LE50K9000UA - TV HAIER - Free user manual and instructions

USER MANUAL LE50K9000UA HAIER

Line drawing of a modern Haier TV displaying flat-screen screen with no text or symbols on the screen itself.

LED Television

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .... 1

PRECAUTIONS AND REMINDERS.... 2

PREPARATION 3

PERIPHERAL CONNECTION AND CONTROLS 4

MAKING CONNECTIONS.... 5

OPERATING INSTRUCTIONS 6

TROUBLESHOOTING 17

PRODUCT SPECIFICATION....18

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install in accordance with the instructions.

8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Unplug this apparatus during lighting storms or when unused for long periods of time.

13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

15) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.

16) No naked flame sources, such as lighted candles, should be placed on the apparatus.

17) Attention should be drawn to the environmental aspects of battery disposal.

18) The use of apparatus in moderate climate.

19) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol indicates that there are important operating and maintenance instructions in the literaturaccompanying this unit.

WARNING:

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

WARNING:

The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Illustration of a computer monitor with an electrical circuit and a hand holding a device (no text or symbols)

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

Simple line drawing of a window with a diagonal X mark and a hanging cloth, no text or symbols present.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Simple line drawing of a computer monitor with a cross symbol and stars (no text or labels)

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Simple line drawing of a computer monitor with a base, emitting steam (no text or symbols)

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Simple line drawing of a flat-screen monitor mounted on a stand with a diagonal line crossing (no text or symbols)

Do not trap the power supply cord under the television receiver.

Computer monitor displaying three prohibition symbols: no restrictions, no trash, and a document.

If you are going to clean the product, Unplug the TV, use soft fabric, no water, never chemicals.

Cartoon depicting a person running away from a computer screen with a crossed-out 'No' symbol, indicating no violation or rejection.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.

Simple line drawing of a geometric shape with a horizontal base and a vertical line, no text or symbols present.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it falls.

Illustration of a person running away from a computer screen next to a broken circular object (no text or symbols)

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Simple line drawing of a monitor with a cross mark and a megaphone emitting sound waves (no text or symbols)

Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television.

Minimum distances 10cm 20cm 10cm 5cm

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

Note: the use of apparatus in moderate climates.

IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer's warranty does not cover user abuse or improper installations.

ATTACHING THE STAND

IMPORTANT: The stand of the TV must be assembled prior to usage.

1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.

2. Fix the stand to the bottom of the TV with the four M4 X 16 mm screws.

M4x16 mm (4pcs )

NOTE

The appearance of the product shall be in kind.

PREPARING YOUR LCD TV FOR WALL MOUNTING

We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the stand.

For your safety, please use only with a UL listed wall mount bracket with minimum weight of the TV without stand. (Please see page 18 for the weight of the TV.)

To attach a wall mount bracket to your TV:

1. Remove the screws holding your TV to the stand.

2. Remove the stand from your TV.

3. Secure the wall mount bracket to the back of your TV using four screws (see page 18 for the size of the screws). Follow the instructions of the user manual that came with the wall mount bracket to install.

Pure technical diagram of a room layout with no text, numbers, or symbols

NOTE

The wall mount bracket are not included.

TURNING ON THE TV

1. Install the stand and place the TV on a solid surface.

Diagram illustrating a lighting experiment setup with a power source, screen, speaker, and light sources labeled with minimum distance of 1 meter.

NOTE

- Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.

- To prevent any unsafe situations, no naked sources, such as lighted candles, should be placed on or in the vicinity.

- Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.

1. Connect the antenna cable or cable TV cable to the ANT IN aerial socket on the back of the TV set. See "CONNECTING TO AN ANTENNA/CABLE WALL JACK" on page 7.

2. Remote control:

Remove the cover of the battery compartment. Insert the 2 supplied batteries (Type AAA 1.5V).

Diagram showing three views of a device with battery and switch components, no text or symbols present

1. Power:

Plug the cord into a working power outlet.

Line drawing of a flat-screen TV with cable and connectors, no text or symbols present

1. Turn the TV on:

Press on the remote control or POWER button on the side control panel of the TV.

BUTTON CONTROL ACCESSORIES

Technical line drawing of a rectangular enclosure with internal components and mounting holes (no text or symbols)

BUTTON

TV 50"/55"/58"/65"

Remote Control - 1pcs

AAA Battery - 2pcs

User's Manual - 1pcs

Quick Start Guide - 1pcs

Warranty Card - 1pcs

Screws - 4pcs

Middle key

In the standby mode, press the middle button to turn on the TV. In the boot state, long press the middle button to shut down. Under the menu page, function equivalent to the OK key.

