ESUH2468RM0 - Washing machine LG - Free user manual and instructions

Brand	LG
Model	ESUH2468RM0
Product Type	Washing Machine
Dimensions (H x W x D)	850 x 600 x 600 mm
Weight	70 kg
Rated Capacity	8 kg
Spin Speed	1400 rpm
Energy Class	A+++
Power Supply	220-240 V, 50 Hz
Rated Power	2000 W
Water Pressure	0.1 - 1 MPa
Wash Programs	Cotton, Synthetics, Delicates, Quick 30, Daily Wash
Smart Technology	AI DD (Artificial Intelligence Direct Drive)
Noise Level (Wash/Spin)	54 dB / 74 dB
Maintenance	Clean filter, drain pump filter, drum clean cycle
Safety Features	Child lock, door lock, overflow protection
Spare Parts Availability	Drain pump, door seal, control board, belts
Repair Index (France)	8.0 / 10
User Manual Languages	Multiple languages available for download

Frequently Asked Questions - ESUH2468RM0 LG

How do I install the washing machine?

Ensure the machine is on a level, sturdy surface. Remove all transport bolts and connect the water inlet hose to a tap with cold water. Connect the drain hose to a standpipe or sink drain. Plug the power cord into a grounded outlet.

What should I do if the machine does not start?

Check that the door is fully closed, the water supply is open, and the power cord is connected. Ensure the Child Lock is not activated. Press the Power button and select a program.

How do I clean the drain pump filter?

Unplug the machine, open the filter cover at the bottom right, place a towel under it, and unscrew the filter. Remove any debris and rinse the filter under running water. Reinstall and close the cover.

Why is my washing machine vibrating excessively?

Ensure all transport bolts are removed. Level the machine by adjusting the feet. Check that the load is balanced and not overweight. Overloading can cause vibrations.

How do I use the Quick 30 program?

Select the Quick 30 program on the control panel for lightly soiled clothes. The cycle runs for 30 minutes. Use less detergent as it is a short cycle.

What does AI DD mean?

AI DD (Artificial Intelligence Direct Drive) detects fabric softness and weight to optimize motion for better cleaning and gentler care. It automatically adjusts the drum movement.

Can I wash delicate items like silk?

Use the Delicates program with cold water. Place items in a laundry bag to prevent damage. Avoid spinning at high speeds.

How to clean the detergent drawer?

Remove the drawer by pressing the release lever. Wash it with warm water and a soft brush. Clean the compartment with a damp cloth. Reinsert the drawer.

What are the emergency drain steps?

If the machine stops with water inside, unplug it. Open the filter cover and slowly unscrew the drain pump filter to release water. Have a container ready. For full instructions, see the manual.

Where can I find spare parts?

Authorized LG service centers and online parts retailers offer genuine spare parts. Check the manual for part numbers. The repair index is 8.0/10, indicating good repairability.

USER MANUAL ESUH2468RM0 LG

Prior to installation, this air conditioning unit must be submitted for approval by the utility service which provides electricity (EN 61000-2, EN 61000-3 Norm).

IMPORTANT

• Please read this owner's manual carefully and thoroughly before installing and operating your room air conditioner.
• Please retain this owner's manual for future reference after reading it thoroughly.

TYPE : ARTCOOL MIRROR

TABLE OF CONTENTS

Safety Precautions......3

Prior to Operation ......6

Operating Instructions......9

Remote Controller .....9

Remote Control Operation.....11

Additional features.....19

Maintenance and Service ....23

Operation Tips ......24

Troubleshooting .....25

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.

You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips first, you may not need to call for service at all.

PRECAUTION

• Contact the authorized service technician for repair or maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young children or invalids without supervision.
• Young children should be supervised to ensure that they do not play with the air conditioner.
• When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.
  • Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only.

Illustration of a beach scene with people relaxing and eating, palm trees and sun in background (no text or symbols)

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.

WARNING

This symbol indicates the possibility of death or serious injury.

CAUTION

This symbol indicates the possibility of injury or damage.

Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

WARNING

Installation

Do not disassemble or repair the product. Always earth the product.

