LWT1210 - Washing machine Kleenmaid - Free user manual and instructions

Product Type	Front-Loading Washing Machine
Brand	Kleenmaid
Model	LWT1210
Capacity	10 kg
Dimensions (H x W x D)	850 x 600 x 600 mm
Weight	80 kg
Power Supply	220-240 V ~ 50 Hz
Power Consumption	2000 W
Energy Class	A++
Spin Speed	1200 rpm
Number of Programs	15
Temperature Range	Cold to 90°C
Display	LED
Delay Start	Up to 24 hours
Child Lock	Yes
Drum Material	Stainless Steel
Noise Level (Wash)	52 dB
Noise Level (Spin)	74 dB
Water Consumption	50 L per cycle (approx)
Annual Energy Consumption	220 kWh (approx)
Annual Water Consumption	9000 L (approx)
Warranty	2 years
Included Accessories	Inlet hose, drain hose, instruction manual

Frequently Asked Questions - LWT1210 Kleenmaid

How do I clean the filter?

Open the filter cover at the bottom right, unscrew the drain filter slowly to avoid water spillage. Clean out lint and debris, then reinsert and tighten. Ensure it is properly secured to avoid leaks.

What is the maximum spin speed?

The maximum spin speed is 1200 rpm. You can adjust the spin speed for different fabrics; higher speeds provide better drying but may crease delicate items.

Can I use liquid detergent?

Yes, you can use liquid detergent. For best results, use the detergent drawer's liquid compartment or a dosing ball. Avoid overfilling to prevent residue.

How do I activate the child lock?

Press and hold the Child Lock button (usually indicated by a padlock icon) for 3-5 seconds until the indicator lights up. Repeat to deactivate. This prevents accidental button presses during operation.

What should I do if the machine doesn't start?

Check that the power cord is plugged in, the door is fully closed, and the water supply is turned on. Also ensure the program dial is set correctly. If the issue persists, consult the manual.

How do I fix an unbalanced load?

Pause the cycle and open the door. Redistribute the laundry evenly to avoid unbalanced load. Overloading or washing single heavy items often causes this. Run a spin-only cycle after adjusting.

What is the energy efficiency rating?

This model has an energy efficiency rating of A++, meaning it is highly efficient. It consumes approximately 220 kWh per year under standard use, saving on electricity bills.

How do I descale the machine?

Use a descaling agent designed for washing machines. Pour it into the detergent drawer and run a hot empty cycle (90°C). Repeat every 3-6 months to prevent limescale buildup.

What should I do if the door won't open?

Wait for the door lock to release after the cycle ends (usually 1-2 minutes). If stuck, check if the machine has water left; run a drain program first. Do not force the door.

How do I install the machine?

Remove all transport bolts at the back. Level the machine using the adjustable feet, ensuring no rocking. Connect the inlet hose to a cold water tap and the drain hose to a standpipe or sink. Plug into a grounded outlet.

USER MANUAL LWT1210 Kleenmaid

Instructions for use and warranty details

Dear Customer,

Thank you and congratulations for choosing Kleen maid.

Your new appliance has been designed and meticulously tested to ensure that it meets all your culinary requirements, and has been carefully manufactured using top quality materials to give you years of reliable performance.

For best results, carefully read the instructions on how your new appliance is to be installed. Correct installation will avoid delays and unnecessary service call costs.

Once installation is complete, please read this instruction manual carefully and get to know the controls and the features of your new Kleenmaid appliance. These simple instructions will enable you to achieve excellent results from the very first time you use it.

CONTENTS

SAFETY INSTRUCTIONS

■ Safety Instructions .... 4

INSTALLATION

■ Product description 7
■ Packing the washing machine 8
■ Unpacking the washing machine 8
■ Installation area 8
■ Installing the drain hose 9
■ Levelling the washing machine 9
■ Connecting the inlet hoses and tap 10

OPERATIONS

■ Preparing the washing machine....11
■ Washing 11
■ After washing.... 11
■ Preparing clothes/wash load 12
■ Using detergent, washing powder & additives.... 13
■ Control panel 14
■ Options.... 15
■ Personalized setting of washing program.... 16
■ Operation of washing processes.... 16

SAFETY INSTRUCTIONS

■ General safety instructions

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to be Xsed and old hose-sets should not be reused.
  • The openings must not be obstructed by a carpet.
  • This appliance is intended to be used in household and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• farm houses;
• by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
• areas for communal use in blocks of flats or in launderettes.