Left and right keys

In the non-menu page, Under the menu page, press the left and right keys to adjust the volume addition and subtraction.

Up and down keys

In the non-menu page, you can adjust the TV channel under the program addition and subtraction; Under the menu page, you can move the cursor up and down.

PERIPHERAL CONNECTION

OPTICAL USB1 RJ45 HDMI1 HDMI2 HDM3 VIDEO L R

All the terminals are(from left to right): OPTICAL, USB1, RJ45, HDMI1, HDMI2, HDMI3, VIDEO, L, R

ITEMS INCH USB IN [START] IN ANT IN (VAN LXXXIN) IN COMMON INTERFACE (CI) MINI VYAP: SARPHONE TF USB2

All the terminals are(from left to right): HDMI4(ARC), LNB IN(SATELLITE), ANT IN(ANTENNA/CABLE), CI, MINI YPbPr, EARPHONE, TF, USB2.

You can use the input terminals on TV set rear as follows.

OPTICAL USB1 RJ45 HDMI1 HDMI2 HDMI3 VIDEO L R Amplifier Audio/Video machine with HDMI interfaces CVBS, DVD Player or other machine with CVBS/S-Video.

HDMI4 (ARC) LINS IN (SATELLITE) ANT IN (ANTENNA/CABLE) COMMON INTERFACE (CI) MINI YPDPT EARPHONE TF USB2 Audio/Video machine with HDMI interfaces CVBS,DVD Player or other machine with YPbPr/YCbCr. W White(AUDIO-L) R Red (AUDIO-R) Y Yellow (VIDEO)

1. HDMI: Connect to High-definition multimedia signal resource.
2. USB: Connect USB device.
3. YPbPr: Component input terminal.
4. RF: Antennal/close circuit TV
5. AV INPUT: Video input/Audio input.

USING THE REMOTE CONTROL

1 2 3 4 5 6 7 8 TEXT FAV SUBTITLE SOURCE 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 VOL INFO CH GUIDE CH LIST 0 AUDIO Haier HTR-U27E

# Item		Descriptions
1	Power	Press to turn the TV on or off. When your TV is off, power still flows through it. To completely disconnect power, unplug the power cord.
2	MUTE	Press to switch the sound on or off.
3	Google Assistant	Press to open the google assistant or start a voice search.
4	◀(reverse)	Press to reverse playback in multimedia & Timeshift mode.
5	▶(play)	Press to play in multimedia mode &Timeshift mode.
6	▶(forward)	Press to fast forward in multimedia &Timeshift mode.
7	● (REC)	Press to record the TV program you are watching in DTV mode.
8	II(Pause)	Press to pause in multimedia mode&Timeshift mode.
9	■(stop)	Press to stop multimedia playback, REC& Timeshift mode.
10	TEXT	Press to select the teletext mode.
11	FAV	Press to open a favorite channel list.
12	SUBTITLE	Open or close subtitle.
13	SOURCE	Press to open the input source list.
14	NFTFLIX	Press to open the NFTFLIX.
15	YouTube	Press to open the YouTube.
16	HOME	Press to open the Home Page.
17	MENU	Press to open or close the on-screen menu.
18	▲▼◀▶	Press to navigate the on-screen menu.
19	OK	Enter the selected option or perform the selected operation.
20	BACK Return to the previous menu.
21	EXIT It depends on the actual function
22	INFO	Press to display the channel information.
	GUIDE23	Press to display electronic programme guide in TV mode.
24	VOL+/VOL-	Press VOL+ or VOL- to adjust volume level.
25	CH+/CH-	Press CH+ or CH- to change TV channels.
26	0~9 number	Press to enter a TV channel number
27	CH.LIST	Press to display the Channel List.
28	AUDIO	Press to select Mono,Nicam,Stereo for ATV channel,Audio language for DTV channel.
29	Coloured buttons	Implement the relevant operations according to the prompt at the botton of the menu in the text

INITIAL SETUP

The first time you turn on your TV, the setup wizard will guide you through setting up basic settings. Please according to the Text Tip to First Time Setup.

Searching for accessories... To enable Google Assistant mt on your ownie control, press and hit Red button and Blue button simultaneously for 3 seconds. Then press "OK" button when the Haser WRC displays in the upper right corner of set screen. If peeling to unsuccessful, press next a few minutes and try again. Press OKT to exit accessory adding 5s

This function is used for the remote control pair code. After the code is successful, you can use the Bluetooth remote control to operate the TV.

Welcome English Catalá Čiština Dansk

Press to select the system language and press OK to confirm the language.