- Contact your dealer and service center. • It will cause fire or electric shock.

Do not handle the flammable gas or explosive materials near the product.

- Otherwise, it may cause fire or failure of product.

Do not install the product on a defected installation stand.

- Otherwise, It may cause injury or accident.

For installation, always contact the dealer or service center.

- Otherwise, it may cause fire, electric shock, explosion or injury.

For electric work, contact the dealer or service center.

- It will cause fire or electric shock. • It will cause fire or electric shock.

Always install an circuit breaker and main breaker.

- No installation may cause fire and electric shock.

Do not install where flammable gas could leak.

- Otherwise, it may cause explosion or fire.

Be cautious when unpack and install the product.

- Sharp edges could cause injury.

Do not install the product on an defected installation stand.

- Otherwise, It may cause injury or accident.

Do not use damaged power cable.

Operation

Do not touch(operate) product with wet hands.

- Otherwise, it may cause fire or electric shock.

Do not put the heater, etc. near the power cable.

- Otherwise, it may cause fire and electric shock.

Ventilate well in using with a stove, etc.

- Otherwise, an oxygen shortage may occur.

Do not place heavy object on the power cable.

- Otherwise, it may cause fire or electric shock.

Cover the electric part.

- Otherwise, it may cause fire or electric shock.

Do not open the suction inlet of the product during operation.

- Otherwise, it may cause electric shock or failure.

Be cautious that children could not step on the product.

- Otherwise, children may be seriously injured.

Take care to ensure that water could not enter into the product.

- Otherwise, it may cause fire or electric shock.

If abnormal sounds, or small or smoke comes from product. Turn the breaker off or disconnect the power supply cable.

- Otherwise, it may cause electric shock or fire.

Do not put water into electric part.

- Otherwise, it may cause fire or failure of product, and electric shock.

When the product is not going to be used for a long time, disconnect the power supply plug or turn off the breaker.

- Otherwise, it may cause failure of product or fire.

When the product is flooded, contact the service center.

- Otherwise, it may cause fire or eletric shock.

Do not turn the breaker on/off or connect/disconnect the power supply plug during operation.

- Otherwise, it may cause fire or electric shock.

Do not touch the metal parts of the product when removing the air filter.

- Otherwise, it may cause personal injury.

Do not step or put anything on the product.

- Otherwise, it may cause personal injury and failure of product.

CAUTION

Installation

Always inspect gas leakage after installation and repair of product.

- Otherwise, it may cause failure of product.

Do not carry the product by oneself.

- Otherwise it may harm to your health.

Install the drain hose to ensure that drain can be securely done.

- Otherwise, it may cause water leakage.

Keep the level even in installing the product.

- Otherwise, it may cause vibration or water leakage.

Install the product so that noise or hot wind from the outdoor unit. May not give any damage to the neighborhoods.

- Otherwise, it may cause dispute with the neighborhoods.

Operation

Do not expose your skin directly to cool air for a long time.

When flammable gas leakages from the product, open the window for ventilation.

- Otherwise, it may harm to your health. • Otherwise, it may cause explosion or fire.

Turn the main power off when cleaning the product.

Do not put a pet or houseplant where it will be exposed to direct air flow.

- Otherwise, it may cause fire and electric shock. • This could injure the pet or plant.

Do not use the product for special purpose to preserve animals, vegetables, precision device, or art objects, etc.

Stop operation and close the window in strom or hurricane.

- Otherwise, it may cause loss of property. • Otherwise, it may cause failure of product or electric shock.

Do not place obstacles around the flow inlet or outlet.

Always insert the filter securely. Clean it once every two weeks.

- Otherwise, it may cause failure of product. • Otherwise, it may cause failure of the product.

Use a soft cloth to clean, Do not use wax, tinner or a strong detergent, etc.

Do not drink water drained from the product.

- Otherwise, it may change the appearance of the product.

- Otherwise, it may harm to your health.

Do not insert your hand or bars, etc. into the air inlet/outlet.

Do not use the product at the closed space for a long time.

