE DEBUG HEADER AND DEVICE FEATURES

For some devices that have on-board debug capability, the optional header provides more debug features than the device itself. To determine if your device and optional header differ in their debug features, go to the Development Tool Selector (DTS) to look for your device:

1. In a web browser, go to: http://www.microchip.com/dtsapp/
2. Select your device from the "Select Product" list. Or, type the name of your device into the "Search" box and click Search. The name will appear at the top of the "Select Product" list, where you can select it.
3. Click on the tab "Emulators & Debuggers" to see debug features.

FIGURE 1-3: DTS DEVICE INFORMATION

MICROCHIP Development Tool Selector - PIC16F1939 Select Product PIC16F1030 PIC16F1046 PIC16F1047 PIC16F505 PIC16F506 PIC16F526 PIC16F527 PIC16F54 PIC16F57 PIC16F570 PIC16F59 PIC16F610 PIC16F616 PIC16F627 PIC16F627A PIC16F628 PIC16F620A PIC16F630 PIC16F631 PIC16F630 PIC16F639 PIC16F648A PIC16F670 PIC16F677 PIC16F684 PIC16F685 PIC16F687 PIC16F688 PIC16F689 PIC16F690 PIC16F707 PIC16F716 PIC16F72 PIC16F720 PIC16F721 PIC16F722 PIC16F722A PIC16F723 PIC16F723A PIC16F724 PIC16F726 PIC16F727 PIC16F73 PIC16F737 PIC16F74 PIC16F747 PIC16F753 PIC16F758 Demo & Eval Boards Emulators & Debuggers Programmers Pickit 3 In-Circuit Debugger (PG164130) Header: AC244035 (Optional) Debug Features: Stop watch True Debug Features: Break on stack overflow True Stop watch:True Pgm-memory HW breakpoints:3 Begin memory HW breakpoints:3 Data-memory breakpoints:3 Data-memory breakpoints:3 WDT overflow:True Data-memory breakpoints:3 Pass counter:True Pass counter:True MPLAB ICD 3 In-Circuit Debugger (DV104035) Header: AC244035 (Optional) Debug Features: WDT overflow:True Debug Features: Data-memory breakpoints:3 Begin memory breakpoints:3 Pgm-memory HW breakpoints:Unlimited Begin memory breakpoints:Unlimited Pass counter:True Pass counter:True Break on stack overflow:True Begin memory breakpoints:True Stop watch:True Begin memory breakpoints:True Pgm-memory HW breakpoints:3 Begin memory HW breakpoints:3 MPLAB REAL ICE PROBE KIT (DV244005) Header: AC244035 (Optional) Debug Features: Pgm-memory HW breakpoints:3 Begin memory HW breakpoints:3 Break on stack overflow:True Begin memory breakpoints:3 WDT overflow:True Begin memory breakpoints:3 Stop watch:True Begin memory breakpoints:3 Data-memory breakpoints:3 Begin memory breakpoints:3 Data capture Enabled Begin memory breakpoints:Unlimited Pgm-memory HW breakpoints:Unlimited Begin memory breakpoints:Unlimited Pass counter:True Pass counter:True MPLAB ICD 2 MODULE (DV164005) Header: AC244035 (Optional)

1.6 SUPPORT INFORMATION

Debug headers require specific debug tools to operate with MPLAB X IDE. Acquire these before purchasing a debug header in a Processor Extension Pak (PEP). Available PEPs are listed in Chapter 2. "Required Debug Headers" and Chapter 3. "Optional Debug Headers".

To continue setting up emulation header hardware, see Section 1.7 "Debug Header Hardware Setup".

Contact Customer Support for issues with emulation headers.

1.6.1 Tools Support

Debug headers are supported on the following tools:

• PICkit™ 3 in-circuit debugger
• MPLAB ^® ICD 3 in-circuit debugger
• MPLAB ^® REAL ICE ^® in-circuit emulator

1.6.2 Customer Support

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative
- Local Sales Office
• Field Application Engineer (FAE)
- Technical Support

Technical support is available through the web site at: http://support.microchip.com

Documentation errors or comments may be sent to: [e-mail].

1.7 DEBUG HEADER HARDWARE SETUP

To set up your header, perform the following steps:

1. Check the debug header for any stickers and the header box for any paper inserts that may specify special operating instructions (Figure 1-4). Follow these instructions before doing anything else.

FIGURE 1-4: SPECIAL HEADER INSTRUCTIONS

CAUTION

Debug Header (Top) CAUTION

1. Set any jumpers or switches on the header to determine device functionality or selection, as specified for that header. See the sections "Optional Debug Headers" or "Required Debug Headers" for information on how to set up individual headers.

2. Connect the header to your desired debug tool by consulting the tool documentation for connection options. An example connection is shown in Figure 1-5.

The special -ICE/-ICD device is mounted on the top of a header and its signals are routed to the emulator or debugger connector. These special device versions are labeled with the appropriate suffix (e.g., Device-ICE).

FIGURE 1-5: CONNECT HEADER TO DEBUG TOOL

graph LR
    A["To PC and MPLAB® IDE"] --> B["Debug Tool Module (Top)"]
    B --> C["Device-ICE"]
    B --> D["Debug Header (Top)"]

1. Connect the header to the target board. On the bottom of the header is a socket that is used to connect to the target board. The header can be connected to the target board as follows:

a) PDIP header socket to PDIP target socket with a stand-off (male-to-male) connector

b) Header socket to plug on the target board

c) Header socket to target socket with a transition socket (see the Transition Socket Specification, DS51194)

An example connection is shown in Figure 1-6.

The header socket will have the same pin count as your selected device. The -ICE/-ICD device on the top of the header usually has a larger pin count because it has additional pins that are dedicated to debug.

FIGURE 1-6: CONNECT HEADER TO TARGET

graph TD
    A["Debug Header (Bottom)"] --> B["Header Socket"]
    B --> C["Stand-off Connector"]
    C --> D["Target Board (Top)"]
    D --> E["Power In"]
    E --> F["Target Socket"]
    F --> G["Output Grid"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#ffc,stroke:#333
    style F fill:#cfc,stroke:#333
    style G fill:#fff,stroke:#333

1. If using a debug tool that can power the target, power that tool now.
2. Power the target, if needed.

1.8 DEBUG HEADER SETUP FOR MPLAB X IDE

Follow these instructions to use the debug header:

1. Set up the debug header as specified in Section 1.7 "Debug Header Hardware Setup".
2. Begin creating a project for a device supported by your debug header using the Projects wizard (File>New Project). See MPLAB X IDE documentation for more on Projects.
3. In one step of the wizard you will have an opportunity to specify the debug header product number (AC#######).
4. In another step you will specify the hardware (debug) tool to which your header is attached.
5. Once the wizard is complete, write code for your project.
6. Select Debug>Debug Project to run and debug your code.

Note: A debug header can only be used to debug (Debug menu), not to program (Run menu). See Section 1.9.1 "Programming Details".

1.9 ADDITIONAL INFORMATION

The following additional information is useful when using a Debug Header from a Processor Extension Pak.

1.9.1 Programming Details

The debug header is designed to be used with the in-circuit emulator or the in-circuit debugger selected as a debugger, not a programmer, in MPLAB X IDE. Any programming of the special -ICE/-ICD device on the header is for debug purposes and includes the debug executive. See your related debug tool documentation for details on using it as a debugger.

To program production (non-special) devices with your debug tool, use the Universal Programming Module (AC162049) or design a modular interface connector on the target. See the appropriate specification for connections. For the most up-to-date device programming specifications, see the Microchip website (www.microchip.com).

Also, production devices may be programmed with the following tools:

• MPLAB PM3 device programmer
  • PICkit 3 development programmer
• MPLAB ICD 3 in-circuit debugger (select as a programmer)
• MPLAB REAL ICE in-circuit emulator (select as a programmer)

1.9.2 Calibration Bits

The calibration bits for the band gap and internal oscillator are always preserved to their factory settings.

1.9.3 Performance Issues

PIC MCUs do not support partial program memory erase. Therefore, users may experience slower performance than with other devices.

Also, see either the in-circuit emulator or the in-circuit debugger Help file for information on specific device limitations that may affect performance.

Chapter 2. Required Debug Headers

INTRODUCTION

Some devices have no built-in debug circuitry. Therefore, special -ICE/-ICD versions of these devices are required for debug tool operation.

Currently available debug headers and their associated -ICE/-ICD devices are shown below, sorted by supported device.