Quickly set up your TV with your Android phone? You can easily transfer your Android phone's Wi-Fi network and Google Account to your TV

Connect your Android phone to your TV, select "Continue" to continue the connection, and choose "Skip" to skip this step.

Select your Wi-Fi network You can also connect an Ethernet cable to connect to the internet. 2020 ChinaNet Wepx server netgear 5G

Press ▲/▼ to select the wifi to connect, press OK and enter the password to confirm the connection is successful.

Google Terms of Service By continuing, you agree to the Google Terms of Service, the Google Privacy Policy, and the Google Play Terms of Service. This device may also receive and install updates and apps from Google, your device's manufacturer, or your operator. Some of these apps may offer optional in-app purchases. You can remove them or adjust their permissions at any time from the device settings. Google also collects and temporarily stores the voice and audio history from microphoneuse to improve the product experience.

By accepting the Google Terms of Service to improve the product experience, select "Accept" to accept this condition.

Google Location Let Google see your device's location to improve your experience. Certain application or platform capabilities, such as streaming local content or tire programming, may require your device's location to function correctly. You may choose whether to share this information with a third party app at the moment that app is installed or run. You can adjust these permissions at any time from Settings.

Agree to Google to get the location information of your device to get more features, choose "YES" to accept.

Google Help improve Android Automatically send diagnostic information to Google, like crash reports and usage data from your device, apps, and Chromecast built in... This information won't be used to identify you. You can adjust these permissions at any time from device settings. Learn more at: g co/ AndroidUsageHelp and c co/cast/device_stats.

By agreeing to automatically send diagnostic information to Google to improve discriminative power, choose "YES" to accept.

Your hair/ATV is powered by android TV Get apps from Google Play Google Play Cast to your TV

1. Your device is powered by Android TV and press the ▶ button to select the browsing feature.
2. You can get more apps from Google Play and press the ▶ button to go to the next screen.
3. Transfer photos and other content to the TV via the built-in chromecast, press OK to complete the browsing.

Google Country/Region Please select your country/region India Pakistan Russia Kazakhstan Uzbekistan Ukraine

Press ▲to▼elect the country of your device and press OK to confirm.

Google Password Please set password. '3000' is invalid. input Password

Used to set your device's password to ensure security and privacy.

Google Input Password New Password ...

Press OK to pop up the soft keyboard, and use the remote control to enter the 4-digit password automatically jump to the next interface.

Google Confirm Password Confirm Password ....

Confirm the password again and keep it consistent. Use the remote control to enter the password and complete the password confirmation.

Google Select TV mode "Home" mode is optimized for efficient energy usage for home use. "Retail" mode is optimized for above domes with Klead settings. HOME Retail

For selecting the mode, press ▲key to select Home mode and press OK to confirm.

Google Select Home mode? If you plan to use this TV at home, please select "Yes" to proceed. Yes No

Confirm the selected mode again, select "Yes" to confirm the selected mode, and select "No" to return to the previous step.

Google Tuner Mode Please select your tuner mode: Antenna Cable Satellite

To select the Tuner mode for searching, press ▲/▼ to select and press OK to confirm.

Google Scan Channel Scan First, please connect antenna. Start channel scan now? If you skip this step, the channel scan could be performed in Menu. Skip Scan

Press ▲to select whether to search, select "Scan" to search, select "Skip scan" to skip the search.

Google Setup is completed. Enjoy! Congratulations! Completed Initial Setup. Please press [ENTER] to exit this wizard. FINISH

Press OK to complete the setup.

Disclaimer We lead the market in chipset technology for Smart TVs, Voice Assistant Devices (VAD), Android tablets, feature phones, Optical and Bu-ray DVD players, and we're number two globally in mobile phones. Accept We build chips that are less about connecting people to their devices and more about connecting your devices to what matters. Connecting to the things that shape our lives, makes us smarter, healthier and improve everyday life. At Haier, our technology is built with humans in mind to enhance and enrich life. We believe technology has to be great – not expensive. And great technology should be accessible to everyone. Haier wants to make the world a more inclusive place, where smart and connected is an equal opportunity. That's why Haier works with the brands you love and gives our partners and their customers feature rich, premium technology at affordable mass-market prices. We power possibility for the world's billions of people to explore their true potential – their Everyday Genius.

Press the OK button to agree to Disclaim (Disclaimer). After setting is complete, You can watch TV.

NOTE

During initial setup, press EXIT to exit the initial setup.

HOME SCREEN

During initial setup, press EXIT to exit the initial setup, and enter the HOME screen.

