LPNK3063CL - Washing machine LG - Free user manual and instructions

USER MANUAL LPNK3063CL LG

Please read through this manual. It contains valuable information about your air conditioner. This manual may help save time and money by explaining proper product maintenance and preventing improper use.

Pay close attention to precautions in order to prevent potential hazards and damage from misuse or improper installation. LG is not responsible for any damages caused by misuse of the product.

Prior to installation, a 30-watt-conditioning unit must be submitted for approval by the utility service and provides electricity (EN 61000) (2018).

Floor Standing-Type Air Conditioner Owner's Manual

TABLE OF CONTENTS

a. Features and Specifications
b. Indoor Unit Controls and Indicators
c. Name and Function-Remote Control
d. Air conditioner Operation

Line drawing of four people interacting, one holding a gift box (no text or symbols)

or Your Records

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

lead This Manual

Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.

You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

CAUTION

• Contact the authorized service technician for repair or maintenance of this unit.
• Contact the installer for installation of this unit.
  • The air conditioner is not intended for use by young children or invalids without supervision.
• Young children should be supervised to ensure that they do not play with the air conditioner.
• When the power cord is to be replaced, replacement work shall be performed by authorized personnel only.
  • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.

To prevent injury and property damage, follow these instructions.

■ Incorrect operation due to ignoring instructions will cause harm or damage, the seriousness of which is indicated by the following symbols.

WARNING

This symbol shows the possibility of death or serious injury.

CAUTION

This symbol indicates the possibility of injury or damage to property.

	Never Do This
	Always Do This

■ The following items are classified by these symblos.

WARNING

■ Do not install, remove and re-install the unit by yourself.

Improper installation will cause water leakage, electrical shock, or fire. Please consult authorized dealer or specialist for the installation work.

CAUTION

The reverse cycle system of the air conditioner is based on the air cooling type heat pump which absorbs heated air from the outdoor unit and discharges it indoor.

Therefore if the outdoor unit is exposed to very low temperature, specifically below 0^ C, the heating capacity drops off rapidly.

(-) If the damage or use is unspecified. (1) If you are (2) If you are (3) If you are (4) If you are (5) If you are (6) If you are (7) If you are (8) If you are (9) If you are (10) If you are (11) If you are (12) If you are (13) If you are (14) If you are (15) If you are (16) If you are (17) If you are (18) If you are (19) If you are (20) If you are (21) If you are (22) If you are (23) If you are (24) If you are (25) If you are (26) If you are (27) If you are (28) If you are (29) If you are (30) If you are (31) If you are (32) If you are (33) If you are (34) If you are (35) If you are (36) If you are (37) If you are (38) If you are (39) If you are (40) If you are (41) If you are (42) If you are (43) If you are (44) If you are (45) If you are (46) If you are (47) If you are (48) If you are (49) If you are (50) If you are (51) If you are (52) If you are (53) If you are (54) If you are (55) If you are (56) If you are (57) If you are (58) If you are (59) If you are (60) If you are (61) If you are (62) If you are (63) If you are (64) If you are (65) If you are (66) If you are (67) If you are (68) If you are (69) If you are (70) If you are (71) If you are (72) If you are (73) If you are (74) If you are (75) If you are (76) If you are (77) If you are (78) If you are (79) If you are (80) If you are (81) If you are (82) If you are (83) If you are (84) If you are (85) If you are (86) If you are (87) If you are (88) If you are (89) If you are (90) If you are (91) If you are (92) If you are (93) If you are (94) If you are (95) If you are (96) If you are (97) If you are (98) If you are (99) If you are

• It will cause electrical shock or fire.

① operate with wetland

• It will cause electrical shock.

Street photo with visible store signboards and partial text overlay

- Since the fan rotates at high speed, this may cause an injury or damage the unit.

①. Skin exposure the skin effective for your skin for Skin conditions of time

• This could damage your health.

of when an abnormality (smed, assuming, etc) and the air conditions and air pollutants (If the plug or turn)

- If the unit continues to operate in an abnormal condition, it may cause fire, damage, etc. In this case, consult your dealer.

in repair or relocation she cannot be done by the best.

