CBA-C4 - Charger Watson - Free user manual and instructions

USER MANUAL CBA-C4 Watson

AC Adapter and DC Coupler Kit

Owner's Manual

THANK YOU FOR CHOOSING WATSON

The Watson AC Adapter and DC Coupler Kit delivers continuous power to your camera, so you won't need to replace batteries. Attach the AC adapter to a regular wall outlet and pop the DC coupler into your camera. You'll have a continuous power source allowing extended shooting, so you won't have to disrupt your workflow.

PRECAUTIONS

• The Watson AC Adapter and DC Coupler Kit should be used only with compatible devices specified in this manual.
• If you notice smoke, noise, or an unusual smell from the AC Adapter and DC Coupler Kit, discontinue use immediately. Remove the AC Adapter and DC Coupler, and take the devices to a Watson authorized reseller.
- Remove the AC Adapter and DC Coupler when not in use.
- Do not attempt to disassemble.

• Keep fingers clear of contact with the prangs of the AC plug and AC outlet, and use caution when inserting or removing the AC plug from the AC outlet. If the prangs of the AC plug are bent, they can become a back-bossed.
• Avoid exposing this product to water or extreme humidity, and keep it in a cool, dry place.
• Keep out of reach of children.
• All images are for illustrative purposes only.

CONNECT THE DC COUPLER TO THE AC ADAPTER

Depending on your model, you will need to make one or both of these connections.

Insert the AC adapter's plug into the DC coupler.

4

Insert the DC coupler's plug into the AC adapter's socket.

Diagram of a connector with a yellow arrow indicating direction, no text or symbols present

INSERT THE DC COUPLER INTO YOUR CAMERA

Note: If the battery chamber door has no cord slot and isn't removable, leave the chamber door open.

6

Diagram showing a U-shaped tube connected to a plug with a power outlet, indicating electrical or electrical connection.

ONE-YEAR LIMITED WARRANTY

The Wilson products are needed to the origin of purchase to be from the risks in making a and working and working normal consumer before a period of one (1) year from the prior year, or more than three (2) years, either replacement which ever occurs after. The warming product's request will be required to be clinical warming on the limited side principal treatment, as well as a description of any product that helps screen the lower end of the product in its intended manner and its intended environment. In particular, the product or partial shall be recombined by the warming provider. If the product has been discontinued, the wear and proper resources are right possible with a model of a specified quality and function.

This warranty is not to be damaged or defect due to failure, neglect, accident, interruption, share improper retail dealer treatment. Except as PROVIDED THEN, THE WARRANTY PROCIMATES NUTHER ANY EXPRESS WARRANTIES PER ANY INDEPENDENT HOLDINGS LIMITED TO ANY INDEPENDENT WRITTEN AS HELLY YOUR ITEMS FOR A PARTICULAR PURPOSE. This warranty provides goodwill specification rights and may not be distributed in any way to translate its status.

To state in name or coverage, contact the Wilson Customer Service Department for whom and are merchandise authorisation (WHA) number, and return the defective product to version along with the FHA number and proof of purchase. Shipment of the defective product is at the purchase's own risk and expense.

For more information or to arrange services, which is a Mahangkar.com or call Customer Service at 212-591-2053

Product warranty provided by the Canadian Group.

www.gesagroup.com

Valeant aerogland trademark of the Group.

As the information on the request of their rights in tenors.

WATSON

1. Stock Group Inc

www.poweredbywatson.com © 2021 Gradus Group LLC. All Rights Reserved.