Action 802 U86-IB2-Pe - Vacuum Cleaner VAX - Free user manual and instructions

USER MANUAL Action 802 U86-IB2-Pe VAX

Project: Action 802 Eco UG	Job No: J2543 Model No: U86-AB	Proof No: 2 Designer: Pete M PM: Sophie Size (HxW): A5
16 No. of pages	CMYK & Spots used correctly	All links are high resolution	Kerning check	Artwork packaged/Hi-res PDF
Logo correct size	Icons consistent (if used)	Cutterguide correct	No double spaces	Low-res/web ready PDF
Brand style consistent	Correct photography used	Spell check completed	No widows	Mock up produced (if required)

You're home."

2 year guarantee

3D rendering of a black and orange vacuum cleaner with handle, no visible text or symbols

U86-AB-Be / U86-AB-Pe / U86-AB-Re

vax.co.uk

Let's talk safety Let's talk safety

!

Basic safety precautions

This vacuum cleaner is intended for household use only and NOT for commercial or industrial use

• Only use the vacuum cleaner indoors on dry surfaces and keep the area you're cleaning well lit
• Keep fingers, hair and loose clothing away from moving parts and openings whilst using the vacuum cleaner
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
- Only Vax recommended tools should be used with this vacuum cleaner.

Please keep instructions for further use.

X

Don'ts

✗ Don't use this vacuum cleaner if it has been dropped, damaged or left outdoors
✗ Don't run over the power cord or use vacuum cleaner if the power cord or plug is damaged. Please contact our Customer Care Line on: 0330 026 8455 (Mon-Fri: 8.30am to 6.30pm, Sat: 9.00am to 5.00pm)
✗ Don't handle the plug or use the vacuum cleaner with wet hands
✗ Don't vacuum up any flammable or combustible materials (lighter fluid, petrol, kerosene etc.) or use the vacuum cleaner in an area with explosive vapours or liquid

✗ Don't vacuum up hot coals, cigarette butts, matches or smoking hot burning items or use in an area where there may be harmful fluids (chlorine, bleach, and ammonia drain cleaner)
✗ Don't attempt to remove blockages with sharp objects as this may cause damage to your vacuum cleaner
✗ Don't vacuum up hard or sharp objects such as glass, nails, screws or coins etc
✗ Don't use the vacuum cleaner with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label.

√

Do's

√ Turn off all controls on the vacuum cleaner before disconnecting or connecting the power cord
√ Always keep the power cord away from the brushes whilst using your vacuum cleaner. After use always wrap the power cord around the cord clips provided
√ Always make sure both the pre-motor/post motor filters are in place before use
√ Always switch off the vacuum cleaner before disconnecting or connecting the hose and accessories

√ Keep all openings clear and free from debris as this may affect the airflow/suction
√ Always replace the fuse in the plug with a British 13amp fuse. Always protect the power cable from heated surfaces and open flames
√ Use only CE approved 13amp extension cords, non-approved extension cords may overheat. Care should be taken to arrange the extension cord as it could be a trip hazard

Thank you for buying this Action 802.

Taking care of your carpets

The Action 802 is designed to make vacuuming carpets regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets will ensure they keep their appearance for longer. You've chosen carpets for your home for a reason and Vax will help you take good care of them.

Taking care of your Action 802

Also inside this guide are instructions on maintaining your new machine, so that it's always ready when you are to tackle your carpets.

Taking care of you

We're here if you need us. Instead of taking me back to the shop, simply visit:

vax.co.uk/support or cal.

(UK) 0330 026 8455 (ROI) 1-800 928 308

Monday-Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm

Sales are charged at the UK local rate. Before you call we'll need you to have the following information to hand: your machine, your proof of purchase or warranty registration code.

