MAES1173 - Système de connexion multimédia JUNG - Free user manual and instructions
Find the device manual for free MAES1173 JUNG in PDF.
User questions about MAES1173 JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Système de connexion multimédia in PDF format for free! Find your manual MAES1173 - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MAES1173 by JUNG.
USER MANUAL MAES1173 JUNG
Multimedia connection system
Ref.-no.: MA..
Operating Instructions
Multimedia connection system
natural_image
Close-up of a white electrical socket with three colored pins (no text or symbols visible)1. Safety instructions
Electrical equipment must only be installed and assembled by qualified electricians.
Always follow the relevant accident prevention regulations. Failure to comply with these instructions may result in damage to the device, fire or other hazards.
Proper signal transmission is only ensured when the appropriate accessories are used and the specified maximum cable lengths are observed, as well as the minimum permissible distance of 0.3m from current-carrying cables and sources of interference (electronic ballasts, dimmers, ESLs, etc.) are observed.
These operating instructions are an integral component of the
JUNG
Multimedia connection system
Ref.-no.: MA..
3.1. Connecting multimedia devices
- Insert connector of the connecting cable from the signal source, e.g. from a DVD or MP3 player, into the jack of multimedia socket.
- Insert connector of the connecting cable from a playback device, e.g. from an LCD/plasma television or stereo system, into the jack of a second multimedia socket.
① Insert connectors into the jacks straight and without using force. Twisting or tilting the connector may deform the contacts.
Application examples
| Connection | Devices |
| Cinch | Audio systems, AV receivers, active loudspeakers |
| S-Video | SAT receivers, televisions, projectors, iPod docking stations, video cameras |
| USB | iPods, printers, storage media, digital cameras |
| TRS3.5 mm | MP3 players, CD/DVD players, sound cards, audio systems |
| VGA | PCs/laptops, projectors, monitors |
| HDMI | High definition plasma/LCD televisions, SAT receivers, projectors, game consoles, DVD/Bluray players, DVD/HDD recorders, video cameras |
Information for electricians
A A - - - - L L .
5.1. Carrying out a functional test
Multimedia connection system is connected.
- Activate the desired functions and check the signal transmission at the signal sources and the playback device, e.g. play a DVD and check picture/sound reproduction on a television set.
The multimedia connection system is ready for operation.
6. Appendix
6.1. Technical data
Cinch Audio
Rated voltage: DC 50 V
Frequency ranges: 20 Hz ... 20 kHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100 MΩ
Electric strength: AC 500 V\~ (50/60 Hz)
for 1 min 2 mA
Insertion and removal forces: 3 ... 25 N
Insertion cycles: ≥ 1000
Gender changer: white (left), red (right)
Contact material:
Installation depth:
Ambient temperature:
gold-plated
14 mm
-5 ... +45 °C
TRS 3.5 mm
Rated voltage: DC 50 V
Frequency ranges: 20 Hz ... 20 kHz
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 100 MΩ
JUNG
Multimedia connection system
Ref.-no.: MA..
S-Video
Rated voltage: DC 50 V
Frequency ranges: ≤ 160 MHz
Contact resistance: ≤ 8
Insulation resistance: ≥ 50 MΩ
Electric strength: AC 500 V\~ (50/60 Hz)
for 1 min 2 mA
Insertion forces: ≤ 44.1 N
Removal forces: 5.88 ... 29.4 N
Insertion cycles: ≥ 1000
Gender changer: S-Video
Contact material: gold-plated
Ambient temperature: -5 ... +45 °C
VGA
Resolution:
≥ 800 x 600 pixels
≤ 1280 x 1024 pixels
S-VGA compatible
Frequency ranges: ≤ 160 MHz
Contact resistance: ≤ 30 mΩ
Insulation resistance:
≥ 1000 MΩ
Electric strength: AC 500 V\~ (50/60 Hz)
for 1 min 2 mA
Insertion forces:
43.9 N
Removal forces:
3.92 N
Insertion cycles:
≥ 500
Gender changer
15pole D-subminiature, 180°
Installation depth:
5 mm
Ambient temperature: -5 ... +45 °C
HDMI
Standard
HDMI 20a
JUNG
Multimedia connection system
Ref.-no.: MA..
Terminal: 180°
Installation depth: 17 mm
Installation note: Consider bending radius and various plug types. Ensure sufficient installation space.
6.2. Troubleshooting
No signal at the playback device after the signal sources is switched
on.
Cause 1: Playback device is not switched on.
- Switch on playback device.
Cause 2: Loose connector.
- Check that all connections are properly seated.
No video signal at the playback device after the signal sources is switched on.
Cause 1: Signal source is not recognised by the playback device.
- Manual selection of the signal source using remote control or channel selection buttons of the player.
Cause 2: VGA output of the signal source is not activated.
- Activate VGA output. Note information of the device manufacturer.
No audio signal at the playback device after the signal sources is switched on.
Cause 1: Volume control on the signal source or on the playback device is set too low.
- Increase volume.
Cause 2: The audio on the playback device is set to mute.
- Deactivate the mute function. Note information of the device