- If this is done incorrectly, it may cause a fire, electric shock, injury by dropping of the unit, water leakage, etc. Consult your dealer.

CAUTION

• Contact the authorized Service technician for repair or maintenance of this unit.
• Contact the installer for installation of this unit.
  • The air conditioner is not intended for use by young children or infirm persons without supervision.
  • The appliance is not intended for use by young children or infirm persons without supervision.
• Young children should be supervised to ensure that they do not play with the appliance.
• If the supply flexible cord is damaged, it must be replaced by the manufacturer or the manufacturer's service agent or similar qualified person in order to avoid hazard.

CAUTION

① air filter is to be

• It may cause an injury.
- Should be disconnected from supply

Cropped image showing partial text with a circular emblem and fragmented characters, likely from a document or sign.

• Water may enter the unit and degrade the insulation. It may cause an electric shock.

The same well when used

• An oxygen shortage may occur.

The unit is to be in the world.

• It may cause an electric shock, burning.

I have out a pet house

• This could injure the pet or plant.

Q: Leave on Installation

• The unit may drop or fall down and cause an injury.

Apply an electricide and the same

• It may cause a fire or deformation of the cabinet.

Scanned text fragment with partially visible Chinese characters and faint background patterns

- It may affect combustion.

Cropped image showing partial text with a circular emblem and visible Chinese characters, likely from a document or sign.

• It may cause an injury through dropping or falling down.

Scanned text fragment with partially visible Chinese characters and a circular emblem on the left.

• It will cause an injury, electric shock by the high voltage.

The unit is not rolling

• If not, dirt may collect and cause a fire.

① Open the image ② Open the image

• It may cause an injury, electric shock by the high voltage.

© No not use for special purchases.

- Do not use this air conditioner to preserve precision devices, food, animal, plants, and art objects. It may cause deterioration of quality, etc.

No not operate for a long time in high is already, leaving a longer

- In the cooling mode, if it is operated in a room with high humidity (80%RH or more) for a long time, water condensed in the air conditioner may drop and may wet and spoil furniture, etc.

Design for cooling & Heating Super energy efficiency Micom control Whisper quiet operation Wireless remote control 2 cooling speeds Removable air filter Anti-Bacteria filter 3 minutes delay circuit Jet Cool operation Energy saving Auto restart Plasma Air Purifying system (CA/HA/ZA MODEL)

Air Outlet Vent Remote Signal Receptor Air Intake Vent

Air Intake Vent (Rear) Air Outlet Vent

Simple gray horizontal bar with rounded ends and a small white stripe at the bottom (no text or symbols)

Air Cooling Mode Temp Fast Speed On/Off

(Heat Pump Model)

Fan Mode Temp Fan Speed On/Off

(Cooling Model)

START/STOP BUTTON

Operation starts when this button is pressed and stops when the button is pressed again.

OPERATION MODE SELECTION BUTTON

Used to select the operation Mode.

INDOOR FAN SPEED SELECTION

Used to select fan speed in two steps-low, high.

Used to circulate room air without cooling.

ROOM TEMPERATURE SETTING BUTTONS

Used to select the room temperature.

The remote control transmits the signals to the system.

1 2 14 3 4 5 6 7 8 9 10 11 12 13 (Heat Pump Model)

1 2 3 4 5 6 7 8 9 10 11 12 13 (Cooling Model)

Signal Transmitter

Operation Display of the Remote Control

Timer Set Button

Plasma Air Purifying Button(CA/HA/ZA MODEL) Fan Operation Button(CL/HL/ZL MODEL)

