BEPOS15 - Cash register Black Ecco - Free user manual and instructions

USER MANUAL BEPOS15 Black Ecco

1> Safety Precautions ----3
2> Initial installation 4
3> The touch screen appearance 5-6
4> Product Description

(1)、Description LCD brand and model and technical parameters 6-7

(2)、Description touchscreen models and technical parameters 8

(3)、Board connectors Figure 9

5> Software Guide

(1)、Touch screen driver installation 10-13
(2)、Touch Settings and Applications 13-16

6> Touch Frequently Asked Questions 17

7> Warranty 18

Safety Precautions

1. Choose smooth and vibration-free table placed cash registers:
   2、Cash registers location should be selected in direct sunlight, temperature changes little, away from water and dust less place;
   3、Please keep away from strong electromagnetic fields payee;
   4、To avoid blocking the vents or cover to avoid internal insert anything inside or fall into the machine. Avoid the danger of electric shock or fire;
   5、Avoid blocking or covering vents, to avoid anything inside or fall inside the machine. Avoid the danger of electric shock or fire;
   6、This product uses standard poles with a grounded wall outlet and can not be changed. It should confirm whether the socket voltage if the voltage on the nameplate matches:
   7、Make sure that the ground prong of the power plug into a power outlet or power strip grounding receptacle and ensure genuine grounding grounding receptacle. If poorly grounded or ungrounded, will result in electric shock, fire or damage to the equipment:
   8、Cash is best not to an outlet with other high-power appliances frequent start sharing power outlet should be located away from the cash register at the close and easy swap for an emergency power off the fastest;
   9、All kinds of cables to connect the device shall ensure conduct in case of power failure, must take good fixing screws. No live-plug cable:
   10、When cleaning the cash register, do not use a wet cloth or chemical wipe the body, such as: gasoline, thinners, etc:
   11、When the cash register fails, immediately turn off the power to stop use, do not open or repair, contact the dealer and cash registers:
   "Warning": for non-compliance with the above issues, as well as non-qualified service personnel or the use of non-local company and designated repair accessories for all the consequences caused by repairs, the company does not assume any responsibility.

Initial installation

1、Unpacking

Upon receipt of the machine should immediately unpacking inspection, if damage should be reported immediately to the transport company claims to manufacturers. After unpacking should also check whether the complete spare parts.

2、Preparing for Installation

Check whether the housing is clean, signs, marking, labeling is correct. Check the work environment: Because the cash register is a precision instrument, before use, check the work environment meets the cash registers around the technical specifications of any discrepancy please do not use cash registers!

3、The main holding operation specifications

Power supply Voltage: 220VAC ±15%

Power: 45W ±15%

Frequency: 50Hz

Temperature Work: 0°C\~40°C

Store: -20^ +55^

Relative humidity 20%\~90% (40°C)

4、Prepare before use

1. Please note that the cable wiring when put the machine to ensure that each wires are neatly fluent.
   2、Power (Note: Be sure to ensure a good supply ground).
   3、System installation (cash registers at the factory with only DOS operating system, customers install before using genuine Windows operating system).

POS Appearance

1 3 2 5 Built-in 2 * 20 LCD customer display 1 2 3 4

1、15-inch five-wire resistive screen
2. Master switch and indicator
3、USB
4,2*20 LCD/VFD customer display
5、Power adapter

Product Description

(1) Description LCD technology parameters;

Size

326mm x 252mm (15.1 inch)

Color	16M
Response time	16ms

(2) Description touch screen technology parameters;

Type	Five-wire resistive
Interface	USB
Power	+5VDC
Work Temperature	0°C~50°C
Store temperature	-40°C~70°C
Relative humidity	95% (60°C)
Precise tolerances	+/- 0.5%
Reaction time	≤35 ms
MTBF	50,000
Touch force	20-120g
Positional deviation	≤3.5 mm
Reaction time	≤5 Millisecond
Certification	CF, FCC, ROHS

(3) Technical parameters

POS Color	Black
Touch Panel	5-Wire Resistive
LCD Panel	15" TFT 1024*768
HDD	32G 64G SSD
COM	2 Interface(Optional:4 interface)
IDE	1 Interface
SATA	2 Interface
USB2.0	8 Interface
Power	AC 100-240V
Chipset	Intel MN10
LAN	Embedded RTL8111C
CPU	Integrated Intel Atom j1900 1.99G
RAM	DDR3 2GB (Support 4GB at most)
Customer Display	2*20 LCD/VFD
POS Printer	Standard configuration does not include optional:58MM or 80mm thermal printer

(3) MAIN Board connectors Figure (J1900)

Close-up of a computer motherboard with visible CPU socket, RAM slots, and connectors (no readable text or symbols)

Close-up of a computer motherboard with visible ports and connectors (no readable text or symbols)

Software Guide

1>Touch screen driver installation

1. Open the random distribution of the CD in the computer
2. Here are the different versions of windows files, select the corresponding system directory. Windows7 most common example:

Debian(for x86)	2011-11-21 15:15
DOS	2011-11-21 15:15
Fedora Core(for x86)	2011-11-21 15:15
iMac OS 9X	2011-11-21 15:15
iMac OS X	2011-11-21 15:15
Mandrake Linux(for x86)	2011-11-21 15:15
Result Linux(for x86)	2011-11-21 15:15
Suse Linux(for x86)	2011-11-21 15:14
Ubuntu Kubuntu(for x86)	2011-11-21 15:14
Win2k_XP_Vista	2011-11-21 15:14
Win7	2011-11-21 15:14
windows 9X ME	2011-11-21 15:14
windows 2000 XP	2011-11-21 15:14
windows CE 2.12 & 3.0	2011-11-21 15:15
windows CE 6.0(RS232 USB)	2011-11-21 15:15
windows CE.NET(RS232 USB)	2011-11-21 15:15
windows CE.NET(RS232)	2011-11-21 15:15
windows CE.NET(USB)	2011-11-21 15:15
windows Embedded	2011-11-21 15:15
windows NT4.0	2011-11-21 15:15
Yellow Dog linux	2011-11-21 15:15

1. Double-click Setup.exe

1. Enter the software installation welcome screen, click Next

TouchKit Welcome to the InstallShield Wizard for TouchKit The InstallShield Wizard will install TouchKit on your computer. To continue, click Next OK Cancel Save Apply Delete Cancel

eGalaxTouch Setup Type Select the setup type that best suits your needs. Extra PS/2 interface driver for eGalaxTouch controller. Please check the check box for PS/2 touch controller. □ Install PS/2 interface driver InstallShield < Back Next > Cancel

Four-point correction settings

Please select Noned

eGalaxTouch Setup Type Select the setup type that best suits your needs. Do 4 point calibrations after system reboot Every system boot up Next system boot up None

Touchkit Setup Type Send the setup type that has any one week. Touchkit I have been done in your home. I want to help me. ✓ Support Web Help for Web OK Cancel Cancel

Click Next

Touch Kit Choose Destination Location Select a list from all files, then Target to access the target folder. To access the folder, then to access the target folder, then to access the folder folder. Access to this folder. C:\Program Files\YouWith Browse... OK Next > Cancel

Click Next and Wait for the installation to complete

Click eGalaxtouch icons

1. Touch panel setting

Windows XP desktop wallpaper showing a green hill under a blue sky with clouds (no text or symbols on the image itself)

Top-Alt - USB Controller Top-Alt Controller General Setting Password Tools About Display Installed To-Income Controller USB Controller Add Cancel Start Start End Start Top-Alt - USB Controller Edge Configuration Settings Settings Hardware Power Frequency Power On Platform Duration Limitation Style Windows 25.0 fps Enable Data Time Duration: 34.0 seconds Enable Data Time Options: Normal Work Options OK Cancel

Starbox1 - Alt CS Star Consensus Hardware Options Design Typing Tools Edit Delete Database Server 4 Points Selection One point algorithm is used in Display Close and Calculate Clear performance parameters and the 4-point configuration Univariate Use Text To default to allow the load accuracy OK Cancel

When you touch the error is relatively large, can be calibrated(linearization)

Please check to check "X" with the following:

AutoCAD - AutoCAD File Edit View Tools Help Interpretation Curve Interpretation 4 points call to us completed from 2013 to continue. OK In addition D:\25 points bit addition for better touch screen Hotkey Download not to add the touch screen.

Press OK Calibration

Touch FAQ

Contact with the cursor position do not match

Run Touchkit monitor calibration software

h the system sound or unvoiced

Right-click on the system tray Touchkit icon, the pop-up options related "Sound Settings" (Note: The sound on the premise that the system motherboard must contain the buzzer)

Desktop mouse appear square or similar appearance (shape depending on the drive icon on the version) icon, the user operates the affected eye

Right-click on the system tray Touchkit icon, the pop-up options in the "button" setting

Touch failure or intermittent malfunction

Turn off the system's power-saving mode USB device, re-plug the USB Interface

The cursor always stays at a certain position

Check that the cursor is near the resistive screen surface scratches, hit other marks

Warranty

1» warranty

Your purchase our touch screen products (including accessories) from the enjoyment of the following rights:

1. Standard products enjoy 3 month free replacement;
2. 12 month warranty;

2》 Non-warranty

1. Not in accordance with the requirements of the customer specification, improper installation, storage and use of resulting products (including peripherals) failure or damage;
2. Due to damage caused by accident, abuse, dismantle repairs or modifications, into the oil, water, etc. caused by the products (including peripherals) failure or damage;
3. Due to unexpected factors or man-made reasons (scratches, handling, bump, improper input voltage and current, etc.) lead to products (including peripherals) fault or damage (including appearance);
4. Product failure or damage due to natural disasters and other force majeure (such as earthquakes, fire, etc.) causes;
5. Product failure or damage caused to the environment due to the use of oxidation products, short circuit and other causes:
6. Bar code has been altered, deleted, lost, mobile or other products can