Explanation of the symbols:

Warning!

This combination of symbol and signal word indicates a potentially dangerous situation which may result in/death or serious injuries unless it is avoided.

SAFETY INSTRUCTIONS

Warning!

Electrical Safety Precautions

• This appliance is for indoor use only.
- Do not install the washing machine in a humid place.
- Hands should not be inserted into the tub whilst it is spinning.
- If the tub does not stop spinning within 15 seconds of opening the lid during a spin cycle please stop using the machine and have it repaired.
- Before any maintenance is performed upon this washing machine, unplug the appliance from the mains electricity supply.
- Always unplug the machine and turn off the water supply after use. See the max/min. inlet water pressure in the Technical Specifications table on page 21.
- To ensure your safety, the power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed.
- The water and electrical devices must be connected by a qualified technician in accordance with the manufacturer's instructions and local safety regulations.

Child Safety Precautions

• This appliance is not intended for use by persons ^[1] (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
  Check the washing before any operation to arrange animals or children have not achieved

SAFETY INSTRUCTIONS

Caution!

Installation Safety Precautions

• This washing machine is for indoor use only.
• It isn't intended to be built-in.
• The openings must not be obstructed by a carpet.
• Washing machine shall not be installed in bathrooms or very wet rooms or in rooms with explosive or caustic gases.
• Remove all packaging before using the appliance, otherwise serious damage may result. Retain solid grey plastic base from packaging and attach it to the base of the appliance prior to installation.
• The washing machine has double inlet valves and should be correctly connected to the hot and cold water supply.
• Plug must be accessible after installation.

To avoid damaging the appliance

• Your product is only for home use and is only designed for textiles suitable for machine washing.
  • This machine is not intended for washing carpets
• Do not climb up and sit on the top cover of the machine.
• Do not lean against machine lid.
• Please do not close the lid with excessive force.

Cautions when handling this appliance:

INSTALLATION

■ Product Description

Product Description Handle Knob Control Panel Lid Water inlet valves Power cord Filter holder on tub wall Water/Spin tub Wash/Spin tub Drain hose Impeller Cabinet Adjustable foot Cabinet handle

INSTALLATION

■ Packing the washing machine

graph LR
    A["3D Box"] --> B["Computer Interface"]
    B --> C["3D Cube"]

■ Unpacking the washing machine

Warning!

• Packaging material (e.g. Film, Styrofoam) can be dangerous for children.
  • There is a risk of suffocation. Keep all packaging well away from children.

• Remove the cardboard box and styrofoam packing.

• Lift the washing machine and remove and retain the base packing.
• Remove the tape securing the power supply cord and drain hose.
• Remove the hoses from the drum.

graph LR
    A["3D Cube"] --> B["Box with Arrow"]
    B --> C["Box"]

NOTE: Retain the solid grey plastic base from the packaging (stored at the top of the carton). After the foam stabilisers are removed from the base of the machine attach the plastic protective base to the bottom of the appliance, using a slide in action and one screw. Retain the foam stabilisers if it is expected that the

INSTALLATION

■ Installing the drain hose

1. Connect the end of the supplied drain hose to the drain outlet on the lower back of the washing machine.
2. Fix and tighten it firmly with the supplied hose clamp. See figure on right.

■ Positioning the drain hose

See the diagrams below for minimum and maximum heights for positioning the drain hose. Ensure the drain hose is not kinked, crushed or stretched.

Trough Hose Retainer Bind Min. 86cm Max. 100cm

⚠ Warning!

Do not kink, crush or stretch the drain hose. Position the drain hose properly, or damage may result from water leakage. During the initial empty cycle (see p11) check for water leakage from the drain outlet/drain hose and tighten the hose clamp if necessary.

⚠ Warning!

The installer of this washing machine must adhere to the installation instructions below before the machine is first operated. It must be levelled accurately during

Close-up of a car's front wheel rim and dashboard (no visible text or symbols)

Your washing machine will not work correctly if the drum is too far forward.

Close-up of a white car front bumper with a circular vent and a green badge (no visible text or symbols)

Your washing machine will work correctly if the drum is aligned as in the image.

Close-up of a white washing machine with a circular vent and a red X mark on the side (no text or symbols visible)

Your washing machine will not work correctly if the drum is too far back.

1. Once the correct alignment is achieved, press down on all 4 corners of the machine to ensure that no rocking motion is possible, then lock the feet into position by tightening the lock nuts up against the machine. See diagram at right.