TABLE 1: REQUIRED DEBUG HEADERS BY DEVICE

Device Supported by Debug Header	Pin Count	PEP* Part Number	-ICE/-ICD Device on Debug Header	VDD Max
PIC10F200/2/4/6 8/14	AC162059	PIC16F505-ICD	5.5V
PIC10F220/2 8/14	AC162070 PIC	16F506-ICD 5.5V
PIC10F320/322 6/8	AC244045 PIC	10F320-ICE 5.5V
PIC10LF320/322 6/8	AC244045 PIC	10F320-ICE 3.6V
PIC12F508/509 8/14	AC162059 PIC	16F505-ICD 5.5V
PIC12F510	8/14	AC162070	PIC16F506-ICD	5.5V
PIC12F519	8/14	AC162096	PIC16F526-ICD	5.5V
PIC12F609/HV609	28	AC162083	PIC16F616-ICD	5.5V
PIC12F615/HV615	28	AC162083	PIC16F616-ICD	5.5V
PIC12F617	28	AC162083	PIC16F616-ICD	5.5V
PIC12F629	8	AC162050	PIC12F675-ICD	5.5V
PIC12F635	14	AC162057	PIC16F636-ICD	5.5V
PIC12F675	8	AC162050	PIC12F675-ICD	5.5V
PIC12F683	8	AC162058	PIC12F683-ICD	5.5V
PIC12F1501^(1)	8	AC244051	PIC16F1509-ICE	5.5V
PIC12LF1501^(1)	8	AC244052	PIC16LF1509-ICE	3.6V
PIC16F505	8/14	AC162059	PIC16F505-ICD	5.5V
PIC16F506	8/14	AC162070	PIC16F506-ICD	5.5V
PIC16F526	8/14	AC162096	PIC16F526-ICD	5.5V
PIC16F527	20	AC244061	PIC16F527-ICD	5.5V
PIC16F570	28	AC244062	PIC16F570-ICD	5.5V
PIC16F610/HV610	14/16	AC162083	PIC16F616-ICD	5.5V
PIC16F616/HV616	14/16	AC162083	PIC16F616-ICD	5.5V
PIC16F627A/628A	18	AC162053	PIC16F648A-ICD	5.5V
PIC16F630	14	AC162052	PIC16F676-ICD	5.5V
PIC16F631	20	AC162061	PIC16F690-ICD	5.5V
PIC16F636	14	AC162057	PIC16F636-ICD	5.5V
PIC16F639^(3)	20	AC162066	PIC16F636-ICD	5.5V

* PEP = Processor Extension Pak.
Note 1: Header optional for other devices, but required for this device.
Note 2: VDDCORE Max
Note 3: Dual die

TABLE 1: REQUIRED DEBUG HEADERS BY DEVICE (CON'T)

Device Supported by Debug Header	Pin Count	PEP* Part Number	-ICE/-ICD Device on Debug Header	VDD Max
PIC16F648A 18 AC162053 PIC16F648A-ICD 5.5V
PIC16F676 14 AC162052 PIC16F676-ICD 5.5V
PIC16F677 20 AC162061 PIC16F690-ICD 5.5V
PIC16F684 14 AC162055 PIC16F684-ICD 5.5V
PIC16F685/687 20 AC162061 PIC16F690-ICD 5.5V
PIC16F688 14 AC162056 PIC16F688-ICD 5.5V
PIC16F689/690 20 AC162061 PIC16F690-ICD 5.5V
PIC16F716 18 AC162054 PIC16F716-ICD 5.5V
PIC16F785/HV785 20 AC162060 PIC16F785-ICD 5.5V
PIC16F1503^(1)	14	AC244051 PIC16F1509-ICE 5.5V
PIC16F1507^(1)	20
PIC16LF1503^(1)	14	AC244052 PIC16LF1509-ICE 3.6V
PIC16LF1507^(1)	20
PIC18F13K50	20 AC244023 PIC18F14K50-ICE 5.5V
PIC18F14K50
PIC18LF13K50	20 AC244024 PIC18LF14K50-ICE 3.6V,			2.75V^(2)
PIC18LF14K50
PIC24F04KA200^(1)	14	AC244028 PIC24F16KA102-ICE		3.6V
PIC24F04KA201^(1)	20

* PEP = Processor Extension Pak.
Note 1: Header optional for other devices, but required for this device.
Note 2: VDDCORE Max
Note 3: Dual die

AC162050, AC162058

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting various -ICE/-ICD devices. To identify these headers, use the following information.

AC Number	-ICE/-ICD Device	Board Assembly Number
AC162050 PIC1	2F675-ICD 02-01	1662
AC162058 PIC1	2F683-ICD

Header Setup and Operation

For these headers, device peripherals need to be selected by setting jumper J1 to the appropriate position. For AC162050, this will have the effect of selecting the device.

AC Number	Jumper J1	Function	Device Selected
AC162050	2-3	A/D Disabled	PIC12F629
	1-2	A/D Enabled	PIC12F675
AC162058	1-2	A/D Enabled	PIC12F683

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-1: DIMENSIONS - AC162050, AC162058

1.275 0.700 8-Pin MPLAB ICD 2 Reacher ASSIDEBLY NO. 62-01682 Microtika Technology Inc. ©2002 1.000 Top 0.525 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. Target Pin 1 is located on bottom side of header.

0.560 Typical -ICE Device 0.165 Typical Side 0.062 Typical

Dimensions are in inches

AC162052, AC162055, AC162056, AC162057

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting various -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162052 PIC16F676-ICD 02-01686
AC162055 PIC16F684-ICD
AC162056 PIC16F688-ICD
AC162057 PIC16F636-ICD

Header Setup and Operation

For these headers, device peripherals need to be selected by setting jumper J1 to the appropriate position. For AC162052 and AC162057, this will have the effect of selecting the device.

AC Number Jumper J1 Function Device Selected
AC162052 2-3	A/D Disabled PIC16F630
	1-2 A/D Enabled PIC16F676
AC162055	Don't care	N/A	PIC16F684
AC162056	Don't care	N/A	PIC16F688
AC162057 2-3	PORTC, Comparator 2 Disabled PIC12F635
	1-2 PORTC, Comparator 2 Enabled PIC16F636

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-2: DIMENSIONS - AC162052, AC162055, AC162056, AC162057

1.275 0.700 M-Pin MPLAB CD 2 Header ASSEMBLY NO. 83-81658 Microchip Technology Inc. ZEN2 1.300 0.825 Top 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. Target Pin 1 is located on bottom side of header.

-ICE Device 0.165 Typical 0.560 Typical 0.062 Typical Side

Dimensions are in inches

AC162053, AC162054

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162053 PIC16F648A-ICD 02-01695
AC162054 PIC16F716-ICD

Header Setup and Operation - AC162053

For these headers, there are no jumpers/switches. The device with the most program memory is always selected.

If PIC16F627A or PIC16F628A devices are selected for development in MPLAB X IDE, the warning "Invalid target device ID" may be received in the build window. Ignore this warning. The reason for the warning is that the PIC16F648A-ICD device supports PIC16F648A, PIC16F627A and PIC16F628A, but only reports the device ID for the PIC16F648A.

Header Setup and Operation - AC162054

This header supports one device (PIC16F716) so there are no jumpers or switches.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-3: DIMENSIONS - AC162053, AC162054

Target Pin 1 is located on bottom side of header. 0.150 0.150 0.750 18-Pin MPUAB ICD 2 Header - Performance Technology Inc. 0.049 ASSEMBLY NO. 82-8165F 2.350 Top 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. -ICE Device 0.165 Typical 0.560 Typical 0.062 Typical Side Dimensions are in inches

AC162059, AC162070, AC162096

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162059 PIC1	6F505-ICD 02-01803
AC162070 PIC1	6F506-ICD
AC162096 PIC1	6F526-ICD

Header Setup and Operation

The -ICD devices on these headers are specifically designed to select a device without the use of additional jumpers or switches.

These headers support 8- and 14-pin devices (see Figure 2-4.) For the AC162059 and AC162070, there is an 8-pin and a 14-pin connector. For the AC162096, there is only a 14-pin connector. (The 8-pin connector is not populated.) Use the 14-pin connector for 8-pin devices, but make sure device pin 1 is placed at the 14-pin connector pin 1.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-4: DIMENSIONS - AC162059, AC162070, AC162096

14-Pin Target Pin is located on bottom side of header. 8-Pin Target Pin 1 is located on bottom side of header. 0.450 0.225 0.750 ASSEMBLY NO.: 02-01863 J MicroChip Technology Inc. ©2005 1.200 2.250 Top 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. -ICE Device 0.165 Typical 0.560 Typical 0.062 Typical Side Dimensions are in inches

AC162060

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162060 PIC16F785-ICD 02-01820

Header Setup and Operation

For the PIC16F785 20-pin header, connect the jumper J2 to enable the shunt regulator.

Device Device Type Jumper		J2 Function
PIC16F785 F 1-2	Disable shunt regulator
PIC16HV785	HV	2-3 Enable shunt regulator

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-5: DIMENSIONS - AC162060

Target Pin 1 is located on bottom side of header. 0.225 0.325 J1 ASSEMBLY NO.: 02-1828 ©2004 U2 Microchip Technology Inc. U1 0.750 2.250 Top 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. -ICE Device 0.165 Typical Typical 0.560 Side 0.062 Typical Dimensions are in inches

AC162061

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162061 PIC16F690-ICD 02-01835

Header Setup and Operation

For the PIC16F690 20-pin header, you will need to set the S1 switches (Figure 2-6) to enable peripherals and choose devices (Table 2).

FIGURE 2-6: S1 SWITCH HARDWARE

ON DIP 1 2 3 4 5 ECCP SSP USART 4KPFM ADC S1 ENABLE

Switch configuration at left shows all peripherals disabled, which is the setting to select the PIC16F631 device.