Alternatively, you can write to us at:

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK

This user guide can also be found online at: vax.co.uk/support

Let us know what you think @VaxUK

Contents

Let's talk safety

Getting to know your machine

Getting started

Using your machine

Taking care of your machine

Let's talk technical

What to do if it goes wrong

Getting in touch

Notes

Initial Setup for normal operation

1. Use the base accessories.
   a. 5-year last house
   b. Extension tube set to shortest practicable length.
2. Czar Flares recalled.
3. Dust receptacle empty
4. All Bleeds must be closed.
5. Floor heads/tools set to Carpet Mode for carpet cleaning.
6. Mechanica Aktion turned ON for carpet cleaning.
7. Floor headstools set to hard floor kinde for hard floor cleaning
8. Mechanical agitation turned OFF for hard floor cleaning

Action 802

Included with your machine

3 in 1co

Pre-motor filter

Post-motor filter

+ Action 802 Pet

TurocTool

Too connector

+ Action 802 Reach

3.2m Stretch hose

Getting to know your machine

Handic Extension tube Dirt container release button Hance release button Power on / off button Carry handlc Pro motor filter Quick release cord hook Separator Dirt container Hose Post-motor filter Hose to machine connector Carpet height adjuster

Technical Specification

Name Action 802 Series

Voltage 220-240V-50Hz

Wanage 750W

Cont length 8/10m

Weight 6.5kg

Accessories & Consumables

Filter Kit Type 98

1-1-134233-00

Salt Kit (Type 1)

1-1-130669-01

Pro Clearing Kit (Type 2)

1-1-133326-00

Turbo Tool Type 6

5 in 1 Tool

1-1-134419-00

Getting started

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE

Assembling your upright

Insert the back panel into the floorhead.

Inser, the lower cord hook into the hole at the bottom of the back panel.

Now take the small clip and push it down between the end of the cord hook and the machine, to lock the cord holder in place.

Place the dirt container or to the machine. Ensure the dirt container tape line up with the holes in the post motor filter cover.

Push the nose end into the hose to machine connector.

Ensure that the back of the dirt container connects to the inlet tube.

Place dirt container on machine and click into place at the back panel.

Insert the short end of the hose into the tube at the back of the machine and turn to lock.

Inset the handle into the top of the back panel until it clicks into place.

Atract TurboTool clip to the Handle. Snap TurboTool in a passion. ^4

Wrap the power cord around the quick release cord hook at the top and the lower cord hook, continue wrapping the power cord until it is secure.

Using your machine

Before you begin cleaning

• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachment, or removing and employing the dirt container.
• The vacuum cleaner is equipped with a thermo cut-out if for any reason the vacuum cleaner does overheat the motor will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from electrical socket. Remove and employ the dirt container also check the vacuum cleaner for shortages. Allow the vacuum cleaner to cool for approximately 1 hour (ft you have cleaned the filters please wait 24 hours for the tiles to fully dry before pulling back into the vacuum machine).
• Filters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.

Push the quick release cord hook to one side to release the power cord

Turn the he gnt adjuster c al backwards for the carpet setting.

Turn the height adjuster dial forwards for the hard floor selling the floorhead will tilt forward.

Push the on/off switch to turn machine or

Place your foot gently on the floorhead and put the handle backwards to recline the machine.

Using accessories

Remove hose end from the floorhead.

Choose an accessory.

Attach accessory adapter to hose end.

If required use too connector

Taking care of your machine

Emptying and cleaning the dirt container

Press dirt container release but on to remove the dirt container.

Hold the dirt container over a bir and undip the lock on the bottom of the dirt container, allowing the dirt to fall out.

Close the base of the dirt container and click the dirt container back on to the back panel.

Cleaning the pre-motor filter

Place fingers under the catch of the dirt container lid and pull to release it.

The Id will lift on a hinge. Use the lab on the filter to pull the filter out of it's housing.

Tap the filter over a bin to release dirt.

Wash the filter under running water (40 degree max).

I leave to fully dry (or a least 24 hours before placing back in the machine.

Taking care of your machine Let's talk technical

Cleaning the shroud

Place fingers under the catch of the bin to dirt container lid and pull to release it.

Remove the pre-motor filter to allow access to the shroud.

Tap the shroud over the bin to release dirt.

Wash the shroud under running water and leave to dry. The shroud will need to be placed back correctly.

HEPA post-motor filter maintenance

The exhaust filter is designed to offer long life with no maintenance. The filter should be checked periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the filter as this will damage the delicate filter media.

Press dirt container release button to remove the dirt container.

Remove the exhaust cover by turning it counter clockwise and lifting it off. To find the post-motor filter.

Remove the filter.

Check the post-mc.or filter for discolouration.

IMPORTANT Always switch off and enough the vacuum cleaner before carrying out only maintenance.

Removing debris from the brushbar

Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar.