Lock nut Foot LockLoosen Raise Lower Correct Incorrect

■ Connecting the inlet hose and tap

Connection between screw tap and inlet hose.

OPERATION

■ Preparing the washing machine

Caution!

Before washing please ensure the machine is installed correctly. Before washing a load of clothes for the first time, operate the empty washing machine for one whole cycle. Check for water leakage from the drain outlet/drain hose and tighten the hose clamp if necessary. The washing machine should be used in ambient temperatures of 0-40°C. If used under 0°C the inlet valve and drainage system may be damaged.

■ Washing

OPERATION

■ Preparing clothes/wash load

• Please check the clothing care labels and the directions for detergent use before washing.
• Use non-foaming or low-foaming detergent suitable for top load washing machines.

Check the label for care instructions

Take all items out of the pockets

Tie cords and close zips and buttons

Place small items into a protective washing bag

Turn fabric which pills or has long pile inside out

Separate clothes with different textures, types and colours eg separate whites from colours; separate permanent press clothing; and don't wash together clothes of substantially different size, weight or texture, such as sheets, shirts and jeans, in the same load.

■ Loading the washing machine

1. Prepare and sort the clothes as indicated above.
2. Do not tip or pile all the clothes or linens in the center of the washing machine. Add

⚠ Warning!

• Washing only a single item may cause the machine to become unbalanced during the cycle. It is recommended that a few other items be included in the load so the machine functions smoothly.
• Don't use the machine to wash clothes spotted or saturated with kerosene, petrol, alcohol or other flammable materials. These materials and pre-treatment sprays or liquids can also cause damage to the control panel, paintwork and components of your washer.

■ Using detergent, washing powder & additives

• Liquid detergent should be placed into the blue insert marked Detergent. Dilute washing powder or powdered additives with a little warm water before adding to the detergent dispenser to prevent the inlet of the dispenser becoming blocked and overflowing while the machine is filling with water. If you choose to use undiluted washing powder please remove the blue insert and add the powder directly to the section marked Powder. Clean the dispenser drawer regularly. See Cleaning the dispenser drawer p18.
• Please choose a low foaming or non-foaming detergent suitable for top load machines, and for the selected washing temperature, to optimize washing performance with less water and energy consumption. If you normally wash with cold water, it's recommended that a 'Warm' or 'Hot' wash be used at regular intervals.
• If used, add bleach to the bleach dispenser prior to starting the wash cycle. Use a small amount of bleach and dilute with twice the volume of water. Rinse clothes well to avoid skin irritation.
• Do not pour bleach onto clothes. Read and carefully follow the directions and warnings regarding the use of bleach on the product. It is recommended that bleach only be used for washing white fabrics. Do not mix bleach and detergent. DO NOT use your washer to soak items in bleach or sanitiser, The chemicals in these products are corrosive and may damage your washer. Clean the dispenser drawer regularly. See Cleaning the dispenser drawer p19.

OPERATION

■ Control Panel

ON/OFF Start/Pause Speed Clean Water Level Temperature Max High Med Low Hot Warm Cold 2 1 8 7 6 Quick Normal Jeans Mix Whites Colours Synthetic Intensive 3 Delicate Baby/Allergy 8:00 Delay Soak Wash Rinse Spin 5 4 Rinse Spin

Note!

This diagram is for reference only, please refer to your appliance control panel.

On/Off

Product is switched on or off.

Start/Pause

Press the button to start or pause the washing cycle.

Program

Rotate to select program.

D: 0.5

Temperature

Press the button to manually select the wash temperature.

Water Level

After program selection, press the water level button to manually select the water level for the wash.

Speed Clean

OPERATION

Options

-Child Lock

If you want to lock all the buttons to prevent settings from being changed by children you can activate the Child Lock function. NB. Power button is still active when child lock is on.

How to Lock

1. Press the Power button to turn power on.
2. Press the Start/Pause button to start washing.
3. Press and hold the Rinse and the Spin buttons simultaneously until there is a beep and the child lock icon on the display lights up. NB. Power button is still active when child lock is on.

How to Unlock

If you want to turn off the child lock during the wash cycle press the Rinse and Spin buttons simultaneously again until the machine beeps and the childlock display light goes off.

① Caution!

When the lid is opened during machine operation, the buzzer will beep continuously. If the lid is left open more than 1 hour, the machine will shut down automatically. To resume the wash cycle if error code E3 appears close the lid and press Start.