TABLE 2: S1 SWITCH DEVICE SELECTION

Device	Switches
	1ECCP	2SSP	3USART	44k PFM	5ADC
PIC16F631	0	0	0	0*	0
PIC16F677	0	1	0	0**	1
PIC16F685 1	0		0		1
PIC16F687	0	1	1	0**	1
PIC16F689 0	1		1		1
PIC16F690 1	1		1		1

Legend: 1 = Enabled 0 = Disabled * = 1k PFM ** = 2k PFM

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-7: DIMENSIONS - AC162061

1.650 0.625 1.450 0.475 ENABLE -ICE Device Top ASSEMBLY NO.: 82-1835 Microchip Technology Inc. ©2005 Target Pin 1 is located on bottom side of header.

6-pin Modular Connector See Appendix B. "Debug Header Connections" for details.

0.560 Typical 0.165 Typical 0.062 Typical Side

Dimensions are in inches

AC162066

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162066 PIC16F636-ICD 02-01832

Header Setup and Operation

For the PIC16F639 20-pin header, connect the jumper J3 as specified below.

Tool Jumper J3 Function
N/A	1-2	Run/program as production device
In-circuit debuggers,next generation in-circuit emulators	2-3 Run/program as debug device

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-8: DIMENSIONS - AC162066

6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. Target Pin 1 is located on bottom side of header. ASSEMBLY NO.: 82-1832 Microchip Technology Inc. © 2005 J3 J2 0.850 0.275 J1 EMULATOR 0.950 2.325 Top

0.560 Typical -ICE Device 0.165 Typical 0.062 Typical Side

Dimensions are in inches

AC162083

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162083 PIC16F616-ICD 02-01976

Header Setup and Operation

CAUTION

Header damage.

Incorrect rotary switch (Figure 2-9) settings can irreparably damage the header. Ensure rotary switch settings are correct (Table 3) before powering or connecting the header. Do not change the rotary switch setting while the header is powered or connected to a debug tool. Do not power shunt regulator (HV) devices from the debug tool.

Test points are available on this header to check the following: Ground (TP1), VDD (TP2), ICD Clock (TP3), ICD Data (TP4) and ICD MCLR/VPP (TP5).

TABLE 3: ROTARY SWITCH SETTINGS

Switch Position Device Switch Position Device
0 PIC12HV6	09 8 PIC12F609
1 PIC12HV6	15 9 PIC12F615
2 Reserved	HV	A PIC12F617
3	PIC16HV610	B	PIC16F610
4 PIC16HV6	16	C PIC16F616
5 Reserved	HV	D Reserved F
6 Reserved	HV	E Reserved F
7 Reserved	HV	F Reserved F

Also, see the AC162083 Insert (DS51693).

POTENTIAL ISSUES

HV device selected instead of F device

If you inadvertently select a shunt regulator (HV) device and attempt to use it in a target board designed for a non-shunt regulator (F) device, the shunt may draw excessive current due to the lack of current-limiting circuitry on the target board and damage the device mounted on the header.

F device selected instead of HV device

If you inadvertently select a non-shunt regulator (F) device and attempt to use it in a target board designed for a shunt regulator (HV) device, the device may draw excessive current due to the higher voltage used on a target board designed for HV devices and damage the device mounted on the header.

HV devices cannot be powered from debug tool

Do not select in MPLAB X IDE to power the target (debug header) from the debug tool (if it supports powering the target) when using shunt regulator (HV) devices since this will also cause the shunt to draw excessive current.

DETERMINING DAMAGE

A damaged header will cause MPLAB X IDE to report a device ID of 0. However, there are other issues that can cause the device ID to report as 0. Consult your debug tool documentation on troubleshooting to identify the problem. If you believe you have a damaged header, contact Microchip technical support at http://support.microchip.com.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-9: DIMENSIONS - AC162083

6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. Rotary Switch 0.600 0.650 1.600 Target Pin 1 is located on bottom side of header. Use for both 14- and 8-pin device alignment. ASSEMBLY NO.: 02-01976 Microchip Technology Inc. ©2007 2.450 Top

0.560 Typical -ICE Device 0.165 Typical 0.062 Typical Side

Dimensions are in inches

AC244023, AC244024

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244023 PIC18F14K50-ICE 02-02031
AC244024 PIC18LF14K50-ICE

Header Setup and Operation

For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-10: DIMENSIONS - AC244023, AC224024

Target Pin 1 is located on bottom side of header. 8-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. Assembly No.: 02-02031 0.150 1.150 0.425 1.800 Top -ICE Device 0.165 Typical 0.062 0.260 Typical Typical Side Dimensions are in inches

AC244028

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244028 PIC24F16KA102-ICE	02-02107

Header Setup and Operation

For this header, set up jumpers J2 and J3 as specified below.

Jumper Setting Function
J2 Open	Disable weak ICE/MCLR	pull-up resistor
	Short Enable	weak ICE/MCLR pull-up resistor
J3 Open	Disable power LED indicator
	Short Enable	power LED indicator

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-11: DIMENSIONS - AC244028

14-Pin Target Pin 1 is located on bottom side of header. 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. 1.945 1.400 0.855 20-Pin Target Pin 1 is located on bottom side of header. 28-Pin Target Pin 1 is located on bottom side of header. -ICE Device Assembly No.: 02-02107 2.370 Top Optional SPI trace 2-Pin right angle header to be installed here. (Digi-Key P/N A32702-02-ND) 0.380 Typical 0.165 Typical Side 0.062 Typical 0.165 Typical Dimensions are in inches

AC244045

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244045 PIC10F320-ICE	02-02255

Header Setup and Operation

Because the -ICE chip is based on the PIC10F320 device, the ICE device memory will be greater than the actual chip for the PIC10F322 device.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-12: DIMENSIONS - AC244045

Target Pin 1 is located on bottom side of header. 0.300 Microchip Technolo Inc. 2811 0.350 1.150 Assembly No.: 02-02255 0.540 1.800 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. 0.410 Typical -ICE Device 0.062 Typical 0.165 Typical0.165 Typical Dimensions are in inches

AC244051, AC244052, AC244061

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244051 PIC16F1509-ICE	02-02208
AC244052 PIC16LF1509-ICE
AC244061 PIC16F527-ICD

Header Setup and Operation

For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

These headers support 8-, 14- and 20-pin devices. For 8- and 14-pin devices, make sure device pin 1 is placed at the 20-pin connector pin 1.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-13: DIMENSIONS - AC244051, AC244052, AC244061

Target Pin 1 is located on bottom side of header. -ICE/-ICD Device 0.570 0.270 1.640 8-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. Assembly No.: 02-02208 0.620 1.930 Top -ICE/-ICD Device Side 0.062 Typical 0.260 Typical 0.165 Typical Dimensions are in inches

AC244062

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244062 PIC16F570-ICD	02-10229

Header Setup and Operation

For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 2-14: DIMENSIONS - AC244062

Target Pin 1 is located on bottom side of header. -ICD Device 0.275 0.203 0.150 1.600 J2 D1 R1 C1 C2 Assembly No.: 02-10229 6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. MOU1 D2 Top 1.800 -ICD Device 0.410 Typical 0.110 Typical Side 0.062 Typical Board Thickness 0.165 Typical Dimensions are in inches

NOTES:

Chapter 3. Optional Debug Headers

INTRODUCTION

Devices that have built-in debug circuitry do not require a header to use debug tools. However, some pins and memory must be used to support the debug function. Special -ICE/-ICD versions offering additional pins, memory and emulator functions can be used to provide superior emulating/debugging capabilities.

Currently available debug headers and their associated -ICE/-ICD devices are shown below, sorted by supported device.

TABLE 1: OPTIONAL DEBUG HEADERS - PIC12/16 DEVICES

Device Supported by Debug Header	Pin Count	PEP* Part Number	-ICE/-ICD Device on Debug Header	VDD Max
PIC12F752 8 AC244049	PIC12F752-ICE 5.5V
PIC12HV752	8 AC244050		PIC12HV752-ICE	5.5V
PIC16F722	28	AC244026	PIC16F727-ICE	5.5V
PIC16F723	28
PIC16F724	40/44
PIC16F726	28
PIC16F727	40/44
PIC16LF722	28	AC244027 PIC16LF727-ICE 3.6V
PIC16LF723	28
PIC16LF724	40/44
PIC16LF726	28
PIC16LF727	40/44
PIC16F753	14/16	AC244060 PIC16F753-ICE 5.5V
PIC16HV753	14/16
PIC16F1454	14/16	AC244053	PIC16F1459-ICE	5.5V
PIC16F1455	14/16
PIC16F1458	20
PIC16F1459	20
PIC16LF1454	14/16	AC244054	PIC16LF1459-ICE	3.6V
PIC16LF1455	14/16
PIC16LF1458	20
PIC16LF1459	20
PIC16F1508^(1)	20 AC244051		PIC16F1509-ICE	5.5V
PIC16F1509^(1)
PIC16LF1508^(1)	20 AC244052		PIC16LF1509-ICE	3.6V
PIC16LF1509^(1)