- Otherwise, it may cause personal injury. • Otherwise, it may cause suffocation due to poor oxygen.

Do not operate the product for a long time in high humidity, and leave a door or window open.

Do not step onto an unstable bench when maintaining the product, etc.

- Otherwise, water may drop and wet or damage furniture, etc.

- Otherwise, it may cause personal injury.

Replace the 2 batteries with new ones of same type.

Do not charge or disassemble the batteries and do not throw them into a fire.

- Otherwise, it may cause fire or an explosion.

If liquid from the batteries gets onto your skin or clothes, wash it well with clean water.

Use a rated fuse.

- Otherwise it may harm to your health. • Otherwise, It will cause fire or electric shock.

Prior to operation

Preparing for operation

1. Contact an installation specialist for installation.
2. Connect the power cable between indoor unit and outdoor unit properly.
3. Use a dedicated circuit.
4. If the cord/plug is damaged, replace it with only an authorized replacement part.

Usage

1. Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaning and maintenance

1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned off. There is a possibility of injury if the unit's power is accidentally triggered on while cleaning inner parts of the unit.

Service

For repair and maintenance, contact your authorized service dealer.

Symbols Used in this Manual

NOTICE

This symbol alerts you to the risk of electric shock.

This symbol alerts you to hazards that could cause harm to the air conditioner.

This symbol indicates special notes.

Features

▲ WARNING

This appliance should be installed in accordance with national wiring regulations. This guide acts as a guide to help to explain product features.

Indoor

Air Inlet Air Filter Front Panel Signal Receptor

Outdoor

Air Intake Vents Connecting Wires Piping Air Outlet Vents Base Plate Drain Hose

Electrical Safety

▲ WARNING

• This appliance must be properly grounded.
To minimize the risk of electric shock, you must always plug into a grounded outlet.
- Do not cut or remove the grounding prong from the power plug.
- Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring.
- If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and circuit checked by a qualified electrician.

Temporary Use of an Adapter

We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections, use only a UL-listed adapter, available from most local hardware stores. Ensure that the large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.

To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.

▲ WARNING

- Never use the appliance with a broken adapter.

Temporary Use of an Extension Cord

We strongly discourage the use of an extension cord due to potential safety hazards. For temporary situations, use only CSA certified and UL listed 3-wire grounded extension cords, rated 15 A, 125 V.

Operating Instructions

Remote Controller

1 Remove the battery cover by pulling it according to the arrow direction.
2 Insert new batteries making sure that the (+) and (-) of battery are installed correctly.
3 Reattach the cover by sliding it back into position.

Illustration showing three-step manual tool application steps for connecting wires, with arrows indicating direction of movement.

NOTICE

- Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries.

Storage and Tips For Using the Remote Controller

- The referring to the following picture, fix the remote controller holder onto the wall using screws.

Diagram showing a hand holding a tool interacting with three mobile phones, illustrating the process of device usage or testing.

• To operate the room air conditioner, aim the Remote Controller to the signal receptor.

Line drawing of a rectangular device with a diagonal line extending from it, connected to a handheld device (no text or symbols present)

Isometric line drawing of a rectangular electronic device with a mesh grille (no text or symbols)

On/Off : Lights up during the system operation.

Sleep Mode : Lights up during Sleep Mode Auto operation.

Timer : Lights up during Timer operation.

Defrost Mode : Lights up during Defrost Mode or Hot Start operation.(Heat pump model only)

( ≡ ) Plasma : Lights up during Plasma operation. (Optional)

Desire temperature : For cooling, dehumidification, heating modes it display desired temperature

indicator • Cooling : 18\~30°C • AI : Auto Operation • Dehumidification : 18\~30°C • Po : Jet Cool • Heating : 16\~30°C • Lo : Test Mode

Remote Control Operation

The Remote Controller transmits the signals to the system.