Search movies. TV and more Apps Netflix YouTube NETFLIX Netflix ALL TIIE DOMDC 5:49

① Open the google assistant or start a voice search.

② Among the applications installed on the TV, the icons for the favourite applications are shown inside here. (Favourite applications can be added / deleted / changed its order by users.)

Apps: Click to jump to Apps screen where all the installed applications are listed.

③

④ Notification: Display the notifications.

Inputs: Icon to select an input source.

Network&Interent: Icon to Set up Network, Such as wifi.

Settings: Various settings can be configured here.

For details on the settings, see the next explanation.

INPUT SOURCE

1. In the HOME interface, press ▲/▼ ◀/▶ to select the "Inputs" icon, press OK to open the input source list, then press up to highlight an input and press OK to switch.

2 Inputs Details Disrr

Inputs Channels High: 1 Low: 2 Medium: 3 Medium: 4 Cancerebrack Composite

1. Under live TV, press the SOURCE button to display the list of input sources. You can select the desired source.

Main TV Composite Component HDMI 1 HDMI 2 HDMI 3 HDMI 4

NAVIGATING THE ON-SCREEN MENU

1. There are two ways to enter. First, in live TV, press the menu button to display TV options, press ▲/▼ ◀/▶ to select the settings menu and press OK to confirm. Second, in the HOME interface, press the ▶ key to select the icon of the circular settings menu, press OK to confirm.

Channels TV options Speakers Power G Card Round-Up Advanced Series Settings Record

11:42 Settings Details Dismiss

1. Press button to select what you want set.

2. Press OK to enter setting.

Settings Quick Settings Take bug report General Settings Network & internet No network connected Channel Accounts & sign in No accounts Apps Device Preferences Remoies & accessories

Press BACK to return to the previous menu. If the main menu is displayed, pressing BACK will close the onscreen menu.

Network

1. Press ▲ button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment, Press OK button to save and return to the previous menu.

Network & Internet Wi-Fi Available networks 3686 ChinaNet-Wepx iServer-CT3 See all Other options Add new network Scanning always available Let Google's location service and other apps scan for networks, even when Wi-Fi is off

Network & Internet HIND NEW NETWORK Scanning always available Let Google's location service and other apps scan for networks, ever when WiFi is off Wow wake on wireless network Wol wake on LAN Ethernet Not connected Proxy settings IP settings

CHANNEL

Channel Channels Channel Installation Mode Antenna AutoChannel Update Parental Controls Audio Channel Oper Source Licenses Version 2.28.5646 18321972

Channels – Display the scan sub-menu based on different Channel installation modes.

Channel installation mode – Select on-screen display channel sources. You can select the signal type.

• Antenna – Set the signal type to antenna. When set to Antenna, the TV can receive analog and digital (DVBT/T2) broadcasting signals.
• Cable – Set the signal type to cable. When set to Cable, the TV can receive analog and QAM broadcasting signals
• Satellite – Set the signal type to Satellite. When set to Satellite, the TV can receive Satellite broadcasting signals.

Auto Channel Update

Parental controls - Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Audio Channel – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Open source licenses – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Antenna

Channel Installation Mode Antenna Cable Satellite

Channel Channels Channel Installation Mode Antenna Auto Channel Update Parental Controls Audio Channel Open Source Licenses Version 2.283 bued 10221512

1. Menu->Settings->Channel->Channel Installation Mode enter, choose Antenna.

Channels Channel Scan Update Scan Analog Manual Scan Single OF Scan LON Default Channel Scan Type All Channel Store Type All Favorite Network Select

1. Enter Menu->Settings->Channel->Channels.

Status: Scanning Analog Channels2 Digital Channels3 Antenna 3% Exit

1. Channel Scan directly enters the ATV+DTV automatic search platform interface of Antenna.

Update Scan: Re-automatically search for frequency points outside the station.

Search for Analog Channels Start Frequency (MHz) 47.96 Scan Up Scan Down

Analog Manual Scan: Manual ATV search station. After input the frequency point, you can select up or down search station.

Scan Single RF Channel. (Digital Only) Antenna Digital Channels 0% RF Channel Signal Level 0% Signal Quality 0%

Single RF Scan: DTV manual search, left and right after selecting RF Channel, directly OK search.

Cable

Channel Installation Mode Antenna Cable Satellite

Channel Scan LNC Others

1. Menu->Settings->Channel->Channel Installation Mode, select Cable.
2. Enter Menu->Settings->Channel->Channels.

Scan All Channels 0% Scan Mode Full Channel Scan Type Only Digital Channels Scan

1. Enter Channel Scan, where UPC is the local operator, and the default Scan Mode is Full; Others have Advance, Quick and Full Scan modes.