* PEP = Processor Extension Pak.
Note 1: Header required for other devices, but optional for this device.
Note 2: V DDCORE Max

TABLE 1: OPTIONAL DEBUG HEADERS - PIC12/16 DEVICES (CON'T)

Device Supported by Debug Header	Pin Count	PEP* Part Number	-ICE/-ICD Device on Debug Header	V_DD Max
PIC12F1822	8	AC244043	PIC16F1829-ICE 5.5V
PIC12F1840	8
PIC16F1823	14/16
PIC16F1824	14/16
PIC16F1825	14/16
PIC16F1829	20
PIC12LF1822	8	AC244044 PIC16LF1829-ICE 3.6V
PIC12LF1840	8
PIC16LF1823	14/16
PIC16LF1824	14/16
PIC16LF1825	14/16
PIC16LF1829	20
PIC16F1826	18/20/28	AC244046 PIC16F1847-ICE 5.5V
PIC16F1827
PIC16F1847
PIC16LF1826	18/20/28	AC244047 PIC16LF1847-ICE 3.6V
PIC16LF1827
PIC16LF1847
PIC16LF1902	28	AC224048 PIC16LF1907-ICE 3.6V
PIC16LF1903	28
PIC16LF1904	40/44
PIC16LF1906	28
PIC16LF1907	40/44
PIC16F1933	28	AC244035 PIC16F1939-ICE 5.5V
PIC16F1934	40/44
PIC16F1936	28
PIC16F1937	40/44
PIC16F1938	28
PIC16F1939	40/44
PIC16LF1933	28	AC244036 PIC16LF1939-ICE 3.6V,		2.75V^(2)
PIC16LF1934	40/44
PIC16LF1936	28
PIC16LF1937	40/44
PIC16LF1938	28
PIC16LF1939	40/44

* PEP = Processor Extension Pak.
Note 1: Header required for other devices, but optional for this device.
Note 2: V DDCORE Max

TABLE 2: OPTIONAL DEBUG HEADERS - PIC18 DEVICE

Device Supported by Debug Header	Pin Count	PEP* Part Number	-ICE/-ICD Device on Debug Header	VDD Max
PIC18F1230/1330 28	AC162078	PIC18F1330-ICD	5.5V
PIC18F13K22	20 AC	244033 PIC18F	14K22-ICE 5.5V
PIC18F14K22
PIC18LF13K22	20 AC	244034	PIC18LF14K22-ICE	3.6V 2.75V^(2)
PIC18LF14K22
PIC18F24J10	28 AC	162067 PIC18F	45J10-ICE 3.6V
PIC18F25J10
PIC18LF24J10				3.6V 2.75V^(2)
PIC18LF25J10
PIC18F44J10	40 3.6V
PIC18F45J10
PIC18LF44J10				3.6V 2.75V^(2)
PIC18LF45J10
PIC18F44J10	44 AC	162074 PIC18F	45J10-ICE 3.6V
PIC18F45J10
PIC18LF44J10				3.6V 2.75V^(2)
PIC18LF45J10
PIC18F63J11	64 AC	162079 PIC18F	85J90-ICE 3.6V
PIC18F63J90
PIC18F64J11
PIC18F64J16
PIC18F64J90
PIC18F64J95
PIC18F65J11
PIC18F65J90
PIC18F83J11	80
PIC18F83J90
PIC18F84J11
PIC18F84J16
PIC18F84J90
PIC18F84J95
PIC18F85J11
PIC18F85J90
PIC18F65J10	64 AC	162062 PIC18F	87J10-ICE 3.6V
PIC18F65J15
PIC18F66J10
PIC18F66J15
PIC18F67J10
PIC18F85J10	80
PIC18F85J15
PIC18F86J10
PIC18F86J15
PIC18F87J10

* PEP = Processor Extension Pak.
Note 1: Header required for other devices, but optional for this device.
Note 2: V DDCORE Max

TABLE 2: OPTIONAL DEBUG HEADERS - PIC18 DEVICE (CON'T)

Device Supported by Debug Header	Pin Count	PEP* Part Number	-ICE/-ICD Device on Debug Header	VDD Max
PIC18F65J16	64 AC	162091 PIC18F87	7J11-ICE 3.6V
PIC18F66J11
PIC18F66J16
PIC18F67J11
PIC18F85J16	80
PIC18F86J11
PIC18F86J16
PIC18F87J11
PIC18F65J50	64 AC	162087	PIC18F87J50-ICE	3.6V
PIC18F65J55
PIC18F66J50
PIC18F66J55
PIC18F67J50
PIC18F85J50	80
PIC18F85J55
PIC18F86J50
PIC18F86J55
PIC18F87J50
PIC18F66J60	64 AC	162064 PIC18F97	7J60-ICE 3.6V
PIC18F66J65
PIC18F67J60
PIC18F86J60	80
PIC18F86J65
PIC18F87J60
PIC18F96J60	100
PIC18F96J65
PIC18F97J60

* PEP = Processor Extension Pak.
Note 1: Header required for other devices, but optional for this device.
Note 2: VDDCORE Max

TABLE 3: OPTIONAL DEBUG HEADERS - PIC24 DEVICE

Device Supported by Debug Header	Pin Count	PEP* Part Number	-ICE/-ICD Device on Debug Header	VDD Max
PIC24F08KA101^(1)	20	AC244028	PIC24F16KA102-ICE 3.6V
PIC24F08KA102^(1)	20/28
PIC24F16KA101^(1)	20
PIC24F16KA102^(1)	20/28
PIC24FJ16GA002	28 AC	162088	PIC24FJ64GA004-ICE 3.6V
PIC24FJ32GA002
PIC24FJ48GA002
PIC24FJ64GA002
PIC24FJ16GA004	44 AC	162094
PIC24FJ32GA004
PIC24FJ48GA004
PIC24FJ64GA004
PIC24FJ64GA006	64	AC162065 or AC244022	PIC24FJ128GA010-ICE 3.6V
PIC24FJ64GA008	80
PIC24FJ64GA010	100
PIC24FJ96GA006	64
PIC24FJ96GA008	80
PIC24FJ96GA010	100
PIC24FJ128GA006	64
PIC24FJ128GA008	80
PIC24FJ128GA010	100

* PEP = Processor Extension Pak.
Note 1: Header required for other devices, but optional for this device.
Note 2: VDDCORE Max

AC162062, AC162079, AC162087, AC162091

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162062	PIC18F87J10-ICE 02-01830
AC162079	PIC18F85J90-ICE
AC162087	PIC18F87J50-ICE
AC162091	PIC18F87J11-ICE

Header Setup and Operation - AC162062

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Test points are available on this header to check the following: VDD, VDDCORE and ground.

CAUTION

Header damage.

This header cannot be plugged directly into the PICDEM™ HPC Explorer Board! Device damage will result.

The PICDEM™ HPC Explorer Board is 5V, whereas the ICD device on the header is 3.6V max. Therefore, modification to the demo board is necessary before the header can be used.

1. Switch S3 should be set to ICE.
2. Jumper J2 must be connected as shown in Figure 3-1 to modify the operating voltage. See demo board documentation for more information.

FIGURE 3-1: DEMO BOARD J2 CONNECTIONS

VINADJ+5V J2 R For V = 3.3V: R = 1.18 kΩ (1%)

Header Setup and Operation - AC162079, AC162087, AC162091

For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Test points are available on this header to check the following: VDD, VDDCORE and ground.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-2: DIMENSIONS – AC162062, AC162079, AC162087, AC162091

Target Pin 1 is located on bottom side of header. 6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. 1.080 0.980 2.325 ASSEM NO.: 02-01830 J1 S1 C3 U1 ICE Device C1 VDDORE GND VDD C4 0.050 Microchip Technology Inc. ©2005 0.420 0.320 1.800 Top

0.560 Typical 0.335 Typical 0.062 Typical Side

Dimensions are in inches

AC162064

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162064 PIC18F97J60-ICE 02-01853

Header Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Test points are available on this header to check the following: VDD, VDDCORE and ground.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-3: DIMENSIONS - AC162064

6-pin Modular Connector
See Appendix B. "Debug Header
Connections" for details.
Dimensions are in inches

AC162065, AC244022

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162065 PIC24FJ128GA010-ICE 02-01856
AC244022	02-01985

Header Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Test points are available on this header to check the following: VDD, VDDCORE and ground.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The following figures list the dimensions for the debug headers. Dimensions are design values in inches.

For this device family, header AC162065 will be sold until depleted. Then, only header AC244022 will remain as a Performance Pak.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-4: DIMENSIONS - AC162065

ASSEMBLY NO.: 82-81556 Microchip Technology Inc. © 2005 2.250 0.795 0.895 0.995 J1 R1 R2 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 1.750 0.555 0.455 0.355 Target Pin 1 is located on bottom side of header. Top

6-pin Modular Connector See Appendix B. "Debug Header Connections" for details.

0.560 Typical 0.062 Typical Side 0.335 Typical

Dimensions are in inches

FIGURE 3-5: DIMENSIONS - AC244022

2.200 0.695 0.795 0.895 J1 J1A -ICE Device C3 C4 C2 Assembly No.: 02-01985 0.525 0.425 0.325 1.850 PIC24 Family Target Pin 1 is located on bottom side of header. Top

8-pin SIL Connector
(0.100 pin spacing)
See Appendix B. "Debug Header
Connections" for details.