Signal transmitter 5 6 1 3 4 2 7 10 9 11 8 12 13 14 15 16 17 18 19 ON- OFF AUTO CLEAN PLASMA RESET 2xFF Flip-up door (opened)

graph TD
    A["Operation Mode"] --> B["Cooling Operation"]
    B --> C["Auto Operation"]
    C --> D["Healthy Dehumidification Operation"]
    D --> E["Heating Operation"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

1 START/STOP BUTTON
Operation starts when this button is pressed and stops when the button is pressed again.
2 OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3 ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
4 INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps low, medium, high and CHAOS.
5 JET COOL
Used to start or stop the speed cooling/heating. (Speed cooling/heating operates super high fan speed.)
6 CHAOS SWING BUTTON
Used to stop or start louver movement and set the desired up/down airflow direction.
7 ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation.
TIME SETTING BUTTONS
Used to adjust the time.
9 TIMER SET/CANCEL BUTTON
Used to set the timer when the desired time is obtained and to cancel the Timer operation.
10 SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or heating.
12 ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
13 PLASMA (Optional)
Used to start or stop the plasma-purification function.
14 RESET BUTTON
Initialize remote controller.
15 2nd F Button
Used prior to using modes printed in blue at the bottom of buttons.
16 AUTO CLEAN
Used to set Auto Clean mode.
17 LED LUMINOSITY
Used to control the luminosity of the display on unit
18 HORIZONTAL AIRFLOW DIRECTION CONTROL BUTTON (NOT ON ALL MODELS)
Used to set the desired horizontal airflow direction.

Cooling Operation

graph TD
    A["1 Press the Start/Stop button.<br>The unit will respond with beep sound."] --> B["2 Open the door on the Remote Controller. To select Cooling Operation, press the Operation Mode Selection button.<br>Each time the button is pressed, the operation mode is shifted in the direction of the arrow."]
    B --> C["3 Set the temperature lower than the room temperature.<br>The temperature can be set within a range of 18°C~30°C in 1°C."]
    C --> D["4 You can select the fan speed in four steps-low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted."]

Natural wind by the CHAOS logic

☐ For more fresh feeling, press the Indoor Fan Speed Selector and set CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic.

Auto changeover operation

graph TD
    A["1 Press the Start/Stop button.<br>The unit will respond with a beep."] --> B["2 Open the door of the remote controller. To select Auto Changeover Operation, press the Operation Mode Selection button.<br>Each time the button is pressed, the operation mode is shifted in the direction of the arrow."]
    B --> C["3 Close the door of the remote controller. Set the temperature lower than the room temperature. The temperature can be set within a range of 18°C~30°C at intervals of 1°C."]
    C --> D["4 Set the fan speed again with the door of the remote controller still closed.<br>You can select the fan speed in four steps-low, medium, high and CHAOS.<br>Each time the button is pressed, the fan speed mode is shifted."]

During Auto changeover Operation

The air conditioner changes the operation mode automatically to keep indoor temperature. When room temperature vary over ±2^ with respect to setting temperature, air conditioner keeps the room temperature within ±2^ with respect to setting temperature by auto changeover mode.

Healthy Dehumidification Operation

LG

1 Press the Start/Stop button. The unit will respond with beep sound.

Hand pressing a button on an oval button (no text or symbols)

2 Open the door on the Remote Controller. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

(Cooling Only model) (Heat Pump model)

18°C Cooling Auto Changeover Healthy Dehumidification Heating (Heat pump model only)

3 Set the fan speed. You can select the fan speed in four steps - low, medium, high, or CHAOS. Each time the button is pressed the fan speed mode is shifted.

NATURAL WIND BY THE CHAOS LOGIC

☐For more fresh feeling, press the Indoor Fan Speed Selector and set CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic.

DURING HEALTHY DEHUMIDIFICATION OPERATION:

☐ If you select the dehumidification mode on the operation selection button, the A/C starts to run the dehumidification function, automatically setting the room temp. and air volume to the best condition for dehumidification based on the sensed room temp.

In this case, the setting temp. is not displayed in the Remote Controller and you are not able to control the room temp. either.

☐ During the healthy dehumidification function, the air volume is automatically set according to the algorithm responding to the current room temp. and makes the room condition healthy and comfortable even in the high humidity season.