Scan Single RF Channel. (Digital Only) Cable Digital Channels: 0% Frequency (kHz) 306000 Score >> Signal Level 0% Signal Quality 0%

Single RF Scan: manual search station.

Satellite

Channel Installation Mode Antenna Cable Satellite

1. Menu->Settings->Channel->Channel Installation Mode, select Satellite.

Channels Satellite Re-scan Satellite Add Satellite Update Satellite Manual Tuning Favorite Network Select Channel Skip Channel Run Channel Move Channel Edit

1. Enter Menu->Settings->channel->Channels->Satellite Re-scan.

Satellite Re-scan Satellite Re-scan Disable+Disable+Disable On > Disable+Disable+Disable Off Disable+Disable+Disable Off Disable+Disable+Disable Off

Satellite Program Satellite Detail Satellite Status Satellite Name LNB Power LNB Frequency DSEqC Ser Tone 220Hz Tone Burst Transverse

Scan All Channels: Scan Mode Network Scan Type All Store Type All Scan

1. Press OK to enter Satellite parameter Settings, which include LNB POWER, LNB Frequency, DiSEqC Set, 22K and other parameters. Then return to Satellite re-scan and right click to enter the search menu. Then return to Satellite re-scan and right click to enter the search menu.

Satellite Add Satellite Add ***** Double+Disable+Disable Off

Satellite Add: Add a star broadcast signal.

Satellite Manual Tuning Satellite Manual Tuning ***** Disable+Disable+Disable On > ***** Disable+Disable+DISEqC A On > ***** DISEqC 1.2+Disable+Disable On > ***** Disable+Disable+DISEqC B On >

Satellite Manual Tuning: manually search for a certain TP, which can be added by Satellite Add if needed.

ACCOUNTS & SIGN IN

Couldn't sign in You don't have a network connection. This could be a temporary problem. Try again or connect to another Wi-Fi network.

APPS

Apps Recently spread apps Live TV 11 minutes app Google Play Store 14 minutes app Google Play Movies & TV 15 minutes app See all apps Permissions App permissions Special apps access

In this menu, you can set the APP permissions, and read the app lists

1. Press ▲/▼ button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment, Press BACK button to return to the previous menu.

DEVICE PREFERENCES

ABOUT

About System update Device name haserFV Restart Status Network, serial numbers and other information Legal information Model haserFV Version 9 Software version

In this menu, you can read the information and settings of TV.

1. Press ▲/▼ button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment, Press BACK button to return to the previous menu.

DATE&TIME

Date & time Automatic date & time Use network provided time Set Date: April 17, 2019 Set time: 8:30 AM Set time zone GMT+02:00 Central European Summer Time Use 24-hour format 3:00 PM

Automatic date & time – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

(Optional: Use network-provided time, Off)

NOTE

- Manually adjusting date & time settings will automatically change the Automatic date & time to OFF.

Set date – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Set time – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Set time zone – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Use 24-hour format – Press ▲/▼ button to select the option then press OK button to choose ON/OFF.

TIME

Timer Power On Timer Type Off Power On Timer 9:00 Power Off Timer Type Off Power Off Timer 9:00

Power On Timer Type – Press ▲ button to select the option then press OK button to choose ON/OFF/ONCE.

Power On Timer – Press ▲/▼button to select the option then press OK button to enter the sub-menu.

Power Off Timer Type – Press ▲/▼button to select the option then press OK button to choose ON/OFF/ONCE.

Power Off Timer – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

LANGUAGE

Language Català Čeština Dansk Deutsch English Español Français Hrvatski Indonesia

Language - Press ▲/▼button to select the option then press OK button to enter the select language.

KEYBOARD

Keyboard Current keyboard Gboard Gboard Settings Manage keyboards

Current keyboard – Press ▲ button to select the option then press OK button to enter the sub-menu.

Gboard Settings – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Manage keyboards – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

INPUTS

Inputs HDM 4 HDM 4 HDM 3 HDM 3 HDM 2 HDM 2 HDM 1 HDM 1 Composite Composite Component Component

Inputs Component Component Consumer Electronic Control (CEC) HDMI control Allow the TV to control HDMI devices Device auto power off Power off HDMI devices with the TV TV auto power on Power on the TV with HDMI device HDMI E2/D Version CEC 1.4 CEC Device List

Inputs - Press ▲ button to select the option then press OK button to enter the sub-menu.

HDMI control – Press ▲/▼ button to select the option then press OK button to choose ON/OFF.

Device auto power off – Press ▲/▼ button to select the option then press OK button to choose ON/OFF.