0.620 Typical 0.260 Typical Side 0.335 Typical

Dimensions are in inches

AC162067, AC162074

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162067 PIC	8F45J10-ICE 02-01854
AC162074

Header Setup and Operation

For these headers, connect jumpers J2 and J3 to select between the LF and F versions of devices.

Device Device Type Jumper		J2 Jumper J3 Function
PIC18LFXXJ10	LF 1-2 1-2			Disable voltage regulator*
PIC18FXXJ10 F	2-3 2-3	Enable voltage regulator

* VDDCORE must be supplied externally.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figures below list the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-6: DIMENSIONS (28/40-PIN) - AC162067

0.700 0.850 40-Pin Target Pin 1 is located on bottom side of header. 28-Pin Target Pin 1 is located on bottom side of header. Microchip Technology Inc. ASSEMBLY NO.: 62-81854 ©2005 C3 J1 J1 C3 D -ICE Device VDD VDDCORE GND 1.800 0.500 0.200 2.300

6-pin Modular Connector
See Appendix B. "Debug Header
Connections" for details.

Top

0.560 Typical 0.165 Typical 0.062 Typical Side

Dimensions are in inches

FIGURE 3-7: DIMENSIONS (44-PIN) - AC162074

6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. Target Pin 1 is located on bottom side of header. ASSEMBLY NO.:82-01929 Morchship Technology Inc. ICE Device 0.925 1.350 0.850 1.800 Top

0.560 Typical 0.335 Typical 0.062 Typical Side

Dimensions are in inches

AC162078

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162078 PIC1	8F1330-ICD 02-01896

Header Setup and Operation

This debug header can be used with the following targets:

• Customer Target Board for PIC18F1230/1330 devices The target board should have an 18-pin DIP socket to connect to the 18-pin DIP socket on the debug header.
• PICDEM MC motor control demo board Use the 28-pin DIP socket on both boards to mount the debug header onto the PICDEM MC board.
• PICDEM MC LV motor control demo board Use the 28-pin DIP socket on both boards to mount the debug header onto the PICDEM MC LV board.

The following sections detail the configuration of the jumpers on the debug header for use with the above mentioned boards.

CUSTOMER TARGET BOARD

The default configuration is to remove all jumpers.

S1 is not populated and should not be used.

After the debug header is set up, do the following:

1. Connect the header to the target board.
2. Power the target board. You should see the red LED on the debug header turn on.
3. Connect the debug tool to the debug header.
4. Use MPLAB X IDE and the debug tool to develop your application.

PICDEM MC/MC LV MOTOR CONTROL DEMO BOARDS

To run a BLDC motor on the PICDEM MC board or PICDEM MC LV board using the supplied firmware, use the following jumper setup:

Jumper Jumper Setting Jumper Jumper Setting
J1 2-3		JP1 Open
J2 2-3
J3 2-3		JP2 Open
J5 2-3
J6 1-2		JP3 Open
J7 1-2

S1 is not populated and should not be used.

After the debug header is set up, perform the following steps:

1. Connect the header to the PICDEM MC/MC LV target board.
2. Power the target board. You should see the red LED on the debug header turn on.
3. Connect the debug tool to the debug header.
4. Program the part with the demo code.
5. Run the program.
6. Press and release switch S2 on the target board to toggle the direction of the motor's rotation.
7. Press and release switch S1 on the target board to toggle between running and stopping the motor.
8. If the motor stops while reversing from a high speed, there could be an overcurrent condition detected by the system. Reset the system to run the program again.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-8: DIMENSIONS - AC162078

6-pin Modular Connector See Appendix B. "Debug Header Connections" for details. -ICE Device 28-Pin Target Pin 1 is located on bottom side of header 18-Pin Target Pin 1 is located on bottom side of header Microchip 0.950 0.410 2.300 0.300 0.150 2.050 Top 0.560 Typical 0.165 Typical 0.062 Typical Side

Dimensions are in inches

AC162088, AC162094

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162088 PIC24FJ64GA004-ICE 02-01979
AC162094	02-01982

Header Setup and Operation

Both 28-pin and 44-pin device headers have jumpers related to the enabling or disabling of the on-chip 2.5 volt voltage regulator. Please see the section entitled "On-Chip Voltage Regulator" in the dsPIC33F Family Reference Manual (DS70165) for more details.

Jumper J2 Function
1-2	Disable voltage regulator
2-3 Enable voltage regulator
No connection DISVREG controlled by target

Test points are available on this header to check the following:

Test Point Color Signal Test Point Color Signal
TP1	Black	Ground	TP5	White	DISVREG
TP2 Red	V	DD	TP6	White	PGC
TP3 Black	AV	SS	TP7	White	PGD
TP4 Red	AV	DD	TP8	Yellow	ICRST

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine whether a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The following figures list the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-9: DIMENSIONS (28 PIN) - AC162088

6-pin Modular Connector

See Appendix B. "Debug Header

Connections" for details.

Target Pin 1 is located on bottom side of header.

D1 PWR S8 J1 ASSEMBLY NO.:02-01979 Microchip Technology Inc. ©2007 TP5 TP6 TP7 TP8 TP9 TP10 TP11 TP12 TP13 TP14 TP15 TP16 TP17 TP18 TP19 TP20 TP21 TP22 TP23 TP24 TP25 TP26 TP27 TP28 TP29 TP30 TP31 TP32 TP33 TP34 TP35 TP36 TP37 TP38 TP39 TP40 -ICE Device U1 SW1 R15 R16 R17 R18 R19 R20 R21 R22 R23 R24 R25 R26 R27 R28 R29 R30 R31 R32 R33 R34 R35 R36 R37 R38 R39 R40 R41 R42 R43 R44 R45 R46 R47 R48 R49 R50 1.600 0.700 0.175 2.450

Top

0.560 Typical 0.165 Typical 0.062 Typical Side

Dimensions are in inches

FIGURE 3-10: DIMENSIONS (44 PIN) - AC162094

6-pin Modular Connector See Appendix B. "Debug Header Connections" for details.

Target Pin 1 is located on bottom side of header.

ASSEMBLY NO.:02-01982 Microchip Technology Inc. © 2007 -ICE Device 1.600 0.550 2.400 Top

0.560 Typical 0.335 Typical 0.062 Typical Side

Dimensions are in inches

AC244026, AC244027

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244026 PIC1	6F727-ICE 02-02105
AC244027	PIC16LF727-ICE

Header Setup and Operation

This Processor Extension Pak provides extra debugging capability that is not available on the production devices, including the following:

• 3 Address/Data breakpoints (1 Address only breakpoint on production devices)
  • Data capture (Real Time Data Streaming)
• No user Flash resources needed for debugging
• No user RAM resources needed for debugging
• No user pins required

This header has jumpers available for MCLR pull-up and power LED control.

Jumper Setting Function
J2 Open	Disable	weak ICE MCLR pull-up resistor.
	Short Enable weak ICE MCLR pull-up resistor. This option keeps the target program running even after the tool has been disconnected from the header, i.e., the pin will not float high.
J3	Open	Disable power LED indicator. This option saves power.
	Short Enable power LED indicator.

AC244026 HEADER

Additionally, this header has jumpers related to the LDO voltage regulator. Depending on the device pin used for this function, you would use either J4 (RA0), J5 (RA5) or J6 (RA6) for Vcap selection. For details on the voltage regulator, see the PIC16F72X/PIC16LF72X Data Sheet (DS41341).

Jumper Setting		Function
J4,J5,or J6	Open Use only target capacitance for Vcap. This is the standard configuration.
	Short Use both on-board and target capacitance for Vcap.This option is to provide extra margin for the voltage regulator stability/regulation in cases where there is a long lead length between the emulation header Vcap pin and the target Vcap pin. (As examples, when using long-pin DIP transition sockets or certain QFN transition sockets.)

Test points are available on this header to check the following:

Test Point Signal Test Point Signal Pin Jumper
TP1 Vss TP6 Vcap RA0 J4
TP2 VDD TP7 Vcap RA5 J5
TP3 ICD Enable TP8 Vcap RA6 J6
TP4 V	DD
TP5 Vss

AC244027 HEADER

Test points are available on this header to check the following:

Test Point Signal
TP1 Vss
TP2 VDD
TP3 ICD Enable
TP4 V	DD
TP5 Vss

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The following figure lists the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-11: DIMENSIONS - AC244026, AC244027

44-Pin TQFP Target Pin 1 is located on bottom side of header. 0.710 0.345 0.840 Mount for optional right angle socket. 6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. 44-Pin QFN Target Pin 1 is located on bottom side of header. 0.710 2.575 0.165 Typical 40-Pin DIP Target Pin 1 is located on bottom side of header. 0.650 0.800 0.445 0.145 2.190 0.380 Typical 0.062 Typical 0.335 Typical Top Side Dimensions are in inches

AC244033, AC244034

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244033 PIC1	8F14K22-ICE 02-02031
AC244034	PIC18LF14K22-ICE

Header Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-12: DIMENSIONS (20 PIN) - AC244033, AC244034

6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. Target Pin 1 is located on bottom side of header. -ICE Device Assembly NO.: 02-02031 0.150 1.150 0.425 1.800 Top 0.165 Typical 0.062 0.182 Typical Typical Side Dimensions are in inches

AC244035, AC244036

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244035 PIC1	6F1939-ICE 02-02105
AC244036	PIC16LF1939-ICE

Header Setup and Operation

For this header, set up the jumpers as described below.