• Transmits the signals to the Floor Standing Type air conditioner
- Each time the button is pressed, the mode is changed in the following process. Timer set (1, 2, 3, 4, 5, 6, 7 hours) If you select "0:00" the off Timer function will be canceled.
Auto Airflow Direction Control Button • The vertical louvers swing left and right.
Jet Cool Operation Button
- Indoor Fan Speed Selection Button - To select the desired fan speed in two steps [Low, High]
Cooling ON Button
● Heating Button (Heat Pump Model Only) Auto Operation Button(Cooling Model Only)
Soft Dry Operation Button
Energy Saving Operation Button
Power ON/OFF Button • Operation will start when this button is pressed, and stop when the button is pressed again.
● Temperature Setting Buttons
Electric Heater ON/OFF Button(Optional)

Wireless Remote Control Puts all functions at your fingertips

Handling the remote control

• Aim at the signal receptor on the Floor Standing Type air conditioner when operating.
  • The remote control signal can be received at a distance of up to about 7 meters.
• Be sure that there are no obstructions between the remote control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat source.

How to mount on a wall

Use the screws to secure the holder to the wall or attach the holder side of indoor unit.

Line drawing of a hand using a screwdriver to lift a vertical component (no text or symbols)

Diagram of a vertical panel with horizontal bands and a switch, no text or symbols present

To insert the remote control to the holder.

Insert

Pull

How to insert batteries

Remove the cover from the back of the remote controller.

- Slide the cover according to the arrow direction.

Insert two batteries.

- Be sure that the (+) and (-) directions are correct.

- Be sure that both batteries are new.

Re-attach the cover.

- Slide the cover into back position.

Illustration of hands using a tool to cut a piece, showing a magnified view of the process (no text or symbols present)

Illustration of hands using a tool to adjust or install a component, enclosed in a circle (no text or symbols)

Illustration of hands using a tool to interact, enclosed in a circle with an arrow indicating direction (no text or symbols)

- Do not use rechargeable batteries such batteries are different from standard dry cells in shape, dimensions, and performance.

- Change the batteries with a new one if the remote control does not work properly after using for an extended length of time.

• Each time the Operation Mode Selection Button is pressed, the Operation Mode is shifted in the arrow direction.

graph TD
    A["Cooling Operation"] --> B["Soft Dry Operation"]
    B --> C["Heating Operation"]

(Heat Pump Model)

graph TD
    A["Thermal Image"] --> B["Cooling Operation"]
    B --> C["Auto Operation"]
    C --> D["Soft Dry Operation"]

(Cooling Model)

• Each time the Fan speed Button is pressed, the Fan speed is shifted in the arrow direction.

graph TD
    A["Input Image"] --> B["Hand Clicking"]
    B --> C{Transition}
    C -->|High| D["Intermediate State"]
    C -->|Low| E["Final State"]

Press the Start/Stop Button.

Simple white oval shape on a dark gray background (no text or symbols)

Hand interacting with a control panel interface (no text or symbols visible)

Select Cooling Operation. Press the Operation Mode Selection Button. Press the Cooling Operation Button on the remote controller.

A small, white oval shape on a dark gray background with no visible text or symbols.

Hand holding a control panel with buttons and a pointer (no text or symbols visible)

Pure abstract gray gradient shape with no text, numbers, or symbols

Set the temperature lower than the room temperature. The temperature can be set within a range of 16^ C\~ 30^ C by 1^ C.

Simple diagram with two vertical oval shapes and two upward-pointing arrows, no text or symbols present.

To raise the temperature To lower the temperature

15

When you finish the temperature setting.

After 4 seconds

Set the Fan Speed

A faint, indistinct white oval shape on a dark gray background with no visible text or symbols.

Hand-drawn diagram showing a hand pointing at a control panel with labeled buttons and symbols

graph TD
    A["High"] --> B["Low"]
    style A fill:#f9f,stroke:#333
    style B fill:#bbf,stroke:#333

☐ Each time the Fan Speed Button is pressed, the Fan Speed mode is shifted in the arrow direction.

Press the Start/Stop Button.

Simple gray image with a small white oval shape in the center (no text or symbols)

Diagram showing a hand interacting with a device panel with labeled buttons and icons, including symbols like '5', '0', and a triangle.

Select Soft Dry Operation.

Press the Operation Mode Selection Button.

Press the Soft Dry Operation Button on the remote controller.