TV auto power on – Press ▲/▼ button to select the option then press OK button to choose ON/OFF.

HDMI EDID Version – show EDID version.

CEC Device List – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

POWER

Power Sleep Timer Off Picture off Switch off timer Off No Signal Auto Power Off 15 Minutes

Sleep Timer – Press ▲/▼button to select the option then press OK button to enter the sub-menu. (Optional: off, 10 minutes, 20 minutes, 30 minutes, 40 minutes, 50 minutes, 60 minutes, 90 minutes, 120 minutes).

Picture off - Press ▲/▼ button to select the option then press OK button to choose ON/OFF.

Switch off timer – Press ▲/▼ button to select the option then press OK button to enter the sub-menu. (Optional: off, 30 minutes, 60 minutes, 90 minutes, 120 minutes, 150 minutes, 180 minutes, 210 minutes, 240 minutes)

No Signal Auto Power Off – Press ▲/▼button to select the option then press OK button to enter the sub-menu. (Optional: off, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes).

PICTURE

Picture Picture Mode Standard Backlight 100 Brightness 50 Contrast 50 Saturation 30 HUE 0 Sharpness 10 Gamma middle

Picture Saturation 50 HUE 0 Sharpness 10 Gamma Middle Color Temperature HDR On Advanced Video Reset to Default

Picture Mode – Press ▲/▼button to select the option button to enter the sub-menu. (Optional: user, Standard, Vivid, Sport, Movie, Game, Energy saving).

Backlight/Brightness/Contrast/Saturation/HUE/Sharpness – Press ▲/▼ button to select the option. Press ◀to decrease the parameter. Press ▶ increase the parameter.

Gamma – Press ▲/▼button to select the option then press OK button to enter the sub-menu.(Optional: Dark, middle,Bright).

Color Temperature – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

HDR -Press ▲button to select the option the press OK button to enter the sub-menu.(Optional: on,off).

Advanced Video - Press ▲button to select the option then press OK button to enter the sub-menu.

Reset to Default – Reset all settings to the factory defaults.

SOUND

Sound Sound Style Standard Balance 0 Bass 50 Treble 50 Sound Surround Equalizer Detail Speakers External Audio System Digital Output PCM

Sound Sound Surrounds Equations Detail Speakers External Audio System Digital Output PCM SPDF Delay 0 Auto Volume Control Downmix Mode Stevs Reset to Default

Sound style – Press ▲/▼ button to select the option then press OK button to enter the sub-menu. (Optional: user, Standard, Vivid, Sports, M ovie, M usic, News).

Balance/ Bass/ Treble – Press ▲/▼ button to select the option. Press ◀ to decrease the parameter. Press ▶ to increase the parameter.

Sound Surround – Press ▲ / Button to select the option then press OK button to choose ON/OFF.

Equalizer Detail – Press ▲/▼ button to select the option then press OK button to enter the sub-menu.

Speakers – Press ▲ / Button to select the option then press OK button to enter the sub-menu. (Optional: TV Speaker, External Audio System).

Digital Output – Press ▲/Button to select the option then press OK button to enter the sub-menu. (Optional: Auto, Bypass, PCM, Dolby Digital Plus, Dolby Digital).

SPDIF Delay – Press ▲/▼ button to select the option. Press ◀ to decrease the parameter. Press ▶ to increase the parameter.

Auto Volume Control – Press ▲/Button to select the option then press OK button to choose ON/OFF.

Downmix Mode- Press ▲/Button to select the option then press OK button to enter the sub-menu. (Optional: Stereo, Surround).

Reset to Default – Reset all settings to the factory defaults.

STORAGE

Storage Device storage Internal shared storage Total space: 4.6 GB Removable storage KINGSTON Total space: 15 GB

Internal shared storage- Press ▲/▼button to select the option then press OK button to enter the sub-menu.

Removable Storage –Press ▲/▼ button to select the option then press OK button to enter the sub-menu.( Note:Show external devices if available)

HOME SCREEN

Home screen Channels Customize channels Enable video previews Enable audio previews Apps Reorder apps Reorder games Open source licenses Android TV Home Android TV Core Services

In this menu, you can set channels, apps, open source licenses.

1. Press ▲/▼ button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment, Press BACK button return to the previous menu.

RETAIL MODE

Retail Mode Retail Mode 209 Retail Messaging Sentos v100mm P.O. Diemis 208

Retail mode – Press ▲/▼button to select the option then press OK button to choose ON/OFF.