Heating Operation(Heat pump model only)

graph TD
    A["1 Press the Start/Stop button.<br>The unit will respond with beep sound."] --> B["2 Open the door on the Remote Controller. To select Heating Operation, press the Operation Mode Selection button.<br>Each time the button is pressed, the operation mode is shifted in the direction of the arrow."]
    B --> C["3 Set the temperature higher than the room temperature.<br>The temperature can be set within a range of 16°C~30°C in 1°C."]
    C --> D["4 Set the fan speed again. You can select the fan speed in four steps-low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted."]

NATURAL WIND BY THE CHAOS LOGIC

☐ For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic.

Jet Cool

graph TD
    A["1 Press the Start/Stop button.<br>The unit will respond with beep sound."] --> B["2 Press the Jet Cool button to operate the speed cooling mode and the unit will operate in super high fan speed on cooling mode for 30 minutes."]
    B --> C["3 To cancel the Jet Cool mode, press the Jet Cool button or the fan button or the room temperature setting button again and the unit will operate in high fan speed in cooling mode"]

NOTICE

During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely high speed for 30 minutes setting the room temp. automatically to 18^ . It is especially used to cool the room temperature in the shortest time.
☐ In order to return to the normal cooling mode from the Jet Cool mode, you just press either the operation mode selection button, air volume selection or temp. setting button or the JET COOL button again.

NEO PLASMA Purification Operation (Optional)

graph TD
    A["1 Press the Start/Stop button.<br>The unit will respond with beep sound."] --> B["2 Open the door on the Remote Controller.<br>Press the PLASMA air purifying operation ON/OFF button.<br>Operation will start when the button is pressed and stop when the button is pressed again."]
    B --> C["3 Set the fan speed. You can select the fan speed in four steps-low, medium, high or CHAOS.<br>Each time the button is pressed, the fan speed mode is shifted.<br>*Air purifying operation (PLASMA) is available in Heating or any other operations."]

PLASMA Air Purifying Operation only (Optional)

PLASMA

If you press the PLASMA button, NEO PLASMA air purifying operates.

Each time the button ( ⊕ ) is pressed, the fan speed mode is shifted.

2nd F Operation

1 Press the Start/Stop button. The unit will respond with beep sound. 2 Open the door of the Remote Controller and press the 2nd F button to operate functions printed in blue at bottom of buttons. (Check the indication of 2nd function on Remote Controller display.) These buttons operate the timer setting as follows: 3 2nd function goes off in a short time automatically or when the button is pressed again. For more details, refer to functions next page.

Additional features

Sleep Mode

1. Press the Sleep Mode Auto button to set the time you want the unit to turn off automatically.

2. The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times.

The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner.

1. Make sure the Sleep Mode Auto LED lights up.

To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star (☆) disappears from the operation display.

NOTICE The Sleep Mode will be operated at low fan speed (cooling) or medium fan speed (heat pump only) for quiet sleeping.

IN COOLING MODE: The temperature will automatically rise by 1°C over the next 30 minutes and by 2°C in 1 hour for comfortable sleeping.

Setting the Time

1. Time can be set only when you have pressed the Reset button. If you have just replaced the batteries, the Reset button should be pressed to reset the time.

Press the Start/Stop button.

1. Press 2^nd F button and check if 2^nd F icon is on.

1. Press the Time Setting buttons until the desired time is set.

2. Press the Timer SET button.

NOTICE Check the indicator for A.M. and P.M.

Delay Start/Pre-Set Stop

1. Make sure the time is set correctly on the Remote Controller display.

2. Press 2^nd F button.

3. Press the ON/OFF Timer buttons to turn Timer on or off.

4. Press the Time Setting buttons until the desired time is set.

1. Press the selected on/off setting by pressing the Timer SET button while aiming the Remote Controller at the signal receptor.

To cancel the setting the timer.

Press the Timer Cancel button while aiming Remote Controller at the signal receptor.

(The timer lamp on the air conditioner and the display will go out.)