Simple white oval shape on a dark gray background, no text or symbols present.

Hand-drawn diagram of an electronic device with labeled buttons and a finger pointing to the button.

Pure grayscale gradient with no text, symbols, or identifiable objects

Set the temperature lower than the room temperature.

The temperature can be set within a range of 16°C\~30°C by 1°C.

Simple diagram with two vertical oval shapes and downward-pointing arrows, no text or symbols present

To raise the temperature

To lower the temperature

Gray abstract shape with curved edges and no visible text or symbols

During soft Dry Operation

• The indoor fan speed is automatically set to low and can be set fan speed.

Simple white oval shape on a dark gray background, no text or symbols present.

Diagram showing a hand interacting with a device panel with labeled buttons and indicators

Abstract gray shape with a downward arrow, no text or symbols present

Abstract gray shape with a right-pointing arrow, no text or symbols present

High
Low

Press the Start/Stop Button.

A simple, minimalist white oval shape on a dark gray background with no text or symbols.

Diagram showing a hand interacting with a device interface with labeled buttons and icons

Press the Jet Cool button to operate the speed cooling mode and the unit will operate in super high fan speed on cooling mode.

Diagram showing a hand pointing to a control panel with labeled buttons and symbols

Abstract grayscale gradient with curved shapes and no visible text or symbols

To cancel the Jet Cool mode, press the Jet Cool button again or the fan speed button or the room temperature setting button and the unit will operate in high fan speed on cooling mode.

Diagram showing three finger icons with plus, minus, and triangle symbols indicating correct or incorrect actions

Hand interacting with a control panel showing various function buttons (no text or symbols visible)

NOTE:

☐ During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely high speed setting the room temp. automatically to 18°C. It is especially used to cool the room temp. in the shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode however, the JET COOL function is not available.
☐ In order to return to the normal cooling mode from the JET COOL mode, you just press either the operation mode selection button, airflow volume selection or temp. setting button or the JET COOL button again.

Press the Start/Stop Button.

Simple white oval shape on a dark gray background (no text or symbols)

Diagram showing a hand interacting with a control panel with labeled buttons and symbols

Select heating Operation.

Press the Operation Mode Selection Button.

Press the Heating Operation Button on the remote controller.

Simple white oval shape on a dark gray background (no text or symbols)

AET

1 30

Set the temperature lower than the room temperature.

The temperature can be set within a range of 16°C\~30°C by 1°C.

Simple diagram with two vertical oval shapes and downward arrows, no text or symbols present

To raise the temperature

To lower the temperature

Dark gray abstract shape with no visible text, numbers, or symbols

Set the Fan Speed.

A small, white oval shape on a dark gray background with no visible text or symbols.

Diagram showing a hand interacting with a device interface with labeled buttons and icons, including symbols like '⊕', 'Φ', and '△'.

* Each time the Button is pressed, the Fan Speed mode is shifted.

Press the Start/Stop Button.

Simple white oval shape on a dark gray background (no text or symbols)

Diagram showing a hand interacting with a device panel with labeled buttons and icons, including symbols like '⊕', '△', and 'O'.

Select heating + E/heater Operation.

Press the Operation Mode Selection Button.

Press the Heating Operation Button on the remote controller.(When the unit operates in heating mode.)

Diagram showing a hand pressing a button on an electronic device before and after transformation, with labeled buttons and directional arrow.

1 30

Set the temperature lower than the room temperature.

The temperature can be set within a range of 16°C\~30°C by 1°C.

Simple diagram with two vertical arrows and a checkmark inside an oval shape (no text or symbols)

To raise the temperature To lower the temperature

1 30

Set the Fan Speed.

Simple white oval shape on a dark gray background, no text or symbols present.

Illustration of a hand pressing a button on a device panel with icons (no text or symbols)

* Each time the Button is pressed, the Fan Speed mode is shifted.

Press the Start/Stop Button.

A simple white oval shape on a gray background with no text or symbols.