Speed Clean System

1. Press the Power button to turn power on.
2. Turn the Program Knob to select "Normal", Jeans", "Mix", "Whites" or "Colours" program.

OPERATION

■ Intelli-wash Automatic Operation

The user selects any of the following programs: Normal, Jeans, Mix, Whites or Colours then presses the Start/Pause button. The Intelli-wash feature will choose the water level and the selected program will run automatically using cold water. If desired, the user can additionally select the water temperature and allow Intelli-wash to choose the appropriate water level. The user may also select a water level but this will cancel the Intelli-wash feature.

■ Personalized setting of washing program

Users can select and customise washing programs, by setting rinsing time, spinning time, water volume and delayed starting time.

graph LR
    A["On"] --> B["Program"]
    B --> C["Water Level"]
    C --> D["Temp."]
    D --> E["Rinse"]
    E --> F["Spin"]
    F --> G["Delay"]
    G --> H["Start"]

■ Operation of washing processes

Users can set a single process or combinations of rinsing and spinning freely according to demand. Detailed operations as follows:

Spin Only Function

OPERATION

■ Washing Program Applications

Program

Programs are available according to the laundry type. See Separating clothes p12

Programs	(Default program time without options - hours:mins)
Normal	Standard fabric washing program suitable to wash cotton fabric with one wash cycle, two rinse cycles, and a long spin time. (1:18)
Jeans	Suitable to wash Jeans. (1:13)
Mix	Suitable to wash mixed load consisting of textiles made of cotton and synthetic. See Separating clothes p12 (1:11)
Whites	Suitable to wash white clothes. (1:13)
Colours	Suitable to wash coloured clothes - set to protect the colours. (1:07)
Synthetic	Wash synthetic articles eg shirts, coats, fabric blends. (1:05)
Intensive	Use this program when washing heavy duty clothes eg, work clothes and blankets. (1:24)
Handwash	A gentle wash program to protect hand-washable (1:09) textiles.
Baby/Allergy	Suitable to wash children's clothes. (1:28)
Delicate	Use this program for washing woollens, delicate items (1:07) or clothes that only require a light wash.
Sheets	Suitable for washing sheets and bed linen. Add articles (1:54)

OPERATION

■ Program Details

Washing Time (mins)	Number of Rinse Cycles	Spin Time (mins,default)	Total Program Duration (hrs/mins)	Program Duration - Speed Clean (hrs/mins)	Intelli-wash Applies?	Extra Rinse Available?
14 2		0.5,7,9,11	1:18	1:02 YES YES
14 2		0.5,7,9,11	1:13	1:03 YES YES
14 2		0.5,7,9,11	1:11	1:01 YES YES
18 2		0.5,7,9,11	1:13	1:01 YES YES
12 2		0.5,7,9,11	1:07	0:59 YES YES
10 2		0.5,7,9,11	1:05	- -		YES
25 2		0.5,7,9,11	1:24	- -		YES
14 2		0.5,7,9,11	1:09	- -		YES
14 3		0.5,7,9,11	1:28	- -		YES
12 2		0.5,7,9,11	1:07	- -		YES
18 3		0.5,7,9,11	1:54	- -		YES
18 3		0.5,7,9,11	1:54	- -		YES
-	1	0.5,7,9,11	0:28	- -		YES
12 2		0.5,7,9,11	1:39	- -		YES
0:47		-		-	-	-
6 1 5	0:35	-		- - -

MAINTENANCE

■ Cleaning and care

⚠ Warning!

- Before commencing maintenance, please unplug the machine and turn off the tap.

■ Cleaning the cabinet

Proper maintenance of the machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a cloth to wipe it off immediately. Sharp items should not be used when cleaning the machine.

Note!

- Formic acid and its diluted equivalents such as alcohol, solvents or chemical products etc., should not be used to clean this appliance.

■ Cleaning the filters

Note!

- Inner filter must be cleaned if the water flow decreases.

Cleaning the inlet filter:

1. Screw off the inlet pipe from the back of the machine.

2. Pull out the filter with long nose pliers and

MAINTENANCE

■ Trouble shooting

If this appliance does not start or it stops during operation use the information here to try to find a solution. If the issue is cannot be resolved, contact a service centre. Please see the instructions on the back cover to request a warranty service. You will need the Model Code (LWT1210) and individual Serial Number which is found on the Rating Label at the top left corner on the back of the machine.