Jumper Setting Function
J2 Open Disable	weak ICE/MCLR pull-up resistor
Short Enable weak ICE/MCLR pull-up resistor
J3 Open Disable	power LED indicator
Short Enable power LED indicator
J4 Open Use only	target capacitance for VCAP (on RA0 pin)
Short Use both on-board and target capacitance for VCAP (on RA0 pin)
J5 Open Use only	target capacitance for VCAP (on RA5 pin)
Short Use both on-board and target capacitance for VCAP (on RA5 pin)
J6 Open Use only	target capacitance for VCAP (on RA6 pin)
Short Use both on-board and target capacitance for VCAP (on RA6 pin)

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-13: DIMENSIONS - AC244035, AC244036

28-Pin DIP Target Pin 1 is located on bottom side of header. 0.650 44-Pin TQFP Target Pin 1 is located on bottom side of header. 40-Pin DIP Target Pin 1 is located on bottom side of header. 0.710 -ICE Device 0.345 Microchip Technology Inc. © 2009 and vdd Power TQFP QFN Assembly No.: 82-02105 6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. 0.840 44-Pin QFN Target Pin 1 is located on bottom side of header. 0.710 2.575 Top

0.380 Typical 0.165 Typical Side 0.062 Typical 0.335 Typical

Dimensions are in inches

AC244043, AC244044

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244043 PIC1	6F1829-ICE 02-02208
AC244044	PIC16LF1829-ICE

Header Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-14: DIMENSIONS - AC244043, AC244044

ICE Device 0.570 8-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. Assembly No.: 02-02208 0.620 1.930 Top Target Pin 1 is located on bottom side of header. 0.270 1.640

0.260 Typical 0.062 Typical 0.062 Typical 0.165 Typical Side 0.062 Typical 0.165 Typical

Dimensions are in inches

AC244046, AC244047

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244046 PIC1	6F1847-ICE 02-02258
AC244047	PIC16LF1847-ICE

Header Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-15: DIMENSIONS - AC244046, AC244047

ICE Device 0.570 6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. Target Pin 1 is located on bottom side of header. Microsoft Technology Inc. ©2011 0.320 1.640 Assembly No.: 02-02258 0.620 1.930 Top

0.410 Typical 0.062 Typical 0.165 Typical 0.165 Typical Side

Dimensions are in inches

AC244048

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244048	PIC16LF1907-ICE 02-02105

Header Setup and Operation

For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The following figure lists the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-16: DIMENSIONS - AC244048

44-Pin TQFP Target Pin 1 is located on bottom side of header. 0.710 -ICE Device 0.345 6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. 0.840 Mount for optional right angle socket. 0.710 Assembly No.: 02-02105 40-Pin DIP Target Pin 1 is located on bottom side of header. 0.650 0.800 40 28 44-Pin QFN Target Pin 1 is located on bottom side of header. 2.575 28-Pin DIP Target Pin 1 is located on bottom side of header. 0.145 0.445 2.190 Top 0.380 Typical 0.165 Typical Side 0.062 Typical 0.335 Typical Dimensions are in inches

AC244049, AC244050

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC244049	PIC12F752-ICE 02-02300
AC244050	PIC12HV752-ICE

Header Setup and Operation

For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug headers. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-17: DIMENSIONS - AC244049, AC244050

Target Pin 1 is located on bottom side of header. -ICE Device Microchip Technology Inc. © 2011 0.350 0.500 1.150 6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. Assembly No.: 02-02300 Top 0.490 1.800 0.410 Typical 0.062 Typical Side 0.165 Typical 0.165 Typical Dimensions are in inches

AC244053, AC244054

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE	-ICD Device Board Assembly	Number
AC244053	PIC16F1459-ICE 02-02031
AC244054 PIC1	6LF1459-ICE

Header Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-18: DIMENSIONS - AC244053, AC224054

Target Pin 1 Located on Bottom side of Header Assembly No.: 02-02031 8-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. 0.150 1.150 0.425 1.800 Top ICE Device 0.165 Typical 0.062 0.260 Typical Typical Side Dimensions are in inches

AC244060

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify this header, use the following information.

AC Number -ICE	-ICD Device Board Assembly	Number
AC244060	PIC16F753-ICE 02-10153

Header Setup and Operation

For this header, there are no jumpers/switches. MPLAB X IDE will use its selected device to choose the correct device to emulate.

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

FIGURE 3-19: DIMENSIONS - AC244060

6-pin SIL Connector (0.100 pin spacing) See Appendix B. "Debug Header Connections" for details. 14-Pin DIP Target Pin 1 is located on bottom side of header. 0.400 0.385 1.300 0.610 0.110 1.700 Top Microchip J2 Power D1 R1 R2 J1 MCLR UDD USS PGD PGC AUX F HV MOU1 D2 Assembly No.: 02-10153 Microchip Inc. 02-2013 0.330 Typical 0.140 Side 0.062 Typical Board Thickness 0.165 Typical Dimensions are in inches

Appendix A. Debug Header Target Footprints

A.1 INTRODUCTION

To connect a debug header directly to a target board (without the use of a transition socket) the following information will be helpful.

• DIP Device Footprints
• TQFP/PLCC Device Footprints

A.2 DIP DEVICE FOOTPRINTS

The DIP device adapter footprint shown below will accept adapter plugs like Samtec series APA plugs. These plugs can be soldered in place during development/emulation and eliminate the need for other sockets.

FIGURE A-20: DIP FOOTPRINT

0.100 0.028 DIA. PLATED-THRU HOLES + C

UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. Drawing of DIP is 40-pin.

DIP C
8-Pin 0.300
14-Pin 0.300
18-Pin 0.300
20-Pin 0.300
28-Pin 0.300
40-Pin 0.600

A.3 TQFP/PLCC DEVICE FOOTPRINTS

TQFP/PLCC device adapter footprints shown will accept board stackers like Samtec series DWM 0.050 Pitch Stackers. These stackers can be soldered in place during development/emulation and eliminate the need for other sockets.

FIGURE A-21: SINGLE-ROW TQFP/PLCC FOOTPRINT

0.028 DIA PLATED-THRU HOLES 0.050 0.800 0.800

UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. Drawing of device is 44-pin TQFP/PLCC.

FIGURE A-22: DOUBLE AND TRIPLE-ROW TQFP/PLCC FOOTPRINT

0.028 DIA PLATED-THRU HOLES 0.960 1.160 1.360 0.050 0.960 1.160 1.360 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. Drawing of device is 64/68-pin, 80/84-pin and 100-pin

Header pin-out matches the PLCC package. PLCC will map to TQFP as follows:

• Header to 44-pin TQFP – one-to-one mapping.
• Header to 64-pin TQFP – see Figure A-23 for mapping.
• Header to 80-pin TQFP – see Figure A-24 for mapping.
• Header to 100-pin TQFP – one-to-one mapping.

FIGURE A-23: HEADER TO 64-PIN TQFP

NC = No Connection 64 49 68 52 60 1 1 NC 51 48 9 NC 43 16 17 NC 35 33 18 34 26 17 32

FIGURE A-24: HEADER TO 80-PIN TQFP

NC = No Connection 80 61 84 64 74 NC 1 1 11 NC NC 20 21 NC 63 60 43 41 22 42 32 21 40

NOTES:

Appendix B. Debug Header Connections

B.1 INTRODUCTION

The following types of debug header are described here. Information on connecting development tools to the headers is presented here, as well.

• 6-Pin Modular Connector
• 8-Pin SIL Connector
- 6-Pin SIL Connector
• SIL Optional Connection
- Modular-to-SIL Adapter
- Ordering Information

B.2 6-PIN MODULAR CONNECTOR

Debug headers with 6-pin modular (RJ-11/ICSP) connectors can connect directly to the following tools:

• MPLAB REAL ICE in-circuit emulator (Standard Driver Board)
• MPLAB ICD 3

FIGURE B-1: MODULAR CONNECTION

graph TD
    A["From Tool"] --> B["TOP"]
    B --> C["Header Connector J1"]
    D["From Tool"] --> E["SIDE"]
    E --> F["Header Connector"]

B.3 8-PIN SIL CONNECTOR

Debug headers with 8-pin Single In-Line (SIL) connectors are compatible with the tools listed below.

PICkit 3 Programmer/Debug Express

The 6-pin socket of the PICkit 3 may be connected to the 8 header pins by removing the two DAT and CLK pins. However, this may compromise future use of these pins/functions with other tools.