Hand-drawn diagram showing a hand pressing a button on an electronic device with labeled buttons and symbols

Select Auto Operation.

Press the Operation Mode Selection Button.

Press Auto Operation Button on the remote controller.

Simple white oval shape on a dark gray background (no text or symbols)

Hand-drawn diagram of an electronic device with labeled buttons and a pointer indicating action

Pure abstract dark shape with no visible text, numbers, or symbols

Set the temperature upper than the room temperature.

The temperature can be set within a range of -2\~2 by 1 level.

Simple diagram with two vertical oval shapes and two upward-pointing arrows, no text or symbols present.

2 1 0 -1 -2 Cold Cool Proper Warm Hot

(This indication will be shifted to the initial Auto Mode Display state after 4 seconds.)

To raise the temperature (When you feel too cool or cold)

To lower the temperature (When you feel too warm or hot)

During Auto Operation

- It is impossible to switch the indoor fan speed because of being already set to the best condition by fuzzy rule.

Press the Start/Stop Button.

Simple white oval shape on a dark gray background, no text or symbols present.

Hand pointing at a diagram of a device with labeled components (no readable text or symbols)

Select Energy Saving mode.

You can select this function during the operation of Cooling/Auto/Soft Dry.

Hand pointing at a control panel with icons (no text or symbols)

Dark gray abstract shape with no visible text, numbers, or symbols

To cancel the Energy Saving mode, press the Energy Saving button again and the unit will operate on Cooling/Auto/Soft Dry mode.

Illustration of a hand pointing at a control panel with icons (no text or symbols)

Dark gray abstract shape with no visible text, numbers, or symbols

Auto restart

In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions.

Press the Start/Stop Button.

Hand interacting with a device displaying various icons (no text or symbols visible)

Press Fan Operation Button.

Dark gray abstract shape with no visible text or symbols

Set the Fan Speed.

Simple white oval shape on a dark gray background, no text or symbols present.

Hand pointing at a control panel with icons (no text or symbols visible)

graph TD
    A["High"] --> B["Low"]
    style A fill:#f9f,stroke:#333
    style B fill:#bbf,stroke:#333

☐ Each time the Fan Speed Button is pressed, the Fan Speed mode is shifted in the arrow direction.

Press the Start/Stop Button.

Simple white oval shape on a dark gray background, no text or symbols present.

Hand-drawn diagram showing a hand pressing a button on a device with labeled buttons and icons

(Operation will start when the button is pressed, and stop when the button is pressed again.)

Press the Auto Swing Button and then louvers will swing left and right.

Hand pointing at a control panel with buttons (no text or symbols visible)

Press the Airflow Direction Control Button again to set the Vertical Louver at the desired airflow direction.

The vertical louver swing left and right.

Note

Always use the remote control to adjust the right/left airflow direction, manually moving the vertical airflow direction louver by hand could change the air conditioner.

Vertical Airflow Direction Control

Adjust the vertical airflow direction manually by moving the horizontal louvers with hand.

Air Purifying Operation only

Press the Plasma Air Purifying Operation Start/Stop Button.

A small, white oval shape on a dark gray background with no visible text or symbols.

Hand-drawn diagram of a control panel with labeled buttons and a finger pointing to the button.

(Operation will start when the button is pressed, and stop when the button is pressed again.)

Select Fan speed.

The display shows low fan speed at the initial condition.

Simple white oval shape on a dark gray background, no text or symbols present.

Hand pointing at a control panel with icons and symbols (no readable text or labels)

High

20 20

Low

- You can operate the Plasma Air Purifying under the unit operation of cooling, heating, soft dry or Auto mode.

Air Purifying Operation with Cooling or any other Operation.

1. Press the Start/Stop Button.
2. Select the desired Operation Mode.
3. Press the Plasma Air Purifying Operation ON/OFF Button.
4. Set the fan speed.

VCEL)

Press the Start/Stop Button.

A simple white oval shape centered on a dark gray background, with no text or symbols visible.

Diagram showing a hand interacting with a device interface with labeled buttons and icons

Press the Timer Button.