Retail messaging – Press ▲/▼ button to select the option then press OK button to enter the sub-menu. (Note: Demo video, e-POP left, e-POP bottom)

PQ Demo – Press ▲/▼button to select the option then press OK button to enter the sub-menu. (Note:OFF,LEFT,RIGHT)

GOOGLE

Google Accounts View permissions Searchable apps Select which apps to include in search results. SafeSearch filter Block offensive words Open source licenses

In this menu, you can set searchable apps, safe search filter, block offensive words, open source licenses.

1. Press▲/▼ button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment, Press BACK button return to the previous menu.

CHROMECASTBUILT-IN

Chromecast built-in About Open source licenses Version number 1.36.145507

In this menu, you can read the information and settings of Chromecast

1. Press ▲ / Button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment, Press BACK button return to the previous menu.

SCREEN SAVER

Screen saver Screen saver Backdrop When to start After 5 minutes of inactivity Put device to sleep After 30 minutes of inactivity Start now

Screen saver – Press ▲/▼ button to select the option then press OK button to enter the sub-menu. (Optional: Turn screen off, Backdrop, Colors)

When to Start – Press ▲/▼ button to select the option then press OK button to enter the sub-menu. (Optional: 5 minutes, 15 minutes, 30 minutes, 1 hour, 2 hours, ).

Put device to sleep – Press ▲/▼ button to select the option then press OK button to enter the sub-menu. (Optional: 30 minutes, 1 hour, 3 hours, 6 hours, 12 hours, Never).

Start now – Press ▲/▼ button to select the option then press OK button to enter screen saver.

LOCATION

Location Location status Use Wi-Fi to estimate location Recent location requests No apps have requested location recently

Location status – Press ▲/▼ button to select the option then press OK button to enter the sub-menu. (Optional: Use Wi-Fi to estimate location, Off)

USAGE & DIAGNOSTICS

Usage & Diagnostics On Automatically send diagnostic information to Google, like crash reports and usage data from your device, apps, and Chromecast built-in. This information won't be used to identify you. You can adjust these permissions at any time from device settings. Learn more at: g.co/AndroidUsageHelp and g.co/cast/device_stats.

Usage & diagnostics – Press ▲/▼ button to select the option then press OK button to choose ON/OFF.

ACCESSIBILITY

Accessibility Captions High contrast text (Experimental)

Captions – Press ▲/▼button to select the option then press OK button to enter the sub-menu. High contrast text – Press ▲/▼button to select the option then press OK button to choose ON/OFF.

RESET

Press OK button to enter the sub-menu. Reset-Erase everything.

REMOTE&ACCESSORIES

Searching for accessories... To enable Google Assistant inc on anuremote control, press and hold Red button and Blue button simultaneously for 5 seconds. Then press "OK" button when the HaierTV-RC displays in the upper right corner of the portion. If pairing is unsuccessful, please wait a few minutes and try again. Press OK! to exit accessory adding. HaierTV-RC Pairing... Remotes & Accessories Add accessory HaierTV-RC Connected

In this menu, you can pair Bluetooth devices.

1. Press the "RED" and "BLUE" buttons at the bottom of the remote control for 5 seconds.
2. When the LED starts to flash, release it. The remote controller will send the pairing signal to the TV and display the information of the remote control on the right side of the screen.
3. Press the OK button to display the pairing. If the paired is displayed, the connection is successful.
4. If the couldn't pair appears, the connection fails. Wait 30 seconds and then press the "RED" and "BLUE" buttons at the bottom of the remote control for 5 seconds to repeat the previous steps.
5. Press EXIT or BACK button return to the previous menu.

ADD AND USE OF MULTI MEDIA PLAYER

Search movies, TVs and more 10:40 Unable to access internet Check your network connection Defaults Dismiss Apple MultiMediaPaper

Select app Airoha_BT_Data_OTA MultiMediaPlayer Play Games System Tracing

1. In the HOME interface, select the + icon in the APP column to add the application, and click OK. Press up and down to select the MultiMediaPlayer application, and click OK to add it to the HOME interface.

Playback Video Photo Audio

1. Select OK key to enter Multi Media Player and display Video, Photo, Audio. After inserting the usb flash drive, you can view the corresponding files in the usb flash drive.

NOTE

The menu may be different depending on when you purchased the TV.

Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty.