Description	Inspection to check:
Washer doesn't start	If the power is off or the fuse is burned out.If the power supply voltage is too low.If the water amount reaches to the required water level.(The washer will not work if the water amount does not reach the required water level)If it is set to "Delay" washing mode. (It will only start to work once the selected time is reached)
No water flows in	If the power is off or the fuse is burned out.If the water supply is cut off or the water pressure is too low.If the inlet hose is properly connected and the water tap is turned on.If the filtering screen of the inlet valve is blocked by dirt.If the coil of inlet valve is damaged. (The slight electromagnetic sound is normal when the inlet valve is switched on.)If the "Start / Pause" button is pressed after the power switch is pressed.
Abnormal draining	If the water drain hose is placed very high.If the end of the water drain hose is kinked or crushed.If the internal rubber ring of the drain valve is blocked by dirt.
Abnormal spin	If the lid is closed.If items in the washer are unevenly distributed.If the washer is not placed on a stable surface, the floor is not flat, or the feet are not correctly adjusted.

MAINTENANCE

■ Technical Specifications

Standard Water Pressure Grade of waterproof
0.03MPa~0.8MPa		IPX4
Model	Washing Capacity	Dimension (W*D*H)mm	Net Weight	Rated input power	Power Supply
I.WT1210	12.0kg	640*684*1085	53kg	550W	230-240V~,50Hz

■ Water Temperature Specifications

Water input temperature (cold)	1°C - 20°C
Water input temperature (hot)	1°C - 60°C

Technical Information

■ Energy efficiency test program:

This is identified as follows for LWT1210: Normal washing program where Water level is Max level, and wash temperature is warm.

KLEENMAID WARRANTY

TERMS AND CONDITIONS

1. Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid will provide parts and labour to you the customer as set out herein.
2. Kleenmaid may engage a Service Agent to provide service under this warranty.
3. Kleenmaid's Products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
4. The benefits given to you under this Kleenmaid Warranty are in addition to other rights and remedies to which you may be entitled under the Australian Consumer Law in relation to the Product to which this Kleenmaid Warranty relates. Subject to the conditions below, the Product is warranted by Kleenmaid and/or its agents to be free from defects in materials and workmanship for the Warranty Period for normal Domestic Use.
5. Product Identification:

a. Kleenmaid reserves the right to reject claims for any services or work where you cannot produce for verification the serial number and a proof of purchase for the Product (including but not limited to the original invoice).

b. this Kleenmaid Warranty will be voided if the serial number for the Product cannot be verified. This is not intended to exclude, restrict or modify any right or remedy to which you may otherwise be entitled under the consumer guarantee provisions of the Australian Consumer Law.
c. in the event that a request for repair is made against this Kleenmaid Warranty where the serial number for the Product cannot be verified or you cannot produce for verification a proof of purchase for the Product (including but not limited to the original invoice), the repairer will not carry out any repairs on the Product and you will be charged a service call-out fee.

1. What is covered by this Kleenmaid Warranty:

a. the Product is covered for faulty workmanship or parts that have failed under normal Domestic Use.
b. Kleenmaid and/or its agents will determine by objective testing if there are any defects in the Product and/or faulty workmanship.
c. this Kleenmaid Warranty is only applicable if repairs on Products are carried out within Mainland Australia.
d. this Kleenmaid Warranty:

i. covers a Product purchased as new, manufactured for use in Mainland Australia;

ii. commences from the date of delivery of the Product:
iii. provides for the labour and replacement parts necessary to maintain the Product in good operating condition as specified in this Kleenmaid Warranty, however, if repair is needed because of Product failure during normal Domestic Use, Kleenmaid has the option to repair or replace the defective Product or part of the Product with a product or part of like kind and quality. A replacement part may be new or reconditioned of like kind and quality and may cost less than the original Product purchased and no charges or refunds will be made based on the replacement product or part cost difference; and

iv. is only applicable when the Product is used and operated in accordance with the Manufacturer's instructions.

