MAGCR1133 - Switch JUNG - Free user manual and instructions
Find the device manual for free MAGCR1133 JUNG in PDF.
User questions about MAGCR1133 JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Switch in PDF format for free! Find your manual MAGCR1133 - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MAGCR1133 by JUNG.
USER MANUAL MAGCR1133 JUNG
Operating Instructions Multimedia connection system
natural_image
Close-up of a white electrical socket with three gold and red buttons, no visible text or symbols1. Safety instructions
Electrical equipment must only be installed and assembled by qualified electricians.
Always follow the relevant accident prevention regulations.
Failure to comply with these instructions may result in damage to the device, fire or other hazards.
Proper signal transmission is only ensured when the appropriate accessories are used and the specified maximum cable lengths are observed, as well as the minimum permissible distance of 0.3 m from current-carrying cables and sources of interference (electronic ballasts, dimmers, ESLs, etc.) are observed.
These operating instructions are an integral component of the product, and must be retained by the end user.
2. Function
The multimedia connection system serve to connect input and output devices for transmission of audio/video signals and data.
① The available functions depend on the devices that are connected. To select the suitable socket, note the information from the manufacturer of the connected devices.
Intended use
- Only suitable for use in indoor areas
- Can be used in multiple combinations
- Flush-mounting in wall box according to DIN VDE 0606
- Connection of audio/video devices via „Plug & Play“
3. Operation
CAUTION!
The use of non-standardised connecting cables and connectors can cause device malfunctions.
The devices may be destroyed.
Use only approved connecting cables and connectors.
3.1. Connecting multimedia devices
- Insert connector of the connecting cable from the signal source, e.g. from a DVD or MP3 player, into the jack of multimedia socket.
- Insert connector of the connecting cable from a playback device, e.g. from an LCD/plasma television or stereo system, into the jack of a second multimedia socket.
① Insert connectors into the jacks straight and without using force. Twisting or tilting the connector may deform the contacts.
Application examples
| Connection | Devices |
| Cinch | Audio systems, AV receivers, active loudspeakers |
| S-Video | SAT receivers, televisions, projectors, iPod docking stations, video cameras |
| USB | iPods, printers, storage media, digital cameras |
| TRS 3.5 mm | MP3 players, CD/DVD players, sound cards, audio systems |
| VGA | PCs/laptops, projectors, monitors |
| HDMI | High definition plasma/LCD televisions, SAT receivers, projectors, game consoles, DVD/Bluray players, DVD/HDD recorders, video cameras |
Information for electricians
4. Assembly
4.1. Connecting and installing the multimedia connection system
The connecting cable has been laid, the wall box is installed in the wall.
① Recommendation: use Kaiser „Electronics Box“ (Art. no. 1068-02 or 9062-74) in order to maintain the permissible bending radii.
- Insert connector of the connecting cable into the corresponding jack on the rear of the multimedia connection system.
- Screw insert to the wall box in the tight orientation via the supporting ring.
- Place centre plate into the frame.
- Mount centre plate together with the frame on the insert using screwless terminals.
The multimedia connection system can be commissioned.
5. Commissioning
CAUTION!
Short-circuit if devices that are switched on are connected.
Devices may be destroyed.
Switch all devices off before connecting them.
5.1. Carrying out a functional test
Multimedia connection system is connected.
- Activate the desired functions and check the signal transmission at the signal sources and the playback device, e.g. play a DVD and check picture/sound reproduction on a television set.
The multimedia connection system is ready for operation.