NOTICE

Select one of the following four types of operation.

with the unit running

OFF TIME a.m. 12:00 ON TIME a.m. 6:00 ON TIME OFF TIME a.m. 3:30 a.m. 3:00 ON TIME OFF TIME a.m. 3:00 a.m. 3:30

Delay OFF Timer Delay ON Timer Delay OFF and ON Timer Delay ON and OFF Timer

Vertical Airflow Direction Control

(Vertical Airflow) can be adjusted by using the Remote Controller.

Press the Start/Stop button to start the unit.

Open the door on the Remote Controller.

Press Chaos Swing button and the louvers will swing up and down.

Press the Chaos Swing button again to set the vertical louver at the desired airflow direction.

Illustration of a rectangular electronic component with a curved arrow indicating rotation or force (no text or symbols)

Press Chaos Swing button and the louvers will swing.

Press the button again and the louvers will stop. After 30 minutes, the louvers return to the maximum airflow position automatically.

Horizontal Airflow Direction Control

The left/right(Horizontal Airflow) can be adjusted by using the remote control.

1. Press the Start/Stop button to start the unit.
2. Open the door on the remote control. Press the Airflow Direction Start/Stop button and the louvers will swing left and right. Press the Horizontal Airflow Direction Control Button again to set the horizontal louver at the desired airflow direction.

NOTICE

☐If you press the CHAOS swing button, the horizontal airflow direction is changed automatically based on the CHAOS algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable, as if enjoying a natural breeze.
□Always use the Remote Controller to adjust the up/down airflow direction. Manually moving the vertical airflow direction louver by hand could damage the air conditioner.
□When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.

Air Circulation Mode

Circulates the room air without cooling or heating.

1. Press the Start/Stop button. The unit will respond with beep sound.
2. Open the door on the Remote Controller. Press the Air Circulation button. Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back to low again.

graph LR
    A["Battery State"] --> B["State 1"]
    B --> C["State 2"]
    C --> D["State 3"]
    D --> E["State 4"]

Fan speed is on low. Fan speed is on medium. Fan speed is on high. CHAOS Air

NOTICE

☐ CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically changed from high to low or vice versa, depending on the ambient temperature.

Auto Clean

AUTO CLEAN

1. Press the Start/Stop button to Start the unit.
2. Open the door on the Remote Controller Select Cooling Operation or Healthy Dehumidification Operation.
3. Press the Auto clean button.
4. Although the Start/Stop button is pressed, unit operates in Auto clean Mode for 15 minutes - operates in heating operation Mode for 1 minute and circulates the room air without cooling and heating for 14 minutes. And then unit stops operating.

NOTE:

☐ During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy Dehumidification Operation can be removed.
☐ During Auto Clean function, only Start/Stop button, Plasma button and Auto Clean button are available.

Display Luminosity

2ndF AUTO CLEAN

- The Display Luminosity of the unit can be adjusted by using the Remote Controller.

Press the start/stop button to start the unit. Open the door on the Remote Controller, press the 2^nd F button and, press display luminosity button. Display will be dark. Press the button again to set bright display.

Forced Operation

The operation will be started if the power button is pressed without remote controller. If you want to stop operation, re-press the button.

Power button

	Cooling Model	Heat pump Model
		Room Temp. ≥ 24°C	21°C ≤ Room Temp. < 24°C	Room Temp. < 21°C
Operating mode	Cooling Cooling	Healthy Dehumidification	Heating
Indoor FAN Speed	High High	High High
Setting Temperature	22°C 22°C	23°C 24°C

Auto restart

In case the power comes on again after a power failure, the unit operates automatically to the previous operating conditions.

So there is no need of activating this function by pressing any key or button.

In the initial mode, the fan operates at a low speed and the compressor starts about 3 minutes later.

As the compressor starts, the fan speed also resumes its previous setting mode.

In case of absence for a long time while power failure, turn off main power to avoid undesired Auto restart.

Helpful information

Fan speed and cooling capacity.

The cooling/heating capacity indicated in the specification is the value when the fan speed is set to high, and the capacity will be lower at low or medium fan speed.

High fan speed is recommended when you wish to cool/heat the room quickly.

High Speed

Maintenance and Service

Grille, Case, and Remote Control

☐Turn the system off before cleaning.

