71017 - Case iPort - Free user manual and instructions

Brand	iPort
Model	71017
Product Type	Protective Case with Charging
Compatible Devices	iPad (specific model not specified)
Material	Durable polycarbonate
Color	Black (assumed)
Charging Method	Pass-through via Lightning cable and USB-A
Cable Management	Retention clips inside case
Security	Lockable corners with included lock tool
Mounting Compatibility	iPort BaseStation and WallStation (sold separately)
Orientation	Portrait and landscape
Installation	Tool-less assembly with included lock tool
Removal	Pull shell from bezel using lock tool
Included Accessories	Lock tool, security locks
Dimensions	Not specified
Weight	Not specified
Safety Warnings	Contains magnets; keep away from magnetic sensitive objects and pacemakers
Cleaning Instructions	Not specified; clean with soft dry cloth
Warranty	See iportproducts.com/warranty
Support	Visit iportproducts.com/luxeport or call [phone]

Frequently Asked Questions - 71017 iPort

How do I install my iPad into the iPort 71017 case?

First, use the lock tool to pry the shell apart from the bezel. Insert the Lightning cable into the iPad, then insert the iPad camera-side first into the bezel. Secure the iPad by sliding the two retaining clips toward the center. Finally, connect the USB-A cable to the shell and snap the shell onto the bezel, ensuring tabs align.

How do I remove the iPad from the case?

Unlock any security locks. Insert the lock tool into the side holes and pry the shell apart from the bezel. Then slide the two retaining clips away from the iPad to free it from the bezel.

Can I charge the iPad while it is in the case?

Yes, the case has a pass-through charging design. Connect the Lightning cable to the iPad and route it through the cable retention clips, then plug the USB-A cable into the shell's USB port.

How do I attach the case to a BaseStation or WallStation?

Place the case in portrait or landscape orientation on the station, ensuring it is properly seated for secure mounting and charging. The case can be charged in either orientation.

How do I lock the case to a BaseStation?

Use the provided lock tool to turn the screws in the top two corners counterclockwise until they stop. This will lock the case to the station. To unlock, turn clockwise.

What safety precautions should I be aware of?

The case contains magnets. Do not place it near magnetic sensitive objects like credit cards or hard drives. Persons with pacemakers should keep distance. Always use the product as directed.

Where can I find the warranty information?

Warranty details are available at iportproducts.com/warranty.

What is included in the box?

The package includes the iPort case (bezel and shell), a lock tool, and security locks.

Is the case compatible with all iPad models?

The manual does not specify exact models, but it is designed for standard iPads. Check compatibility details on iPort's website or contact support.

How do I clean the case?

Cleaning instructions are not provided. We recommend wiping with a soft, dry cloth. Avoid harsh chemicals.

USER MANUAL 71017 iPort

INSTALLING IPAD INTO CASE
Step 1
Insert the lock tool in the side holes where indicated and pry shell apart from bezel by rotating the end of the lock tool towards you.

Step 2
Pull the shell apart from the bezel.

Step 3

Insert the Lightning cable into the iPad.

Step 5

Use a flathead screw driver or the security tool to slide the two retaining clips toward the center of iPad. This will secure the iPad to the Bezel.

Step 4

Insert iPad into the Bezel, camera side first. Insert the cable into cable retention as shown.

Step 6

Insert the USB A cable into the USB port on the Shell.

While attaching the Shell place the cable in the second retention clip on the inside of the Shell.

Step 7

Align the tabs of the Shell making sure the opening for the camera is aligned properly. Press each corner until all tabs securely snap into place.

Step 8

Use the provided lock tool to lock the top two corners of the Case. Turn screws COUNTER CLOCKWISE until stop.

*Note If intending to lock your Case to a BaseStation, ensure to also lock Case.

ATTACHING CASE TO

BASESTATION & WALLSTATION

Place the Case In Portrait or Landscape. Ensure the Case is properly seated for secure mounting and charging.

Case can be charged in portrait or landscape on both the WallStation and BaseStation.

Dismount Case by pulling from left or right side.

Lock Case to BaseStation if desired using lock tool.

REMOVE IPAD FROM CASE

Step 1

Unlock the security locks if applied. Insert the lock tool in the side holes where indicated and pry shell apart from bezel by rotating the end of the lock tool towards you.

Step 3

Slide the two retaining clips away from the iPad to free the iPad from the LuxePort Bezel.

Step 2

Pull the shell apart from the bezel, revealing the back of the iPad.

For more help and info please visit: lportproducts.com/luxeport

iPort

991 Calle Amanacer

San Clemente, CA 92673

United States of America

[phone]

CAUTION: This product contains

magnets. Do not place in direct

proximity with magnetically sensitive

objects such as credit cards or

exposed hard drives. Persons with

pace makers are the

CAUTION: Use products as directed.

Unspecified use could result in injury.

Warranty can be found at

iportproducts.com/warranty

33-7054