6. Appendix
6.1. Technical data
Cinch Audio
Rated voltage: DC 50 V
Frequency ranges: 20 Hz ... 20 kHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100 MΩ
Electric strength: AC 500 V\~ (50/60 Hz) for 1 min 2 mA
Insertion and removal forces: 3 ... 25 N
Insertion cycles: ≥ 1000
Gender changer: white (left), red (right)
Contact material: gold-plated
Installation depth: 14 mm
Ambient temperature: -5 ... +45 °C
TRS 3.5 mm
Rated voltage: DC 50 V
Frequency ranges: 20 Hz ... 20 kHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100 MΩ
Electric strength: AC 500 ... 2000 V\~
DC 800 V
Insertion and removal forces: 4.9 ... 14.7 N
Insertion cycles: ≥ 2000
Gender changer: 3.5 mm Audio Stereo, 180°
Contact material: gold-plated
Ambient temperature: -5 ... +45 °C
Composite Video
Rated voltage: DC 50 V
Frequency ranges: ≤ 160 MHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100 MΩ
Electric strength: AC 500 V\~ (50/60 Hz) for 1 min 2 mA
Insertion and removal forces: 3 ... 25 N
Insertion cycles: ≥ 1000
Gender changer: yellow
Contact material: gold-plated
Installation depth: 14 mm
Ambient temperature: -5 ... +45 °C
Multimedia connection system
Ref.-no.: MA..
S-Video
Rated voltage: DC 50 V
Frequency ranges: ≤ 160 MHz
Contact resistance: ≤ 80 mΩ
Insulation resistance: ≥ 50 MΩ
Electric strength: AC 500 V\~ (50/60 Hz)
for 1 min 2 mA
Insertion forces: ≤ 44.1 N
Removal forces: 5.88 ... 29.4 N
Insertion cycles: ≥ 1000
Gender changer: S-Video
Contact material: gold-plated
Ambient temperature: -5 ... +45 °C
VGA
Resolution: ≥ 800 x 600 pixels
≤ 1280 x 1024 pixels
S-VGA compatible
Frequency ranges: ≤ 160 MHz
Contact resistance: ≤ 30 mΩ
Insulation resistance: ≥ 1000 M
Electric strength: AC 500 V\~ (50/60 Hz)
for 1 min 2 mA
Insertion forces: 43.9 N
Removal forces: 3.92 N
Insertion cycles: ≥ 500
Gender changer: 15pole D-subminiature, 180°
Installation depth: 5 mm
Ambient temperature: -5 ... +45 °C
HDMI
Standard: HDMI 2.0a
Support for HDMI™ technology
(HDMI High Speed)
4K @ 50/60 Hz
Full HD @ 48 Hz 3D
HDR Video
Gender changer: HDMI ^™ type A, 180°
Contact material: gold-plated
Installation depth: 25 mm
Ambient temperature: -5 ... +45 °C
USB
Standard: 2.0 High Speed
Gender changer: Type A, 180°
Installation depth: 27 mm
Ambient temperature: -5 ... +45 °C
DVI
Standard: DVI-I Dual Link (analogue + digital)
Rated voltage: AC 40 V
Frequency range: ≤ 1000 MHz
Contact resistance: ≤ 20 m
Insertion/removal cycles: ≥ 1000
Terminal: 180°
Installation depth: 17 mm
Installation note: Consider bending radius and various plug types. Ensure sufficient installation space.
6.2. Troubleshooting
No signal at the playback device after the signal sources is switched on.
Cause 1: Playback device is not switched on.
- Switch on playback device.
Cause 2: Loose connector.
- Check that all connections are properly seated.
No video signal at the playback device after the signal sources is switched on.
Cause 1: Signal source is not recognised by the playback device.
- Manual selection of the signal source using remote control or channel selection buttons of the player.
Cause 2: VGA output of the signal source is not activated.
- Activate VGA output. Note information of the device manufacturer.
No audio signal at the playback device after the signal sources is switched on.
Cause 1: Volume control on the signal source or on the playback device is set too low.
- Increase volume.
Cause 2: The audio on the playback device is set to mute.
- Deactivate the mute function. Note information of the device manufacturer.
6.3. Guarantee
Our products are under guarantee within the scope of the statutory provisions.
Please return the unit postage paid to our central service department giving a brief description of the fault:
ALBRECHT JUNG GMBH & CO. KG
Service-Center
Kupferstr. 17-19
D-44532 Lünen
Service-Line: +(49) 23 55.80 65 51
Telefax: +(49) 23 55 . 80 61 65
The CSign is a free trade sign addressed exclusively to the authorities and does not include any warranty of any properties.