To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives.

NOTICE

Supply power must be disconnected before cleaning the indoor unit.

AIR FILTERS

The air filters behind the front grille should be checked and cleaned once in every 2 weeks or more often if necessary.

1. Open the front panel as shown.
2. Then pull the filter tab slightly forward to remove the air filter.
3. Clean the filter with a vacuum cleaner or warm, soapy water.
4. If dirt is conspicuous, wash with a solution of detergent in lukewarm water.

5. If hot water (40°C or more) is used, it may be deformed.

6. After washing with water, dry well in the shade.

7. Re-install the air filter.

NEOPLASMA FILTER (Optional)

The NEO PLASMA filter behind the air filters should be checked and cleaned once in every 3 months or more often if necessary.

1. After removing the air filters, pull slightly forward to remove the NEO PLASMA filter.
2. Remove dust with vacuum cleaner or air. (You should not try to wash with water).
3. Note the cuts of electric discharge lines.
4. Re-install the NEO PLASMA filter to the original position.

CAUTION

□ Never use any of the followings:

• Water hotter than 40^ C Could cause deformation and/or discoloration.
- Volatile substances Could damage the surfaces of the air conditioner.

Front panel

Technical illustration of a wall-mounted air conditioner unit with cooling fins and heat sinks (no text or symbols)

Plasma filter

Don't touch this PLASMA Filter within 10 seconds after opening the inlet grille, it may cause an electric shock.

Benzene Podegkin Gasoline

When the air conditioner is not going to be used for a long time.

When air conditioner is not going to be used for a long time.

Operate the air conditioner on Air circulation mode (Refer to page 21) for 2 to 3 hours.

- This will dry out the internal mechanisms.

Turn off the circuit breaker, and disconnect the power cable.

CAUTION: Turn off the circuit breaker when the air conditioner is not going to be used for a long time.

Dirt may collect and may cause a fire.

Remove the batteries from the Remote Controller.

When the air conditioner is to be used again.

Clean the air filter and install it in the indoor unit. (Refer to page 23 for cleaning filters.)

Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.

Operation Tips

Do not overcool the room.

This is not good for the health and wastes electricity.

Make sure that the doors and windows are shut tight.

Avoid opening doors and windows if possible to keep the cool air in the room.

Keep blinds or curtains closed.

Do not let direct sunshine enter the room when the air conditioner is in operation.

Clean the air filter regularly.

Blockages in the air filter reduce the airflow and lower cooling and dehumidifying effects. Clean at least once every two weeks.

Keep the room temperature uniform.

Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in the room.

Ventilate the room occasionally.

Since windows are kept closed, it is a good idea to open them and ventilate the room now and then.

Troubleshooting

Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center.

Case Explanation See page
The air conditioner does not operate.	·Check room temperature setting?	12,15
	·Check if circuit breaker is on?	-
The room has a peculiar odor.	·Check that this is not a damp smell exuded by the walls, carpet, furniture, or cloth items in the room.	-
It seems that condensation is leaking from the air conditioner.	·Check the drain hose is connected tight or if indoor unit is installed even.	-
Air conditioner does not operate for about 3 minutes after turning on.	·This is the protector of the mechanism.·Wait about 3 minutes and operation will begin.·About 3 minutes delay is applied to protect compressor from frequently on/off.	-
Does not cool or heat effectively.	·Is the air filter dirty? See air filter cleaning instructions.	23
	·Has the temperature been set correctly?	12,15
	·Are the indoor unit's air inlet or outlet vents obstructed?	-
The air conditioner operation is noisy.	·For a noise that sounds like water flowing.-This is the sound of refrigerant flowing inside the air conditioner unit.·For a noise that sounds like the compressed air releasing into atmosphere.-This is the sound of the dehumidifying water being processed inside the air conditioning unit.	-
Remote Controller display is faint, or no display at all.	·Are the batteries depleted?·Are the batteries inserted in the opposite (+) and (-) directions?	9
Crack sound is heard.	·This sound is generated by the expansion/constriction of the front panel, etc. due to changes of temperature.	-

LG

Life's Good