Hand holding a device with labeled buttons including 'ATLL' and '率'

Solid dark gray rectangular shape with no visible text, symbols, or markings

- If you press the button, the selected off timer is displayed as follows;

$$ 1 \rightarrow 2 \rightarrow 3 \rightarrow 4 \rightarrow 5 \rightarrow 6 \rightarrow 7 \rightarrow 8 $$

- If you select ' ☐', the Off Timer function will be cancelled.

When you finish the Off Timer setting, the Timer indicator lights off.

After 4 seconds After 4 seconds

During off-timer operation if you press the Timer Button, the rest time will be displayed.

CAUTION: Before performing any maintenance, turn off the main power to the system.

1 Remove the Air Filter. Take hold of the tab and pull slightly forward to remove the filter. 2 Clean. • To remove the dust adhering to the filters, either use a vacuum cleaner, or wash them in water and dry in the shade. • Re-insert the filter to the original position.

• Don't wash with water. • Wipe with a soft dry cloth.

Remove the Air Cleaner. Take hold of the tab and pull slightly forward to remove the air cleaner. Clean. • Dip the air cleaner into the water mixed with detergent, for 20~30 minutes, and dry in the shade. • Re-insert the air cleaner to the original position.

• Water hotter than 40 °C. Could cause deformation and/or discoloration. • Volatile substances. Could damage the surfaces of the air conditioner.

Operate the air conditioner at the following settings for 2 to 3 hours. • Type of operation : Cooling. • Temperature setting : 30°C. This will dry out the internal mechanisms. Remove the batteries from the Remote Control. Turn off the circuit breaker. CAUTION Turn off the circuit breaker when the air conditioner is not going to be used for a long time. Dirt may collect and may cause a fire. Clean the air filters, re-insert, then operate the air conditioner. Be sure that nothing obstructs the air outlet and intake vents.

This is not good for your health and wastes electricity. Avoid opening doors and windows as much as possible to keep the cool air in the room.

Do not let direct sunshine enter the room when the air conditioner is in operation. Blockages in the air filter reduce the airflow and lower cooling and dehumidifying effects. Clean at least once every two weeks.

Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in the room. Since windows are kept closed, it is a good idea to open them and ventilate the room now and then.

Solid gray rectangular shape with no text, symbols, or discernible features.

Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center.

Case	Explanation	See page
Does not operate.	Have you made a mistake in timer operation?
	Has the fuse blown or has the circuit breaker been tripped?Is the power Switch at Off?Is the unit at the starting of Heating Operation?If yes, Hot-start is activating.Is the unit in the Deicing?If yes, wait for finishing the Deicing.	-
The room has a peculiar odor.	Check that this is not a damp smell exuded by the walls, carpet, furniture, or cloth items in the room.	-
It seems that condensation is leaking from the air conditioner.	Condensation occurs when the airflow from the air conditioner cools the warm room air.	-
Air conditioner does not operate for about 3 minutes when restarted.	This is the Protection device of the air conditioner Wait about three minutes and operation will begin.If the airflow begins before its temperature become warm, it will cause an undesired cooling effect. In order to prevent this, the airflow will not begin until it is sufficiently warm.
Does not cool or heat effectively.	Is the air filter dirty? See air filter cleaning instructions.	20
	The room may have been very hot when the room air conditioner was first turned on. Allow time for it to cool down.	-
	Has the temperature been set incorrectly?Are the indoor unit's air inlet or outlet vents obstructed?	-
The air conditioner operation is noisy.	For a noise that sounds like water flowing.This is the sound of freon flowing inside the air conditioner unit.For a noise that sounds like the compressed air releasing into atmosphere.This is the sound of the dehumidifying water being processed inside the air conditioning unit.	-
Remote controller display is faint, or no display at all.	Are the batteries depleted?Are the batteries inserted in the opposite (+) and (-) directions?	8

NOTE

WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.

The indoor side is not water resistant and should not be exposed to excess water.

Two adjacent gray rectangular blocks with no text, numbers, or symbols.