FIGURE B-2: 8-PIN SIL CONNECTION TO A PICKIT

graph TD
    A["TOP"] --> B["PICkit 3"]
    B --> C["1"]
    C --> D["Header Connector"]
    D --> E["1"]
    E --> F["Remove"]
    F --> G["DAT CLK"]

MPLAB ICD 3 In-Circuit Debugger

The 6-pin modular cable attached to the MPLAB ICD 3 may be connected to the 8 header pins through the Modular-to-SIL Adapter.

MPLAB REAL ICE In-Circuit Emulator

The 6-pin modular cable attached to the Standard Driver Board may be connected to the 8 header pins through the Modular-to-SIL Adapter. No SPI trace is available with this connection because of the loss of the DAT and CLK pins.

The 8-pin socket of the High Speed Driver Board or optional Isolation Unit may be connected directly to the 8 header pins. Be sure to line up pin 1 on the board with pin 1 on the header.

FIGURE B-3: 8-PIN SIL CONNECTION TO AN EMULATOR

graph LR
    A["TOP"] --> B["Header Connector"]
    B --> C["J1"]
    C --> D["DAT CLK"]
    D --> E["1"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#ffc,stroke:#333

MPLAB REAL ICE in-circuit emulator High-Speed Receiver Board or optional Isolation Unit

B.4 6-PIN SIL CONNECTOR

Debug headers with 6-pin SIL connectors are compatible with the tools listed below.

PICkit 3 Programmer/Debug Express

The 6-pin socket of the PICkit 3 may be directly connected to the 6 header pins. Be sure to line up pin 1 on the PICkit with pin 1 on the header.

FIGURE B-4: 6-PIN SIL CONNECTION TO A PICKIT

graph LR
    A["TOP"] --> B["1"]
    C["PICKit 3"] --> D["1"]
    E["TOP"] --> F["1"]
    G["Header Connector"] --> H["1"]

MPLAB ICD 3 In-Circuit Debugger

The 6-pin modular cable attached to the MPLAB ICD 3 may be connected to the 6 header pins through the Modular-to-SIL Adapter.

MPLAB REAL ICE In-Circuit Emulator

The 6-pin modular cable attached to the Standard Driver Board may be connected to the 6 header pins through the Modular-to-SIL Adapter. No SPI trace is available with this connection because of the loss of the DAT and CLK pins.

The 8-pin socket of the High Speed Driver Board or optional Isolation Unit may be connected directly to the 6 header pins. Be sure to line up pin 1 on the board with pin 1 on the header.

Note: No SPI trace is possible in this case because of the loss of DAT and CLK pins. However, if the device supports SPI, two additional header pins can be attached to add this functionality.

FIGURE B-5: 6-PIN SIL CONNECTION TO AN EMULATOR

MPLAB REAL ICE in-circuit emulator High-Speed Receiver Board or optional Isolation Unit
Optional SPI trace 2-Pin right angle header can be installed here. (Digi-Key P/N A32702-02-ND)

B.5 SIL OPTIONAL CONNECTION

Debug headers with 6- and 8-pin SIL connectors have an additional unpopulated connector available for customer use. This connector has the same pinout as the SIL connector. Solder wires to access individual pins or attach an entire vertical connector.

FIGURE B-6: SIL OPTIONAL CONNECTION

SIL Connector Optional Connector J1 J1A

B.6 MODULAR-TO-SIL ADAPTER

To adapt a 6-pin modular connector to an 8-pin SIL (Single In-Line) connector, you can use this adapter. You can also use this adapter for a 6-pin modular connector to an 6-pin SIL connector. In either case, line up pin 1 of J1 with pin 1 of the 6- or 8-pin header connector.

FIGURE B-7: MODULAR-TO-SIL ADAPTER CONNECTION

graph TD
    A["From Tool"] --> B["TOP"]
    B --> C["TOP"]
    C --> D["TOP"]
    D --> E["6- or 8-Pin Header Connector"]
    B --> F["Modular Connector SIL Connector"]
    C --> F
    D --> F
    F --> G["J2 1: ICRST, VDD"]
    F --> H["J2 2: ICDT, ICCK, NC"]
    F --> I["J1 1: ICRST, VDD"]
    F --> J["J1 2: ICDT, ICCK"]
    F --> K["J1 3: TP1 USD0, TP2 USCK"]

B.7 ORDERING INFORMATION

To order the development tools and other hardware shown here, please refer to the table below.

TABLE B-1: MICROCHIP HARDWARE ORDERING NUMBERS

Hardware Order #
MPLAB REAL ICE in-circuit emulator (Standard Communication) DV244005
MPLAB REAL ICE in-circuit emulator (High-Speed Communication) - Performance Pak AC244002
MPLAB REAL ICE Isolation Unit (works with High-Speed Communication) AC244005
MPLAB ICD 3 DV164035
PICkit 3 Debug Express DV164131
Modular-to-SIL Adapter AC164110

NOTES:

APPENDIX C: REVISION HISTORY

C.1 Revision N (February 2006)

• Added Appendix A: Revision History
• Updated document to reflect support of additional tools
  • Additional minor corrections throughout document text

C.2 Revision P (September 2007)

• Updated document to reflect support of additional tools
  • Additional minor corrections throughout document text

C.3 Revision Q (December 2008)

• Added limitations to header setup sections as needed.
• Changed "ICD Headers" and "ICE Headers" to "Required Headers" and "Optional Headers" and move sections as necessary.
• Rearranged sections to organize by header (AC) number.

C.4 Revision R (April 2009)

• Added board dimensions
• Removed header pinouts
• Added board identification info
• Added "why use a header" section
• Added footprint appendix
• Changed MPLAB ICD 2 and MPLAB ICD 3 references to generic debug tool
• Added MPLAB REAL ICE in-circuit emulator and MPLAB ICD 3 as programmers

C.5 Revision S (July 2010)

• Added AC244028
• Added Header Connections chapter
• Added AC244033, AC244034
• Moved limitations to common Limitations file and added small section referencing Help files
• Added PIC12F617 to AC162083

C.6 Revision T (February 2012)

• Added AC244043 and AC244044 and associated devices
• Removed Header Setup and Operation for AC244045

C.7 Revision U (June 2012)

• Name changed from "Debug Header Specification" to "Processor Extension Pak & Header Specification".
• "Processor Extension Pak and Header Defined" section added.
• "MPLAB IDE and MPLAB X IDE Use with Headers" section added.

C.8 Revision V (September 2015)

• Removed references to MPLAB IDE v8 and tools supported only on that IDE. Also removed references to PICkit 2.
  • Numbering added to chapters.
• Chapter 1. "PEP and Debug Header Overview" - reorganized for better information flow.
• Chapter 2. "Required Debug Headers" - Added AC244061, AC244062.
• Chapter 3. "Optional Debug Headers" - Added AC244049, AC244059, AC244060.

C.9 Revision W (November 2015)

Chapter 1. "PEP and Debug Header Overview" - corrected typo in Section 1.3, and added 2 links.

NOTES:

