TM8350R - Cooker Tot Mate - Free user manual and instructions
Find the device manual for free TM8350R Tot Mate in PDF.
User questions about TM8350R Tot Mate
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Cooker in PDF format for free! Find your manual TM8350R - Tot Mate and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TM8350R by Tot Mate.
USER MANUAL TM8350R Tot Mate
text_image
TOT mate.by Stevens Industries, Inc.
704 West Main St.
Teutopolis, IL 62467
P: 800.350.3270
P: 217-857-7100 • F: 217-857-7101
www.totmate.com
TM8350R
TM8352R
ATTENTION
Please unpack and assemble in an area away from children's activities. Remove all tools and excess materials from work area after assembly of unit is complete. Dispose of pallet and packaging materials in an environmentally friendly manner. If any parts are missing or damaged, please call Stevens for immediate parts replacement (1-800-350-3270). When ordering parts, give the Model Number and Color of the unit.
CAUTION - CHOKING HAZARD
Adult assembly required due to presence of small parts and sharp edges.
IMPORTANT!
Assembly must be securely attached to building structure with anchoring devices of appropriate type, size and quantity in accordance with applicable codes and accepted installation practices.
NOTE: ASSEMBLY INSTRUCTIONS REFERENCE ILLUSTRATIONS AND PART NUMBERS FOR THE TM8352R.
natural_image
Wooden cabinet with a white top and wooden panel, no visible text or symbolsTM8350R
Single Floor Vanity
Parts List
| ITEM | QTY | PART # | DESCRIPTION |
| 1 | 2 | 41XX-1501 | End U |
| 2 | 1 | 82XX-0252 | Access Panel |
| 3 | 4 | 61XX-0640 | Rail-TK-Supt |
| 4 | 4 | 0861-0338000000 | Nut Propell 1/4 20x.5 5/8Flang |
| 5 | 4 | 0861-0032000000 | Screw Mach PhTr Zn 1/4-20x1.50 |
| 6 | 8 | 0861-0203000000 | Screw Conn HxDc Ni 7mmx 50mm |
| 7 | 1 | 0661-1259000000 | Fauc PEER P241LF Lav 4" |
| 8 | 1 | 0660-2708000000 | Sink Sng CDE3122SPW 21x31 Wht |
| 9 | 1 | 0661-0008000000 | Plb g Strainer Flat D70-100 |
natural_image
Wooden bathtub with two white sinks and a matching front panel (no text or symbols visible)TM8352R
Double Floor Vanity
Parts List
| ITEM | QTY | PART # | DESCRIPTION |
| 1 | 2 | 41XX-1501 | End U |
| 2 | 1 | 82XX-0253 | Access Panel |
| 3 | 4 | 61XX-0641 | Rail-TK-Supt |
| 4 | 2 | 61XX-0649 | Rail-Xsupt |
| 5 | 4 | 0861-0338000000 | Nut Propell 1/4 20x.5 5/8Flang |
| 6 | 4 | 0861-0032000000 | Screw Mach PhTr Zn 1/4-20x1.50 |
| 7 | 1 | 0660-2709000000 | Sink Dbl DDE4922SPW 21x49 Wht |
| 8 | 2 | 0661-1259000000 | Fauc PEER P241LF Lav 4" |
| 9 | 2 | 0661-0008000000 | Plbg Strainer Flat D70-100 |
| 10 | 8 | 0861-0203000000 | Screw Conn HxDc Ni 7mmx 50mm |
| 11 | 4 | 0861-0205000000 | Screw Conn HxFI ZN 7mmx 50mm |
STEP-BY-STEP ASSEMBLY
ILLUSTRATIONS AND PART NUMBERS ARE FOR TM8352R. BASIC ASSEMBLY INSTRUCTIONS ARE THE SAME FOR BOTH MODELS. 2-PERSON ASSEMBLY RECOMMENDED.
IMPORTANT! Be sure to keep all parts supported during assembly to avoid damage. Do not over-tighten screws or it will damage the pre-drilled holes; snug fit is adequate.
HARDWARE / TOOLS INCLUDED
(Phillips screwdriver and soft mallet required but not included.)