Symptoms	Items to Check and Actions to Follow
"Ghost" or double image	·This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture.
No power	·Check if the TV's AC power cord is plugged into the outlet. ·Unplug the TV, wait for 60 seconds. Then reinsert plug into the outlet and turn on the TV again.
No picture	·Check antenna connections at the rear of the TV to see if it is properly connected to the TV. ·Possible broadcast station trouble. Try another channel. ·Adjust the contrast and brightness settings. ·Check the Closed Captions control. Some TEXT modes could block the screen.
Good picture but no sound	·Increase the volume level by pressing the VOL+ button on the remote control or on the TV side control panel. ·Press the MUTE button on the remote control to ensure mute is off.
Good sound but poor color	·Adjust the contrast, color and brightness settings.
Poor picture	·Poor picture quality may occur when an activated S-VHS camera or camcorder is connected to your TV and other peripherals at the same time. Switch off one of the peripherals.
Snowy picture and noise	·Check the antenna connection.
Horizontal dotted line	·This may be caused by electrical interference (e.g. hair dryer, nearby neon lights, etc.) Turn off the equipment.
Television not responding to remote control	·Check whether the batteries are working. Replace if necessary. ·Clean the remote control sensor lens on the TV. ·You can still use the buttons on the side of your TV.
Pixels (dots) that are always dark or always lit	·Your TV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product.

50" UHD Digital LED LCD TV

Television picture quality:	UHDIntegrated digital.Screen Size: 127cmResolution 3840x2160 pixels 50Hz.
DTV Tuner Decoder	DVB-T, DVB-C, DVB-T2, DVB-S216/32/64/128/256 QAM modulationMPEG2,MPEG4,H.265
Connectivity:	1 Optical port2 USB port1 RJ454 HDMI sockets1 VIDEO socket1 L socket1 R socket2 RF socket1 YPbPr socket1 EARPHONE port1 TF socket1 CI slotSupported Systems:PAL+SECAMStorage channel number: 1000(DTV),100(ATV)TV (RF) :75 Ω ImbalanceAV Video-Input:75 Ω ,1V-P,RCAAV Audio-Input:20K Ω ,500mV RMSYPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Sound quality:	Stereo sound system.2 x 15 watts RMS power output.
Standby Power consumption	≤ 0.5W
Digital features:	Digitally interactive.Digital text.Digital video broadcasting (DVB) subtitles available.Auto setup.Auto scan for new channels.Now and next programme guide.7 day electronic programme guide (EPG).Top up TV compatible.CI slot.Audio description compatible.
Additional features:	UHF/VHF tuner;Sleep timer;Parental Guidance;Picture and textRemote control batteries required 2 x AAA (included).ESA Mount Size: 200 mmPackage Size (WxHxD): 1230x753x137 mmSet Size (WxHxD) with Stand: 1122x702x278 mmSet Size (WxHxD) without Stand: 1122x646x65 mmPackage weight : 14.4kgSet weight with stand: 11.4kgSet weight without stand: 11.2kg

* The part specifications of this TV set provided here are for reference only.
Differences may occur as product technology is updated.
Design and specifications are subject to change without notice.

55" UHD Digital LED LCD TV

Television picture quality:	UHDIntegrated digital.Screen Size: 138.79cmResolution 3840x2160 pixels 50Hz.
DTV Tuner Decoder	DVB-T, DVB-C, DVB-T2, DVB-S216/32/64/128/256 QAM modulationMPEG2,MPEG4,H.265
Connectivity:	1 Optical port2 USB port1 RJ454 HDMI sockets1 VIDEO socket1 L socket1 R socket2 RF socket1 YPbPr socket1 EARPHONE port1 TF socket1 CI slotSupported Systems:PAL+SECAMStorage channel number: 1000(DTV),100(ATV)TV (RF) :75 Ω ImbalanceAV Video-Input:75 Ω ,1V-P,RCAAV Audio-Input:20K Ω ,500mV RMSYPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Sound quality:	Stereo sound system.2 x 15 watts RMS power output.
Standby Power consumption	≤ 0.5W
Digital features:	Digitally interactive.Digital text.Digital video broadcasting (DVB) subtitles available.Auto setup.Auto scan for new channels.Now and next programme guide.7 day electronic programme guide (EPG).Top up TV compatible.CI slot.Audio description compatible.
Additional features:	UHF/VHF tuner;Sleep timer;Parental Guidance;Picture and textRemote control batteries required 2 x AAA (included).ESA Mount Size: 400x200 mmPackage Size (WxHxD): 1350x810x150 mmSet Size (WxHxD) with Stand: 1234x768.4x 277.6 mmSet Size (WxHxD) without Stand: 1234x719x73 mmPackage weight : 16.5kgSet weight with stand: 12.36kgSet weight without stand: 12.18kg

* The part specifications of this TV set provided here are for reference only.
Differences may occur as product technology is updated.
Design and specifications are subject to change without notice.

www.Haier.com