1. What is not Covered by this Kleenmaid Warranty (excluded):

a. any damage or failure to or of the Product or part of the Product:

i. due to the Product being inadequately serviced to manufacturer's recommendations;
ii. resulting from environmental conditions including and not limited to dirt, dust, rodents, insects, rust, corrosion, salt built-up, of or in any part of the Product;
iii. resulting from excessive use but fair wear and tear is excepted;

1. Service under this warranty may be limited by the area in which you live. Service to remote and regional areas may incur additional travel costs which will be payable by you. You will be advised of this at the time you make a claim and Kleenmaid arranges to attend your premises.
2. Neither Kleenmaid nor its representatives provide loan equipment under the terms of this Kleenmaid Warranty.
3. Any unauthorised access to the internal hardware of the Product will void this Kleenmaid Warranty.
4. Repair Notice: Products presented for repair may be replaced by refurbished Products of the same type rather than being repaired. Refurbished parts may be used to repair the Products.
5. Replacement items are "like for like" and is not "new for old" and does not indicate in any way that a faulty Product will be replaced with a new part or unit. "Like for like" may either be a quality checked, refurbished or reconditioned unit of the same or later batch of model/size/specifications
6. The cost of making a claim under this Kleenmaid Warranty is not covered by Kleenmaid, including any costs of transportation or travel expenses between your home and your nearest authorised service agent.
7. Kleenmaid accepts no liability for items that are lost, damaged, or stolen as a result of freight, transport or storage. If you are required to transport the Product to an authorised service centre, you must ensure that it is securely packed and insured.
8. On Public Holidays or other periods when regular business and wholesale operations are temporarily ceased, repair availability and warranty response times may extend beyond the standard response times due to the unavailability of repairers and parts.
9. For any repair performed on a Product under this Kleenmaid Warranty where no fault can be found, or the item is deemed by Kleenmaid or an authorised agent, to be not faulty under this Kleenmaid Warranty, or the repair or fault is not covered under this Kleenmaid Warranty. a 'No Fault Found' fee is payable by you. Kleenmaid will advise you of this cost and seek your agreement to pay such costs before commencing such repairs.
10. Any repairs or services required that are outside the terms and conditions of this Kleenmaid Warranty can be carried out at your request at your cost (including where the Product has not been installed or set up correctly). Kleenmaid will always advise you of this cost and seek your agreement to pay such costs before commencing such repairs. A credit card may be required prior to the commencement of such services.
11. Extra charges will be payable by the customer should the Product not be readily accessible without special equipment, such as but not limited to cranes and lifts or should the Product be installed in a position that service access is blocked and/or repair work is not possible without uninstalling the Product to gain access.
12. You, the customer, may be entitled to purchase an extended warranty in respect of the Product. Any extended warranty will not be issued by Kleenmaid but by a third party. Any extended warranty services will be provided directly by the third party as principal and not as agent for Kleenmaid, under their extended warranty terms and conditions and not under this Kleenmaid Warranty.
13. To make a claim under this Kleenmaid Warranty, please have your proof of purchase and the serial number of the Product ready and call [phone] during business hours.
14. This Kleenmaid Warranty is given by:
    Name: Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid
    Business address: Level 2, Suite 3, 204 Botany Rd, Alexandria NSW Australia 2015
    Telephone: [phone]
    a. Australian Consumer Law means the Competition and Consumer Act 2010 (Cth).
    b. Domestic Use means use of the Product for personal, domestic or household purposes.
    c. Kleenmaid means Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid.
    d. Mainland Australia means the following States and Territories of Australia: New South Wales, Victoria, South Australia.
    Western Australia, Queensland, Tasmania, Northern Territory, Australian Capital Territory
    e. Product means the appliance sold by Kleenmaid to you as evidenced by the original purchase invoice.
    f. Service Agent means any independent service agent engaged by Kleenmaid to carry out any repair or service under this warranty.
    g. Warranty Period means for domestic use and for Products purchased on or after 1 January 2019 the period of 60

23. Definitions:

Other products available in the Kleenmaid range of appliances

1 Washing machines
Clothes dryers
1 Dishwashers
| Ovens
1 Cooktops
| Steam ovens
Microwave ovens
Built in espresso coffee machines
1 Rangehoods
Freestanding ovens
1 Refrigerators & Freezers
1 Beverage Serving Cabinets
Water Dispensers
| Vacuum Cleaners

To register your warranty or make a warranty claim, scan this QR code:

QR code image containing encoded data, no visible human-readable text

Compass Capital Services Pty Limited trading as Kleenmaid ABN 96138214525

Level 2, 204 Botany Road Alexandria NSW 2015

AUSTRALIAN OWNED CERTIFIED #01518

Register your Kleenmaid Appliances Warranty www.kleenmaidwarranty.com.au

Request a Warranty Service www.kleenmaidwarranty.com.au

E: [e-mail] Please download the current User Manual for this appliance at www.kleenmaid.com.au

Kleenmaid