Index

Numerics

6-Pin Modular Connector 87

6-Pin SIL Connector....89

8-Pin SIL Connector.... 88

A

AC162050 16

AC162052 18

AC162053 20

AC162054 20

AC162055 18

AC162056 18

AC162057 18

AC162058 16

AC162059 22

AC162060 24

AC162061 26

AC162062 48

AC162064 50

AC162065 52

AC162066 28

AC162067 55

AC162070 22

AC162074 55

AC162078 58

AC162079 48

AC162083 30

AC162087 48

AC162088 61

AC162091 48

AC162094 61

AC162096 22

AC244022 52

AC244023 32

AC244024 32

AC244026 64

AC244027 64

AC244028 34

AC244033 67

AC244034 67

AC244035 69

AC244036 69

AC244043 71

AC244044 71

AC244045 36

AC244046 73

AC244047 73

AC244048 75

AC244049 77

AC244050 77

AC244051 38

AC244052 38

AC244053 79

AC244054 79

AC244060 81

AC244061 38

AC244062 40

Additional Information 14

C

Calibration Bits 14

J

Jumper Settings16, 18, 24, 28, 34, 48, 55, 58, 61, 64, 69

M

Modular Connector.... 87

Modular-to-SIL Adapter.... 90

0

Ordering Hardware....91

P

Performance.... 14

PIC10F200 15

PIC10F202 15

PIC10F204 15

PIC10F206 15

PIC10F220 15

PIC10F222 15

PIC10F320 15

PIC10F322 15

PIC10LF320.... 15

PIC10LF322.... 15

PIC12F1501.... 15

PIC12F1822....44

PIC12F1840.... 44

PIC12F508 15

PIC12F509 15

PIC12F510 15

PIC12F519 15

PIC12F609 1530

PIC12F615 1530

PIC12F617 1530

PIC12F629 15 16

PIC12F635 15 18

PIC12F675 15 16

PIC12F683 15 16

PIC12F752 43

PIC12HV609 15,30

PIC12HV615 15,30

PIC12HV752 43

PIC12LF1501 15

PIC12LF1822 44

PIC12LF1840 44

PEP and Debug Header Specification

PIC16F1454 43

PIC16F1455 43

PIC16F1458 43

PIC16F1459 43

PIC16F1503 16

PIC16F1507 16

PIC16F1508 43

PIC16F1509 43

PIC16F1823 44

PIC16F1824 44

PIC16F1825 44

PIC16F1826 44

PIC16F1827 44

PIC16F1829 44

PIC16F1847 44

PIC16F1933 44

PIC16F1934 44

PIC16F1936 44

PIC16F1937 44

PIC16F1938 44

PIC16F1939 44

PIC16F505 15

PIC16F506 15

PIC16F526 15

PIC16F527 15

PIC16F570 15

PIC16F610 1530

PIC16F616 1530

PIC16F627A.... 15,20

PIC16F628A.... 15,20

PIC16F630 15 18

PIC16F631 1526

PIC16F636 15 18

PIC16F639 1528

PIC16F648A.... 16,20

PIC16F676 16 18

PIC16F677 1626

PIC16F684 16 18

PIC16F685 1626

PIC16F687 1626

PIC16F688 16 18

PIC16F689 1626

PIC16F690 1626

PIC16F716 16 20

PIC16F722 43

PIC16F723 43

PIC16F724 43

PIC16F726 43

PIC16F727 43

PIC16F785 16 24

PIC16HV610 15.30

PIC16HV616 1530

PIC16HV785 16.24

PIC16LF1454 43

PIC16LF1455 43

PIC16LF1458 43

PIC16LF1459 43

PIC16LF1503 16

PIC16LF1507 16

PIC16LF1508 43

PIC16LF1509 43

PIC16LF1823 44

PIC16LF1824 44

PIC16LF1825 44

PIC16LF1826 44

PIC16LF1827 44

PIC16LF1829 44

PIC16LF1847 44

PIC16LF1902 44

PIC16LF1903 44

PIC16LF1904 44

PIC16LF1906 44

PIC16LF1907 44

PIC16LF1933 44

PIC16LF1934 44

PIC16LF1936 44

PIC16LF1937 44

PIC16LF1938 44

PIC16LF1939 44

PIC16LF722 43

PIC16LF723 43

PIC16LF724 43

PIC16LF726 43

PIC16LF727 43

PIC18F1230 45 58

PIC18F1330 45 58

PIC18F13K22....45

PIC18F13K50.... 16

PIC18F14K22.... 45

PIC18F14K50.... 16

PIC18F24J10 45

PIC18F25J10 45,55

PIC18F44J10 45

PIC18F45J10 45,55

PIC18F63J11 45

PIC18F63J90 45

PIC18F64J11 45

PIC18F64J16 45

PIC18F64J90 45

PIC18F64J95 45

PIC18F65J10 45

PIC18F65J11 45

PIC18F65J15 45

PIC18F65J16 46

PIC18F65J50 46

PIC18F65J55 46

PIC18F65J90 45

PIC18F66J10 45

PIC18F66J11 46

PIC18F66J15 45

PIC18F66J16 46

PIC18F66J50 46

PIC18F66J55 46

PIC18F66J60 46

PIC18F66J65 46

PIC18F67J10 45

PIC18F67J11 46

PIC18F67J50 46

PIC18F67J60 46

PIC18F83J11 45

PIC18F83J90 45

PIC18F84J11 45

PIC18F84J16 45

PIC18F84J90 45

PIC18F84J95 45

PIC18F85J10 45

PIC18F85J11 45

PIC18F85J15 45

PIC18F85J16 46

PIC18F85J50 46

PIC18F85J55 46

PIC18F85J90 45

PIC18F86J10 45

PIC18F86J11 46

PIC18F86J15 45

PIC18F86J16 46

PIC18F86J50 46

PIC18F86J55 46

PIC18F86J60 46

PIC18F86J65 46

PIC18F87J10 45

PIC18F87J11 46

PIC18F87J50 46

PIC18F87J60 46

PIC18F96J60 46

PIC18F96J65 46

PIC18F97J60 46

PIC18LF13K22 45

PIC18LF13K50 16

PIC18LF14K22 45

PIC18LF14K50 16

PIC18LF24J10 45

PIC18LF25J10 45 55

PIC18LF44J10 45

PIC18LF45J10 45 55

PIC24F04KA200 16

PIC24F04KA201 16

PIC24F08KA101 47

PIC24F08KA102 47

PIC24F16KA101 47

PIC24F16KA102 47

PIC24FJ128GA006.... 47

PIC24FJ128GA008.... 47

PIC24FJ128GA010.... 47

PIC24FJ16GA002.... 47

PIC24FJ16GA004 47

PIC24FJ32GA002.... 47

PIC24FJ32GA004.... 47

PIC24FJ48GA002.... 47

PIC24FJ48GA004 47

PIC24FJ64GA002 47

PIC24FJ64GA004 47

PIC24FJ64GA006 47

PIC24FJ64GA008 47

PIC24FJ64GA010 47

PIC24FJ96GA006 47

PIC24FJ96GA008 47

PIC24FJ96GA010.... 47

PICDEM HPC Explorer Board.... 48

Pin Count 1543, 45, 47

s

SIL Connector, 6 Pin 89

SIL Connector, 8 Pin 88

Switch Settings.... 26

Switch Settings, Rotary 30

T

Transition Socket 11

v

Vdd Max....15, 43, 45, 47

Vddcore Max 15,43,45,47

Worldwide Sales and Service

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: [phone]

Fax: [phone]

Technical Support:

http://www.microchip.com/

support

Web Address:

www.microchip.com

Atlanta

Duluth, GA

Tel: [phone]

Fax: [phone]

Austin, TX

Tel: [phone]

Boston

Westborough, MA

Tel: [phone]

Fax: [phone]

Chicago

Itasca, IL

Tel: [phone]

Fax: [phone]

Cleveland

Independence, OH

Tel: [phone]

Fax: [phone]

Dallas

Addison, TX

Tel: [phone]

Fax: [phone]

Detroit

Novi, M

Tel: [phone]

Houston, TX

Tel: [phone]

Indianapolis

Noblesville, IN

Tel: [phone]

Fax: [phone]

Los Angeles

Mission Viejo, CA

Tel: [phone]

Fax: [phone]

New York, NY

Tel: [phone]

San Jose, CA

Tel: [phone]

Canada - Toronto

Tel: [phone]

Fax: [phone]

ASIA/PACIFIC

Asia Pacific Office

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Harbour City, Kowloon

Hong Kong

Tel: [phone]

Fax: [phone]

Australia - Sydney

Tel: [phone]

Fax: [phone]

China - Beijing

Tel: [phone]

Fax: [phone]

China - Chengdu

Tel: [phone]

Fax: [phone]

China - Chongqing

Tel: [phone]

Fax: [phone]

China - Dongguan

Tel: [phone]

China - Hangzhou

Tel: [phone]

Fax: [phone]

China - Hong Kong SAR

Tel: [phone]

Fax: [phone]

China - Nanjing

Tel: [phone]

Fax: [phone]

China - Qingdao

Tel: [phone]

Fax: [phone]

China - Shanghai

Tel: [phone]

Fax: [phone]

China - Shenyang

Tel: [phone]

Fax: [phone]

China - Shenzhen

Tel: [phone]

Fax: [phone]

China - Wuhan

Tel: [phone]

Fax: [phone]

China - Xian

Tel: [phone]

Fax: [phone]

ASIA/PACIFIC

China - Xiamen

Tel: [phone]

Fax: [phone]

China - Zhuhai

Tel: [phone]

Fax: [phone]

India - Bangalore

Tel: [phone]

Fax: [phone]

India - New Delhi

Tel: [phone]

Fax: [phone]

India - Pune

Tel: [phone]

Japan - Osaka

Tel: [phone]

Fax: [phone]

Japan - Tokyo

Tel: [phone]

Fax: [phone]

Korea - Daegu

Tel: [phone]

Fax: [phone]

Korea - Seoul

Tel: [phone]

Fax: [phone] or

82-2-558-5934

Malaysia - Kuala Lumpur

Tel: [phone]

Fax: [phone]

Malaysia - Penang

Tel: [phone]

Fax: [phone]

Philippines - Manila

Tel: [phone]

Fax: [phone]

Singapore

Tel: [phone]

Fax: [phone]

Taiwan - Hsin Chu

Tel: [phone]

Fax: [phone]

Taiwan - Kaohsiung

Tel: [phone]

Taiwan - Taipei

Tel: [phone]

Fax: [phone]

Thailand - Bangkok

Tel: [phone]

Fax: [phone]

EUROPE

Austria - Wels

Tel: [phone]

Fax: [phone]

Denmark - Copenhagen

Tel: [phone]

Fax: [phone]

France - Paris

Tel: [phone]

Fax: [phone]

Germany - Dusseldorf

Tel: [phone]

Germany - Karlsruhe

Tel: [phone]

Germany - Munich

Tel: [phone]

Fax: [phone]

Italy - Milan

Tel: [phone]

Fax: [phone]

Italy - Venice

Tel: [phone]

Netherlands - Drunen

Tel: [phone]

Fax: [phone]

Poland - Warsaw

Tel: [phone]

Spain - Madrid

Tel: [phone]

Fax: [phone]

Sweden - Stockholm

Tel: [phone]

UK - Wokingham

Tel: [phone]

Fax: [phone]

07/14/15