Removing blockages from the TurboTool*

Remove the rubber ring, Detach lower housing and remove blockages.
Using a pair of scissors cut any hair or debris free from around the brushes.
line up the labs or front of housing and push together to re fit. Slide the rubber ring into groove to secure.

Vacuuming the stairs

Ensure that the vacuum is upright at the top or bottom of the stairs while vacuuming. Do not lean on the machine while using the hose.

Let's talk technical

Accessories

Changing the belt

Switch off your vacuum cleaner at the main socket and unplug. Remove the 4 screws on the bottom of the floorhead.

Squeeze the sides of the floor plate to release it.

Remove the floor plate.

Remove the bell cover.

Lift the brush from the machine starting at the side without the belt on.

Unhook the belt from the motor spindle in the belt compartment. (This may be easier if you use a screwdriver to do this).

Place the new outlet around the brush bar.

Feed the other side into the belt compartment.

Using a screwdriver, hook the belt onto the motor spindle.

Reinsert the brushbar. One end of the brushbar has a square slot, and one end has a circular slot, ensure that it is put back into the correct position.

Don't forget your accessories!

Order at: www.vax.co.uk/spares-and-solutions

Pro cleaning kit

1-1-133326-00

All our best tasks all in pre-till that makes cleaning your home quicker, easier and with even better results. We've taken care for cleaning at the head to reach areas such as on top of cupboards and in between. Binds to the dust that colates behind and within the direction

Flexi Crevice Tool

1-1-131393-00

A handy long, flexible load for getting but behind and around furniture.

TurboTool (Type 6)

1-1-134419-00

Use the TurboTool for vacuuming your stairs, upholstery and can interior. It's great for picking up sluckarm pot hair.

Flat Upholstery Tool

1-1-131394-00

Clears large areas of upholstery like stars and clouds quickly and effectively.

3 in 1 Tool

1-1-129167-00

3 in 1 look includes a voice too, or awkward cross and corne, dusting brush for arcs such as skin ring and an upholstery tool for cleaning sales, curtains, chair seals and car interiors.

What to do if it goes wrong

Problem

Why won't the vacuum cleaner turn on?

Solution

• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing always replace with a 12amp fuse.
• The motor thermostat may have ripped. If this has happened, unoug the vacuum cleaner. Remove and empty the dirt container and check the hose for oloccages. Clean the filters and allow the vacuum cleaner to cool for approximately 1 hour if you have washed the filters you will need to wait 24 hours for the filters to fully dry before putting them back into the vacuum cleaner?

Why won't the vacuum cleaner pick up?

• There may be a blockage in the hose. Please remove the hose from the vacuum cleaner, check and clear any blockages.
  • Empty the dirt container and clean filters. Go to 'Taking care of your machine'.
• The brushbar may no, be turning. Go to 'My brushbar isn't turning?' below.
  • If the accessory/too will not pick up, check and clear any blockages.

My brushbar isn't turning?

• The brushbar may be trimmed. If this happens then the machine needs to be switched off immediately to avoid damage. To remove debris from brushbar refer to page.
• The bell might not turn off it is broken. To check the bell, go to 'Changing the bell'.

What if my vacuum cleaner is making an excessive noise?

• The vacuum cleaner, is making a whistling noise, please remove the dirt container open the bottom and clean the seals. Replace the dirt container and retry.
• If there is air sucking noise from the too of the dirt container, this would indicate a blockage in the machine Go to "Why won't the vacuum cleaner pick up" above.

There is an accessory missing?

- Check the 'This park contains' panel on the box to make sure the part is included with your machine.

CAUTION: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance /troubleshooting checks.

Getting in touch

It's quick and easy to register for your FREE

2 year guarantee

Online at: vax.co.uk/guarantees

Please retain your original receipt for proof of purchase.

we're here if you need us

Online vax.co.uk/support

Call (UK) 0330 026 8455 (ROI) 1-800 928 308

Monday-Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm*

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK

* Cals are charged at the UK local rate. Please make a rope of the serial number and model number of the vacuum cleaner before calling.

You're home."

@VaxUK

Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: [e-mail] website: vax.co.uk

Version 1.0

EEC Statement of Compliance: Manufacturer/EEC importer: Vox Limited, hereby on our own responsibility, declare that the U86-AB-Be/U86-AB-Pe/U86-AB-Re is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

© 2014 All rights reserved. VAX®, VAX Lozenge, are trade marks or registered trade marks of Techtronic Floor Care Technology Ltd.