Confirmat Bolt (10) (Screw Conn HxDc Ni 7mmx50mm)
Flat Head Confirmat Bolt (11) (Screw Conn HxFl ZN 7mmx50mm)
Access Panel Nut (5) (Nut Propell 1/4 20x.5 5/8Flang)
Access Panel Screw (6) (Screw Mach PhTr Zn 1/4-20x1.50)
text_image
DESCRIPTION| TM8352R Parts List | |||
| PART #QTYITEM DESCRIPTION | |||
| 41XX-150121 | End U | ||
| 82XX-025312 | Access Panel | ||
| 3 | 4 | 61XX-0641 | Rail-TK-Supt |
| 61XX-064924 | Rail-Xsupt | ||
| 0861-03380000004Nut Propell 1/4 20x.5 5/8Flang | |||
| 0861-00320000004Screw Mach PhTr Zn 1/4-20x1.50 | |||
| 0660-27090000001Sink Dbl DDE4922SPW 21x49 Wht | |||
| 0661-12590000002Bauc PEER P241LF Lav 4" | |||
| 0661-00080000002Plbg Strainer Flat D70-100 | |||
| 0861-02030000008Strew Conn HxDc Ni 7mmx 50mm | |||
| 0861-02050000004Strew Conn HxFl ZN 7mmx 50mm | |||
STEP-BY-STEP ASSEMBLY
Construct two Rail Supports as follows:
a. Insert dowels on ends of one X Rail (4) into holes in center of two TK Rails (3). Make sure holes in ends of X Rail (4) align with thru-holes in TK Rails (3). Press firmly into place.
text_image
③ ④ ③ thru-holeb. Secure Rails (3 & 4) from (a.) together with two Flat Head Confirmat Bolts (11), using the included Hex Wrench.
text_image
Technical diagram of a structural frame with numbered components and directional arrows indicating assembly or movement.c. Repeat (a.) and (b.) to construct other Rail Support.
FOR BOTH MODELS (STEPS 2-13):
STEP 2
Lay one End (1) flat on floor, with side having the most holes facing up. NOTE: Holes are closer to back edge and further from front edge.
text_image
front edge ① back edgeSTEP 3
Insert dowels on TK Rails (3) into holes on End (1). (For TM8352R, TK Rails (3) are part of the Rail Supports from Step 1.) Top edges of all TK Rails (3) must be facing same direction. Press firmly into place.
text_image
top edges of TK Rails (3) (to identify, note location of holes on faces) ①STEP 4
Position other End (1) on top of assembly, so dowels on TK Rails (3) align with holes on End (1) and back edges of both Ends (1) are facing same direction. Press firmly into place.
text_image
① back edge ③ ③ ③ ③ back edgeSTEP-BY-STEP ASSEMBLY
STEP 5
Secure End (1) to TK Rails (3) with four Confirmat Bolts (10).
text_image
① ③ ③ ③ ⑩STEP 6
Carefully turn assembly over, so other End (1) is facing up.
natural_image
Isometric line drawing of a multi-level cabinet or storage unit with no text or symbolsSTEP 7
Repeat Step 5 to secure End (1) to TK Rails (3).
text_image
Technical diagram of a multi-level cabinet or storage unit with numbered components and directional arrows indicating assembly or movement.STEP 8
Carefully position assembly with front facing up.
natural_image
Isometric line drawing of a rectangular metal enclosure with vertical supports and mounting holes (no text or symbols)STEP 9
Insert Access Panel Nuts (5) into both holes on each front TK Rail (3), with flange exposed to interior of cabinet. Tap Access Panel Nuts (5) into place with soft mallet.
text_image
flange ⑤ ③ ③STEP-BY-STEP ASSEMBLY
STEP 10
Position Access Panel (2) over assembly, so holes on Access Panel (2) align with Access Panel Nuts (5). Press firmly into place.
text_image
Technical diagram of a two-tiered metal enclosure with labeled components ② and ⑤STEP 11
Secure Access Panel (2) to front TK Rails (3) with four Access Panel Screws (6). (Phillips screwdriver not included.) NOTE: The Access Panel can be removed as needed for plumbing access.
text_image
Technical diagram of a rectangular enclosure with numbered components and dimension linesSTEP 12
Carefully stand unit upright.
natural_image
Isometric line drawing of a rectangular metal enclosure with internal compartments and mounting holes (no text or symbols)STEP 13
Ensure that all joints, bolts and screws are tight.
This completes the assembly of the cabinet.
Installation of Sinks (7), Faucets (8) and Strainers (9) to be performed by licensed plumber.